Search

The geological disposal of high-level radioactive waste is the final step in the nuclear fuel cycle. It is realized via isolating the high-level radioactive waste in the geological environment with an appropriate system of engineered barriers. Radionuclides-containing materials must be isolated from the biosphere until the radioactivity contained in them has diminished to a safe level. In the case of high-level radioactive waste, it could take hundreds of thousands of years. Within such a long timescale, a number of physical and chemical processes will take part in the geological repository. For the assessment of radionuclide migration from a geological repository, it is necessary to predict the repository's behavior once placed in the host rock as well as the host-rock response to disturbances due to construction. In this study, the analysis of repository barriers (backfill, concrete, inner excavation disturbed zone (EDZ), outer EDZ, host rock) thermo–hydraulic–mechanical (THM) evolution was performed, and the scope of gas-induced desaturation was analyzed with COMSOL Multiphysics. The analysis was based on modelling of a two-phase flow of miscible fluid (water and H2) considering important phenomena such as gas dissolution and diffusion, advective–diffusive transport in the gaseous phase, and mechanical deformations due to thermal expansion of water and porous media. The importance of proper consideration of temperature-dependent thermodynamic properties of water and THM couplings in the analysis of near-field processes was also discussed. The modelling demonstrated that such activities as 50 years' ventilation of the waste disposal tunnel in initially saturated porous media, and such processes as gas generation due to corrosion of waste package or heat load from the waste, also led to desaturation of barriers. H2 gas generation led to the desaturation in engineered barriers and in a part of the EDZ close to the gas generation place vanishing soon after finish of gas generation, while the host rock remained saturated during the gas generation phase (50–100,000 years). Radionuclide transport properties in porous media such as effective diffusivity are highly dependent on the water content in the barriers determined by their porosity and saturation. [ABSTRACT FROM AUTHOR]

Heat load from high-level radioactive waste (HLW) packages will result in elevated temperatures around the disposal tunnel. Differences in thermal expansion between rock and water will induce the redistribution of stresses. The assessment of the thermo-hydromechanical (THM) regime is necessary to evaluate the potential for fracture development. For this purpose, it is important to evaluate the nature and extent of induced strains, and their impact on rock permeability, which, subsequently, is important for radionuclide transport. This paper presents the modeling activities of the Lithuanian Energy Institute performed in the framework of the European joint program EURAD and the analysis of the influence of temperature on clay-based material behavior. Within this study, different stress conditions and material properties (isotropic, anisotropic) were analyzed with a thermo-poroelastic material model for the Callovo-Oxfordian clay host rock in the 100 m × 100 m domain. The heat load on the clay rock comes from a tunnel with a radius of 1.25 m. The overall THM response of the clay host rock system to the heat load is performed with the COMSOL Multiphysics (Burlington, MA, USA) software. The THM response near the HLW disposal tunnel was analyzed in terms of temperature, pore pressure, displacements, and stresses, and the results are presented in this work. Besides the impact of anisotropy, the effect of hydraulic conditions at the tunnel boundary was also analyzed. The modeling results revealed that anisotropy in stress and properties had an impact on the hydro-mechanical response of the material even during excavation and waiting phases. The analysis also showed that the water drainage condition on the tunnel boundary had no effect on the thermal state around the tunnel, but it had a significant impact on the hydro-mechanical response. [ABSTRACT FROM AUTHOR]