Search

Expansive soils, widely distributed in nature, often pose challenges to construction stability due to their low unconfined compressive strength (UCS), poor shear strength, and high expansibility. This study investigates the application of phosphoric acid (H3PO4) in modifying sodium bentonite, focusing on its effects on the mechanical properties and swelling behavior of bentonite, as well as the underlying mechanisms. H3PO4 was added to bentonite at mass ratios of 1% to 8%. Compared to unmodified bentonite, the plastic index of the modified bentonite decreased by 39.9%, and the UCS value increased by 92.24% when the H3PO4 dosage was 2%. Notably, at an H3PO4 dosage of 8%, the free swelling rate of the modified bentonite decreased by 38.1% relative to the control sample, and the cohesion increased by 165.35%, indicating significant improvements in both the expansibility and bearing capacity of modified bentonite. The results on the physical and chemical properties of modified bentonite revealed an ion exchange involving hydrogen ions from H3PO4 and metal cations in sodium bentonite. The zeta potential of bentonite decreased with H3PO4 addition, reflecting a reduction in the double electric layer thickness due to hydrogen ion exchange with metal cations. This enhanced the gravitational attraction between soil particles, leading to their closer proximity and a significant increase in the UCS value of the modified soil. Additionally, the XRD results confirmed that the addition of H3PO4 facilitated the formation of a new mineral, aluminum phosphate, which is hard and insoluble, filling soil pores, contributing to its densification. This study demonstrates that H3PO4 can effectively enhance the swelling resistance and strength of sodium bentonite, offering a promising method to improve its application performance. [ABSTRACT FROM AUTHOR]

High-Density Polyethylene (HDPE) and Low-Density Polyethylene (LDPE) films were used to create nanoplastic (NP) models, with the shape of delamination occurring during degradation. In the case of HDPE, selective degradation occurred not only in the amorphous part, but also in the crystalline part at the same time. Some of the lamellae that extend radially to form the spherulite structure were missing during the 30-day degradation. The length of these defects was less than 1 µm. HDPE disintegrated within units of spherulite structure by conformational defects in lamellae, and the size of the fragments obtained had a wide distribution. LDPE was synthesized by radical polymerization, so it contained a cross-linked part. The part was not sufficiently fused, and when it degraded, it delaminated and separated preferentially. The zeta potential reached a minimum value of approximately −20 mV at the degradation time of 21 days, and then increased. This complex dependence on degradation time was due to NP particle aggregation. The addition of 1% Triton(R) X-114 surfactant was effective in stabilizing the NP dispersion. The particle size remained constant at around 20 nm for degradation times of 15–30 days. [ABSTRACT FROM AUTHOR]

To address cadmium pollution in China's cultivated land, chitosan, inorganic and organic selenium were used to modify rice husk charcoal for cadmium inhibition. Basic physicochemical properties of rice husk carbons were characterized (BET, FTIR, XRD, Zeta potential). Kinetic and isothermal adsorption experiments studied the adsorption of Cd2+ by modified biochar under different pH and dosages. A350 and C350 had pore changes, and B350 had a smoother surface. The polarity and Zeta potential of A350, B350, and C350 differed. B350 and C350's kinetic adsorption fit the pseudo second order model, A350's fit both the pseudo first and second order. Their isothermal adsorption fit Langmuir (B350, C350) and Freundlich (A350). Intraparticle diffusion was three-stage with single-layer chemical adsorption. The pH increase raised removal and adsorption of CK350, A350, B350, and C350. The dosage increase hiked removal but cut unit adsorption. A350 had the highest max adsorption (57.845 mg/g). All modifications enhanced Cd2+ adsorption, and the effect could be altered by adjusting pH and dosage. [ABSTRACT FROM AUTHOR]

Cellulose nanocrystals (CNCs) prepared by sulfuric acid hydrolysis were added to phthalocyanine green colour pastes with a surfactant to improve stability. The particle size, zeta potential, absorbance, and microstructure of the colour pastes were analyzed and characterized. The mechanism of CNCs to enhance the stability of hydrophobic phthalocyanine green in water was investigated. The functionalized application of the colour pastes was explored by mixing colour pastes with coating-forming substances to prepare phthalocyanine green paint. The results show that CNCs could enhance the stability of phthalocyanine green in water and form a binary system with non-ionic surfactants in colour pastes. The system could make phthalocyanine green colour pastes have very good dispersion and stability and mix well with coating-forming substances. The phthalocyanine green paint had excellent performance. As a renewable and naturally degradable biomass resource, CNCs have the potential to be applied for the dispersion and stabilization of hydrophobic pigments by compounding with surfactants. [ABSTRACT FROM AUTHOR]

This study optimized the process of extracting protein from black garlic using an alkaline dissolution and acid precipitation method through response surface methodology. The optimal extraction conditions were determined as a solid-to-liquid ratio of 1:50, an extraction time of 100 min, an extraction temperature of 30 °C, and an alkaline extraction pH of 9.0. Under these optimized conditions, the actual black garlic protein (BGP) extraction yield was 12.10% ± 0.21%, and the isoelectric point of the obtained BGP was 3.1. Subsequently, this study extracted black garlic protein under optimal conditions and subjected it to enzymatic hydrolysis using different enzymes (trypsin, pepsin, and their mixed enzymes). The functional characteristics, antioxidant activity, and hypoglycemic activity of black garlic protein before and after enzymatic hydrolysis were compared. Among the hydrolysates, the pepsin hydrolysate (BGPH-P) had the smallest particle size (188.57 ± 1.93 nm) and the highest Zeta potential (−29.93 ± 0.42 mV). Scanning electron microscopy showed that BGPH-P had the smallest and most dispersed particles. Fourier-transform infrared (FTIR) spectroscopy revealed that the dual enzymatic hydrolysis hydrolysate (BGPH-PT) exhibited the most stable structure. Compared to BGP, the hydrolysates demonstrated significantly improved solubility, water-holding capacity, and foaming ability (p < 0.05), while their emulsifying activity, emulsion stability, DPPH radical scavenging capacity, and hypoglycemic activity decreased. In summary, the BGP extracted using the optimized process demonstrated good antioxidant and hypoglycemic activities, while its enzymatic hydrolysate BGPH-P exhibited excellent solubility, water-holding capacity, and emulsifying properties, providing valuable insights for the further development of black garlic protein and its hydrolysates. [ABSTRACT FROM AUTHOR]

The efficient recovery of fine argentite from polymetallic lead–zinc (Pb–Zn) sulfide ore is challenging. This study investigated nanobubble (NB) adsorption on the argentite surface and its role in enhancing fine argentite flotation using various analytical techniques, including contact angle measurements, adsorption capacity analysis, infrared spectroscopy, zeta potential measurements, turbidity tests, microscopic imaging, scanning electron microscopy, and flotation experiments. Results indicated that the NBs exhibited long-term stability and were adsorbed onto the argentite surface, thereby enhancing surface hydrophobicity, reducing electrostatic repulsion between fine argentite particles, and promoting particle agglomeration. Furthermore, the NBs formed a thin film on the argentite surface, which decreased the adsorption of sodium diethyldithiocarbamate. Microflotation tests confirmed that the introduction of NBs considerably enhanced the recovery of argentite using flotation technology. [ABSTRACT FROM AUTHOR]

Brochantite was precipitated using stoichiometric amounts of CuSO4 and NaOH and characterized by scanning electron microscopy, specific surface area, thermogravimetric analysis, and zeta potential. Brochantite can be converted into paratacamite, basic copper bromide, and copper phthalate by shaking the powder with solutions containing excess corresponding anions. By contrast, attempts to convert brochantite into basic iodide, acetate, nitrate, or rhodanide in a similar way failed, that is, the powder after shaking with solutions containing excess corresponding anions still showed the powder X-ray diffraction pattern of brochantite. Successful ion exchange resulted in a decrease in the specific surface area by a factor of 10, but the specific surface area was unchanged when attempts to exchange the anion failed. Interestingly enough, paratacamite can also be converted into brochantite by shaking with solution containing excess sulfate. Brochantite and paratacamite obtained by precipitation and the salts obtained by ion exchange showed a negative zeta potential at pH > 9. [ABSTRACT FROM AUTHOR]

The sea cucumber intestine (SI), a secondary product from sea cucumber processing, contains polysaccharides as one of its active ingredients, and fermentation is an effective method for extracting bioactive substances from food by-products. In this study, to explore the effect of Enterococcus hirae GS22 fermentation on the extraction of SI polysaccharides, the polysaccharides were extracted through the SI with and without Enterococcus hirae GS22 fermentation, and the obtained polysaccharides were designated as SC-PF and SC-P. The extraction yield, the structural characteristics, and the biological functions of the polysaccharides were then evaluated. The results indicated that Enterococcus hirae GS22 could grow well using SI as the substrate and that fermentation could improve the extraction yield of the polysaccharide from 0.48% to 0.63%, decrease the molecular weight (Mw), and change the monosaccharide composition. The diameter of SC-PF was smaller than SC-P, and the absolute value of the zeta potential of SC-PF was found to be lower than SC-P. Fermentation does not change the functional group or the thermal ability of the polysaccharide. SC-PF had better antioxidant ability than SC-P; the DPPH and superoxide anion scavenging ability were 96.3% and 36.5%, respectively. SC-PF also showed nearly 1.3- and 1.1-fold higher inhibition of α-glucosidase and α-amylase as compared to SC-P. The current results showed that E. hirae GS22 fermentation has the potential to extract SI polysaccharides with better prebiotic abilities. [ABSTRACT FROM AUTHOR]

The rising incidence of vulvovaginal candidiasis (VVC) has been leading to the development of alternative antifungal therapies. This study aimed to develop a topical chitosan–oleic acid nanoparticle (CH-OA-NP) cream loaded with lemon peel essential oil (LPEO) for VVC treatment. The characterization of the optimal nanoparticle formulation (F4: 10 g/L CH, 2:1 OA/LPEO ratio) showed high encapsulation efficiency, stability, and controlled release. Moreover, it was characterized regarding its particle size, polydispersity index, zeta potential, and chemical/morphological profile. LPEO-related compounds (e.g., eriodictyol) were identified through LC-ESI-QqTOF-HRMS in the cream matrix, suggesting the preservation of LPEO potential bioactivities after formulation. In silico docking of 12 LPEO metabolites revealed that compounds such as citronellic acid exerted inhibitory effects against several inflammation-associated enzymes (e.g., 14-α-Demethylase). In vitro antimicrobial tests demonstrated remarkable activity against Candida albicans, Gram-negative (e.g., Escherichia coli), and Gram-positive (e.g., Staphylococcus aureus) bacteria. In vivo studies in a rat model of VVC revealed significant antifungal, anti-inflammatory, and immunomodulatory effects of the LPEO-CH-OA-NP cream (5% and 10%), leading to reduced MDA, MPO, and IL-1β levels and increased GSH activity. This novel formulation potentially offers a promising alternative therapy for VVC, addressing the current antifungal therapies' limitations, counteracting drug resistance. [ABSTRACT FROM AUTHOR]

The rapid expansion of medical nanotechnology has significantly broadened the potential applications of cellulose nanocrystals (CNCs). While CNCs were initially developed for drug delivery, they are now being investigated for a range of advanced biomedical applications. As these applications evolve, it becomes crucial to understand the physicochemical behavior of CNCs in biologically relevant media to optimize their design and ensure biocompatibility. Functionalized CNCs can adsorb biomolecules, forming a "protein corona" that can impact their physicochemical properties, including alterations in particle size, zeta potential, and overall functionality. In this study, CNCs were coated with low (8500 Da)- and high (400,000–500,000 Da)-molecular-weight cationic polymer (poly(diallyldimethylammonium chloride—(PDDA) via non-covalent grafting, and their physicochemical characteristics, as well as their biological effects, were assessed in physiologically relevant media after sterilization. Our findings show that autoclaving significantly alters the physicochemical properties of CNC-PDDA, particularly when coated with low-molecular-weight (LMW) polymer. Furthermore, we observed that CNC-PDDA of a high molecular weight (HMW) has a greater impact on cell viability and blood biocompatibility than its LMW counterpart. Moreover, cellular immune responses to both CNC-PDDA LMW and HMW vary in the presence or absence of serum, implying that protein adsorption influences cell-nanomaterial recognition and their biological activity. This study provides valuable insights for optimizing CNC-based nanomaterials for therapeutic applications. [ABSTRACT FROM AUTHOR]

Berberine hydrochloride (BH) extracted from Coptis chinensis (CC) and Matrine (MT) separated from Sophora flavescens (SF) are alkaloids with potent anti-bacterial, anti-inflammatory, and anti-tumor effects. Motivated by the clinical practice of using CC and SF together, we aimed to demonstrate that the synergistic application of the natural compounds BH and MT could enhance therapeutic effects and minimize side effects. Two types of liposomes, liposomes containing only BH (BH-LP) and liposomes containing both BH and MT (BH-MT-LP), were successfully prepared via the reverse evaporation method. The liposome preparation process was optimized by single-factor screening and the Box–Behnken experimental design method. The results showed that the liposomes had particle sizes in the range of 222.7 to 235.4 nm, polydispersity indicated in the range of 11.8% to 23.3%, and zeta potentials in the range of −35.9 to −31.1 mv. BH-MT-LP showed superior anti-tumor activity against MDA-MB-231, HepG-2, and HGC-27 cells in vitro. The incorporation of MT effectively promoted the anti-tumor effect of BH, while the controlled release from liposomes further enhanced the therapeutic efficacy of BH. Furthermore, based on the flow cytometry results, we speculated that BH-MT-LP might promote apoptosis by blocking the G1 phase of cells and inducing cell death. In conclusion, BH-MT-LP provides evidence for the combined use of natural compounds as a stable, safe, and practical drug delivery system for the treatment of potential cancers. Meanwhile, the successful preparation for BH-MT-LP also provides a new approach to the combined use of traditional Chinese medicine ingredients. [ABSTRACT FROM AUTHOR]

Chitosan (Ch), a natural polysaccharide, is known for its biocompatibility, biodegradability, and various beneficial properties, including antioxidant and antibacterial activities. The objective of this study is to investigate the functionalization of zinc oxide (ZnO) with chitosan to develop a novel ZnO@Ch adduct for use in cosmetic formulations, specifically as a sun protection agent. The functionalization was achieved through ionotropic gelation, which enhanced the stability and reduced the photocatalytic activity of ZnO, thereby improving its safety profile for skin applications. FTIR spectroscopy confirmed the successful functionalization, while TGA and DSC characterized the thermal properties and stability. The Zeta potential and particle size analyses demonstrated improved stability of ZnO@Ch across various pH levels compared to uncoated ZnO. The structure of the obtained adduct was also confirmed by SEM analysis. The ZnO@Ch adduct exhibited enhanced stability at neutral and slightly alkaline pH values, reduced photocatalytic activity compared to pure ZnO, and had lower cytotoxicity in 3T3 cells compared to pure ZnO, particularly at higher concentrations. The ZnO@Ch adduct provided a higher Sun Protection Factor (SPF) and UVA Protection Factor (UVA-PF) than pure ZnO, indicating enhanced UV protection. The adduct's ability to provide higher SPF at lower ZnO concentrations offers economic and environmental benefits, aligning with sustainable product design principles. Future studies will focus on optimizing the formulation and testing the efficacy and safety at higher concentrations to fully realize its potential as a natural, eco-friendly sunscreen ingredient. [ABSTRACT FROM AUTHOR]

Protein adsorption behavior was examined on poly(N-isopropylacrylamide-co-sodium methacrylate)-based hydrogels at different temperatures: 5, 20, and 37 °C, and pH: 4.5, 7, and 9.2. The hydrogels, whose covalent skeleton contains pendant anionic units due to the presence of the sodium methacrylate co-monomer, exhibited both thermo- and pH-sensitivity with different extents, which depended on the content of ionizable moieties and the cross-linker density. The hydrogel composition, temperature, and pH influenced the zeta potential of the hydrogels and their swelling properties. The proteins selected for the study, i.e., bovine serum albumin (BSA), ovalbumin (OVA), lysozyme (LYZ), and a monoclonal antibody (mAb2), differed in their aminoacidic composition and conformation, thus in isoelectric point, molecular weight, electrostatic charge, and hydrophobicity. Therefore, the response of their adsorption behavior to changes in the solution properties and the hydrogel composition was different. LYZ exhibited the strongest adsorption of all proteins with a maximum at pH 7 (189.5 m g   g g e l − 1 ); adsorption of BSA and OVA reached maximum at pH 4.5 (24.4 and 23.5 m g   g g e l − 1 ), whereas mAb2 was strongly adsorbed at 9.2 (21.7 m g   g g e l − 1 ). This indicated the possibility of using the hydrogels for pH-mediated separation of proteins differing in charge under mild conditions in a water-rich environment of both the liquid solution and the adsorbed phase. The adsorption affinity of all proteins increased with temperature, which was attributed to the synergistic effects of attractive electrostatic and hydrophobic interactions. That effect was particularly marked for mAb2, for which the temperature change from 5 to 37 °C caused a twentyfold increase in adsorption. In all cases, the proteins could be released from the hydrogel surface by a reduction in temperature, an increase in pH, or a combination of both. This allows for the elimination of the use of salt solution as a desorbing agent, whose presence renders the recycling of buffering solutions difficult. [ABSTRACT FROM AUTHOR]

Ultrasonic technology has drawn extensive interests for its great potential in marine antifouling applications. However, its effects on the adhesion behavior of marine fouling organisms on marine structures remain underexplored. This work investigated how ultrasonic treatment impacted the adhesion of Pseudoalteromonas on a gel-like marine epoxy primer. And the process parameters for ultrasonic treatment were optimized using response surface analysis with Design-Expert software 11. The results revealed that ultrasonic treatment disrupted the cellular structure of Pseudoalteromonas, causing the deformation and fragmentation of the cell membrane, leading to bacterial death. Additionally, ultrasonic treatment reduced the particle size and Zeta potential value of Pseudoalteromonas, which disrupted the stability of bacterial suspensions. It also increased the relative surface hydrophobicity of Pseudoalteromonas cells, resulting in a reduction in adhesion to the gel-like marine epoxy primer. This study demonstrated that ultrasonic treatment significantly disturbed the adhesion behavior of microorganisms like Pseudoalteromonas on the gel-like marine epoxy primer, which provided an effective approach for controlling marine biofouling. [ABSTRACT FROM AUTHOR]

The floatability of fluorite and calcite exhibit similar properties, rendering their flotation separation challenging. Macromolecular polysaccharide reagents containing the polyhydroxyl group have shown broad promising application. The selectivity of polysaccharide is relatively low. In this study, the introduction of Fe3+ was employed to enhance the selective adsorption capacity of Pullulan polysaccharide towards fluorite and calcite minerals, thereby achieving effective flotation separation. Furthermore, the mechanism underlying intramolecular interactions was elucidated. The DFT calculation and XPS analysis revealed that the adsorption of Fe3+ on the calcite surface was more favorable, leading to the formation of a Ca-O-Fe structure. The MD simulation, XPS analysis, and Zeta potential analysis revealed that the Fe-OH groups on the surface of calcite reacted with the -OH groups in Pullulan and formed bonds, resulting in the formation of a Calcite-Fe-Pullulan structure. This facilitated the attachment of a significant number of Pullulan molecules to the calcite surface. The formation of a hydrophilic layer on the outer surface of calcite by Pullulan, in contrast to the absence of such layer on fluorite's surface, results in an increased disparity in surface floatability between these two minerals, thereby enhancing the efficiency of flotation separation. [ABSTRACT FROM AUTHOR]

The ionic association of Alcian Blue dye with poly(styrene sulfonate) in aqueous solutions was studied for analytical purposes. The quadruple-charged cationic dye, Alcian Blue, was found to form colloidal ionic associates with poly(styrene sulfonate) anions. When the amounts of opposite charges are nearly equal, the resulting ionic associates lose solubility and coagulate rapidly. This effect occurs within a narrow range of the ratio of poly(styrene sulfonate) to Alcian Blue. At the point of charge equivalence, the zeta potential of the resulting particles is zero, which facilitates flocculation. The resulting flocs enlarge to approximately 0.05–0.5 mm and precipitate rapidly. FTIR spectroscopy confirms that the precipitate contains both poly(styrene sulfonate) and Alcian Blue dye. Sedimentation kinetics was studied in detail using scanning turbidimetry. Due to the high molar absorbance of the Alcian Blue dye at 600 nm, the point of equimolar charge ratio was precisely determined by spectrophotometry. The complete precipitation of ionic associates occurs when the amount of poly(styrene sulfonate) ranges from 1.4 to 1.55 mmol per 1 g of Alcian Blue dye. Such a narrow coagulation range allows for the use of the studied effect for quantitative analysis. Both Alcian Blue dye and poly(styrene sulfonate) can be quantified if one of their concentrations is known. [ABSTRACT FROM AUTHOR]

The interfacial dilational rheology of silica nanoparticles (NPs) directly reflects the relationship between surface structure and interfacial behaviors in NPs, which has attracted significant attention in various industrial fields. In this work, modified silica nanoparticles (MNPs) with various alkyl chain lengths were synthesized and systematically characterized using Fourier transform infrared spectra, Zeta potential, and water contact angle measurements. It was found that the MNPs were successfully fabricated with similar degrees of modification. Subsequently, the interfacial behaviors of the MNPs in an n-octane/water system were investigated through interfacial dilational rheological experiments. The length of the modified alkyl chain dominated the hydrophilic–lipophile balance and the interfacial activity of the MNPs, evaluated by the equilibrium interfacial tension (IFT) variation and dilational elasticity modulus. In the large amplitude compression experiment, the balance between the electrostatic repulsion and interfacial activity in the MNPs was responsible for their ordered interfacial arrangement. The MNPs with the hexyl alkyl chain (M6C) presented the optimal amphipathy and could partly overcome the repulsion, causing a dramatic change in surface pressure. This was further confirmed by the variations in IFT and dilational elasticity during the compression path. The study provides novel insights into the interfacial rheology and interactions of functionally modified NPs. [ABSTRACT FROM AUTHOR]

The toxicity of silver nanoparticles (AgNPs) depends on their physicochemical properties. The ongoing research aims to develop effective methods for modifying AgNPs using molecules that enable control over the processes induced by nanoparticles in both normal and cancerous cells. Application of amino acid-stabilized nanoparticles appears promising, exhibiting tunable electrokinetic properties. Therefore, this study focused on determining the influence of the surface charge of cysteine (CYS)-stabilized AgNPs on their toxicity towards human normal B (COLO-720L) and T (HUT-78) lymphocyte cell lines. CYS-AgNPs were synthesized via the chemical reduction. Transmission electron microcopy (TEM) imaging revealed that they exhibited a quasi-spherical shape with an average size of 18 ± 3 nm. CYS-AgNPs remained stable under mild acidic (pH 4.0) and alkaline (7.4 and 9.0) conditions, with an isoelectric point observed at pH 5.1. Following a 24 h treatment of lymphocytes with CYS-AgNPs, concentration-dependent alterations in cell morphology were observed. Positively charged CYS-AgNPs notably decreased lymphocyte viability. Furthermore, they exhibited grater genotoxicity and more pronounced disruption of biological membranes compared to negatively charged CYZ-AgNPs. Despite both types of AgNPs interacting similarly with fetal bovine serum (FBS) and showing comparable profiles of silver ion release, the biological assays consistently revealed that the positively charged CYS-AgNPs exerted stronger effects at all investigated cellular levels. Although both types of CYS-AgNPs have the same chemical structure in their stabilizing layers, the pH-induced alterations in their surface charge significantly affect their biological activity. [ABSTRACT FROM AUTHOR]

This article presents a new method for preparing multifunctional composite biomaterials with applications in advanced biomedical fields. The biomaterials consist of dicalcium phosphate (DCPD) and bioactive silicate glasses (SiO2/Na2O and SiO2/K2O), containing the antibiotic streptomycin sulfate. Materials were deeply characterized by X-ray diffraction and attenuated total reflectance Fourier transform infrared spectroscopy, and zeta potential analysis, UV–visible spectrophotometry, and ion-exchange measurement were applied in a simulating body fluid (SBF) solution. The main results include an in situ chemical transformation of dicalcium phosphate into an apatitic phase under the influence of silicate solutions and the incorporation of the antibiotic. The zeta potential showed a decrease in surface charge from ζ = −24.6 mV to ζ = −16.5 mV. In addition, a controlled and prolonged release of antibiotics was observed over a period of 37 days, with a released concentration of up to 755 ppm. Toxicity tests in mice demonstrated good tolerance of the biomaterials, with no significant adverse effects. Moreover, these biomaterials have shown potent antibacterial activity against various bacterial strains, including Listeria monocytogenes, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, suggesting their potential use in tissue engineering, drug delivery, and orthopedic and dental implants. By integrating the antibiotic into the biomaterial composites, we achieved controlled release and prolonged antibacterial efficacy. This research contributes to advancing biomaterials by exploring innovative synthetic routes and showcasing their promise in regenerative medicine and controlled drug delivery. [ABSTRACT FROM AUTHOR]

Medicinal plant-derived vesicle-like nanoparticles can carry chemical components and exert intercellular activity due to the encapsulation of nanostructures. American ginseng is well known as a traditional herb and is commonly used in clinical decoctions. However, the nano-characteristics and chemical composition of American-ginseng-derived vesicle-like nanoparticles (AGVNs) in decoctions are unclear. In this study, the gradient centrifugation method was used to extract and isolate AGVNs. A metabolomic method based on high-resolution mass spectrometry was established to analyze small molecules loaded in AGVNs. Zebrafish and RAW264.7 cells were employed to investigate the anti-inflammatory effects of AGVNs. The results showed that the particle size of AGVNs was generally 243.6 nm, and the zeta potential was −14.5 mV. AGVNs were found to contain 26 ginsenosides (14 protopanaxadiols, 11 protopanaxatriols, and 1 oleanolic acid). Ginsenoside Rb1 and malonyl-ginsenoside Rb1 tended to be enriched in AGVNs. Moreover, AGVNs were found to exert anti-inflammatory effects by reducing macrophage migration in zebrafish and regulating inflammatory factor (NO, TNF-α, IL-6, IL-10) secretion in RAW 264.7 cells. The characterization and analysis of AGVNs provide references and data that support the development of nanoscale anti-inflammatory substances from medicinal plants. [ABSTRACT FROM AUTHOR]

Human serum albumin (HSA) corona formation on polymer microparticles of a spheroidal shape was studied using dynamic light scattering and Laser Doppler Velocimetry (LDV). Physicochemical characteristics of the albumin comprising the zeta potential and the isoelectric point were determined as a function of pH for various ionic strengths. Analogous characteristics of the polymer particles were analyzed. The adsorption of albumin on the particles was in situ monitored by LDV. The stability of the HSA-functionalized particle suspensions under various pHs and their electrokinetic properties were also determined. The deposition kinetics of the particles on mica, silica and gold sensors were investigated by optical microscopy, AFM and quartz microbalance (QCM) under diffusion and flow conditions. The obtained results were interpreted in terms of the random sequential adsorption model that allowed to estimate the range of applicability of QCM for determining the deposition kinetics of viruses and bacteria at abiotic surfaces. [ABSTRACT FROM AUTHOR]

In this study, a new polyionic polymer inhibitor, TIL-NH2, was developed to address the instability of shale gas horizontal wells caused by water-based drilling fluids. The structural characteristics and inhibition effects of TIL-NH2 on mud shale were comprehensively analyzed using infrared spectroscopy, NMR spectroscopy, contact angle measurements, particle size distribution, zeta potential, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The results demonstrated that TIL-NH2 significantly enhances the thermal stability of shale, with a decomposition temperature exceeding 300 °C, indicating excellent high-temperature resistance. At a concentration of 0.9%, TIL-NH2 increased the median particle size of shale powder from 5.2871 μm to over 320 μm, effectively inhibiting hydration expansion and dispersion. The zeta potential measurements showed a reduction in the absolute value of illite's zeta potential from −38.2 mV to 22.1 mV at 0.6% concentration, highlighting a significant decrease in surface charge density. Infrared spectroscopy and X-ray diffraction confirmed the formation of a close adsorption layer between TIL-NH2 and the illite surface through electrostatic and hydrogen bonding, which reduced the weakly bound water content to 0.0951% and maintained layer spacing of 1.032 nm and 1.354 nm in dry and wet states, respectively. Thermogravimetric analysis indicated a marked reduction in heat loss, particularly in the strongly bound water content. Scanning electron microscopy revealed that shale powder treated with TIL-NH2 exhibited an irregular bulk shape with strong inter-particle bonding and low hydration degree. These findings suggest that TIL-NH2 effectively inhibits hydration swelling and dispersion of shale through the synergistic effects of cationic imidazole rings and primary amine groups, offering excellent temperature and salt resistance. This provides a technical foundation for the low-cost and efficient extraction of shale gas in horizontal wells. [ABSTRACT FROM AUTHOR]

Caffeic acid (CA), a hydrophobic polyphenol with various pharmacological activities, exhibits a low aqueous solubility and sensitivity to light. In order to improve its chemical properties and overcome the limits in its application, the compound was loaded in P123 micelles (MCs) prepared using two polymer concentrations (10 and 20% w/w, MC10 and MC20). The micelles were characterised in terms of the size distribution, zeta potential, drug encapsulation efficiency, rheology, and cumulative drug release. Micellar formulations exhibited sizes in the range of 11.70 and 17.70 nm and a good polydispersion, indicating the formation of relatively small-sized micelles, which is favourable for drug delivery applications. Additionally, the stability and antioxidant profiles of the free CA and the CA loaded in micelles were studied. The results obtained on the free CA showed the formation of photodegradation products endowed with higher DPPH scavenging activity with respect to the pure compound. Instead, it was found that the incorporation of CA into the micelles significantly increased its solubility and decreased the photodegradation rate. Overall, the results indicate the successful formation of P123 micelles loaded with CA, with promising characteristics such as a small size, good encapsulation efficiency, sustained release profile, and improved light stability. These findings suggest the potentiality of these micelles as a delivery system for CA, thus enhancing its bioavailability. [ABSTRACT FROM AUTHOR]

Astaxanthin has 550 times more antioxidant activity than vitamin E, so it can scavenge free radicals in vivo and improve body immunity. However, the poor stability of astaxanthin becomes a bottleneck problem that limits its application. Herein, Haematococcus pluvialis (H. pluvialis) as a raw material was used to extract astaxanthin, and the optimal extraction conditions included the extraction solvent (EA:EtOH = 1:6, v/v), extraction temperature (60 °C), and extraction time (70 min). The extracted astaxanthin was then loaded using lecithin to form corresponding liposomes via the ethanol injection method. The results showed that the particle size and zeta potential of the prepared liposomes were 105.8 ± 1.2 nm and −38.0 ± 1.7 mV, respectively, and the encapsulation efficiency of astaxanthin in liposomes was 88.83%. More importantly, the stability of astaxanthin was significantly improved after being embedded in the prepared liposomes. [ABSTRACT FROM AUTHOR]

Microemulsions are thermodynamically stable, optically isotropic, transparent, or semi-transparent mixed solutions composed of two immiscible solvents stabilized by amphiphilic solutes. This comprehensive review explores state-of-the-art techniques for characterizing microemulsions, which are versatile solutions essential across various industries, such as pharmaceuticals, food, and petroleum. This article delves into spectroscopic methods, nuclear magnetic resonance, small-angle scattering, dynamic light scattering, conductometry, zeta potential analysis, cryo-electron microscopy, refractive index measurement, and differential scanning calorimetry, examining each technique's strengths, limitations, and potential applications. Emphasizing the necessity of a multi-technique approach for a thorough understanding, it underscores the importance of integrating diverse analytical methods to unravel microemulsion structures from molecular to macroscopic scales. This synthesis provides a roadmap for researchers and practitioners, fostering advancements in microemulsion science and its wide-ranging industrial applications. [ABSTRACT FROM AUTHOR]

This research aimed to encapsulate the Capparis spinosa fruit extract to increase its stability for incorporation into food products such as jelly or jelly powder. After extraction, the nanoliposomes containing the extract were prepared in ratios of 60-0, 50-10, 40-20, and 30-30 lecithin-to-cholesterol. The effects of lecithin-to-cholesterol concentrations on the related parameters were then evaluated. The results showed that the average particle size was in the range of 95.05 to 164.25 nm, and with an increasing cholesterol concentration, the particle size of the nanoliposomes increased. The addition of cholesterol increased the zeta potential from −60.40 to −68.55 millivolt. Furthermore, cholesterol led to an increase in encapsulation efficiency, and even improved the stability of phenolic compounds loaded in nanoliposomes during storage time. Fourier transform infrared (FTIR) spectroscopy confirmed the successful loading of the extract. Field emission scanning electron microscopy (FE-SEM) analysis revealed nano-sized spherical and almost-elliptical liposomes. For jelly powders, the water solubility index ranged from 39.5 to 43.7% (p > 0.05), and the hygroscopicity values ranged between 1.22 and 9.36 g/100 g (p < 0.05). In conclusion, nanoencapsulated Capparis spinosa extract displayed improved stability and can be used in jelly preparation without any challenge or unfavorable perception. [ABSTRACT FROM AUTHOR]

Dispersions of amino-functionalized silica in ethylene glycol (EG) and in aqueous glycol show excellent stability at room temperature. Stability at elevated temperatures would be much desired with respect to their potential application as heat-transfer fluids. Amino-functionalized silica was dispersed in EG and in 50–50 aqueous EG by mass. HCl and acetic acid were added to enhance the positive ζ potential. The dispersions were stored at 40, 60, 80, and 100 °C for up to 28 days, and ζ potential and apparent particle radius were studied as a function of elapsed time. The particles showed a positive ζ potential in excess of 40 mV (Smoluchowski), which remained unchanged for 28 days. Such a high absolute value of ζ potential is sufficient to stabilize the dispersion against flocculation and sedimentation. The apparent particle radius in acidified dispersions was about 70 nm, and it was stable for 28 days. The particles were larger in pH-neutral dispersions. The apparent particle radius was about 80 nm in fresh dispersions and it increased on long storage at 80 and 100 °C. [ABSTRACT FROM AUTHOR]

Drilling through shale formations can be expensive and time-consuming due to the instability of the wellbore. Further, there is a need to develop inhibitors that are environmentally friendly. Our study discovered a cost-effective solution to this problem using Gum Arabic (ArG). We evaluated the inhibition potential of an ArG clay swelling inhibitor and fluid loss controller in water-based mud (WBM) by conducting a linear swelling test, capillary suction timer test, and zeta potential, fluid loss, and rheology tests. Our results displayed a significant reduction in linear swelling of bentonite clay (Na-Ben) by up to 36.1% at a concentration of 1.0 wt. % ArG. The capillary suction timer (CST) showed that capillary suction time also increased with the increase in the concentration of ArG, which indicates the fluid-loss-controlling potential of ArG. Adding ArG to the drilling mud prominently decreased fluid loss by up to 50%. Further, ArG reduced the shear stresses of the base mud, showing its inhibition and friction-reducing effect. These findings suggest that ArG is a strong candidate for an alternate green swelling inhibitor and fluid loss controller in WBM. Introducing this new green additive could significantly reduce non-productive time and costs associated with wellbore instability while drilling. Further, a dynamic linear swelling model, based on machine learning (ML), was created to forecast the linear swelling capacity of clay samples treated with ArG. The ML model proposed demonstrates exceptional accuracy (R2 score = 0.998 on testing) in predicting the swelling properties of ArG in drilling mud. [ABSTRACT FROM AUTHOR]

Zeta potential refers to the electrokinetic potential present in colloidal systems, exerting significant influence on the diverse properties of nano-drug delivery systems. The impact of the dielectric constant on the zeta potential and charge inversion of highly charged colloidal particles immersed in a variety of solvents spanning from polar, such as water, to nonpolar solvents and in the presence of multivalent salts was investigated through primitive Monte Carlo (MC) model simulations. Zeta potential, ξ , is decreased with the decreasing dielectric constant of the solvent and upon further increase in the salinity and the valency of the salt. At elevated levels of salt, the colloidal particles become overcharged in all solvents. As a result, their apparent charge becomes opposite in sign to the stoichiometric charge. This reversal of charge intensifies until reaching a saturation point with further increase in salinity. [ABSTRACT FROM AUTHOR]

This work aims to demonstrate that the Fe2O3 nanocrystals' adsorptive and photocatalytic properties can be adjusted by exposing the crystal facets that are functionalized. To this end, cube- and disc-like structures were synthesized using a metal ion-mediated hydrothermal route. Thereafter, some of the samples were annealed at 500 °C for 3 h. Our paper combines the experimental part with theoretical calculations of the obtained materials' band edge positions. The results reveal that—aside from hematite—the as-synthesized discs also contain γ-FeOOH and β-Fe2O3 phases, which transform into α-Fe2O3 during annealing. The hydrodynamic diameter, zeta potential, and adsorption kinetics measurements show that the cube-like samples exhibit the highest affinity for cationic, whereas the discs have an affinity for anionic dye. Measurements of the wall zeta potential also reveal that annealing the discs modifies their surface state and ability to adsorb molecules. Photocatalytic tests show that the as-synthesized powders have better photocatalytic performance toward methylene blue decomposition than the annealed ones. The observed small changes in the concentration of the MO during illumination result from the energy band structure of the cube-like crystal orientation. [ABSTRACT FROM AUTHOR]

In this study, we developed a green and multifunctional bioactive nanoemulsion (BBG-NEs) of Blumea balsamifera oil using Bletilla striata polysaccharide (BSP) and glycyrrhizic acid (GA) as natural emulsifiers. The process parameters were optimized using particle size, PDI, and zeta potential as evaluation parameters. The physicochemical properties, stability, transdermal properties, and bioactivities of the BBG-NEs under optimal operating conditions were investigated. Finally, network pharmacology and molecular docking were used to elucidate the potential molecular mechanism underlying its wound-healing properties. After parameter optimization, BBG-NEs exhibited excellent stability and demonstrated favorable in vitro transdermal properties. Furthermore, it displayed enhanced antioxidant and wound-healing effects. SD rats wound-healing experiments demonstrated improved scab formation and accelerated healing in the BBG-NE treatment relative to BBO and emulsifier groups. Pharmacological network analyses showed that AKT1, CXCL8, and EGFR may be key targets of BBG-NEs in wound repair. The results of a scratch assay and Western blotting assay also demonstrated that BBG-NEs could effectively promote cell migration and inhibit inflammatory responses. These results indicate the potential of the developed BBG-NEs for antioxidant and skin wound applications, expanding the utility of natural emulsifiers. Meanwhile, this study provided a preliminary explanation of the potential mechanism of BBG-NEs to promote wound healing through network pharmacology and molecular docking, which provided a basis for the mechanistic study of green multifunctional nanoemulsions. [ABSTRACT FROM AUTHOR]

Bacterial infection is a thorny problem, and it is of great significance to developing green and efficient biological antibacterial agents that can replace antibiotics. This study aimed to rapidly prepare a new type of green antibacterial nanoemulsion containing silver nanoparticles in one step by using Blumea balsamifera oil (BBO) as an oil phase and tea saponin (TS) as a natural emulsifier and reducing agent. The optimum preparation conditions of the AgNPs@BBO-TS NE were determined, as well as its physicochemical properties and antibacterial activity in vitro being investigated. The results showed that the average particle size of the AgNPs@BBO-TS NE was 249.47 ± 6.23 nm, the PDI was 0.239 ± 0.003, and the zeta potential was −35.82 ± 4.26 mV. The produced AgNPs@BBO-TS NE showed good stability after centrifugation and 30-day storage. Moreover, the AgNPs@BBO-TS NE had an excellent antimicrobial effect on Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. These results demonstrated that the AgNPs@BBO-TS NE produced in this study can be used as an efficient and green antibacterial agent in the biomedical field. [ABSTRACT FROM AUTHOR]

Astaxanthin was encapsulated in liposomes by a thin layer dispersion and ultrasound method using soybean phospholipid. The digestion properties of liposomes for encapsulating astaxanthin were investigated in light of particle size, size distribution, zeta potential, and microstructure during in vitro digestion as a function of time. These results exhibited that the average particle size increased gradually with liposomal vesicles retained round shapes and a fairly uniform distribution after passage through the simulated gastric fluid digestion. The result revealed that astaxanthin-loaded liposomes were stable in low pH conditions. It was also found that the mixed micelles formed in a simulated intestinal fluid. The zeta potential of astaxanthin-loaded liposomes had a decrease in negativity after digestion. In comparison with free astaxanthin, there was an appreciable increase in the bioaccessibility of astaxanthin after encapsulation in liposomes. This enhancement can be attributed to more soluble astaxanthin in the mixed micelles for astaxanthin-loaded liposomes. It indicated that the barrier of the liposomal bilayer could inhibit astaxanthin fading and leaking after encapsulation in liposomes. These results provide useful information for designing more stable delivery systems in the gastrointestinal tract and improving the bioaccessibility of lipophilic nutraceuticals. [ABSTRACT FROM AUTHOR]

Metformin (MET), an antidiabetic drug, is emerging as a promising anticancer agent. This study was initiated to investigate the antitumor effects and potential molecular targets of MET in mice bearing solid Ehrlich carcinoma (SEC) as a model of breast cancer (BC) and to explore the potential of zein nanoparticles (ZNs) as a carrier for improving the anticancer effect of MET. ZNs were fabricated through ethanol injection followed by probe sonication method. The optimum ZN formulation (ZN8) was spherical and contained 5 mg zein and 30 mg sodium deoxycholate with a small particle size and high entrapment efficiency percentage and zeta potential. A stability study showed that ZN8 was stable for up to three months. In vitro release profiles proved the sustained effect of ZN8 compared to the MET solution. Treatment of SEC-bearing mice with ZN8 produced a more pronounced anticancer effect which was mediated by upregulation of P53 and miRNA-543 as well as downregulation of NF-κB and miRNA-191-5p gene expression. Furthermore, ZN8 produced a marked elevation in pAMPK and caspase-3 levels as well as a significant decrease in cyclin D1, COX-2, and PGE2 levels. The acquired findings verified the potency of MET-loaded ZNs as a treatment approach for BC. [ABSTRACT FROM AUTHOR]

In this study, a new composite, tetraethylenepentamine (TEPA), was incorporated into amino terephthalic acid-modified activated carbon (ATA@AC) through a one-pot integration of TEPA with the COOH moiety of ATA@AC. This process resulted in the creation of a TEPA@ATA@AC composite for Pb(II) removal from an aquatic environment. Several techniques, including SEM, EDX, FT-IR, TGA, XRD, and Zeta potential, were employed to emphasize the chemical composition, morphology, and thermal durability of the as-synthesized TEPA@ATA@AC composite. The impact of experimental variables on the adsorption of Pb(II) ions was studied using batch adsorption. The uptake assessment suggested that the TEPA@ATA@AC composite exhibited superior Pb(II) removal performance with high removal efficiency (97.65%) at pH = 6.5, dosage = 0.02 g, equilibrium time = 300 min, and temperature = 298 K. The isotherm data exhibited good conformity with the Langmuir isotherm model, whereas the kinetics data displayed strong agreement with both pseudo-first-order and pseudo-second-order kinetics models. This reflected that the Pb((II) uptake by the TEPA@ATA@AC composite was caused by physisorption coupled with limited chemisorption. The greatest monolayer uptake capacity of the TEPA@ATA@AC composite was 432.8 mg/g. The thermodynamic findings indicated that the Pb(II) uptake on the TEPA@ATA@AC composite was an exothermic and feasible process. After five adsorption—desorption runs, the TEPA@ATA@AC composite maintained a superior uptake capacity (83.80%). In summary, the TEPA@ATA@AC composite shows promise as a potent adsorbent for effectively removing Cr(VI) from contaminated water, with impressive removal efficiency. [ABSTRACT FROM AUTHOR]

The Fe3O4@SiO2@ZnO composite was synthesized via the simultaneous deposition of SiO2 and ZnO onto pre-prepared Fe3O4 nanoparticles. Physicochemical methods (TEM, EDXS, XRD, SEM, FTIR, PL, zeta potential measurements, and low-temperature nitrogen adsorption/desorption) revealed that the simultaneous deposition onto magnetite surfaces, up to 18 nm in size, results in the formation of an amorphous shell composed of a mixture of zinc and silicon oxides. This composite underwent modification to form Fe3O4@SiO2@ZnO*, achieved by activation with H2O2. The modified composite retained its structural integrity, but its surface groups underwent significant changes, exhibiting pronounced catalytic activity in the photodegradation of methyl orange under UV irradiation. It was capable of degrading 96% of this azo dye in 240 min, compared to the initial Fe3O4@SiO2@ZnO composite, which could remove only 11% under identical conditions. Fe3O4@SiO2@ZnO* demonstrated robust stability after three cycles of use in dye photodegradation. Furthermore, Fe3O4@SiO2@ZnO* exhibited decreased PL intensity, indicating an enhanced efficiency in electron-hole pair separation and a reduced recombination rate in the modified composite. The activation process diminishes the electron-hole (e−)/(h+) recombination and generates the potent oxidizing species, hydroxyl radicals (OH˙), on the photocatalyst surface, thereby playing a crucial role in the enhanced photodegradation efficiency of methyl orange with Fe3O4@SiO2@ZnO*. [ABSTRACT FROM AUTHOR]

Dental caries (DC) is the most common oral pathology. The main bacteria responsible for DC is Streptococcus mutans. One of the strategies that can decrease or eliminate the risk of DC development is using compounds that will inhibit both the growth and virulence factors of S. mutans. Tannins are plant polyphenols that have strong antibacterial activity. The purpose of this study was to assess the antibacterial activity of three tannins against S. mutans. In this investigation, microbiological tests (MIC and MBC) and physicochemical techniques like the fluorescence measurements of tannins' interaction with S. mutans cell membrane and membrane proteins, zeta potential, and thermodynamic analyses were used to obtain knowledge about the antibacterial potential of the investigated compounds against S. mutans as well as about the mechanisms associated with antibacterial activity. The obtained results demonstrate that the used compounds exhibit high antibacterial activity against S. mutans. The mechanisms of their antibacterial activity are linked to the strong change in the S. mutans membrane fluidity and potential, and to their interaction with membrane proteins that can result in great disturbance of bacterial physiology and ultimately the inhibition of bacterial growth, triggering their death. Therefore, it can be concluded that the investigated compounds can be potentially used as natural factors in the prevention of dental caries. [ABSTRACT FROM AUTHOR]

This study synthesized (3-aminopropyl)triethoxysilane-functionalized porous silica (AP@MPS) to adsorb aqueous uranium (U(VI)). To comprehensively analyze the surface properties of the AP@MPS materials, a combination of SEM, BET, XPS, NMR, and zeta potential tests were conducted. The adsorption experiments for U(VI) revealed the rapid and efficient adsorption capacity of AP@MPS, with the solution condition of a constant solution pH = 6.5, an initial U(VI) concentration of 600 mg × L−1, a maximum U(VI) capacity of AP@MPS reaching 381.44 mg-U per gram of adsorbent, and a removal rate = 63.6%. Among the four types of AP@MPS with different average pore sizes tested, the one with an average pore size of 2.7 nm exhibited the highest U(VI) capacity, particularly at a pH of 6.5. The adsorption data exhibited a strong fit with the Langmuir model, and the calculated adsorption energy aligned closely with the findings from the Potential of Mean Force (PMF) analysis. The outcomes obtained using the Surface Complex Formation Model (SCFM) highlight the dominance of the coulombic force ΔG0coul as the principal component of the adsorption energy (ΔG0ads). This work garnered insights into the adsorption mechanism by meticulously examining the ΔG0ads across a pH ranging from 4 to 8. In essence, this study's findings furnish crucial insights for the future design of analogous adsorbents, thereby advancing the realm of uranium(VI) removal methodologies. [ABSTRACT FROM AUTHOR]

Tissue engineering is an interdisciplinary field of science that has been developing very intensively over the last dozen or so years. New ways of treating damaged tissues and organs are constantly being sought. A variety of porous structures are currently being investigated to support cell adhesion, differentiation, and proliferation. The selection of an appropriate biomaterial on which a patient's new tissue will develop is one of the key issues when designing a modern tissue scaffold and the associated treatment process. Among the numerous groups of biomaterials used to produce three-dimensional structures, hydroxyapatite (HA) deserves special attention. The aim of this paper was to discuss changes in the double electrical layer in hydroxyapatite with an incorporated boron and strontium/electrolyte solution interface. The adsorbents were prepared via dry and wet precipitation and low-temperature nitrogen adsorption and desorption methods. The specific surface area was characterized, and the surface charge density and zeta potential were discussed. [ABSTRACT FROM AUTHOR]

The adsorption of divalent ions on metal oxides is controlled by the pH of a solution. It is commonly assumed that this is a reversible process for pH changes. However, there are reports that the sorption of ions on oxides may not be reversible. To verify this, we used potentiometric titration, ion-selective electrodes (ISEs), and electrokinetic measurements to examine the reversibility of the adsorption of hydrogen ions and three metal ions (Ca2+, Cu2+, and Fe2+) on TiO2. The ferrous ion was used as a reference because its adsorption is entirely irreversible. The surface charge determined by potentiometric titration and the adsorption edges measured using ISE indicate that the adsorption of copper ions is reversible with changes in pH. In the case of calcium ions, the results suggest a certain degree of irreversibility. There are apparent differences in the electrokinetic potential data obtained during titration with base and acid, which suggests that the adsorption is irreversible. We have explained this contradiction by considering the complex and dynamic nature of electrophoretic mobility. In our opinion, potentiometric titration may be the simplest and most reliable method for assessing the reversibility of multivalent ion adsorption. [ABSTRACT FROM AUTHOR]

Red guava, distinguished by its elevated lycopene content, emerges as a promising natural source of carotenoids. This study systematically evaluates the impact of diverse processing techniques on the efficient release of carotenoids. The primary objective is to facilitate the transfer of carotenoids into the juice fraction, yielding carotenoid-enriched juice seamlessly integrable into aqueous-based food matrices. The untreated guava puree exhibited a modest release of carotenoids, with only 66.26% of β-carotene and 57.08% of lycopene reaching the juice. Contrastly, both high-pressure homogenization (HPH) at 25 MPa and enzyme (EM) treatment significantly enhanced carotenoid release efficiency (p < 0.05), while high hydrostatic pressure (HHP) at 400 MPa and pulsed electric field (PEF) of 4 kV/cm did not (p > 0.05). Notably, HPH demonstrated the most substantial release effect, with β-carotene and lycopene reaching 90.78% and 73.85%, respectively. However, the stability of EM-treated samples was relatively poor, evident in a zeta-potential value of −6.51 mV observed in the juice. Correlation analysis highlighted the interactions between pectin and carotenoids likely a key factor influencing the stable dissolution or dispersion of carotenoids in the aqueous phase. The findings underscore HPH as a potent tool for obtaining carotenoid-enriched guava juice, positioning it as a desirable ingredient for clean-label foods. [ABSTRACT FROM AUTHOR]

The interactions between poly(acrylic acid) (PAA), poly(vinyl alcohol) (PVA), and lysozyme (Lys) in an aqueous environment at pHs of 2, 4, and 7.4 were discussed considering the experimental data obtained by turbidimetry, electrokinetic and rheological measurements, and FTIR analysis. It was found that the increase in PAA amount reduces the coacervation zone by shifting the critical pHcr1to higher values while the critical pHcr2 remains unchanged. The coacervation zone extended from 3.1–4.2 to 2.9–4.7 increasing the Lys concentration from 0.2% to 0.5%. The zeta potential measurements showed that the PAA–PVA–Lys mixture in water is the most stable in the pH range of 4.5–8. Zero shear viscosity exhibited deviations from additivity at both investigated pHs, and a maximum value corresponding to a maximum hydrodynamic volume was revealed at PAA weight fractions of 0.4 and 0.5 for pHs of 4 and 7.4, respectively. The binding affinity to Lys of PAA, established by molecular dynamics simulation, was slightly higher than that of PVA. The more stable complex was PAA–Lys formed in a very acidic environment; for that, a binding affinity of −7.1 kcal/mol was determined. [ABSTRACT FROM AUTHOR]

Soybean meal (SBM) is a high-quality vegetable protein, whose application is greatly limited due to its high molecular weight and anti-nutritional properties. The aim of this study was to modify the protein of soybean meal via solid-state fermentation of Bacillus subtilis. The fermentation conditions were optimized as, finally, the best process parameters were obtained, namely fermentation temperature of 37 °C, inoculum amount of 12%, time of 47 h, and material-liquid ratio of 1:0.58, which improved the content of acid-soluble protein. To explore the utilization of modified SBM as a food ingredient, the protein structure and properties were investigated. Compared to SBM, the protein secondary structure of fermented soybean meal (FSBM) from the optimal process decreased by 8.3% for α-helix content, increased by 3.08% for β-sheet, increased by 2.71% for β-turn, and increased by 2.51% for random coil. SDS-PAGE patterns showed that its 25–250 KDa bands appeared to be significantly attenuated, with multiple newborn peptide bands smaller than 25 KDa. The analysis of particle size and zeta potential showed that fermentation reduced the average particle size and increased the absolute value of zeta potential. It was visualized by SEM and CLSM maps that the macromolecular proteins in FSBM were broken down into fragmented pieces with a folded and porous surface structure. Fermentation increased the solubility, decreased the hydrophobicity, increased the free sulfhydryl content, decreased the antigenicity, improved the protein properties of SBM, and promoted further processing and production of FSBM as a food ingredient. [ABSTRACT FROM AUTHOR]

The goal of the current study was to explore the potential benefits of Tretinoin (Tre) fatty acid vesicles (Tre-FAV) as a prospective antipsoriatic topical delivery system. This promising system can counteract the drug challenges in terms of its extremely low aqueous solubility, instability, skin irritation, and serious systemic adverse effects. Tre-loaded fatty acid vesicles were successfully developed and entirely characterised. The selected formulation was investigated for in vitro release, ex vivo skin retention and psoriasis efficacy studies. The characterisation results of Tre-FAV showed it has a globular shape with a particle size of 126.37 ± 1.290 nm (0.188 ± 0.019 PDI). The entrapment efficiency and zeta potential were discovered to be 84.26 ± 0.816% and −28.9 ± 1.92 mV, respectively. Encapsulation of the drug in the fatty acid vesicles was also strengthened by differential scanning calorimetric and powder FTIR diffraction studies. In vitro release results showed that Tre-FAV significantly increased skin absorption and retention in comparison to the Tre solution. The topical application of Tre-FAV to a mouse model confirmed that it has superior in vivo antipsoriatic properties in terms of well-demarcated papules, erythema and reduced epidermal thickness in comparison to other treatments. The weight of the spleen and the levels of the cytokines IL-17 and IL-6 decreased after treatment. In conclusion, FAV dramatically increased the water solubility and skin permeability of Tre and its anti-psoriasis activity. [ABSTRACT FROM AUTHOR]

Increasing antimicrobial resistance to the action of existing antibiotics has prompted researchers to identify new natural molecules with antimicrobial potential. In this study, a green system was developed for biosynthesizing gold nanoparticles (BAuNPs) using sage (Salvia officinalis L.) leaf extract bioconjugated with non-toxic, eco-friendly, and biodegradable chitosan, forming chitosan/gold bioconjugates (Chi/BAuNPs). Characterization of the BAuNPs and Chi/BAuNPs conjugates takes place using transmission electron microscopy (TEM), X-ray spectra, Fourier transform infrared (FT-IR) spectroscopy, and zeta potential (Z-potential). The chemical composition of S. officinalis extract was evaluated via gas chromatography/mass spectrometry (GC/MS). This study evaluated the antioxidant and antimicrobial activities of human pathogenic multidrug-resistant (MDR) and multisensitive (MS) bacterial isolates using the agar diffusion method. Chi/BAuNPs showed inhibition of the MDR strains more effectively than BAuNPs alone as compared with a positive standard antibiotic. The cytotoxicity assay revealed that the human breast adenocarcinoma cancer cells (MCF7) were more sensitive toward the toxicity of 5-Fu + BAuNPs and 5-Fu + Chi/BAuNPs composites compared to non-malignant human fibroblast cells (HFs). The study shows that BAuNPs and Chi/BAuNPs, combined with 5-FU NPs, can effectively treat cancer at concentrations where the free chemical drug (5-Fu) is ineffective, with a noted reduction in the required dosage for noticeable antitumor action. [ABSTRACT FROM AUTHOR]

Solid lipid nanoparticles (SLNs) have the advantages of a cell-specific delivery and sustained release of hydrophobic drugs that can be exploited against infectious diseases. The topical delivery of hydrophobic drugs needs pharmaceutical strategies to enhance drug permeation, which is a challenge faced by conventional formulations containing a drug suspended in gel, creams or ointments. We report the fabrication and optimization of SLNs with sulconazole (SCZ) as a model hydrophobic drug and then a formulation of an SLN-based topical gel against fungal infections. The SLNs were optimized through excipients of glyceryl monostearate and Phospholipon® 90 H as lipids and tween 20 as a surfactant for its size, drug entrapment and sustained release and resistance against aggregation. The SCZ-SLNs were physically characterized for their particle size (89.81 ± 2.64), polydispersity index (0.311 ± 0.07), zeta potential (−26.98 ± 1.19) and encapsulation efficiency (86.52 ± 0.53). The SCZ-SLNs showed sustained release of 85.29% drug at the 12 h timepoint. The TEM results demonstrated spherical morphology, while DSC, XRD and FTIR showed the compatibility of the drug inside SLNs. SCZ-SLNs were incorporated into a gel using carbopol and were further optimized for their rheological behavior, pH, homogeneity and spreadability on the skin. The antifungal activity against Candida albicans and Trichophyton rubrum was increased in comparison to a SCZ carbopol-based gel. In vivo antifungal activity in rabbits presented faster healing of skin fungal infections. The histopathological examination of the treated skin from rabbits presented restoration of the dermal architecture. In summary, the approach of formulating SLNs into a topical gel presented an advantageous drug delivery system against mycosis. [ABSTRACT FROM AUTHOR]

Reversible emulsification drilling fluids can achieve conversion between oil-based drilling fluids and water-based drilling fluids at different stages of drilling and completion, combining the advantages of both to achieve the desired drilling and completion effects. The foundation of reversible emulsion drilling fluids lies in reversible emulsions, and the core of a reversible emulsion is the reversible emulsifier. In this study, we prepared a reversible emulsifier, DMOB(N,N-dimethyl-N′-oleic acid-1,4-butanediamine), and investigated the reversible phase inversion process of reversible emulsions, including the changes in the reversible emulsifier (HLB) and its distribution at the oil–water interface (zeta potential). From the perspective of the acid–alkali response mechanism of reversible emulsifiers, we explored the reversible phase inversion mechanism of reversible emulsions and reversible emulsification drilling fluids. It was revealed that the reversible phase inversion of emulsions could be achieved by adjusting the pH of the emulsion system. Then the proportion of ionic surfactants changed in the oil–water interface and subsequently raised/lowered the HLB value of the composite emulsifier at the oil–water interface, leading to reversible phase inversion of the emulsion. The introduction of organic clays into reversible emulsification drilling fluid can affect the reversible conversion performance of the drilling fluids at the oil–water interface. Thus, we also investigated the influence of organic clays on reversible emulsions. It was demonstrated that a dosage of organic clay of ≤2.50 g/100 mL could maintain the reversible phase inversion performance of reversible emulsions. By analyzing the microstructure of the emulsion and the complex oil–water interface, we revealed the mechanism of the influence of organic clay on the reversible emulsion. Organic clay distributed at the oil–water interface not only formed a complex emulsifier with surfactants, but also affected the microstructure of the emulsion, resulting in a difficult acid-induced phase transition, an easy alkali-induced phase transition, and improved overall stability. [ABSTRACT FROM AUTHOR]

Blueberry anthocyanins are water-soluble natural pigments that can be used as both natural antioxidants and natural colorants. However, their structural instability greatly limits their application in the food, pharmaceutical, and cosmetic industries. In this study, blueberry anthocyanin microcapsules (BAM) and blueberry anthocyanin liposomes (BAL) were fabricated based on blueberry anthocyanins. Film dispersion methods were used to prepare the BAL. Their preparation processes were optimized and compared to improve the stability of the blueberry anthocyanins following exposure to light and high temperatures. The BAM were prepared through complex phase emulsification. The blueberry anthocyanins were protected by the shell materials composed of sodium alginate after being formed into BAM. Under the optimal conditions, the embedding rate of BAM and BAL can reach as high as 96.14% and 81.26%, respectively. In addition, the particle size, zeta potential, microtopography, and structure feature information of the BAM and BAL were compared. The average particle sizes of the BAM and BAL were 9.78 μm and 290.2 nm, respectively, measured using a laser particle size analyzer, and the zeta potentials of the BAM and BAL were 34.46 mV and 43.0 mV, respectively. In addition, the optimal preparation processes were determined through single-factor and response surface optimization experiments. The most important factors in the single-factor experiment for the preparation of microcapsules and liposomes were the content of CaCl2 and the amount of anthocyanin. The preservation rates in the light and dark were also compared, and the thermal stabilities of the BAM and BAL were characterized through differential thermal scanning. The results showed that both the BAM and BAL maintained the stability of blueberry anthocyanins, and no significant difference was found between the indices used to evaluate their stability. The results of this study provide theoretical support for the development of effective systems to maintain the stability of anthocyanins, thereby improving their bioavailability after ingestion by humans. [ABSTRACT FROM AUTHOR]

Dextran, a variant of α-glucan with a significant proportion of α-(1,6) bonds, exhibits remarkable solubility in water. Nonetheless, the precipitation of dextran has been observed in injection vials during storage. The present study aimed to establish a technique for generating insoluble dextran and analyze its structural properties. Additionally, the potential for positively ionizing IS-dextran with polyethyleneimine was explored, with the ultimate objective of utilizing IS-dextran-PEI as a promising support for enzyme immobilization. As a result, IS-dextran was obtained by the process of slow evaporation with an average molecular weight of 6555 Da and a yield exceeding 60%. The calculated crystallinity of IS-dextran, which reaches 93.62%, is indicative of its irregular and dense structure, thereby accounting for its water insolubility. Furthermore, positive charge modification of IS-dextran, coupled with the incorporation of epichlorohydrin, resulted in all zeta potentials of IS-dextran-PEIs exceeding 30 mV, making it a promising supporting factor for enzyme immobilization. [ABSTRACT FROM AUTHOR]

Hydrogen bonds play an important role in the interaction between surfactants. In this study, the effect of three different ethoxylated alcohols (OP-10, NP-10, AEO-9) on the collecting behavior of sodium oleate (NaOL) in the flotation of quartz was investigated. To explore the mechanism, the hydrogen bond between ethoxylated alcohols and NaOL was analyzed using molecular dynamics (MD) simulation. The results showed that ethoxylated alcohols promoted the collecting performance of NaOL and reduced the dosage of the activator CaO and the collector NaOL in the flotation of quartz. The Zeta potential measurement illustrated that ethoxylated alcohols promoted the adsorption of OL− on the activated quartz surface and the degree of promotion was in the order of OP-10 > NP-10 > AEO-9. The MD simulation results showed that a hydrogen bond presented between ethoxylated alcohols and OL−. Due to the hydrogen bond between the ethoxylated alcohols and OL−, the attraction force between OL− and the quartz surface increased with the addition of ethoxylated alcohols in the order of OP-10 > NP-10 > AEO-9 based on the MD simulation results. As the result, the addition of ethoxylated alcohols increased the adsorption density of OL− on the activated quartz surface, which explained the promotion of the collecting performance of OL− in the flotation of quartz. [ABSTRACT FROM AUTHOR]