Search

The influence of mixing process (in a two-roll mill, high-speed mixer, or twin-screw extruder) on the strength properties of polypropylene/wood fiber composites was studied. The best results were obtained for composites compounded in a twin-screw extruder. The water uptake and the influence of moisture on the flexural strength (σfl) and modulus (Efl) were studied by immersion of the composites in water at 20, 50, and 90°C. Most strongly the moisture affected the value of Efl, but the degree of water uptake and the change in σfl and Efl also depended on temperature and the presence of a modificator—maleated polypropylene (MAH). MAH improved the strength properties of the composites both in dry and wet states and also decreased the extent of water uptake and swelling in cyclic (soaking/drying) tests. [ABSTRACT FROM AUTHOR]

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. [ABSTRACT FROM AUTHOR]