Search

EPR imaging techniques are known to be successful tools for mapping living bodies, especially because of the high transparency of tissues in the microwave range. This technique assumes the presence of radicals whose in vivo transport is also controlled by serum albumins. Accordingly, in this study, the interactions between 3-hydroxymethyl-1-oxyl-4-(pyren-1-yl)-2,2,5,5-tetramethyl-2,5-dihydro-1 H -pyrrole radical and the human serum albumin molecules were investigated. To clarify the adsorption processes of this radical onto the surface of human serum albumin (HSA), the interaction of the OMe derivative of the radical was also examined parallel with the studies on the radical-HSA interactions. Considering the solubility issues and also to modulate the transport, inclusion complexes of the radical with a cavitand derivative were also studied. The latter interactions were observed through fluorescence spectroscopy, fluorescence polarization, and by EPR spectroscopy. As a double-sensor molecule, we found that the fluorophore nitroxide is a good candidate as it gave further information about host-guest interactions (fluorescence, fluorescence polarization, and EPR). We also found that in the presence of a cavitand, a complex with greater stability was formed between the sensor molecule and the human serum albumin. Based on these observations, we can conclude that applying this double-sensor (spin, fluorescent) molecule is useful in cases when different interactions can affect the EPR measurements.

In this research, ethyl levulinate, methyl levulinate, and 2-methyltetrahydrofuran as bio-derived hemicellulose-based solvents were applied as green alternatives in palladium-catalyzed aminocarbonylation reactions. Iodobenzene and morpholine were used in optimization reactions under different conditions, such as temperatures, pressures, and ligands. It was shown that the XantPhos ligand had a great influence on conversion (98%) and chemoselectivity (100% carboxamide), compared with the monodentate PPh 3 . Following this study, the optimized conditions were used to extend the scope of substrates with nineteen candidates (various para-, ortho-, and meta-substituted iodobenzene derivatives and iodo-heteroarenes), as well as eight different amine nucleophiles.

Due to the medical importance of dibenzoylmethane, one of the aims of the study was to find an appropriate packing material and a biologically friendly co-solvent to help its introduction into living systems. Accordingly, redox properties of dibenzoylmethane were investigated on glassy carbon electrodes in acetonitrile and in 1-propanol with cyclic voltammetry, and showed a diffusion-controlled process. In the anodic window, an oxidation peak appeared at around 1.9 V in both solvents. Cycling repeatedly between 0 and 2 V, the reproducibility of this peak was acceptable, but when extending the window to higher potentials, the electrode deactivated, obviously due to electrode material. The addition of the investigated tetrakis(3,5-dicarboxyphenoxy) cavitand did not significantly change the voltammograms. Further electrochemical experiments showed that the coexistence of water in acetonitrile and 1-propanol drastically reduces the solubility of dibenzoylmethane. Moreover, very rapid electrode deactivation occurred and this fact made the use of electrochemical methods complicated. Considering that both the cavitand and dibenzoylmethane are soluble in dimethyl sulfoxide, the interaction of these species was investigated and formation of stable complexes was detected. This observation was verified with fluorescence quenching studies. The mixture of water and dimethyl sulphoxide also dramatically improved the solubility of the cavitand-dibenzoylmethane complex at high excess of water. The addition of cavitand improved the solubility of dibenzoylmethane, a property which supports the application of dibenzoylmethane in therapy.

Novel, elongated, resorcine[4]arene-based cavitands were synthesized via various consecutive reaction steps, including homogeneous catalytic aryloxy- and azidocarbonylation processes. The effects of carbon monoxide pressure and temperature on the conversion were examined in aryloxycarbonylation. It was revealed that a reaction temperature of 100 °C is required to achieve complete conversion both with monodentate (PPh 3 ) and bidentate (Xantphos) phosphines at different carbon monoxide pressures (1-40 bar). Using ten different phenols as O -nucleophiles, partial hydrolysis of the esters to the corresponding carboxylic acids took place-i.e., 58-90% chemoselectivities toward esters were obtained. Moreover, the influences of temperature, reaction time and the catalyst ratio on the selectivity and conversion were described in the case of azidocarbonylation reaction. The formation of the acyl azide with high chemoselevtivity can be achieved at room temperature only. The higher reaction temperatures (50 °C) and higher catalyst loadings favor the formation of the primary amide. The characterization of the target compounds (esters and acyl azides) was carried out by IR and 1 H and 1 3C NMR. The discussion of the influences of various parameters is based on in situ NMR investigations.

The electropolymerization of three phenylphenol isomers was studied in methyl isobutyl ketone and mesityl oxide, and the remarkable differences highlighted the importance of the carbon-carbon double bond in mesityl oxide. In the case of each substrate, a brownish deposit formed during the electrooxidation. The obvious difference between the polymers formed from the two solvents was recognized via voltammetric signal enhancement of 4-methoxyphenol and 4-chlorophenol, and it was only observed in the case of mesityl oxide. The experiments highlighted that incorporation of a cavitand with biphenyl groups on the upper rim of the polymers of phenylphenols improved the results to a small extent. The cavitand was, itself, electroactive without any fouling effect. As 2-phenylphenol is by far the cheapest of the three isomers, a cavitand was incorporated into its polymer, which was exploited to solve analytical problems while mesityl oxide was used as solvent. Useful quantifications were achieved in organic solvents; however, it failed under aqueous conditions due to the high hydrophobicity of the deposit. Application of differential pulse voltammetry for 4-methoxyphenol and 4-chlorophenol gave detection limits of 9.28 and 50.8 μM in acetonitrile, respectively. This procedure resulted in the immobilization of cavitand derivatives onto the electrode's surface, and the layer formed offered selective sensing of phenols by electrochemical methods.

Four stereoisomeric monoether derivatives, based on axially chiral ( R )- or ( S )-BINOL bearing a chiral (+)- or (-)-neomenthyloxy group were synthesised and fully characterised by NMR spectroscopy and X-ray crystallography. The respective tris-monophosphites were thereof prepared and fully characterised. The coordination ability of the new bulky phosphites with Rh(CO) 2 (acac), was attested by 31 P NMR, which presented a doublet in the range of δ = 120 ppm, with a 1 J ( 103 Rh- 31 P) coupling constant of 290 Hz. The new tris-binaphthyl phosphite ligands were further characterised by DFT computational methods, which allowed us to calculate an electronic (CEP) parameter of 2083.2 cm -1 and an extremely large cone angle of 345°, decreasing to 265° upon coordination with a metal atom. Furthermore, the monophosphites were applied as ligands in rhodium-catalysed hydroformylation of styrene, leading to complete conversions in 4 h, 100% chemoselectivity for aldehydes and up to 98% iso -regioselectivity. The Rh(I)/phosphite catalytic system was also highly active and selective in the hydroformylation of disubstituted olefins, including ( E )-prop-1-en-1-ylbenzene and prop-1-en-2-ylbenzene.

The aminocarbonylation of 6-iodoquinoline has been investigated in the presence of large series of amine nucleophiles, providing an efficient synthetic route for producing various quinoline-6-carboxamide and quinoline-6-glyoxylamide derivatives. It was shown, after detailed optimization study, that the formation of amides and ketoamides is strongly influenced by the reaction conditions. Performing the reactions at 40 bar of carbon monoxide pressure in the presence of Pd(OAc) 2 /2 PPh 3 , the corresponding 2-ketocarboxamides were formed as major products (up to 63%). When the monodentate triphenylphosphine was replaced by the bidentate XantPhos, the quinoline-6-carboxamide derivatives were synthesized almost exclusively under atmospheric conditions (up to 98%). The isolation and characterization of the new carbonylated products of various structures were also accomplished. Furthermore, the structure of three new mono- and double-carbonylated compounds were unambiguously established by using a single-crystal XRD study.

The aminocarbonylation of various alkenyl and (hetero)aryl iodides was carried out using tropane-based amines of biological importance, such as 8-azabicyclo[3.2.1]octan-3-one (nortropinone) and 3α-hydroxy-8-azabicyclo[3.2.1]octane (nortropine) as N -nucleophile. Using iodoalkenes, the two nucleophiles were selectively converted to the corresponding amide in the presence of Pd(OAc) 2 /2 PPh 3 catalysts. In the presence of several iodo(hetero)arenes, the application of the bidentate Xantphos was necessary to produce the target compounds selectively. The new carboxamides of varied structure, formed in palladium-catalyzed aminocarbonylation reactions, were isolated and fully characterized. In this way, a novel synthetic method has been developed for the producing of N -acylnortropane derivatives of biological importance.

The mechanism of the carbonylation of diazomethane in the presence of iron-carbonyl-phosphine catalysts has been investigated by means of DFT calculations at the M06/def-TZVP//B97D3/def2-TZVP level of theory, in combination with the SMD solvation method. The reaction rate is determined by the formation of the coordinatively unsaturated doublet-state Fe(CO) 3 (P) precursor followed by the diazoalkane coordination and the N 2 extrusion. The free energy of activation is predicted to be 18.5 and 28.2 kcal/mol for the PF 3 and PPh 3 containing systems, respectively. Thus, in the presence of less basic P-donor ligands with stronger π-acceptor properties, a significant increase in the reaction rate can be expected. According to energy decomposition analysis combined with natural orbitals of chemical valence (EDA-NOCV) calculations, diazomethane in the Fe(CO) 3 (phosphine)( η 1 -CH 2 N 2 ) adduct reveals a π-donor-π-acceptor type of coordination.

Interaction of 4-quinazolinone with tetrakis (3,5-dicarboxylatophenoxy)-cavitand derivative has been studied in methanol and dimethylformamide media using fluorescence spectroscopy and molecular modeling methods. Results show temperature dependent complex formation: either the entropy gain or the high enthalpy changes are responsible for the formation of stable complexes in two separated temperature regions. However, different thermodynamic parameters are associated to different conformations of the complexes: while the high entropy gain associated to the formation of deeply included guest in methanol, the high entropy gain is associated with the formation of weakly included guest in dimethylformamide solvent. This finding highlights the importance of dynamic properties of the species interacted in different solvents.

The applicability of two types of transition-metal carbonyl complexes as appropriate candidates for computationally derived Tolman's ligand electronic parameters were examined with density functional theory (DFT) calculations employing the B97D3 functional. Both Pd (0) L2(CO) and HRh (I) L2(CO) complexes correlated well with the experimental Tolman Electronic Parameter scale. For direct comparison of the electronic effects of diphosphines with those of monophosphines, the palladium-containing system is recommended. The t r a n s influence of various phosphines did not show a major difference, but the decrease of the H-Rh-P angle from linear can cause a significant change.