Search

Various international organizations and governments of many countries are making efforts to prevent environmental pollution, with the IMO (International Maritime Organization) reinforcing related regulations. With these regulations, equipment related to LNG-fueled ships, which have the greatest carbon dioxide reduction effect among eco-friendly ships, are expected to increase. Although the IGC code designates the materials that can be used for LNG containers, such as 304L stainless steel and 9% nickel steel, these materials have a tendency to deteriorate the tissue around the heat-affected zone due to excessive heat input. In this study, we analyzed the effect of brittle fracture in the weld zone and heat-affected zone after fiber laser welding and found that welding quality improved with control of the heat input. SVM discriminant analysis was applied to classify the groups in which brittle fracture and ductile fracture occurred. The shape of the penetration section, hardness in the welding zone and heat-affected zone, and fracture surface were selected as factors for discrimination; these values were determined under various welding conditions. With these data, we derived a regression model and multi-objective optimization algorithm to predict mechanical properties after welding, as well as the conditions necessary to prevent brittle fracture. Finally, the prediction models were verified, as the results of welding under the derived conditions were classified as ductile fracture group.

The International Maritime Organization has adopted the reduction of carbon dioxide emissions from ships as an important priority, and is continuously strengthening its regulations on marine air pollution. By 2035, it is expected that LNG-powered ships will account for more than 50% of the available ships. Accordingly, the demand for equipment related to LNG-fueled ships is expected to grow as well, requiring the development of a lot of equipment. However, the characteristics of LNG-powered ships mean that they require a high level of reliability and long history of operating reliably. Even when a product is developed, numerous demonstrations and quality assurance measures are needed to reach the technological level ship owners and customers require. Therefore, an optimization procedure to determine the welding quality for 9% Ni steel is necessary. In this study, the heat input criteria that induce brittle fracture characteristics were analyzed to optimize the flux core arc welding process for 9% Ni steel used in the manufacture of LNG storage tanks. We developed an optimization algorithm (Welding Current, Arc Voltage, Welding Speed) that can select a group of fracture conditions by examining the tendency of the tissue to brittle fracture due to excessive heat input among potential quality issues of cryogenic steel. Capable of selecting the range in which quality deterioration occurs, determining quality of a weld and avoiding the range in which toughness degradation occurs, through which a process to derive high quality 9% Ni welds is proposed.

As a result of strengthened sulfur content standards for ship fuel oil in IMO regulations, major domestic and foreign carriers have a high and growing demand for liquefied natural gas (LNG) powered ships and related equipment. For LNG operation in a cryogenic environment, a storage tank and fuel supply system that uses steel with excellent brittleness and fatigue strength is required. Ships that use LNG have a high vulnerability to explosion and fire. For this reason, 9% Ni is typically used, since a ship requires high quality products with special materials and structural technologies that guarantee operability at cryogenic temperatures. However, there is an urgent need for research to derive a uniform welding quality, since high process difficulty and differences in welding quality related to a welder’s skills can cause a deterioration of the weld quality in the 9% Ni steel welding process. For 9% Ni steel, the higher the dilution ratio of the base metal, the lower the strength. In order to secure the required strength, excessive dilution of the base metal should be avoided, and the relationship between dilution ratio and strength should be investigated. According to previous research, if it exceeds 25% it may be lower than the API standard of 363 MPa for hardening welds. Therefore, in this study, the flux cored arc welding process is performed by establishing criteria that can be evaluated based on the SVM method in order to determine the structure of the weld to be cured according to the dilution rate of the base metal. We would like to propose a multipurpose optimization algorithm to ensure uniform quality of 9% Ni steel.

The demand for LNG-powered ships and related equipment is rapidly increasing among major domestic and foreign carriers due to the strengthened IMO regulations on the sulfur content of ship fuel oil. LNG operation in a cryogenic environment requires a storage tank and fuel supply system that uses steel with excellent brittleness and fatigue strength. A ship using LNG is very sensitive to explosion and fire. For this reason, 9% Ni is often used, because ships require high quality products with special materials and structural technologies that ensure operability at cryogenic temperatures. However, research to derive uniform welding quality is urgent because the deterioration of weld quality in the 9% Ni steel welding process is caused by high process difficulty and differences in welding quality depending on a welder’s skill set. This study proposes a method to guarantee a uniform quality of 9% Ni steel in a fiber laser welding process by categorizing weld joint hardness according to the dilution ratio of a base material and establishing a standard for quantitative evaluation.