Search

Abstract Background Oleaginous yeasts are able to accumulate very high levels of neutral lipids especially under condition of excess of carbon and nitrogen limitation (medium with high C/N ratio). This makes necessary the use of two-steps processes in order to achieve high level of biomass and lipid. To simplify the process, the decoupling of lipid synthesis from nitrogen starvation, by establishing a cytosolic acetyl-CoA formation pathway alternative to the one catalysed by ATP-citrate lyase, can be useful. Results In this work, we introduced a new cytoplasmic route for acetyl-CoA (AcCoA) formation in Rhodosporidium azoricum by overexpressing genes encoding for homologous phosphoketolase (Xfpk) and heterologous phosphotransacetylase (Pta). The engineered strain PTAPK4 exhibits higher lipid content and produces higher lipid concentration than the wild type strain when it was cultivated in media containing different C/N ratios. In a bioreactor process performed on glucose/xylose mixture, to simulate an industrial process for lipid production from lignocellulosic materials, we obtained an increase of 89% in final lipid concentration by the engineered strain in comparison to the wild type. This indicates that the transformed strain can produce higher cellular biomass with a high lipid content than the wild type. The transformed strain furthermore evidenced the advantage over the wild type in performing this process, being the lipid yields 0.13 and 0.05, respectively. Conclusion Our results show that the overexpression of homologous Xfpk and heterologous Pta activities in R. azoricum creates a new cytosolic AcCoA supply that decouples lipid production from nitrogen starvation. This metabolic modification allows improving lipid production in cultural conditions that can be suitable for the development of industrial bioprocesses using lignocellulosic hydrolysates.

Abstract The use of fossil fuels has been strongly related to critical problems currently affecting society, such as: global warming, global greenhouse effects and pollution. These problems have affected the homeostasis of living organisms worldwide at an alarming rate. Due to this, it is imperative to look for alternatives to the use of fossil fuels and one of the relevant substitutes are biofuels. There are different types of biofuels (categories and generations) that have been previously explored, but recently, the use of microalgae has been strongly considered for the production of biofuels since they present a series of advantages over other biofuel production sources: (a) they don’t need arable land to grow and therefore do not compete with food crops (like biofuels produced from corn, sugar cane and other plants) and; (b) they exhibit rapid biomass production containing high oil contents, at least 15 to 20 times higher than land based oleaginous crops. Hence, these unicellular photosynthetic microorganisms have received great attention from researches to use them in the large-scale production of biofuels. However, one disadvantage of using microalgae is the high economic cost due to the low-yields of lipid content in the microalgae biomass. Thus, development of different methods to enhance microalgae biomass, as well as lipid content in the microalgae cells, would lead to the development of a sustainable low-cost process to produce biofuels. Within the last 10 years, many studies have reported different methods and strategies to induce lipid production to obtain higher lipid accumulation in the biomass of microalgae cells; however, there is not a comprehensive review in the literature that highlights, compares and discusses these strategies. Here, we review these strategies which include modulating light intensity in cultures, controlling and varying CO2 levels and temperature, inducing nutrient starvation in the culture, the implementation of stress by incorporating heavy metal or inducing a high salinity condition, and the use of metabolic and genetic engineering techniques coupled with nanotechnology.

Abstract Background Oleaginous yeasts are fast emerging as a possible feedstock for biodiesel production. Yarrowia lipolytica, a model oleaginous yeast is known to utilize a variety of hydrophobic substrates for lipid accumulation including waste cooking oil (WCO). Approaches to increase lipid content in this yeast include metabolic engineering which requires manipulation of multiple genes in the lipid biosynthesis pathway. A classical and cost-effective approach, namely, random chemical mutagenesis on the yeast can lead to increased production of biodiesel as is explored here. Results In this study, chemical mutagenesis using the alkylating agent, N- methyl-N′-nitro-N-nitrosoguanidine (MNNG) as well as an additional treatment with cerulenin, a fatty acid synthase inhibitor generated 800 mutants of Y. lipolytica NCIM 3589 (761 MNNG treated and 39 MNNG + cerulenin treated). A three-stage screening using Sudan Black B plate technique, Nile red fluorimetry and total lipid extraction using solvent was performed, which enabled selection of ten high lipid yielding mutants. Time course studies of all the ten mutants were further undertaken in terms of biomass, lipid yield and lipid content to select three stable mutants (YlB6, YlC7 and YlE1) capable of growing and accumulating lipid on WCO, with lipid contents of 55, 60 and 67% as compared to 45% for the wild type. The mutants demonstrated increased volumetric lipid productivities (0.062, 0.044 and 0.041 g L−1 h−1) as compared to the wild type (0.033 g L−1 h−1). The fatty acid profile of the three mutants consisted of a high content of C16 and C18 saturated and monounsaturated fatty acids and was found to be suitable for biodiesel production. The fuel properties, namely, density, kinematic viscosity, total acid number, iodine value of the three mutants were evaluated and found to lie within the limits specified by internationally accepted standards. Additionally, it was noted that the mutants demonstrated better cetane numbers and higher heating values than the wild type strain. Conclusion The chemical mutagenesis strategy adopted in this study resulted in the successful isolation of three stable high SCO yielding mutants. The mutants, namely, YlB6, YlC7 and YlE1 exhibited a 1.22, 1.33 and 1.49-fold increase in lipid contents when grown on 100 g L−1 waste cooking oil than the parental yeast strain. The fatty acid methyl ester (FAME) profiles of all the three mutants was determined to be suitable for biodiesel suggesting their potential applicability while simultaneously addressing the management of waste cooking oil.

Background: Oleaginous yeasts are fast emerging as a possible feedstock for biodiesel production. Yarrowia lipolytica, a model oleaginous yeast is known to utilize a variety of hydrophobic substrates for lipid accumulation including waste cooking oil (WCO). Approaches to increase lipid content in this yeast include metabolic engineering which requires manipulation of multiple genes in the lipid biosynthesis pathway. A classical and cost-effective approach, namely, random chemical mutagenesis on the yeast can lead to increased production of biodiesel as is explored here. Results: In this study, chemical mutagenesis using the alkylating agent, N-methyl-N'-nitro-N-nitrosoguanidine (MNNG) as well as an additional treatment with cerulenin, a fatty acid synthase inhibitor generated 800 mutants of Y. lipolytica NCIM 3589 (761 MNNG treated and 39 MNNG + cerulenin treated). A three-stage screening using Sudan Black B plate technique, Nile red fluorimetry and total lipid extraction using solvent was performed, which enabled selection of ten high lipid yielding mutants. Time course studies of all the ten mutants were further undertaken in terms of biomass, lipid yield and lipid content to select three stable mutants (YlB6, YlC7 and YlE1) capable of growing and accumulating lipid on WCO, with lipid contents of 55, 60 and 67% as compared to 45% for the wild type. The mutants demonstrated increased volumetric lipid productivities (0.062, 0.044 and 0.041 g L-1 h-1) as compared to the wild type (0.033 g L-11 h-1). The fatty acid profile of the three mutants consisted of a high content of C16 and C18 saturated and monounsaturated fatty acids and was found to be suitable for biodiesel production. The fuel properties, namely, density, kinematic viscosity, total acid number, iodine value of the three mutants were evaluated and found to lie within the limits specified by internationally accepted standards. Additionally, it was noted that the mutants demonstrated better cetane numbers and higher heating values than the wild type strain. Conclusion: The chemical mutagenesis strategy adopted in this study resulted in the successful isolation of three stable high SCO yielding mutants. The mutants, namely, YlB6, YlC7 and YlE1 exhibited a 1.22, 1.33 and 1.49-fold increase in lipid contents when grown on 100 g L-1 waste cooking oil than the parental yeast strain. The fatty acid methyl ester (FAME) profiles of all the three mutants was determined to be suitable for biodiesel suggesting their potential applicability while simultaneously addressing the management of waste cooking oil. [ABSTRACT FROM AUTHOR]

Background: Because the model yeast Yarrowia lipolytica can synthesize and store lipids in quantities up to 20% of its dry weight, it is a promising microorganism for oil production at an industrial scale. Typically, optimization of the lipid production process is performed in the laboratory and later scaled up for industrial production. However, the scale-up process can be complicated by genetic modifications that are optimized for one set of growing conditions can confer a less-than-optimal phenotype in a different environment. To address this issue, small cultivation systems have been developed that mimic the conditions in benchtop bioreactors. In this work, we used one such microbioreactor system, the BioLector, to develop high-throughput fermentation procedures that optimize growth and lipid accumulation in Y. lipolytica. Using this system, we were able to monitor lipid and biomass production in real time throughout the culture duration. Results: The BioLector can monitor the growth of Y. lipolytica in real time by evaluating scattered light; this produced accurate measurements until cultures reached an equivalent of OD600nm = 115 and a cell dry weight of 100 g L-1. In addition, a lipid-specific fluorescent probe was applied which reliably monitored lipid production up to a concentration of 12 g L-1. Through screening various growing conditions, we determined that a carbon/nitrogen ratio of 35 was the most efficient for lipid production. Further screening showed that ammonium chloride and glycerol were the most valuable nitrogen and carbon sources, respectively, for growth and lipid production. Moreover, a carbon concentration above 1 M appeared to impair growth and lipid accumulation. Finally, we used these optimized conditions to screen engineered strains of Y. lipolytica with high lipid-accumulation capability. The growth and lipid content of the strains cultivated in the BioLector were compared to those grown in benchtop bioreactors. Conclusion: To our knowledge, this is the first time that the BioLector has been used to track lipid production in real time and to monitor the growth of Y. lipolytica. The present study also showed the efficacy of the BioLector in screening growing conditions and engineered strains prior to scale-up. The method described here could be applied to other oleaginous microorganisms. [ABSTRACT FROM AUTHOR]