Search

Municipal sludge biochar (MSBC) can be used to absorb phosphorus in water for waste treatment. Nano-zero-valent zinc (nZVZ) was uniformly attached to MSBC to obtain a highly efficient phosphorus-absorbing composite material, nZVZ–MSBC. Characterization by FTIR, XPS, XRD, and BET showed that nZVZ was uniformly dispersed on the surface of the MSBC. Zinc loading was able to greatly improve the adsorption performance of MSBC for phosphorus. Adsorption experiments illustrated that the adsorption process conformed to the Langmuir model, and the maximum adsorption amount was 186.5 mg/g, which is much higher than that for other municipal sludge biochars. The adsorption process reached 80% of the maximum adsorption capacity at 90 min, and this gradually stabilized after 240 min; adsorption equilibrium was reached within 24 h. The optimum pH for adsorption was 5. The main adsorption mechanism was chemical adsorption, but physical adsorption, external diffusion, internal diffusion, and surface adsorption also played roles. The potential for application as an efficient adsorbent of phosphorus from water was confirmed. In addition, a novel strategy for municipal sludge disposal and resource utilization is provided. [ABSTRACT FROM AUTHOR]

Lithium-sulfur (Li-S) batteries are regarded as one of the promising advanced energy storage systems due to their ultrahigh capacity and energy density. However, their practical applications are still hindered by the serious shuttle effect and sluggish reaction kinetics of soluble lithium polysulfides. Herein, g-C3N4 nanosheets and graphene decorated with an ultrafine Co-species nanodot heterostructure (Co@g-C3N4/G) as separator coatings were designed following a facile approach. Such an interlayer can not only enable effective polysulfide affinity through the physical barrier and chemical binding but also simultaneously have a catalytic effect on polysulfide conversion. Because of these superior merits, the Li-S cells assembled with Co@g-C3N4/G-PP separators matched with the S/KB composites (up to ~70 wt% sulfur in the final cathode) exhibit excellent rate capability and good cyclic stability. A high specific capacity of ~860 mAh g−1 at 2.0 C as well as a capacity-fading rate of only ~0.035% per cycle over 350 cycles at 0.5 C can be achieved. This bifunctional separator can even endow a Li-S cell at a low current density to exhibit excellent cycling capability, with a capacity retention rate of ~88.4% at 0.2 C over 250 cycles. Furthermore, a Li-S cell with a Co@g-C3N4/G-PP separator possesses a stable specific capacity of 785 mAh g−1 at 0.2 C after 150 cycles and a superior capacity retention rate of ~84.6% with a high sulfur loading of ~3.0 mg cm−2. This effective polysulfide-confined separator holds good promise for promoting the further development of high-energy-density Li-S batteries. [ABSTRACT FROM AUTHOR]

Municipal sludge biochar (MSBC) can be used to absorb phosphorus in water for waste treatment. Nano-zero-valent zinc (nZVZ) was uniformly attached to MSBC to obtain a highly efficient phosphorus-absorbing composite material, nZVZ–MSBC. Characterization by FTIR, XPS, XRD, and BET showed that nZVZ was uniformly dispersed on the surface of the MSBC. Zinc loading was able to greatly improve the adsorption performance of MSBC for phosphorus. Adsorption experiments illustrated that the adsorption process conformed to the Langmuir model, and the maximum adsorption amount was 186.5 mg/g, which is much higher than that for other municipal sludge biochars. The adsorption process reached 80% of the maximum adsorption capacity at 90 min, and this gradually stabilized after 240 min; adsorption equilibrium was reached within 24 h. The optimum pH for adsorption was 5. The main adsorption mechanism was chemical adsorption, but physical adsorption, external diffusion, internal diffusion, and surface adsorption also played roles. The potential for application as an efficient adsorbent of phosphorus from water was confirmed. In addition, a novel strategy for municipal sludge disposal and resource utilization is provided.

Lithium-sulfur (Li-S) batteries are regarded as one of the promising advanced energy storage systems due to their ultrahigh capacity and energy density. However, their practical applications are still hindered by the serious shuttle effect and sluggish reaction kinetics of soluble lithium polysulfides. Herein, g-C3N4 nanosheets and graphene decorated with an ultrafine Co-species nanodot heterostructure (Co@g-C3N4/G) as separator coatings were designed following a facile approach. Such an interlayer can not only enable effective polysulfide affinity through the physical barrier and chemical binding but also simultaneously have a catalytic effect on polysulfide conversion. Because of these superior merits, the Li-S cells assembled with Co@g-C3N4/G-PP separators matched with the S/KB composites (up to ~70 wt% sulfur in the final cathode) exhibit excellent rate capability and good cyclic stability. A high specific capacity of ~860 mAh g−1 at 2.0 C as well as a capacity-fading rate of only ~0.035% per cycle over 350 cycles at 0.5 C can be achieved. This bifunctional separator can even endow a Li-S cell at a low current density to exhibit excellent cycling capability, with a capacity retention rate of ~88.4% at 0.2 C over 250 cycles. Furthermore, a Li-S cell with a Co@g-C3N4/G-PP separator possesses a stable specific capacity of 785 mAh g−1 at 0.2 C after 150 cycles and a superior capacity retention rate of ~84.6% with a high sulfur loading of ~3.0 mg cm−2. This effective polysulfide-confined separator holds good promise for promoting the further development of high-energy-density Li-S batteries.

Control over spin states at the single molecule level is a key issue in the emerging field of molecular spintronics. Here, we explore the chemical adsorption effect on the magnetic and spin-transport properties of individual magnetic molecule by performing extensive density functional theory calculations in combining with non-equilibrium Green’s function method. Theoretical results clearly reveal that the molecular magnetic moment of Mn-salophen can be effectively tuned by adsorbing F and CO on the central Mn cation, while the adsorbed NO molecule quenches the molecular magnetic moment. Without chemical adsorption, the currents through Mn-salophen molecular junction just show a little distinction for two spin channels, which agrees well with previous investigation. Remarkably, the conductive channel can be switched from the spin-up electrons to the spin-down electrons via adsorbing F and CO, respectively, and the corresponding two Mn-salophen molecular junctions with chemical modifications display nearly perfect spin-filtering effect. The observed spin switch and the predicted spin-filtering effect via chemical adsorption indicates that Mn-salophen holds potential applications in molecular spintronic devices.

Control over spin states at the single molecule level is a key issue in the emerging field of molecular spintronics. Here, we explore the chemical adsorption effect on the magnetic and spin-transport properties of individual magnetic molecule by performing extensive density functional theory calculations in combining with non-equilibrium Green's function method. Theoretical results clearly reveal that the molecular magnetic moment of Mn-salophen can be effectively tuned by adsorbing F and CO on the central Mn cation, while the adsorbed NO molecule quenches the molecular magnetic moment. Without chemical adsorption, the currents through Mn-salophen molecular junction just show a little distinction for two spin channels, which agrees well with previous investigation. Remarkably, the conductive channel can be switched from the spin-up electrons to the spin-down electrons via adsorbing F and CO, respectively, and the corresponding two Mn-salophen molecular junctions with chemical modifications display nearly perfect spin-filtering effect. The observed spin switch and the predicted spin-filtering effect via chemical adsorption indicates that Mn-salophen holds potential applications in molecular spintronic devices. [ABSTRACT FROM AUTHOR]