Search

The development of novel materials with coexisting volatile threshold and non-volatile memristive switching is crucial for neuromorphic applications. Hence, the aim of this work was to investigate the memristive properties of oxides in a Hf–Nb thin-film combinatorial system deposited by sputtering on Si substrates. The active layer was grown anodically on each Hf–Nb alloy from the library, whereas Pt electrodes were deposited as the top electrodes. The devices grown on Hf-45 at.% Nb alloys showed improved memristive performances reaching resistive state ratios up to a few orders of magnitude and achieving multi-level switching behavior while consuming low power in comparison with memristors grown on pure metals. The coexistence of threshold and resistive switching is dependent upon the current compliance regime applied during memristive studies. Such behaviors were explained by the structure of the mixed oxides investigated by TEM and XPS. The mixed oxides, with HfO2 crystallites embedded in quasi amorphous and stoichiometrically non-uniform Nb oxide regions, were found to be favorable for the formation of conductive filaments as a necessary step toward memristive behavior. Finally, metal–insulator–metal structures grown on the respective alloys can be considered as relevant candidates for the future fabrication of anodic high-density in-memory computing systems for neuromorphic applications. [ABSTRACT FROM AUTHOR]

Activated carbons derived from viscose fibers were prepared using potassium hydroxide, carbon dioxide, or water vapor as activation agents. The produced activated carbon fibers were analyzed via scanning electron microscopy and energy dispersive X-ray spectroscopy, and their porosity (specific surface area, total pore volume, and pore size distribution) was calculated employing physisorption experiments. Activated carbon fibers with a specific surface area of more than 2500 m2 g−1 were obtained by each of the three methods. Afterwards, the suitability of these materials as electrodes for electrochemical double-layer capacitors (supercapacitors) was investigated using cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. By combining CO2 and H2O activation, activated carbon fibers of high purity and excellent electrochemical performance could be obtained. A specific capacitance per electrode of up to 180 F g−1 was found. In addition, an energy density per double-layer capacitor of 42 W h kg−1 was achieved. These results demonstrate the outstanding electrochemical properties of viscose-based activated carbon fibers for use as electrode materials in energy storage devices such as supercapacitors. [ABSTRACT FROM AUTHOR]

Bacterial adhesion and biofilm formation on surfaces are associated with persistent microbial contamination, biofouling, and the emergence of resistance, thus, calling for new strategies to impede bacterial surface colonization. Using ns-UV laser treatment (wavelength 248 nm and a pulse duration of 20 ns), laser-induced periodic surface structures (LIPSS) featuring different sub-micrometric periods ranging from ~210 to ~610 nm were processed on commercial poly(ethylene terephthalate) (PET) foils. Bacterial adhesion tests revealed that these nanorippled surfaces exhibit a repellence for E. coli that decisively depends on the spatial periods of the LIPSS with the strongest reduction (~91%) in cell adhesion observed for LIPSS periods of 214 nm. Although chemical and structural analyses indicated a moderate laser-induced surface oxidation, a significant influence on the bacterial adhesion was ruled out. Scanning electron microscopy and additional biofilm studies using a pili-deficient E. coli TG1 strain revealed the role of extracellular appendages in the bacterial repellence observed here. [ABSTRACT FROM AUTHOR]