Search

This study examined the possibility of using various types of waste paper—used newsprint (NP), used lightweight coated paper (LWC), used office paper (OP), and used corrugated cardboard (CC)—for the removal of anionic dyes, Acid Red 18 (AR18) and Acid Yellow 23 (AY23), and cationic dyes, Basic Violet 10 (BV10) and Basic Red 46 (BR46), from aqueous solutions. The scope of this research included the characterization of sorbents (FTIR, SEM, BET surface area, porosity, pHPZC, effectiveness of water coloration), determination of pH effect on the effectiveness of dye sorption, sorption kinetics (pseudo-first-order model, second-order model, intraparticular diffusion model), and the maximum sorption capacity (Langmuir models and Freundlich model) of the tested sorbents. The use of waste paper materials as sorbents was found to not pose any severe risk of aquatic environment contamination. AR18, AY23, and BV10 sorption intensities were the highest at pH 2, and that of RB46 at pH 6. The waste paper sorbents proved particularly effective in removing cationic dyes, like in the case of, e.g., NP, which had a sorption capacity that reached 38.87 mg/g and 90.82 mg/g towards BV10 and BR46, respectively, and were comparable with that of selected activated carbons (literature data). [ABSTRACT FROM AUTHOR]

In the field of book heritage, it is important to develop cleaning/disinfecting treatments that can slow down the degradation of paper to prevent evident and irreversible damage. The objectives of the cleaning treatments are to remove external contaminants and oxidation and decomposition products of the paper, but these processes must not modify the unique characteristics of the book heritage resulting in irreversible changes in the structure of the paper. Recently, several innovative cleaning treatments were developed with the aim of being minimally invasive; however, to assess the effect of these treatments on paper, it is necessary to use a diagnostic non-destructive, rapid, and affordable process. In previous work, we used surface scanning Raman spectroscopy to develop a diagnostic protocol able to follow the aging processes of the paper, discriminating between hydrolysis and oxidation. In this paper, we applied this protocol to study the action of different types of treatments (hydrogel and EUV irradiation), evaluating both their effectiveness and impact on paper parameters. The results reported here demonstrate that the developed in operando diagnostic procedure can follow the changes in the paper structure comparing them to the variability due to the intrinsic inhomogeneity of paper, without sample contact in a rapid and effective way. [ABSTRACT FROM AUTHOR]

Although membrane separation technology has been widely used in the treatment of oily wastewater, the complexity and high cost of the membrane preparation, as well as its poor stability, limit its further development. In this study, via the vacuum-assisted suction filtration method, polydopamine (PDA)-coated TiO2 nanoparticles were tightly attached and embedded on both sides of laboratory filter paper (FP). The resultant FP possessed the typical wettability of high hydrophilicity in the air with the water contact angle (WCA) of 28°, superoleophilicity with the oil contact angle (OCA) close to 0°, underwater superoleophobicity with the underwater OCA greater than 150°, and superhydrophobicity under the water with the underoil WCA over 150° for five kinds of organic solvents (carbon tetrachloride, toluene, n-hexane, n-octane, and iso-octane). The separation efficiency of immiscible oil/water, oil-in-water, and water-in-oil emulsions using the modified FP is higher than 99%. After 17 cycles of emulsion separation, a high separation efficiency of 99% was still maintained for the FP, along with good chemical and mechanical stability. In addition, successful separation and purification were also realized for the oil-in-water emulsion that contained the methylene blue (MB) dye, along with the complete degradation of MB in an aqueous solution under UV irradiation. [ABSTRACT FROM AUTHOR]

Waste wood, which has a large amount of cellulose fibers, should be transformed into useful materials for addressing environmental and resource problems. Thus, this study analyzed the application of waste wood as supercapacitor electrode material. First, cellulose fibers were extracted from waste wood and mixed with different contents of graphene nanoplatelets (GnPs) in water. Using a facile filtration method, cellulose papers with GnPs were prepared and converted into carbon papers through carbonization and then to porous activated carbon papers containing GnPs (ACP−GnP) through chemical activation processes. For the morphology of ACP−GnP, activated carbon fibers with abundant pores were formed. The increase in the amount of GnPs attached to the fiber surfaces decreased the number of pores. The Brunauer–Emmett–Teller surface areas and specific capacitance of the ACP−GnP electrodes decreased with an increase in the GnP content. However, the galvanostatic charge–discharge curves of ACPs with higher GnP contents gradually changed into triangular and linear shapes, which are associated with the capacitive performance. For example, ACP with 15 wt% GnP had a low mass transfer resistance and high charge delivery of ions, resulting in the specific capacitance value of 267 Fg−1 owing to micropore and mesopore formation during the activation of carbon paper. [ABSTRACT FROM AUTHOR]

This study examined the possibility of using various types of waste paper—used newsprint (NP), used lightweight coated paper (LWC), used office paper (OP), and used corrugated cardboard (CC)—for the removal of anionic dyes, Acid Red 18 (AR18) and Acid Yellow 23 (AY23), and cationic dyes, Basic Violet 10 (BV10) and Basic Red 46 (BR46), from aqueous solutions. The scope of this research included the characterization of sorbents (FTIR, SEM, BET surface area, porosity, pHPZC, effectiveness of water coloration), determination of pH effect on the effectiveness of dye sorption, sorption kinetics (pseudo-first-order model, second-order model, intraparticular diffusion model), and the maximum sorption capacity (Langmuir models and Freundlich model) of the tested sorbents. The use of waste paper materials as sorbents was found to not pose any severe risk of aquatic environment contamination. AR18, AY23, and BV10 sorption intensities were the highest at pH 2, and that of RB46 at pH 6. The waste paper sorbents proved particularly effective in removing cationic dyes, like in the case of, e.g., NP, which had a sorption capacity that reached 38.87 mg/g and 90.82 mg/g towards BV10 and BR46, respectively, and were comparable with that of selected activated carbons (literature data).

Herein, a new, direct paper-based fluorimetric method is described for the quantitative determination of glutathione (GSH) molecules in nutritional supplements. Briefly, the proposed analytical method is based on the fluorescence emission resulting from the direct and selective chemical reaction of GSH molecules with the derivatization reagent that is o-phthalaldehyde (OPA) in acidic conditions at room temperature. The intensity of the emitted fluorescence on the surface of the analytical paper devices after irradiation with a lamp at 365 nm is proportional to the concentration of GSH and is measured using a smartphone as the detector. This methodology, which is suitable for measurements in laboratories with limited resources, does not require specialized instrumentation or trained personnel. The protocol governing the proposed method is simple and easily applicable. Essentially, the chemical analyst should adjust the value of pH on the surface of the paper by adding a minimal amount of buffer solution; then, after adding a few microliters of the derivatization reagent, wait for the surface of the paper to dry and, finally, add the analyte. Subsequently, the irradiation of the sensor and the measurement of the emitted fluorescence can be recorded with a mobile phone. In the present study, several parameters affecting the chemical reaction and the emitted fluorescence were optimized, the effect of interfering compounds that may be present in dietary supplements was examined, and the stability of these paper sensors under different storage conditions was evaluated. Additionally, the chemical stability of these paper devices in various maintenance conditions was studied, with satisfactory results. The detection limit calculated as 3.3 S/N was 20.5 μmol L−1, while the precision of the method was satisfactory, ranging from 3.1% (intra-day) to 7.3% (inter-day). Finally, the method was successfully applied to three different samples of dietary supplements.

Sulfite, a widely used food additive, is subject to regulated labeling. The extraction of sulfite as the stable hydroxymethylsulfonate (HMS) form and its quantitative analysis by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been recognized for their good sensitivity, selectivity, and versatility across various food materials. This study aimed to develop a cost-effective and simpler method for sulfite quantitation, while maintaining the superior sensitivity and selectivity of mass spectrometry (MS). To achieve this, we introduced paper spray ionization (PSI), an ambient desorption ionization technique that could achieve the direct measurement of analytes without employing separation. We also employed a novel internal standard (IS) structurally similar to the analyte, replacing the more expensive isotopically labeled IS. Although the PSI-MS/MS method developed in this study exhibited slightly lower analytical performance compared to the conventional LC-MS/MS, it remained effective for sulfite analysis in dried fruits.

Hg2+ is one of the most dangerous pollutants that can cause damage to organs and the immune system. The common detection methods of Hg2+ require sophisticated instrumentation and a long time for analysis. The purpose of this study was to develop a sensor for the detection of Hg2+ using filter paper immobilized by gold nanoparticles (AuNPs) conjugated with cyanuric acid (CA). The clear color change from pink to bluish purple is the response of the CA-AuNPs filter paper sensor to exposure to Hg2+. Detection can be observed visually with the naked eye and/or with imageJ software; the detection limit is 0.05 µM. The colorimetric response of the sensor was also selective towards Hg2+ after testing with different metal ions. In addition, the response from the sensor was also consistent for lake water samples spiked with Hg2+. The results of this research provide a promising basic technology for the development of sensors that are affordable, fast, portable, and easy to use for the detection and monitoring of Hg2+ levels in water. [ABSTRACT FROM AUTHOR]

Tetraethoxysilane (TEOS) is the most commonly used silicon-based reinforcement agent for conserving art relics due to its cost-effectiveness and commercial maturity. However, the resulting silica gel phase is prone to developing cracks as the gel shrinks during the sol–gel process, potentially causing severe damage to the objects being treated. In this study, dodecyltrimethoxysilane (DTMS) was introduced into TEOS to minimize this shrinkage by adding elastic long chains to weaken the capillary forces. The gel formed from the DTMS/TEOS hybrid material was transparent and crack-free, featuring a dense microstructure without mesopores or micropores. It exhibited excellent thermal stability, with a glass transition temperature of up to 109.64 °C. Evaluation experiments were conducted on artificially aged, handmade bamboo paper. The TEOS-based hybrid material effectively combined with the paper fibers through the sol–gel process, polymerizing into a network structure that enveloped the paper surface or penetrated between the fibers. The surface of the treated paper displayed excellent hydrophobic properties, with no significant changes in appearance, color, or air permeability. The mechanical properties of the treated bamboo paper improved significantly, with longitudinal and transverse tensile strengths increasing by up to 36.63% and 44.25%, respectively. These research findings demonstrate the promising potential for the application of DTMS/TEOS hybrid materials in reinforcing paper relics.

Fluorescent sensors with single reading are generally subject to unpredictable disturbs from environmental and artificial factors. In order to overcome this barrier of detection reliability, a paper-based optical sensor with proportional fluorescence was established and further combined with a smartphone for visual, on-site and quantitative detection of Fe3+, which affects the color, smell and taste of water, and endangers the health of plants and animals. The ratio fluorescent probe was fabricated by rhodamine B and carbon quantum dots derived from xylan. The red fluorescence of rhodamine B was inert to Fe3+, which was referred to as background. And blue emitting carbon quantum dots functioned as signal report units, which would be quenched by Fe3+ and make the fluorescence of the ratio probe change from purple to red. The quantitative detection of Fe3+ was conducted by investigating the RGB value of fluorescent images with a smartphone. With the increase of Fe3+ concentration, the R/B (red/blue) value of the fluorescent paper gradually increased. The linear detection range was 10–180 μM, and the limit of detection was 198.2 nM. The application of ratio fluorescent paper with a smartphone provides a facile method for the rapid detection of ions.

Lumpy Skin Disease (LSD) is a notifiable viral disease caused by Lumpy Skin Disease virus (LSDV). It is usually associated with high economic losses, including a loss of productivity, infertility, and death. LSDV shares genetic and antigenic similarities with Sheep pox virus (SPV) and Goat pox (GPV) virus. Hence, the LSDV traditional diagnostic tools faced many limitations regarding sensitivity, specificity, and cross-reactivity. Herein, we fabricated a paper-based turn-on fluorescent Molecularly Imprinted Polymer (MIP) sensor for the rapid detection of LSDV. The LSDV-MIPs sensor showed strong fluorescent intensity signal enhancement in response to the presence of the virus within minutes. Our sensor showed a limit of detection of 101 log10 TCID50/mL. Moreover, it showed significantly higher specificity to LSDV relative to other viruses, especially SPV. To our knowledge, this is the first record of a paper-based rapid detection test for LSDV depending on fluorescent turn-on behavior.

Improving the shelf lives of fruits is challenging. The biodegradable polysaccharide pullulan exhibits excellent film-forming ability, gas barrier performance, and natural decomposability, making it an optimal material for fruit preservation. To overcome problems of high cost and film porosity of existing packaging technologies, we aimed to develop pullulan-based packaging paper to enhance the shelf lives of fruits. A thin paper coating comprising a mixture of 15 wt.% pullulan solution at various standard viscosities (75.6, 77.8, and 108.5 mPa·s) with tea polyphenols (15:2) and/or vitamin C (150:1) improved the oxygen transmission rate (120–160 cm3 m−2·24 h·0.1 MPa), water vapor transmission rate (−1 m−2·h·kPa), maximum free radical clearance rate (>87%), and antibacterial properties of base packaging paper. Grapes wrapped with these pullulan-based papers exhibited less weight loss (>4.41%) and improved hardness (>16.4%) after 10 days of storage compared to those of control grapes (wrapped in untreated/base paper). Grapes wrapped with pullulan-based paper had >12.6 wt.% total soluble solids, >1.5 mg/g soluble protein, >0.44 wt.% titratable acidity, and ≥4.5 mg 100 g−1 ascorbic acid. Thus, pullulan-based paper may prolong the shelf life of grapes with operational convenience, offering immense value for fruit preservation.

This research explores the potential of ionic liquids (ILs) in restoring paper artifacts, particularly an aged book sample. Three distinct ILs—1-ethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, 1-methyl-3-pentylimidazolium bis(trifluoromethylsulfonyl)imide, and 1-methyl-3-heptylimidazolium bis(trifluoromethylsulfonyl)imide —both in their pure form and isopropanol mixtures, were examined for their specific consumption in conjunction with paper, with 1-ethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide displaying the highest absorption. Notably, the methyl-3-heptylimidazolium ionic liquid displayed pronounced deacidification capabilities, elevating the paper pH close to a neutral 7. The treated paper exhibited significant color enhancements, particularly with 1-heptyl-3-methylimidazolium and 1-pentyl-3-methylimidazolium ILs, as evidenced by CIE-Lab* parameters. An exploration of ILs as potential UV stabilizers for paper unveiled promising outcomes, with 1-heptyl-3-methylimidazolium IL demonstrating minimal yellowing post-UV irradiation. FTIR spectra elucidated structural alterations, underscoring the efficacy of ILs in removing small-molecular additives and macromolecules. The study also addressed the preservation of inked artifacts during cleaning, showcasing ILs’ ability to solubilize iron gall ink, particularly the one with the 1-ethyl-3-propylimidazolium cation. While exercising caution for prolonged use on inked supports is still recommended, ILs are shown here to be valuable for cleaning ink-stained surfaces, establishing their effectiveness in paper restoration and cultural heritage preservation.

This research explores the potential of ionic liquids (ILs) in restoring paper artifacts, particularly an aged book sample. Three distinct ILs—1-ethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, 1-methyl-3-pentylimidazolium bis(trifluoromethylsulfonyl)imide, and 1-methyl-3-heptylimidazolium bis(trifluoromethylsulfonyl)imide —both in their pure form and isopropanol mixtures, were examined for their specific consumption in conjunction with paper, with 1-ethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide displaying the highest absorption. Notably, the methyl-3-heptylimidazolium ionic liquid displayed pronounced deacidification capabilities, elevating the paper pH close to a neutral 7. The treated paper exhibited significant color enhancements, particularly with 1-heptyl-3-methylimidazolium and 1-pentyl-3-methylimidazolium ILs, as evidenced by CIE-Lab* parameters. An exploration of ILs as potential UV stabilizers for paper unveiled promising outcomes, with 1-heptyl-3-methylimidazolium IL demonstrating minimal yellowing post-UV irradiation. FTIR spectra elucidated structural alterations, underscoring the efficacy of ILs in removing small-molecular additives and macromolecules. The study also addressed the preservation of inked artifacts during cleaning, showcasing ILs' ability to solubilize iron gall ink, particularly the one with the 1-ethyl-3-propylimidazolium cation. While exercising caution for prolonged use on inked supports is still recommended, ILs are shown here to be valuable for cleaning ink-stained surfaces, establishing their effectiveness in paper restoration and cultural heritage preservation. [ABSTRACT FROM AUTHOR]

As a kind of biomass resource, waste office paper can be used as a carbon precursor to prepare carbon materials. In this work, carbon microspheres with regular shape, uniform particle size and high carbon content were successfully prepared from waste office paper via a hydrothermal synthesis method with sulfuric acid as the catalyst. The effects of reaction temperature and sulfuric acid dosage on the morphology of the carbon microspheres were studied. The formation mechanism of the carbon microspheres was investigated by analyzing the structure and composition of the products. The results show that the hydrolysis of cellulose in waste paper under hydrothermal conditions was the key for the formation of carbon microspheres. The temperature of hydrothermal reaction and the use of sulfuric acid can affect the morphology of carbon microspheres. The carbon microspheres synthesized at 210 °C with 10 mL sulfuric acid have the best surface morphology, with uniform particle size and higher dispersion. Cyclic voltammetry and electrochemical impedance spectroscopy show that the carbon microspheres have good capacitance performance and can be used in capacitors. This study provides a low-cost precursor for carbon microspheres as well as a new method for the recycle of waste paper. [ABSTRACT FROM AUTHOR]

Tetraethoxysilane (TEOS) is the most commonly used silicon-based reinforcement agent for conserving art relics due to its cost-effectiveness and commercial maturity. However, the resulting silica gel phase is prone to developing cracks as the gel shrinks during the sol–gel process, potentially causing severe damage to the objects being treated. In this study, dodecyltrimethoxysilane (DTMS) was introduced into TEOS to minimize this shrinkage by adding elastic long chains to weaken the capillary forces. The gel formed from the DTMS/TEOS hybrid material was transparent and crack-free, featuring a dense microstructure without mesopores or micropores. It exhibited excellent thermal stability, with a glass transition temperature of up to 109.64 °C. Evaluation experiments were conducted on artificially aged, handmade bamboo paper. The TEOS-based hybrid material effectively combined with the paper fibers through the sol–gel process, polymerizing into a network structure that enveloped the paper surface or penetrated between the fibers. The surface of the treated paper displayed excellent hydrophobic properties, with no significant changes in appearance, color, or air permeability. The mechanical properties of the treated bamboo paper improved significantly, with longitudinal and transverse tensile strengths increasing by up to 36.63% and 44.25%, respectively. These research findings demonstrate the promising potential for the application of DTMS/TEOS hybrid materials in reinforcing paper relics. [ABSTRACT FROM AUTHOR]

In the field of book heritage, it is important to develop cleaning/disinfecting treatments that can slow down the degradation of paper to prevent evident and irreversible damage. The objectives of the cleaning treatments are to remove external contaminants and oxidation and decomposition products of the paper, but these processes must not modify the unique characteristics of the book heritage resulting in irreversible changes in the structure of the paper. Recently, several innovative cleaning treatments were developed with the aim of being minimally invasive; however, to assess the effect of these treatments on paper, it is necessary to use a diagnostic non-destructive, rapid, and affordable process. In previous work, we used surface scanning Raman spectroscopy to develop a diagnostic protocol able to follow the aging processes of the paper, discriminating between hydrolysis and oxidation. In this paper, we applied this protocol to study the action of different types of treatments (hydrogel and EUV irradiation), evaluating both their effectiveness and impact on paper parameters. The results reported here demonstrate that the developed in operando diagnostic procedure can follow the changes in the paper structure comparing them to the variability due to the intrinsic inhomogeneity of paper, without sample contact in a rapid and effective way.

Waste wood, which has a large amount of cellulose fibers, should be transformed into useful materials for addressing environmental and resource problems. Thus, this study analyzed the application of waste wood as supercapacitor electrode material. First, cellulose fibers were extracted from waste wood and mixed with different contents of graphene nanoplatelets (GnPs) in water. Using a facile filtration method, cellulose papers with GnPs were prepared and converted into carbon papers through carbonization and then to porous activated carbon papers containing GnPs (ACP−GnP) through chemical activation processes. For the morphology of ACP−GnP, activated carbon fibers with abundant pores were formed. The increase in the amount of GnPs attached to the fiber surfaces decreased the number of pores. The Brunauer–Emmett–Teller surface areas and specific capacitance of the ACP−GnP electrodes decreased with an increase in the GnP content. However, the galvanostatic charge–discharge curves of ACPs with higher GnP contents gradually changed into triangular and linear shapes, which are associated with the capacitive performance. For example, ACP with 15 wt% GnP had a low mass transfer resistance and high charge delivery of ions, resulting in the specific capacitance value of 267 Fg−1 owing to micropore and mesopore formation during the activation of carbon paper.

Invaluable paper relics that embody a rich traditional culture have suffered damage, requiring urgent restoration. In this context, the utilization of soymilk as a sizing agent holds great significance and reverence. This study investigates the use of soymilk as a sizing agent for Xuan paper and evaluates its effects on various properties and the long-term behavior of the paper. The findings reveal that the application of soymilk as a sizing agent for Xuan paper imparts distinct properties, including hydrophobicity, improved mechanical properties, and unique chromaticity. These characteristics—arising from the papillae on the surface of the Xuan paper, the protein folding of the soy protein, and hydrogen-bonding interactions between the soy protein and paper fibers—play a crucial role in shaping the paper's unique attributes. From a physicochemical perspective, the aging process leads to multiple changes in paper properties. These changes include acidification, which refers to a decrease in pH, as well as a decline in mechanical strength, an increase in chromaticity, and a decrease in the degree of polymerization (DP) of the paper. The Ekenstam equation is employed to predict the lifespan of the paper, showing longer lifespans for Sheng Xuan paper and a negative correlation between soymilk concentration and lifespan in soymilk-sized paper. Our work provides valuable insights for the preservation and maintenance of paper, highlighting the potential benefits and challenges of using soymilk for surface sizing. [ABSTRACT FROM AUTHOR]

Paper spray ionization mass spectrometry (PSI MS) has emerged as a notable method for the rapid analysis of biological samples. However, the typical cellulose-based paper tip is incompatible with protein detection due to the strong interaction between cellulose hydroxyl groups and proteins. In this study, we utilized a commercially available polyolefin-based synthetic paper, Teslin®, as an alternative PSI substrate for simple protein analysis. We have named this method “droplet PSI” MS, as the aqueous protein solution droplet retains its shape on the Teslin® paper tip. For droplet PSI, no further chemical pretreatment was necessary for the Teslin® substrate; the only required preparation was shaping the Teslin® paper into a triangular tip. In droplet PSI MS, protein ion signals were instantly detected from a protein solution droplet upon applying a spray solvent in situ along with high voltage (HV). When compared with conventional PSI MS, our method demonstrated superior sensitivity. The droplet PSI MS utilizing Teslin® also showcased flexibility in real-time observation of protein alterations induced by an acid additive. Additionally, the effects of spray solvent composition and the application method were discussed.

Although membrane separation technology has been widely used in the treatment of oily wastewater, the complexity and high cost of the membrane preparation, as well as its poor stability, limit its further development. In this study, via the vacuum-assisted suction filtration method, polydopamine (PDA)-coated TiO2 nanoparticles were tightly attached and embedded on both sides of laboratory filter paper (FP). The resultant FP possessed the typical wettability of high hydrophilicity in the air with the water contact angle (WCA) of 28°, superoleophilicity with the oil contact angle (OCA) close to 0°, underwater superoleophobicity with the underwater OCA greater than 150°, and superhydrophobicity under the water with the underoil WCA over 150° for five kinds of organic solvents (carbon tetrachloride, toluene, n-hexane, n-octane, and iso-octane). The separation efficiency of immiscible oil/water, oil-in-water, and water-in-oil emulsions using the modified FP is higher than 99%. After 17 cycles of emulsion separation, a high separation efficiency of 99% was still maintained for the FP, along with good chemical and mechanical stability. In addition, successful separation and purification were also realized for the oil-in-water emulsion that contained the methylene blue (MB) dye, along with the complete degradation of MB in an aqueous solution under UV irradiation.

Converting paper-grade bleached Kraft pulp into dissolving pulp using eco-friendly chemicals on-site at the mill is a challenge for the pulp industry. In this study, two oxidation systems are evaluated: the first one is based on the use of hydrogen peroxide at various levels of alkalinity; the second one investigates the use of sodium periodate followed by hydrogen peroxide to convert aldehydes into carboxyls and enhance their hemicelluloses removal. Our results have shown that when using only peroxide, the removal of hemicelluloses was not sufficient to improve the pulp’s dissolving ability. Conversely, the periodate–peroxide system proved to be more efficient. Results regarding the pulp purity, solubility, degradation (pulp viscosity and cellulose molecular mass distribution), brightness, and its potential applications were discussed.

Improving the shelf lives of fruits is challenging. The biodegradable polysaccharide pullulan exhibits excellent film-forming ability, gas barrier performance, and natural decomposability, making it an optimal material for fruit preservation. To overcome problems of high cost and film porosity of existing packaging technologies, we aimed to develop pullulan-based packaging paper to enhance the shelf lives of fruits. A thin paper coating comprising a mixture of 15 wt.% pullulan solution at various standard viscosities (75.6, 77.8, and 108.5 mPa·s) with tea polyphenols (15:2) and/or vitamin C (150:1) improved the oxygen transmission rate (120–160 cm3 m−2·24 h·0.1 MPa), water vapor transmission rate (<5.44 g·mm−1 m−2·h·kPa), maximum free radical clearance rate (>87%), and antibacterial properties of base packaging paper. Grapes wrapped with these pullulan-based papers exhibited less weight loss (>4.41%) and improved hardness (>16.4%) after 10 days of storage compared to those of control grapes (wrapped in untreated/base paper). Grapes wrapped with pullulan-based paper had >12.6 wt.% total soluble solids, >1.5 mg/g soluble protein, >0.44 wt.% titratable acidity, and ≥4.5 mg 100 g−1 ascorbic acid. Thus, pullulan-based paper may prolong the shelf life of grapes with operational convenience, offering immense value for fruit preservation. [ABSTRACT FROM AUTHOR]

Kozo paper, usu-mino-gami, is frequently used as the first back lining paper of hanging scrolls in order to support the main paper with a painting or a work of calligraphy on it. To dye it an appropriate color, paper is often treated with an alkali mordant solution. However, current kozo paper products have received such comments from conservators that wet tensile strength is weak and hard to handle. Therefore, improving the wet tensile strength of kozo paper is required. In previous papers, the effect of the sheet forming method, cooking condition, and parenchyma cell content between fibers on the wet tensile strength of kozo paper has been investigated. In this paper, the effect of glucuronoxylan, the main component of hardwood hemicellulose on the wet tensile strength of kozo paper was investigated. The wet tensile strength of kozo paper, when made in different cooking conditions, was evaluated using the Finch device. Glucuronoxylan content in fiber was analyzed using GC-FID. According to the results, it has been proved that glucuronoxylan content (with a xylan to glucan molar ratio of 4.43% to 5.16%) itself contributes to the wet tensile strength of the kozo sheet. Therefore, to increase the wet tensile strength of kozo paper, it is recommended to cook under milder conditions, thus retaining a higher amount of glucuronoxylan in the pulp. [ABSTRACT FROM AUTHOR]

We developed an integrated gas diffusion layer (GDL) for proton exchange membrane (PEM) fuel cells by growing carbon nanofibers (CNFs) in situ on carbon paper via the electro-polymerization of polyaniline (PANI) on carbon paper followed by a subsequent carbonization treatment process. The CNF/carbon paper showed a microporous structure and a significantly increased pore volume compared to commercial carbon paper. By utilizing this CNF/carbon paper in a PEM fuel cell, it was found that the cell with CNF/carbon paper had superior performance compared to the commercial GDL at both high and low humidity conditions, and its power density was as high as 1.21 W cm−2 at 100% relative humidity, which is 26% higher than that of a conventional gas diffusion layer (0.9 W cm−2). The significant performance enhancement was attributed to a higher pore volume and porosity of the CNF/carbon paper, which improved gas diffusion in the GDL. In addition, the superior performance of the cell with CNF/carbon paper at low relative humidity demonstrated that it had better water retention than the commercial GDL. This study provides a novel and facile method for the surface modification of GDLs to improve the performance of PEM fuel cells. The CNF/carbon paper with a microporous structure has suitable hydrophobicity and lower through-plane resistance, which makes it promising as an advanced substrate for GDLs in fuel cell applications. [ABSTRACT FROM AUTHOR]

Herein, a new, direct paper-based fluorimetric method is described for the quantitative determination of glutathione (GSH) molecules in nutritional supplements. Briefly, the proposed analytical method is based on the fluorescence emission resulting from the direct and selective chemical reaction of GSH molecules with the derivatization reagent that is o-phthalaldehyde (OPA) in acidic conditions at room temperature. The intensity of the emitted fluorescence on the surface of the analytical paper devices after irradiation with a lamp at 365 nm is proportional to the concentration of GSH and is measured using a smartphone as the detector. This methodology, which is suitable for measurements in laboratories with limited resources, does not require specialized instrumentation or trained personnel. The protocol governing the proposed method is simple and easily applicable. Essentially, the chemical analyst should adjust the value of pH on the surface of the paper by adding a minimal amount of buffer solution; then, after adding a few microliters of the derivatization reagent, wait for the surface of the paper to dry and, finally, add the analyte. Subsequently, the irradiation of the sensor and the measurement of the emitted fluorescence can be recorded with a mobile phone. In the present study, several parameters affecting the chemical reaction and the emitted fluorescence were optimized, the effect of interfering compounds that may be present in dietary supplements was examined, and the stability of these paper sensors under different storage conditions was evaluated. Additionally, the chemical stability of these paper devices in various maintenance conditions was studied, with satisfactory results. The detection limit calculated as 3.3 S/N was 20.5 μmol L−1, while the precision of the method was satisfactory, ranging from 3.1% (intra-day) to 7.3% (inter-day). Finally, the method was successfully applied to three different samples of dietary supplements. [ABSTRACT FROM AUTHOR]

Sulfite, a widely used food additive, is subject to regulated labeling. The extraction of sulfite as the stable hydroxymethylsulfonate (HMS) form and its quantitative analysis by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been recognized for their good sensitivity, selectivity, and versatility across various food materials. This study aimed to develop a cost-effective and simpler method for sulfite quantitation, while maintaining the superior sensitivity and selectivity of mass spectrometry (MS). To achieve this, we introduced paper spray ionization (PSI), an ambient desorption ionization technique that could achieve the direct measurement of analytes without employing separation. We also employed a novel internal standard (IS) structurally similar to the analyte, replacing the more expensive isotopically labeled IS. Although the PSI-MS/MS method developed in this study exhibited slightly lower analytical performance compared to the conventional LC-MS/MS, it remained effective for sulfite analysis in dried fruits. [ABSTRACT FROM AUTHOR]

In 2014, a new type of the fire-resistant paper based on ultralong hydroxyapatite (HAP) nanowires was reported by the author's research group, which had superior properties and promising applications in various fields, such as high-temperature resistance, fire retardance, heat insulation, electrical insulation, energy, environmental protection, and biomedicine. The wet end chemical properties of the fire-resistant paper pulp are very important for papermaking and mechanical performance of the paper, which play a guiding role in the practical production of the fire-resistant paper. In this paper, the wet end chemical properties of a new kind of fire-resistant paper pulp based on ultralong HAP nanowires are studied for the first time by focusing on the wet end chemical parameters, the effects of these parameters on the properties such as flocculation, retention, draining, and white water circulation of the fire-resistant paper pulp, and their effects on the properties of the as-prepared fire-resistant paper. The experimental results indicated that the wet end chemical properties of the new kind of fire-resistant paper pulp based on ultralong HAP nanowires were unique and entirely different from those of the traditional paper pulp based on plant fibers. The wet end chemical properties of the fire-resistant paper pulp were significantly influenced by the inorganic adhesive and its content, which affected the runnability of the paper machine and the properties of the as-prepared fire-resistant paper. The flocculation properties of the fire-resistant paper pulp based on ultralong HAP nanowires were affected by the conductivity and Zeta potential. The addition of the inorganic adhesive in the fire-resistant paper pulp based on ultralong HAP nanowires could significantly increase the conductivity of the fire-resistant paper pulp, reduce the particle size of paper pulp floccules, and increase the tensile strength of the fire-resistant paper. In addition, the fire-resistant paper pulp based on ultralong HAP nanowires in the presence of inorganic adhesive exhibited excellent antibacterial performance. This work will contribute to and accelerate the commercialization process and applications of the new type of the fire-resistant paper based on ultralong HAP nanowires. [ABSTRACT FROM AUTHOR]

Kozo paper, usu-mino-gami, is frequently used as the first back lining paper of hanging scrolls in order to support the main paper with a painting or a work of calligraphy on it. To dye it an appropriate color, paper is often treated with an alkali mordant solution. However, current kozo paper products have received such comments from conservators that wet tensile strength is weak and hard to handle. Therefore, improving the wet tensile strength of kozo paper is required. In previous papers, the effect of the sheet forming method, cooking condition, and parenchyma cell content between fibers on the wet tensile strength of kozo paper has been investigated. In this paper, the effect of glucuronoxylan, the main component of hardwood hemicellulose on the wet tensile strength of kozo paper was investigated. The wet tensile strength of kozo paper, when made in different cooking conditions, was evaluated using the Finch device. Glucuronoxylan content in fiber was analyzed using GC-FID. According to the results, it has been proved that glucuronoxylan content (with a xylan to glucan molar ratio of 4.43% to 5.16%) itself contributes to the wet tensile strength of the kozo sheet. Therefore, to increase the wet tensile strength of kozo paper, it is recommended to cook under milder conditions, thus retaining a higher amount of glucuronoxylan in the pulp.

Invaluable paper relics that embody a rich traditional culture have suffered damage, requiring urgent restoration. In this context, the utilization of soymilk as a sizing agent holds great significance and reverence. This study investigates the use of soymilk as a sizing agent for Xuan paper and evaluates its effects on various properties and the long-term behavior of the paper. The findings reveal that the application of soymilk as a sizing agent for Xuan paper imparts distinct properties, including hydrophobicity, improved mechanical properties, and unique chromaticity. These characteristics—arising from the papillae on the surface of the Xuan paper, the protein folding of the soy protein, and hydrogen-bonding interactions between the soy protein and paper fibers—play a crucial role in shaping the paper’s unique attributes. From a physicochemical perspective, the aging process leads to multiple changes in paper properties. These changes include acidification, which refers to a decrease in pH, as well as a decline in mechanical strength, an increase in chromaticity, and a decrease in the degree of polymerization (DP) of the paper. The Ekenstam equation is employed to predict the lifespan of the paper, showing longer lifespans for Sheng Xuan paper and a negative correlation between soymilk concentration and lifespan in soymilk-sized paper. Our work provides valuable insights for the preservation and maintenance of paper, highlighting the potential benefits and challenges of using soymilk for surface sizing.

Complexes of lanthanide ions, such as Eu(III) (red light emission) and Tb(III) (green light emission), with proper ligands can be highly luminescent and color-tunable, also attaining yellow and orange emission under UV radiation. The ligands employed in this work were poly(sodium acrylate), working as polymeric matrix, and 1,10-phenanthroline, taking advantage of its antenna effect. Possibilities of color display were further enhanced by incorporating a cationic polyfluorene with blue emission. This strategy allowed for obtaining cyan and magenta, besides the aforementioned colors. Uncoated cellulose paper was impregnated with the resulting luminescent inks, observing a strong hypsochromic shift in excitation wavelength upon drying. Hence, while a cheap UV-A lamp sufficed to reveal the polyfluorene’s blue emission, shorter wavelengths were necessary to visualize the emission due to lanthanide ions as well. The capacity to reveal, with UV-C radiation, a full-color image that remains invisible under natural light is undoubtedly useful for anti-counterfeiting applications. Furthermore, both lanthanide ion complexes and polyfluorenes were shown to have their luminescence quenched by Cu(II) ions and nitroarenes, respectively.

Fluorescent sensors with single reading are generally subject to unpredictable disturbs from environmental and artificial factors. In order to overcome this barrier of detection reliability, a paper-based optical sensor with proportional fluorescence was established and further combined with a smartphone for visual, on-site and quantitative detection of Fe3+, which affects the color, smell and taste of water, and endangers the health of plants and animals. The ratio fluorescent probe was fabricated by rhodamine B and carbon quantum dots derived from xylan. The red fluorescence of rhodamine B was inert to Fe3+, which was referred to as background. And blue emitting carbon quantum dots functioned as signal report units, which would be quenched by Fe3+ and make the fluorescence of the ratio probe change from purple to red. The quantitative detection of Fe3+ was conducted by investigating the RGB value of fluorescent images with a smartphone. With the increase of Fe3+ concentration, the R/B (red/blue) value of the fluorescent paper gradually increased. The linear detection range was 10–180 μM, and the limit of detection was 198.2 nM. The application of ratio fluorescent paper with a smartphone provides a facile method for the rapid detection of ions. [ABSTRACT FROM AUTHOR]

Paper spray ionization mass spectrometry (PSI MS) has emerged as a notable method for the rapid analysis of biological samples. However, the typical cellulose-based paper tip is incompatible with protein detection due to the strong interaction between cellulose hydroxyl groups and proteins. In this study, we utilized a commercially available polyolefin-based synthetic paper, Teslin®, as an alternative PSI substrate for simple protein analysis. We have named this method "droplet PSI" MS, as the aqueous protein solution droplet retains its shape on the Teslin® paper tip. For droplet PSI, no further chemical pretreatment was necessary for the Teslin® substrate; the only required preparation was shaping the Teslin® paper into a triangular tip. In droplet PSI MS, protein ion signals were instantly detected from a protein solution droplet upon applying a spray solvent in situ along with high voltage (HV). When compared with conventional PSI MS, our method demonstrated superior sensitivity. The droplet PSI MS utilizing Teslin® also showcased flexibility in real-time observation of protein alterations induced by an acid additive. Additionally, the effects of spray solvent composition and the application method were discussed. [ABSTRACT FROM AUTHOR]

As a kind of biomass resource, waste office paper can be used as a carbon precursor to prepare carbon materials. In this work, carbon microspheres with regular shape, uniform particle size and high carbon content were successfully prepared from waste office paper via a hydrothermal synthesis method with sulfuric acid as the catalyst. The effects of reaction temperature and sulfuric acid dosage on the morphology of the carbon microspheres were studied. The formation mechanism of the carbon microspheres was investigated by analyzing the structure and composition of the products. The results show that the hydrolysis of cellulose in waste paper under hydrothermal conditions was the key for the formation of carbon microspheres. The temperature of hydrothermal reaction and the use of sulfuric acid can affect the morphology of carbon microspheres. The carbon microspheres synthesized at 210 °C with 10 mL sulfuric acid have the best surface morphology, with uniform particle size and higher dispersion. Cyclic voltammetry and electrochemical impedance spectroscopy show that the carbon microspheres have good capacitance performance and can be used in capacitors. This study provides a low-cost precursor for carbon microspheres as well as a new method for the recycle of waste paper.

Archival documents and artworks stored in libraries frequently undergo degradative processes promoted by the so-called “biodeteriogens” that inhabit these places. A renewed interest in plant-derived products has arisen in those research groups focusing on cultural heritage preservation and looking for new and safe disinfection techniques. In this view, essential oils (EOs) and their volatile organic constituents are very appealing thanks to their versatility of action. A literature survey of the scientific publications involving EOs and/or their major constituents related to the conservation of paper items of cultural heritage interest is presented here, aiming to reveal benefits and limitations of such peculiar plant-derived compounds.

Lumpy Skin Disease (LSD) is a notifiable viral disease caused by Lumpy Skin Disease virus (LSDV). It is usually associated with high economic losses, including a loss of productivity, infertility, and death. LSDV shares genetic and antigenic similarities with Sheep pox virus (SPV) and Goat pox (GPV) virus. Hence, the LSDV traditional diagnostic tools faced many limitations regarding sensitivity, specificity, and cross-reactivity. Herein, we fabricated a paper-based turn-on fluorescent Molecularly Imprinted Polymer (MIP) sensor for the rapid detection of LSDV. The LSDV-MIPs sensor showed strong fluorescent intensity signal enhancement in response to the presence of the virus within minutes. Our sensor showed a limit of detection of 101 log10 TCID50/mL. Moreover, it showed significantly higher specificity to LSDV relative to other viruses, especially SPV. To our knowledge, this is the first record of a paper-based rapid detection test for LSDV depending on fluorescent turn-on behavior. [ABSTRACT FROM AUTHOR]

To transform tall goldenrods, which are invasive alien plant that destroy the ecosystem of South Korea, into useful materials, cellulose fibers isolated from tall goldenrods are applied as EMI shielding materials in this study. The obtained cellulose fibers were blended with CNTs, which were used as additives, to improve the electrical conductivity. TGCF/CNT papers prepared using a facile paper manufacturing process with various weight percent ratios and thickness were carbonized at high temperatures and investigated as EMI shielding materials. The increase in the carbonization temperature, thickness, and CNT content enhanced the electrical conductivity and EMI SE of TGCF/CNT carbon papers. TGCF/CNT-15 papers, with approximately 4.5 mm of thickness, carbonized at 1300 °C exhibited the highest electrical conductivity of 6.35 S cm−1, indicating an EMI SE of approximately 62 dB at 1.6 GHz of the low frequency band. Additionally, the obtained TGCF/CNT carbon papers were flexible and could be bent and wound without breaking. [ABSTRACT FROM AUTHOR]

Due to the massive use and abuse of pesticides, practices which have led to serious threats to human health, the research community must develop on-site and rapid detection technology of pesticide residues to ensure food safety. Here, a paper-based fluorescent sensor, integrated with molecularly imprinted polymer (MIP) targeting glyphosate, was prepared by a surface-imprinting strategy. The MIP was synthesized by a catalyst-free imprinting polymerization technique and exhibited highly selective recognition capability for glyphosate. The MIP-coated paper sensor not only remained selective, but also displayed a limit of detection of 0.29 µmol and a linear detection range from 0.5 to 10 µmol. Moreover, the detection time only took about 5 min, which is beneficial for rapid detection of glyphosate in food samples. The detection accuracy of such paper sensor was good, with a spiked recovery rate of 92–117% in real samples. The fluorescent MIP-coated paper sensor not only has good specificity, which is helpful to reduce the food matrix interference and shorten the sample pretreatment time, but it also has the merits of high stability, low-cost and ease of operation and carrying, displaying great potential for application in the on-site and rapid detection of glyphosate for food safety.

Hydrogen sulfide (H2S) is widely found in oil and natural gas wells and industrial wastewater tanks. Owing to its high toxicity, the monitoring and detection of H2S in the air is essential. However, recent techniques for the quantitative detection of H2S gas suffer from limitations such as high cost, complicated operation, and insufficient sensitivity, preventing their practical application in industry. Thus, we have developed a portable test paper for real-time and inexpensive monitoring of H2S gas by color changes. The test paper had a significantly low H2S detection limit of 200 ppb, which is considered safe for humans. Moreover, the color of the test paper did not change noticeably when exposed to CO2, N2, O2, and air environments, indicating that the test paper is selective for H2S gas and can be stored for a long time. In addition, we fitted a color difference linear model between the color difference values (ΔE) and the concentrations of H2S gas. The establishment of the linear model substantiates that the test paper can provide accurate intensity information when detecting H2S gas leakage. [ABSTRACT FROM AUTHOR]

Combining biologically active compounds with nanocarriers is an emerging and promising strategy for enhancing the activities of molecules while reducing their levels of toxicity. Green nanomaterials have recently gained momentum in developing protocols for treating and preserving artifacts. In this study, we designed a functional biohybrid material by incorporating tributyltin(IV) ferulate (TBT-F) into halloysite nanotubes (HNTs), generating a new formulation called HNT/TBT-F. The primary objective was to develop a formulation with robust antimicrobial properties and reinforcing features for treating paper with artistic and historical value. To characterize HNT/TBT-F, assess the HNT’s loading capacity, and investigate the TBT-F release kinetics from the nanotubes, various analytical techniques, including UV-Vis and infrared spectroscopies, thermogravimetry, and microscopy analysis, were employed. Furthermore, we evaluated the antimicrobial potential of TBT-F and HNT/TBT-F against Kocuria rhizophila, a bacterial strain known for its opportunistic behavior and a cause of artifact biodeterioration. HNT/TBT-F exhibited a significantly stronger bactericidal effect than TBT-F alone against K. rhizophila cells growing planktonically or those forming a biofilm. This enhanced performance could relate to the confinement of TBT-F within the nanotubes, which likely improved its physical-chemical stability and increased the local concentration of TBT-F upon contact with the bacterial cells. Additionally, we evaluated the mechanical properties of a paper treated with HNT/TBT-F, assessing any potential alterations in its color. The findings of this study highlight the favorable attributes of the HNT/TBT-F formulation and its potential for developing protocols aimed at consolidating and preserving culturally significant paper objects.

This Special Issue entitled “Feature Papers in Food Chemistry—2nd edition” is a collection of relevant, open access, high-quality papers (original research articles or comprehensive review papers) [...]

This paper reports an innovative study that aims to address key issues in the efficient recycling of wastepaper cellulose. The research team utilized the temperature-responsive upper critical solution temperature (UCST) polymer P(NAGA-b-DMA) in combination with the LytA label's affinity for choline analogs. This innovative approach enabled them to successfully develop a novel soluble immobilized enzyme, P(NAGA-b-DMA)-cellulase. This new enzyme has proven highly effective, significantly enhancing the degradation of wastepaper cellulose while demonstrating exceptional stability. Compared with the traditional insoluble immobilized cellulase, the enzyme showed a significant improvement in the pH, temperature stability, recycling ability, and storage stability. A kinetic parameter calculation showed that the enzymatic effectiveness of the soluble immobilized enzyme was much better than that of the traditional insoluble immobilized cellulase. After the immobilization reaction, the Michaelis constant of the immobilized enzyme was only increased by 11.5%. In the actual wastepaper degradation experiment, the immobilized enzyme was effectively used, and it was found that the degradation efficiency of wastepaper cellulose reached 80% of that observed in laboratory conditions. This novel, thermosensitive soluble immobilized cellulase can efficiently catalyze the conversion of wastepaper cellulose into glucose under suitable conditions, so as to further ferment into environmentally friendly biofuel ethanol, which provides a solution to solve the shortage of raw materials and environmental protection problems in the paper products industry. [ABSTRACT FROM AUTHOR]

Phosphorylated cellulose can be an intrinsic flame retardant and a promising alternative for halogenated fire inhibitors. In this study, the mixture of di-ammonium hydrogen phosphate (DAP) and urea (U), containing phosphate and nitrogen groups, was applied to attain fire inhibitor properties. Functional groups of cellulose were grafted with phosphorous by keeping the constant molar ratio of 1/1.2/4.9 between anhydroglucose units of cellulose/DAP/U in different concentrations of bleached kraft pulp. Phosphorus concentrations were determined using the ICP hrOES method, and paper sheets were made using the Rapid Köthen apparatus. The tensile strength of phosphorylated cellulose increased twice compared with unmodified cellulose when the phosphorous concentration increased to 10,000 g/kg. An increase in the tensile index comes from the higher freeness of pulp and cross-linking of the phosphorous group between cellulose fibers. Remarkable fire retardancy effects were achieved in cellulose concentrations above 5 wt%. The raised phosphorous concentration above 10,000 g/kg due to the phosphorylation process caused the formation of a char layer on a cellulose surface and the nonflammable gas emission. That effect was indirectly confirmed by reducing the combustion temperature and HRR by 50 and 45%, respectively. Due to increasing phosphorus concentration in cellulose sheets, cellulose’s fire and strength properties increased significantly.

Converting paper-grade bleached Kraft pulp into dissolving pulp using eco-friendly chemicals on-site at the mill is a challenge for the pulp industry. In this study, two oxidation systems are evaluated: the first one is based on the use of hydrogen peroxide at various levels of alkalinity; the second one investigates the use of sodium periodate followed by hydrogen peroxide to convert aldehydes into carboxyls and enhance their hemicelluloses removal. Our results have shown that when using only peroxide, the removal of hemicelluloses was not sufficient to improve the pulp's dissolving ability. Conversely, the periodate–peroxide system proved to be more efficient. Results regarding the pulp purity, solubility, degradation (pulp viscosity and cellulose molecular mass distribution), brightness, and its potential applications were discussed. [ABSTRACT FROM AUTHOR]

Estrogens in personal care products are harmful to customers. Conventional methods such as HPLC and LC-MS require tedious sample pretreatment and long analytical time. Paper-spray ionization mass spectrometry (PSI-MS) is a powerful tool for the determination of compounds with little time and minimal pretreatment procedures. Since most estrogens show poor responses in PSI-MS, we developed a chemical derivatization and PSI-MS method to determinate three estrogens: estradiol, estriol and ethinyloestradiol with estradiol valerate as the internal standard (I.S.). After derivatization with 2-fluoro-1-methyl-pyridinium-p-toluene-sulfonate, the three estrogens could be quantified in seconds. This method showed good linearity in the range of 0.1~30 μg·mL−1, with R2 > 0.999. Their recovery results were all between 85%~115%. The limits of detection (LOD) were 0.04 μg·mL−1, 0.02 μg·mL−1 and 0.02 μg·mL−1 for estradiol, estriol and ethinyloestradiol respectively, which improved around 200, 2000, and 900 times compared to non-derivative PSI-MS. The method could quantitatively determine estrogens in cosmetics.

In 2014, a new type of the fire-resistant paper based on ultralong hydroxyapatite (HAP) nanowires was reported by the author’s research group, which had superior properties and promising applications in various fields, such as high-temperature resistance, fire retardance, heat insulation, electrical insulation, energy, environmental protection, and biomedicine. The wet end chemical properties of the fire-resistant paper pulp are very important for papermaking and mechanical performance of the paper, which play a guiding role in the practical production of the fire-resistant paper. In this paper, the wet end chemical properties of a new kind of fire-resistant paper pulp based on ultralong HAP nanowires are studied for the first time by focusing on the wet end chemical parameters, the effects of these parameters on the properties such as flocculation, retention, draining, and white water circulation of the fire-resistant paper pulp, and their effects on the properties of the as-prepared fire-resistant paper. The experimental results indicated that the wet end chemical properties of the new kind of fire-resistant paper pulp based on ultralong HAP nanowires were unique and entirely different from those of the traditional paper pulp based on plant fibers. The wet end chemical properties of the fire-resistant paper pulp were significantly influenced by the inorganic adhesive and its content, which affected the runnability of the paper machine and the properties of the as-prepared fire-resistant paper. The flocculation properties of the fire-resistant paper pulp based on ultralong HAP nanowires were affected by the conductivity and Zeta potential. The addition of the inorganic adhesive in the fire-resistant paper pulp based on ultralong HAP nanowires could significantly increase the conductivity of the fire-resistant paper pulp, reduce the particle size of paper pulp floccules, and increase the tensile strength of the fire-resistant paper. In addition, the fire-resistant paper pulp based on ultralong HAP nanowires in the presence of inorganic adhesive exhibited excellent antibacterial performance. This work will contribute to and accelerate the commercialization process and applications of the new type of the fire-resistant paper based on ultralong HAP nanowires.

Porous aromatic framework materials with high stability, sensitivity, and selectivity have great potential to provide new sensors for optoelectronic/fluorescent probe devices. In this work, a luminescent porous aromatic framework material (LNU-23) was synthesized via the palladium-catalyzed Suzuki cross-coupling reaction of tetrabromopyrene and 1,2-bisphenyldiborate pinacol ester. The resulting PAF solid exhibited strong fluorescence emission with a quantum yield of 18.31%, showing excellent light and heat stability. Because the lowest unoccupied molecular orbital (LUMO) of LNU-23 was higher than that of the nitro compounds, there was an energy transfer from the excited LNU-23 to the analyte, leading to the selective fluorescence quenching with a limit of detection (LOD) ≈ 1.47 × 10−5 M. After integrating the luminescent PAF powder on the paper by a simple dipping method, the indicator papers revealed a fast fluorescence response to gaseous nitrobenzene within 10 s, which shows great potential in outdoor fluorescence detection of nitro compounds.

Samples of papers artificially (2 to 60 days) and naturally (10, 45, and 56 years) aged were studied by the Py-GC/MS method to identify decomposition products. Possible reaction scenarios for cellulose degradation were developed. One of the degradation products is acetic acid, which can (auto)catalyze the cleavage of cellulose β(1→4)-glycosidic bonds of cellulose polymer chains. However, during 20 s of Py-GC/MS analysis, temperatures of up to 300 °C did not significantly increase or modify the formation of decomposition products of paper components. At 300 °C, the amount of several cellulose decomposition products increased regularly depending on the number of days of artificial aging and natural aging, demonstrated mainly by the generation of 2-furancarboxaldehyde, 5-hydroxymethylfurfural, and levoglucosan and its consecutive dehydration products. No correlation between the amount of lignin decomposition products and the time of aging was found when the pyrolysis was performed at 300 °C and 500 °C. Compounds present in the products of decomposition at 500 °C bear the imprint of the chemical composition of the sampled paper. Pyrograms taken at 300 °C using the Py-GC/MS method can give additional information on the changes in the chemical structure of paper during natural or artificial aging, mainly about the cleavage of β(1→4)-glycosidic bonds during aging. [ABSTRACT FROM AUTHOR]

Combining biologically active compounds with nanocarriers is an emerging and promising strategy for enhancing the activities of molecules while reducing their levels of toxicity. Green nanomaterials have recently gained momentum in developing protocols for treating and preserving artifacts. In this study, we designed a functional biohybrid material by incorporating tributyltin(IV) ferulate (TBT-F) into halloysite nanotubes (HNTs), generating a new formulation called HNT/TBT-F. The primary objective was to develop a formulation with robust antimicrobial properties and reinforcing features for treating paper with artistic and historical value. To characterize HNT/TBT-F, assess the HNT's loading capacity, and investigate the TBT-F release kinetics from the nanotubes, various analytical techniques, including UV-Vis and infrared spectroscopies, thermogravimetry, and microscopy analysis, were employed. Furthermore, we evaluated the antimicrobial potential of TBT-F and HNT/TBT-F against Kocuria rhizophila, a bacterial strain known for its opportunistic behavior and a cause of artifact biodeterioration. HNT/TBT-F exhibited a significantly stronger bactericidal effect than TBT-F alone against K. rhizophila cells growing planktonically or those forming a biofilm. This enhanced performance could relate to the confinement of TBT-F within the nanotubes, which likely improved its physical-chemical stability and increased the local concentration of TBT-F upon contact with the bacterial cells. Additionally, we evaluated the mechanical properties of a paper treated with HNT/TBT-F, assessing any potential alterations in its color. The findings of this study highlight the favorable attributes of the HNT/TBT-F formulation and its potential for developing protocols aimed at consolidating and preserving culturally significant paper objects. [ABSTRACT FROM AUTHOR]

Hg2+ is one of the most dangerous pollutants that can cause damage to organs and the immune system. The common detection methods of Hg2+ require sophisticated instrumentation and a long time for analysis. The purpose of this study was to develop a sensor for the detection of Hg2+ using filter paper immobilized by gold nanoparticles (AuNPs) conjugated with cyanuric acid (CA). The clear color change from pink to bluish purple is the response of the CA-AuNPs filter paper sensor to exposure to Hg2+. Detection can be observed visually with the naked eye and/or with imageJ software; the detection limit is 0.05 µM. The colorimetric response of the sensor was also selective towards Hg2+ after testing with different metal ions. In addition, the response from the sensor was also consistent for lake water samples spiked with Hg2+. The results of this research provide a promising basic technology for the development of sensors that are affordable, fast, portable, and easy to use for the detection and monitoring of Hg2+ levels in water.