Search

The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small (~0.5 m) and large (~6 m) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup.

The Advanced Atacama Cosmology Telescope Polarimeter (AdvACT) is an upgraded instrument for the Atacama Cosmology Telescope, which uses transition-edge sensor (TES) detector arrays to measure cosmic microwave background (CMB) polarization anisotropies in multiple frequency bands. We review the integration and characterization of the final polarimeter array, which is the low frequency (LF) array, consisting of 292 TES bolometers observing in two bands centered at 27 GHz and 39 GHz. This array is sensitive to synchrotron radiation from our galaxy as well as to the CMB, and complements the AdvACT arrays operating at 90, 150 and 230 GHz to provide robust detection and removal of foreground contamination. We present detector parameters for the LF array measured in the lab, including saturation powers, critical temperatures, thermal conductivities, time constants and optical efficiencies, and their uniformity across the entire wafer.

The mm-wavelength sky reveals the initial phase of structure formation, at all spatial scales, over the entire observable history of the Universe. Over the past 20 years, advances in mm-wavelength detectors and camera systems have allowed the field to take enormous strides forward – particularly in the study of the Cosmic Microwave Background – but limitations in mapping speeds, sensitivity and resolution have plagued studies of astrophysical phenomena. In fact, limitations due to inherent biases in the ground-based mm-wavelength surveys conducted over the last 2 decades continue to motivate the need for deeper and wider-area maps made with increased angular resolution. TolTEC is a new camera that will fill the focal plane of the 50m diameter Large Millimeter Telescope (LMT) and provide simultaneous, polarization-sensitive imaging at 2.0, 1.4, and 1.1mm wavelengths. The instrument, now under construction, is a cryogenically cooled receiver housing three separate kilo-pixel arrays of Kinetic Inductance Detectors (KIDs) that are coupled to the telescope through a series of silicon lenses and dichroic splitters. TolTEC will be installed and commissioned on the LMT in early 2019 where it will become both a facility instrument and also perform a series of 100 hour “Legacy Surveys” whose data will be publicly available. The initial four surveys in this series: the Clouds to Cores Legacy Survey, the Fields in Filaments Legacy Survey, the Ultra-Deep Legacy Survey and the Large Scale Structure Survey are currently being defined in public working groups of astronomers coordinated by TolTEC Science Team members. Data collection for these surveys will begin in late 2019 with data releases planned for late 2020 and 2021. Herein we describe the instrument concept, provide performance data for key subsystems, and provide an overview of the science, schedule and plans for the initial four Legacy Survey concepts.

The Primordial Inflation Polarization ExploreR (PIPER) is a balloon-borne instrument optimized to measure the polarization of the CMB at large angular scales. It will map 85% of the sky over a series of conventional balloon flights from the Northern and Southern hemispheres, measuring the B-mode polarization power spectrum over a range of multipoles from 2-300 covering both the reionization bump and the recombination peak, with sensitivity to measure the tensor-to-scalar ratio down to r = 0.007. PIPER will observe in four frequency bands centered at 200, 270, 350, and 600 GHz to characterize dust foregrounds. The instrument has background-limited sensitivity provided by fully cryogenic (1.7 K) optics focusing the sky signal onto kilo-pixel arrays of time-domain multiplexed Transition-Edge Sensor (TES) bolometers held at 100 mK. Polarization sensitivity and systematic control are provided by front-end Variable-delay Polarization Modulators (VPMs). PIPER had its engineering ight in October 2017 from Fort Sumner, New Mexico. This papers outlines the major components in the PIPER system discussing the conceptual design as well as specific choices made for PIPER. We also report on the results of the engineering flight, looking at the functionality of the payload systems, particularly VPM, as well as pointing out areas of improvement.

The search for inflationary primordial gravitational waves and the measurement of the optical depth to reionization, both through their imprint on the large angular scale correlations in the polarization of the cosmic microwave background (CMB), has created the need for high sensitivity measurements of polarization across large fractions of the sky at millimeter wavelengths. These measurements are subject to instrumental and atmospheric 1=f noise, which has motivated the development of polarization modulators to facilitate the rejection of these large systematic effects. Variable-delay polarization modulators (VPMs) are used in the Cosmology Large Angular Scale Surveyor (CLASS) telescopes as the first element in the optical chain to rapidly modulate the incoming polarization. VPMs consist of a linearly polarizing wire grid in front of a movable flat mirror. Varying the distance between the grid and the mirror produces a changing phase shift between polarization states parallel and perpendicular to the grid which modulates Stokes U (linear polarization at 45°) and Stokes V (circular polarization). The CLASS telescopes have VPMs as the first optical element from the sky; this simultaneously allows a lock-in style polarization measurement and the separation of sky polarization from any instrumental polarization further along in the optical path. The CLASS VPM wire grids use 50 μm copper-plated tungsten wire with a 160μm spacing across a 60 cm clear aperture. The mirror is mounted on a flexure system with one degree of translational freedom, enabling the required mirror motion while maintaining excellent parallelism with respect to the wire grid. The wire grids and mirrors are held parallel to each other to better than 80 μm, and the wire grids have RMS flatness errors below 50 μm across the 60 cm aperture. The Q-band CLASS VPM was the first VPM to begin observing the CMB full time, starting in the Spring of 2016. The first W-band CLASS VPM was installed in the Spring of 2018.

International audience; The Simons Observatory (SO) will measure the cosmic microwave background (CMB) in both temperature and polarization over a wide range of angular scales and frequencies from 27-270 GHz with unprecedented sensitivity. One technology for coupling light onto the ~50 detector wafers that SO will field is spline-profiled feedhorns, which offer tunability between coupling efficiency and control of beam polarization leakage effects. We will present efforts to scale up feedhorn production for SO and their viability for future CMB experiments, including direct-machining metal feedhorn arrays and laser machining stacked Si arrays.