Search

This study focuses on the relationship between U and pyrochlore in the world-class Sn-Nb-Ta (U, Th, REE, Li) Madeira deposit within the Pitinga mining district of northern Brazil. The primary U mineralization is of intrusive-type and early magmatic origin, hosted in the peralkaline albite-enriched granite facies of the A-type Madeira granite (~1820 Ma). U-Pb-LREE-enriched pyrochlore is the only primary U ore and is widely and homogeneously dispersed in two albite-enriched granite subfacies: the albite-enriched granite core (AGC) and the albite-enriched granite border (AGB). In both zones, the pyrochlore crystals underwent strong hydrothermal alteration by F-rich, low-temperature aqueous fluids. During this hypogene alteration process, cations such as LREE, Nb, and F were selectively released, while others like Fe and Si were introduced. This led to the successive formation of various secondary pyrochlore varieties and a relative enrichment of U (up to 13.73 wt.% UO2). The alteration of pyrochlore eventually resulted in the breakdown of its structure, leading to the formation of U-bearing columbite pseudomorphs and the precipitation of U-rich silicates (up to 34.35 wt.% UO2), galena, and LREE-rich fluorides within pyrochlore vugs. In contrast to the homogeneous distribution of the primary ore mineralization, the secondary pyrochlore mineralization shows striking zonation, being most intense in the AGB and AGC proximal to a massive cryolite deposit. The U mineralization in the Madeira deposit exhibits grades of 328 ppm UO2, comparable to the main deposits of this type, with significant reserves of up to 52 kt U. However, it is different from those deposits in four key aspects: homogeneous dispersion of mineralization; pyrochlore as the exclusive primary ore mineral; U and Th mineralizations formed at different stages; and intense hydrothermal alteration. These characteristics are attributed to the special conditions imposed by the fluorine-rich nature of the peralkaline magma. [ABSTRACT FROM AUTHOR]

Sediment samples from the Săsar River and its main tributaries were analyzed for their potentially toxic elements at the site of the Romplumb metallurgical company and near the well-known Pb-Zn-Cu epithermal deposit of Baia Sprie located in the Neogene volcanic chain of the Eastern Carpathians, Romania. The average metal concentrations arranged in order of decreasing abundance are as follows (mg·kg−1): Mn (4098) > Zn (2093) > Pb (918) > Cu (489) > As (160) > Cr (37.51) > Ni (30.25) > Co (28.13) > Cd (9.72) > Hg (1.81). Several pollution indices were successfully used to assess the degree of contamination and ecological risk. The majority of sampling sites indicate high degrees of pollution, with two major hotspots identified. There are further sources, such as the Șuior (Pb-Zn-Au) and Săsar (Au-Ag) epithermal deposits, Cuprom company, and Bozânta tailing ponds, identified as contaminants. The Baia Mare mining district is causing a serious threat to the aquatic systems in the region, and it can be taken as a reference area for the human impact derived from the mining of mineral deposits of Au-Ag-Cu-Pb-Zn. It is imperative to reduce ecological risks and thereby protect the population living within this abandoned mining area. [ABSTRACT FROM AUTHOR]

The "natural GMS laboratory" (granulometry-morphometry-situmetry) is located within the Variscan Basement in SE Germany (Fichtelgebirge Mts.), which is uplifted relative to its Permo-Mesozoic foreland along a deep-seated lineamentary fault zone. This transitional study area is crossed by straight to low drainage systems in the basement, turning meandering channel systems into high sinuosity when entering the foreland. Due to its good geological coverage, the entire region is subjected to an advanced-level terrain analysis and completed with a sedimentological study focusing on the GMS tool. Unlike many applications in the past, the three components of the GMS tool that are of almost equal value ought to be used in combination and not as stand-alone procedures so as to be integrated into other near-surface geoscientific methods, e.g., sediment petrography. The strong points of granulometry of coarse-grained/gravel-sized sediments are its extension into the smaller sand and clay grain size intervals using the sorting, mean and/or median values for an environmental analysis. Morphometry can be linked to the compositional geosciences, e.g., mineralogy and geochemistry. The grain shape is intimately connected with the lithology, providing options from triaxial measuring of the lithoclast to the digital image analysis. It is a favorable tool to supplement the provenance of lithoclasts. Situmetry is the key element of hydrodynamic research and directly builds upon its sister methods. Its applications and numerical approaches are useful for the identification and quantification of physical land-forming processes. It is the fan sharpness and the orientation of lithoclasts relative to the direction of the talweg and in relation cross-sectional valley features that integrate the GMS tool into geological and geomorphological mapping, both of which result in a digital terrain model. Horizontal rose diagrams are useful for the upper reaches of drainage systems, be they of alluvial or non-alluvial types, and vertical ones for alluvial channels in the distal and proximal foreland where stacked patterns of depositional terraces are of widespread occurrence. In general, the GMS tool can be applied to sedimentological, geomorphological, petrographic and tectonic objects in basements and foreland basins; in applied geosciences, it is suitable for the identification of mineral resources and of areas vulnerable to geohazards, and in genetic geosciences for the discrimination of supergene chemical and physical depositional and land-forming processes. [ABSTRACT FROM AUTHOR]

A holistic-modular approach has been taken to study the evolution of three straight to low-sinuosity drainage systems (=SSS) in an uplifted basement block of the Central European Variscides. The development of the SSS is described by means of a quadripartite model. (1) The geological framework of the SSS: Forming the lithological and structural features in the bedrock as a result of different temperature, pressure and dynamic-metamorphic processes. (2) Prestage of SSS: Forming the paleo-landscape with a stable fluvial regime as a starting point for the SSS. (3) Proto-SSS: Transition into the metastable fluvial regime of the SSS. (4) Modern SSS: Operation of the metastable fluvial regime Tectonics plays a dual role. Late Paleozoic fold tectonic creates the basis for the studied SSS and has a guiding effect on the development of morphotectonic units during the Neogene and Quaternary. Late Cenozoic fault tectonics triggered the SSS to incise into the Paleozoic basement. The change in the bedrock lithology has an impact on the fluvial and colluvial sediments as well as their landforms. The latter reflects a conspicuous modification: straight drainage system ⇒ higher sinuosity and paired terraces ⇒ hillwash plains. Climate change has an indirect effect controlling via the bedrock the intensity of mechanical and chemical weathering. The impact on the development of the SSS can be assessed as follows: Tectonics >> climate ≅ bedrock lithology. The three parameters cause a facies zonation: (1) wide-and-shallow valley (Miocene), (2) wide-angle V-shaped valley (Plio-Pleistocene), (3) acute-angle V-shaped valley (Pleistocene), (4) V-shaped to U-shaped valleys (Pleistocene-Holocene). Numerical data relevant for the hydrographic studies of the SSS are determined in each reference area: (1) Quantification of fluvial and colluvial deposits along the drainage system, (2) slope angles, (3) degree of sinuosity as a function of river facies, (4) grain size distribution, (5) grain morphological categorization, (6) grain orientation ("situmetry"), (7) channel density, (8) channel/floodplain ratios. Thermodynamic computations (Eh, pH, concentration of solubles) are made to constrain the paleoclimatic regime during formation of the SSS. The current model of the SSS is restricted in its application to the basement of the Variscan-Type orogens, to an intermediate crustal maturity state. [ABSTRACT FROM AUTHOR]

The mining district of Nefza-Sejnane (Tunisia) encloses numerous ores and raw material deposits, all formed in relation with successive Fe-rich fluids of meteoric and/or hydrothermal origins. Here, for the first time in Tunisia, (U-Th)/He ages were obtained on supergene goethite from various localities/deposits of the district highlight direct dating of significant weathering episodes during late Tortonian and late Pleistocene. These weathering events are most likely associated with favorable conditions that combine (i) wet climate displaying sufficient meteoric water/fluid; and (ii) regional exhumation, due to large-scale vertical lithospheric movements enhancing the percolation of fluids. Matched with previous works, these results refine the stratigraphic frame for the polymetallic mineralization and clay deposits in the district, confirming the influence of meteoric fluids circulation during the late Cenozoic. As a consequence of the new (U-Th)/He data, we moreover propose a taxonomic and stratigraphic revision of the well-known mammalian fauna from the Fe-rich Douahria locality, suggesting an early Tortonian age for the fossils, i.e., prior to the first episode of meteoric event in the area. [ABSTRACT FROM AUTHOR]

The eastern Pontide tectonic belt (EPTB) contains greater than 350 identified Kuroko type volcanogenic massive sulfide deposits/mineralization/occurrences (VMSD). The deposits are associated with Late Cretaceous felsic volcanics consisting mainly of dacitic and rhyolitic lavas and pyroclastics that outcrop within a narrow zone running parallel to the eastern Black Sea coast and represent the axial zone of a paleo-magmatic arc. The Cerattepe deposit is the second-largest and is a hybrid VMS system with some epithermal features. To date, no geochemical research constrains the origin and timing of mineralization in the Cerattepe VMS deposit. Here, we provide Cu, O, H and S, isotope analysis of ores and alteration minerals to understand the hydrothermal history of the deposit and date the massive ore with Re-Os geochronology. Secondary weathering mobilized and redistributed metals in the deposit. The copper isotope signatures of shallow ores in the gossan follow patterns resulting from oxidative weathering of copper minerals with gossan Fe oxides of δ65Cu = −2.59‰, enrichment zone copper sulfide of d65Cu = +2.23 and +1.73‰, and primary ores of δ65Cu = +0.71 and +0.41‰. At the boundary of the enrichment zone, further cycling and migration of enrichment zone copper are evidenced by two samples having larger ranges of the δ65Cu = +3.59‰, and −2.93‰. Evidence for a magmatic source for fluids and S are evidenced by the O and H isotope values from quartz veins (δ18O = +7.93‰ to +10.82‰, and δD = −78‰ and −68‰) and sulfides that possess δ34S ratios of –5 and 0‰ from drill core samples. 187Os/188Os–187Re/188Os ratios from drill core sulfide samples of Cerattepe VMS deposit yields a 62±3 Ma isochron age and a highly radiogenic Os initial ratio. This age is compatible with silicate alteration ages from a proximal deposit and clearly shows mineralization occurs at a much younger time than previously proposed for VMS mineralization in the eastern Pontides. The new Re-Os age and source of Os imply that mineralization in the area occurs at a distinctly younger interval in the back-arc basin and metals could be sourced from the surrounding host rocks. [ABSTRACT FROM AUTHOR]

In the current study, different heavy minerals typical of gold placer deposits were identified by means of micro-Raman spectroscopy, and their chemical composition analyzed and discussed (garnet, kyanite, staurolite, zircon, allanite, monazite, xenotime, rutile, anatase, cassiterite, titanite, barite). Even complex solid solution series, such as those of garnets, can be deciphered with the aid of systematic trends observed in Raman line frequencies. The ν1 mode in garnets will shift from high to low frequencies as a function of the ionic radius of the X2+ cation, from Mg2+, to Fe2+ and Mn2+, while the presence of Ca2+ will make the band to be shifted strongly to even lower wavenumbers. This approach has successfully been taken to differentiate between polymorph triplets such as kyanite-sillimanite-andalusite and rutile-anatase-brookite. Minerals under consideration with high contents of REE, U and Th are affected by intensive metamictization, particularly zircon and titanite. Raman peak features, such as shape, symmetry and intensity, respond to this radiation damage of the lattice and enable fine-tuning of these heavy minerals, such as in the case of fluorite (fetid fluorite). [ABSTRACT FROM AUTHOR]

Gemstones form in metamorphic, magmatic, and sedimentary rocks. In sedimentary units, these minerals were emplaced by organic and inorganic chemical processes and also found in clastic deposits as a result of weathering, erosion, transport, and deposition leading to what is called the formation of placer deposits. Of the approximately 150 gemstones, roughly 40 can be recovered from placer deposits for a profit after having passed through the "natural processing plant" encompassing the aforementioned stages in an aquatic and aeolian regime. It is mainly the group of heavy minerals that plays the major part among the placer-type gemstones (almandine, apatite, (chrome) diopside, (chrome) tourmaline, chrysoberyl, demantoid, diamond, enstatite, hessonite, hiddenite, kornerupine, kunzite, kyanite, peridote, pyrope, rhodolite, spessartine, (chrome) titanite, spinel, ruby, sapphire, padparaja, tanzanite, zoisite, topaz, tsavorite, and zircon). Silica and beryl, both light minerals by definition (minerals with a density less than 2.8–2.9 g/cm3, minerals with a density greater than this are called heavy minerals, also sometimes abbreviated to "heavies". This technical term has no connotation as to the presence or absence of heavy metals), can also appear in some placers and won for a profit (agate, amethyst, citrine, emerald, quartz, rose quartz, smoky quartz, morganite, and aquamarine, beryl). This is also true for the fossilized tree resin, which has a density similar to the light minerals. Going downhill from the source area to the basin means in effect separating the wheat from the chaff, showcase from the jeweler quality, because only the flawless and strongest contenders among the gemstones survive it all. On the other way round, gem minerals can also be used as pathfinder minerals for primary or secondary gemstone deposits of their own together with a series of other non-gemmy material that is genetically linked to these gemstones in magmatic and metamorphic gem deposits. All placer types known to be relevant for the accumulation of non-gemmy material are also found as trap-site of gemstones (residual, eluvial, colluvial, alluvial, deltaic, aeolian, and marine shelf deposits). Running water and wind can separate minerals according to their physical-chemical features, whereas glaciers can only transport minerals and rocks but do not sort and separate placer-type minerals. Nevertheless till (unconsolidated mineral matter transported by the ice without re-deposition of fluvio-glacial processes) exploration is a technique successfully used to delineate ore bodies of, for example, diamonds. The general parameters that matter during accumulation of gemstones in placers are their intrinsic value controlled by the size and hardness and the extrinsic factors controlling the evolution of the landscape through time such as weathering, erosion, and vertical movements and fertility of the hinterland as to the minerals targeted upon. Morphoclimatic processes take particular effect in the humid tropical and mid humid mid-latitude zones (chemical weathering) and in the periglacial/glacial and the high-altitude/mountain zones, where mechanical weathering and the paleogradients are high. Some tectono-geographic elements such as unconformities, hiatuses, and sequence boundaries (often with incised valley fills and karstic landforms) are also known as planar architectural elements in sequence stratigraphy and applied to marine and correlative continental environments where they play a significant role in forward modeling of gemstone accumulation. The present study on gems and gemstone placers is a reference example of fine-tuning the "Chessboard classification scheme of mineral deposits" (Dill 2010) and a sedimentary supplement to the digital maps that form the core of the overview "Gemstones and geosciences in space and time" (Dill and Weber 2013). [ABSTRACT FROM AUTHOR]