Search

InAs doping superlattice-based solar cells have great advantages in terms of the ability to generate clean energy in space or harsh environments. In this paper, multi-period InAs doping superlattice solar cells have been prepared.. Current density–voltage measurements were taken both in the dark and light, and the short-circuit current was estimated to be 19.06 mA/cm2. Efficiency improvements were achieved with a maximum one sun AM 1.5 G efficiency of 4.14%. Additionally, external quantum efficiency and photoluminescence with different temperature-dependent test results were taken experimentally. The corresponding absorption mechanisms were also investigated. [ABSTRACT FROM AUTHOR]

The photocatalysis technique has been proven to be a promising method to solve environmental pollution in situations of energy shortage, and has been intensively investigated in the field of pollutant degradation. In this work, a band structure-controlled solid solution of BiOBrXI1−X (x = 0.00, 0.05, 0.10, 0.15, 0.20, 1.00) with highly efficient light-driven photocatalytic activities was successfully synthesized via simple solvothermal methods. The phase composition, crystal structure, morphology, internal molecular vibration, optical properties, and energy band structure were characterized and analyzed by XRD, SEM, HRTEM, XPS, Raman, and UV Vis DRS. To evaluate the photocatalytic activity of BiOBrXI1−X, rhodamine B was selected as an organic pollutant. In particular, BiOBr0.15I0.85 displayed significantly enhanced photocatalytic activity by virtue of modulating the energy band position, optimizing redox potentials, and accelerating carrier separation. Moreover, the enhancement mechanism was elucidated on the basis of band structure engineering, which provides ideas for the design of highly active photocatalysts for practical application in the fields of environmental issues and energy conservation. [ABSTRACT FROM AUTHOR]

Recently, different kinds of energy band structures have been utilized to improve the photoelectric properties of zinc oxide (ZnO). In this work, ZnO nanorods were prepared by the hydrothermal method and then decorated with silver sulfide (Ag2S)/zinc sulfide (ZnS) via two-step successive ionic layer adsorption and reaction method. The photoelectric properties of nanocomposites are investigated. The results show that ZnO decorated with Ag2S/ZnS can improve the photocurrent of photodetectors from 0.34 to 0.56 A at bias of 9 V. With the immersion time increasing from 15 to 60 minutes, the photocurrent of photodetectors increases by 0.22 A. The holes in the valence band of ZnO can be transferred to the valence band of ZnS and Ag2S, which promotes the separation and suppresses the recombination of hole-electron pairs generated in ZnO. Moreover, electrons excited by ultraviolet (UV) light in Ag2S can also be injected into the conduction band of ZnO, which causes the photocurrent to increase more than the ZnO photodetector. [ABSTRACT FROM AUTHOR]

Self-Assembly Synthesis of the MoS 2 /PtCo Alloy Counter Electrodes for High-Efficiency and Stable Low-Cost Dye-Sensitized Solar Cells. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. Reference 1 Zeng Z., Wang D., Wang J., Jiao S., Huang Y., Zhao S., Zhang B., Ma M., Gao S., Feng X. Self-Assembly Synthesis of the MoS2/PtCo Alloy Counter Electrodes for High-Efficiency and Stable Low-Cost Dye-Sensitized Solar Cells. [Extracted from the article]

Photocatalytic water splitting into hydrogen is regarded as one of the key solutions to the deterioration of the global environment and energy. Due to the significantly reduced grain boundaries, ZnO nanorods facilitate a fast electron transfer through their smooth tunnels and are well suited as a photocatalyst. However, the photocatalytic hydrogen evolution performance of pristine ZnO nanorods is still low due to the high recombination rate of photogenerated electron-hole pairs and the less light absorption. Here, a novel structure about black ZnO nanorods (NRs)/TiO2-X mesoporous spheres (MSs) heterojunction has been prepared and the photocatalytic hydrogen evolution performance has been explored. The photocatalytic activity test results showed that ZnO NRs/TiO2-X MSs exhibited higher catalytic activity than ZnO NRs for hydrogen production. Compared to the pure ZnO NRs photoanode, the photocurrent of ZnO NRs/TiO2-X MSs heterojunction photoanode could reach 0.41 mA/cm2 in view of the expanding spectral response region and effective inhibition of e−/h+ recombination at the same condition. Using a relatively integrated experimental investigation and mechanism analysis, we scrutinized that after being treated with NaBH4, TiO2 MSs introduce oxygen vacancies expanding the photocatalytic activity of pure TiO2, and improving conductivity and charge transport capabilities through coating on ZnO NRs. More importantly, the results provide a promising approach in the NRs/MSs composite structure serving as photoanodes for photocatalytic hydrogen production. [ABSTRACT FROM AUTHOR]

In this work, MoS2 microspheres/PtCo-alloy nanoparticles (MoS2/PtCo-alloy NPs) were composited via a novel and facile process which MoS2 is functionalized by poly (N-vinyl-2-pyrrolidone) (PVP) and self-assembled with PtCo-alloy NPs. This new composite shows excellent electrocatalytic activity and great potential for dye-sensitized solar cells (DSSCs) as a counter electrode (CE) material. Benefiting from heterostructure and synergistic effects, the MoS2/PtCo-alloy NPs exhibit high electrocatalytic activity, low charge-transfer resistance and stability in the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) test. Meanwhile, a high power-conversion efficiency (PCE) of 8.46% is achieved in DSSCs with MoS2/PtCo-alloy NP CEs, which are comparable to traditional Pt CEs (8.45%). This novel composite provides a new high-performance, stable and cheap choice for CEs in DSSCs. [ABSTRACT FROM AUTHOR]