1. Microstructure, Hardness, and Residual Stress of the Dissimilar Metal Weldments of SA508-309L/308L-304L
- Author
-
Weicheng Zhong, Yan Chen, Benjamin J. Sutton, Jun Li Lin, Brent J. Heuser, Ke An, and Zhen Li
- Subjects
010302 applied physics ,Structural material ,Materials science ,Number density ,Metallurgy ,0211 other engineering and technologies ,Metals and Alloys ,02 engineering and technology ,Condensed Matter Physics ,Microstructure ,01 natural sciences ,Carbide ,Mechanics of Materials ,Residual stress ,Martensite ,0103 physical sciences ,Stress corrosion cracking ,Dislocation ,021102 mining & metallurgy - Abstract
A dissimilar metal weldment consisting of SA508-309L-308L-304L is widely used in light-water nuclear reactors. These weldments demonstrate dissimilar susceptibility to stress corrosion cracking that are related to the microstructure, properties, and residual stress. In this work, microstructures, hardness, and the residual stress distribution of the dissimilar metal weldments were investigated, with the correlation of increased hardness in the heat-affected zone (HAZ) to the microstructure. 304L HAZ demonstrated similar grain morphology as the base material, and the increase in hardness was primarily attributed to the increased dislocation density. SA508 HAZ demonstrated a change of grain morphology resulting from the different peak temperatures and cooling rates. The increased hardness in the SA508 HAZ was attributed to the refined grain morphology, higher dislocation density, and higher number density of precipitates. A ~ 20–30-μm-wide martensitic zone formed at the fusion boundary of SA508-309L, where Cr-rich carbide precipitates were observed, with the average size and the number density of 44.1 ± 16.9 nm and 1.5 × 1021 m−3, respectively. Residual stress results demonstrated the largest tensile stress at 309L butter, indicating its high cracking susceptibility.
- Published
- 2021
- Full Text
- View/download PDF