Search

The multifaceted applications of polymers are often limited by their thermal conductivity. Therefore, understanding the mechanisms of thermal transport in polymers is of vital interest. Here, we leverage molecular layer deposition to grow three types of hybrid metalcone (i.e., alucone, zincone, and tincone) films and study their thermal and acoustic properties. The thermal conductivity of the hybrid polymer films ranged from 0.43 to 1.14 W m -1 K -1 . Using kinetic theory, we trace the origin of thermal conductivity difference to sound speed change, which is dictated by the connection length within the films. Changing the connection length has negligible impacts on volumetric heat capacity and vibrational lifetimes. Our findings provide means to improve the thermal conductivity of organic, hybrid, and inorganic polymer films.

Core-shell structures consisting of thin shells of conformal TiO2 deposited on high surface area, conductive Sn-doped In2O3 nanoparticle. Mesoscopic films were synthesized by atomic layer deposition and studied for application in dye-sensitized solar cells. Results obtained with the N719 dye show that short-circuit current densities, open-circuit voltages, and back electron transfer lifetimes all increased with increasing TiO2 shell thickness up to 1.8-2.4 nm and then decline as the thickness was increased further. At higher shell thicknesses, back electron transfer to -Ru(III) is increasingly competitive with transport to the nanoITO core resulting in decreased device efficiencies.

Device lifetimes and commercial viability of dye-sensitized solar cells (DSSCs) and dye-sensitized photoelectrosynthesis cells (DSPECs) are dependent on the stability of the surface bound molecular chromophores and catalysts. Maintaining the integrity of the solution-metal oxide interface is especially challenging in DSPECs for water oxidation where it is necessary to perform high numbers of turnovers, under irradiation in an aqueous environment. In this study, we describe the atomic layer deposition (ALD) of TiO2 on nanocrystalline TiO2 prefunctionalized with the dye molecule [Ru(bpy)2(4,4'-(PO3H2)bpy)](2+) (RuP) as a strategy to stabilize surface bound molecules. The resulting films are over an order of magnitude more photostable than untreated films and the desorption rate constant exponentially decreases with increased thickness of ALD TiO2 overlayers. However, the injection yield for TiO2-RuP with ALD TiO2 also decreases with increasing overlayer thickness. The combination of decreased injection yield and 95% quenched emission suggests that the ALD TiO2 overlayer acts as a competitive electron acceptor from RuP*, effectively nonproductively quenching the excited state. The ALD TiO2 also increases back electron transfer rates, relative to the untreated film, but is independent of overlayer thickness. The results for TiO2-RuP with an ALD TiO2 overlayer are compared with similar films having ALD Al2O3 overlayers.

Photoelectrochemical (PEC) water splitting and solar fuels hold great promise for harvesting solar energy. TiO2-based photoelectrodes for water splitting have been intensively investigated since 1972. However, solar-to-fuel conversion efficiencies of TiO2 photoelectrodes are still far lower than theoretical values. This is partially due to the dilemma of a short minority carrier diffusion length, and long optical penetration depth, as well as inefficient electron collection. We report here the synthesis of TiO2 PEC electrodes by coating solution-processed antimony-doped tin oxide nanoparticle films (nanoATO) on FTO glass with TiO2 through atomic layer deposition. The conductive, porous nanoATO film-supported TiO2 electrodes, yielded a highest photocurrent density of 0.58 mA/cm(2) under AM 1.5G simulated sunlight of 100 mW/cm(2). This is approximately 3× the maximum photocurrent density of planar TiO2 PEC electrodes on FTO glass. The enhancement is ascribed to the conductive interconnected porous nanoATO film, which decouples the dimensions for light absorption and charge carrier diffusion while maintaining efficient electron collection. Transient photocurrent measurements showed that nanoATO films reduce charge recombination by accelerating transport of photoelectrons through the less defined conductive porous nanoATO network. Owing to the large band gap, scalable solution processed porous nanoATO films are promising as a framework to replace other conductive scaffolds for PEC electrodes.

Atomic layer deposition (ALD) of Al2O3 on electrospun poly(vinyl alcohol) microfiber templates is demonstrated as an effective and robust strategy by which to fabricate long and uniform metal-oxide microtubes. The wall thickness is shown to be precisely controlled within a molecular layer or so by adjusting the number of ALD cycles utilized. By judicious selection of the electrospinning and ALD parameters, designer tubes of various sizes and inorganic materials can be synthesized.