Search

• Development of a spherical robot that can leap while rolls. • Using a five-bar linkage mechanism and a release/retract mechanism for leaping. • Using a differential drive to actuate two semi spheres for rolling and turning. • Dynamics of rolling and leaping are analyzed. • The robot can leap up to 1.14-times of radius to overcome a barrier while rolls. To improve robots' mobility on flat ground and rough terrain, we designed and implemented a novel spherical robot with a combined rolling and leaping capability. The robot has two individually driven semi-spheres, which generate rolling and turning motions. The robot also has a five-bar linkage with a release/retract mechanism for leaping. The release/retract mechanism only uses one DOF to control and switch the mechanism in three different stages: retracting, maintaining, and releasing. In this paper, the dynamics of the robot in rolling and leaping are analyzed. The robot was empirically built, and its performance was experimentally evaluated. The results confirm that the robot can leap close to 25.4 cm diameter of the sphere, which, to the best of our knowledge, is the best among reported spherical robots. The robot can also leap while rolling over a 14 cm barrier, which is equal to 1.14 times the sphere's radius. [Display omitted] [ABSTRACT FROM AUTHOR]

• A novel module capable of fast transforming its shape between a wheel and a leg. • The maximum leg length approximately 3.4 times the wheel radius. • Can perform wheel-to-leap behavior. • Leaping height up to 4.6 times the wheel radius. We report on the development of a novel two-degrees-of-freedom module capable of transforming its shape between a wheel and a leg, with the length of the latter approximately 3.4 times the wheel radius. The leg-wheel module was empirically built and experimentally evaluated. It utilizes a linkage mechanism and can perform a smooth yet rapid leg-wheel transition within 0.25 s. The design concept, selection of the linkage parameters, and kinematics are described in this paper. The rapid transition from a wheel to a leg endows the robot with wheel-to-leap behavior. The general motion planning strategy of the leg-wheel, as well as the wheel-to-leap behavior, are explained in the demonstration example. The results confirm that the module can perform wheel-to-leap behavior with a height of up to 4.6 times the wheel radius. [ABSTRACT FROM AUTHOR]