Search

Various approaches to improve the efficiency of solar cells have followed the integration of nanomaterials into Si-based photovoltaic devices. Here, we achieve 13.8% efficiency solar cells by combining carbon nanotubes and Si and doping with dilute HNO(3). Acid infiltration of nanotube networks significantly boost the cell efficiency by reducing the internal resistance that improves fill factor and by forming photoelectrochemical units that enhance charge separation and transport. Compared to conventional Si cells, the fabrication process is greatly simplified, simply involving the transfer of a porous semiconductor-rich nanotube film onto an n-type crystalline Si wafer followed by acid infiltration.

Developing nanostructure junctions is a general and effective way for making photovoltaics. We report Schottky junction solar cells by coating carbon nanotube films on individual CdSe nanobelts with open-circuit voltages of 0.5 to 0.6 V and modest power-conversion efficiencies (0.45-0.72%) under AM 1.5G, 100 mW/cm(2) light condition. In our planar device structure, the CdSe nanobelt serves as a flat substrate to sustain a network of nanotubes, while the nanotube film forms Shottky junction with the underlying nanobelt at their interface and also makes a transparent electrode for the device. The nanotube-on-nanobelt solar cells can work either in front (nanotube side) or back (nanobelt side) illumination with stable performance in air. Our results demonstrate a promising way to develop large-area solar cells based on thin films of carbon nanotubes and semiconducting nanostructures.

A hybrid solar cell model composed of a heterojunction cell and a photoelectrochemical (PEC) cell has been proposed and characterized. In the hybrid cell, a thin film of double-walled carbon nanotubes forms a heterojunction with the silicon nanowire (SiNW) array and also functions as the transparent counter electrode of the PEC cell. The cell performance can be readily tuned by controlling the SiNW density. Under AM 1.5G illumination, a power conversion efficiency of 1.29%, higher than those reported for SiNW array-based PEC cells, has been obtained.

Carbon nanotube-Si and graphene-Si solar cells have attracted much interest recently owing to their potential in simplifying manufacturing process and lowering cost compared to Si cells. Until now, the power conversion efficiency of graphene-Si cells remains under 10% and well below that of the nanotube-Si counterpart. Here, we involved a colloidal antireflection coating onto a monolayer graphene-Si solar cell and enhanced the cell efficiency to 14.5% under standard illumination (air mass 1.5, 100 mW/cm(2)) with a stable antireflection effect over long time. The antireflection treatment was realized by a simple spin-coating process, which significantly increased the short-circuit current density and the incident photon-to-electron conversion efficiency to about 90% across the visible range. Our results demonstrate a great promise in developing high-efficiency graphene-Si solar cells in parallel to the more extensively studied carbon nanotube-Si structures.

We directly configured double-walled carbon nanotubes as energy conversion materials to fabricate thin-film solar cells, with nanotubes serving as both photogeneration sites and a charge carriers collecting/transport layer. The solar cells consist of a semitransparent thin film of nanotubes conformally coated on a n-type crystalline silicon substrate to create high-density p-n heterojunctions between nanotubes and n-Si to favor charge separation and extract electrons (through n-Si) and holes (through nanotubes). Initial tests have shown a power conversion efficiency of >1%, proving that DWNTs-on-Si is a potentially suitable configuration for making solar cells. Our devices are distinct from previously reported organic solar cells based on blends of polymers and nanomaterials, where conjugate polymers generate excitons and nanotubes only serve as a transport path.