Search

Discharge mode is an important parameter for ozone synthesis by dielectric barrier discharge (DBD). Currently, it is still challenging to stably generate glow discharge with oxygen at atmospheric pressure. In this paper, a DBD reactor with a layer of silver placed between the electrode and the dielectric layer (SL-DBD) was developed. Experimental results show that both streamer and glow corona discharge were stably generated under sinusoidal excitation with a 0.5 mm discharge gap in a parallel-plate DBD, due to the increased electric field strength in the discharge gap by the silver layer. It was also found that, in the SL-DBD reactor, glow corona discharge enhances the discharge strength by 50 times. The spectral peak of O at 777 nm in SL-DBD is increased to 28,800, compared with 18,389 in a reactor with a streamer only. The SL-DBD reactor produces ozone with a concentration of as high as 150 g/m3 and shows good stability in an 8 h durability test.

A microfluidic lab-on-chip device was developed to automatically and selectively manipulate target cells at the single cell level. The device is composed of a microfluidic chip, mini solenoid valves with negative-pressurized soft tubes, and a LabView®-based data acquisition device. Once a target cell passes the resistive pulse sensing gate of the microfluidic chip, the solenoid valves are automatically actuated and open the negative-pressurized tubes placed at the ends of the collecting channels. As a result, the cell is transported to that collecting well. Numerical simulation shows that a 0.14 mm3 volume change of the soft tube can result in a 1.58 mm/s moving velocity of the sample solution. Experiments with single polystyrene particles and cancer cells samples were carried out to demonstrate the effectiveness of this method. Selectively manipulating a certain size of particles from a mixture solution was also achieved. Due to the very high pressure-driven flow switching, as many as 300 target cells per minute can be isolated from the sample solution and thus is particularly suitable for manipulating very rare target cells. The device is simple, automatic, and label-free and particularly suitable for isolating single cells off the chip one by one for downstream analysis.

The resistive pulse sensing (RPS) method based on the Coulter principle is a powerful method for particle counting and sizing in electrolyte solutions. With the advancement of micro- and nano-fabrication technologies, microfluidic and nanofluidic resistive pulse sensing technologies and devices have been developed. Due to the unique advantages of microfluidics and nanofluidics, RPS sensors are enabled with more functions with greatly improved sensitivity and throughput and thus have wide applications in fields of biomedical research, clinical diagnosis, and so on. Firstly, this paper reviews some basic theories of particle sizing and counting. Emphasis is then given to the latest development of microfuidic and nanofluidic RPS technologies within the last 6 years, ranging from some new phenomena, methods of improving the sensitivity and throughput, and their applications, to some popular nanopore or nanochannel fabrication techniques. The future research directions and challenges on microfluidic and nanofluidic RPS are also outlined.