Search

The ongoing energy crisis has made it imperative to develop low-cost, easily fabricated, yet efficient materials. It is highly desirable for these nanomaterials to function effectively in multiple applications. Among transition metal dichalcogenides, tungsten diselenide (WSe 2 ) shows great promise but remains understudied. In this work, we doped WSe 2 with Mn using a simple hydrothermal method. The resulting material exhibited excellent electrocatalytic activity for the hydrogen evolution reaction, achieving a low overpotential of -0.28 V vs. RHE at -10 mA cm -2 , enhanced conductivity, and high stability and durability. Moreover, as an anode material in lithium-ion batteries, the Mn-doped WSe 2 outperformed pristine WSe 2 , reaching initial discharge capacities of 1223 and 922 mA h g -1 , respectively. Additionally, the Mn-doped material maintained a significantly higher discharge capacity of 201 mA h g -1 compared to intact WSe 2 , which had 68 mA h g -1 after 150 cycles. This work offers novel insights into designing efficient bifunctional nanomaterials using transition metal dichalcogenides.

Vanadium oxides exist in a multitude of phases with varying structure and stoichiometry. This abundance of phases can be extended through the use of other oxides as supports, and through redox treatments. However, the combined effects of different supports and redox treatments can be difficult to identify, particularly when present as different terminating facets on nanoparticles. Here, we examine structural dynamics of 2D vanadium oxides supported on anatase TiO 2 nanoparticles, correlated with changes in oxidation state, using in situ transmission electron microscopy imaging and electron energy loss spectroscopy. As the average oxidation state is reduced below V(IV), an ordered cubic V(II) phase is observed exclusively at the high-index {10 l } facets of the support. This local accommodation of highly reduced states is necessary for explaining the observed range of average oxidation states. In turn, the findings show that oxidation states extending from V(V)-V(IV) to V(II) can be simultaneously stabilized by different supporting oxide surfaces during exposure to atmospheres with controlled redox potential.

While molecular doping is ubiquitous in all branches of organic electronics, little is known about the spatial distribution of dopants, especially at molecular length scales. Moreover, a homogeneous distribution is often assumed when simulating transport properties of these materials, even though the distribution is expected to be inhomogeneous. In this study, electron tomography is used to determine the position of individual molybdenum dithiolene complexes and their three-dimensional distribution in a semiconducting polymer at the sub-nanometre scale. A heterogeneous distribution is observed, the characteristics of which depend on the dopant concentration. At 5 mol% of the molybdenum dithiolene complex, the majority of the dopant species are present as isolated molecules or small clusters up to five molecules. At 20 mol% dopant concentration and higher, the dopant species form larger nanoclusters with elongated shapes. Even in case of these larger clusters, each individual dopant species is still in contact with the surrounding polymer. The electrical conductivity first strongly increases with dopant concentration and then slightly decreases for the most highly doped samples, even though no large aggregates can be observed. The decreased conductivity is instead attributed to the increased energetic disorder and lower probability of electron transfer that originates from the increased size and size variation in dopant clusters. This study highlights the importance of detailed information concerning the dopant spatial distribution at the sub-nanometre scale in three dimensions within the organic semiconductor host. The information acquired using electron tomography may facilitate more accurate simulations of charge transport in doped organic semiconductors.

Redox processes of oxide materials are fundamental in catalysis. These processes depend on the surface structure and stoichiometry of the oxide and are therefore expected to vary between surface facets. However, there is a lack of direct measurements of redox properties on the nanoscale for analysing the importance of such faceting effects in technical materials. Here, we address the facet-dependent redox properties of vanadium-oxide-covered anatase nanoparticles of relevance to, e.g., selective catalytic reduction of nitrogen oxides. The vanadium oxidation states at individual nanoscale facets are resolved in situ under catalytically relevant conditions by combining transmission electron microscopy imaging and electron energy loss spectroscopy. The measurements reveal that vanadium on {001} facets consistently retain higher oxidation states than on {10l} facets. Insight into such structure-sensitivity of surface redox processes opens prospects of tailoring oxide nanoparticles with enhanced catalytic functionalities.

The ability to tune the localized surface plasmon resonance (LSPR) of nanostructures is desirable for surface enhanced Raman spectroscopy (SERS), plasmon-assisted chemistry and other nanophotonic applications. Although historically the LSPR is mainly studied by optical techniques, with the recent advancement in electron monochromators and correctors, it has attracted considerable attention in transmission electron microscopy (TEM). Here, we use electron energy loss spectroscopy (EELS) in a scanning TEM to study individual gold nanodiscs and bowties in lithographic arrays with variable LSPRs by adjusting the size, interspacing, shape and dielectric environment during the nanofabrication process. We observe the strongest Raman signal enhancement when the LSPR frequency is close to the incident laser frequency in Raman spectroscopy. A simplified harmonic oscillator model is used to estimate SERS enhancement factor (EF) from EELS, bridging the connection between electron and photon excitation of plasmonic arrays. This work demonstrates that STEM-EELS shows promise for revealing the contributions of specific LSPR modes to SERS EF. Our results provide guidelines to fine-tune nanoparticle parameters to deliver the maximum signal enhancement in biosensing applications, such as early cancer detection.

Nanoparticle dimers composed of different metals or metal oxides, as well as different shapes and sizes, are of wide interest for applications ranging from nanoplasmonic sensing to nanooptics to biomedical engineering. Shaped nanoparticles, like triangles and nanorods, can be particularly useful in applications due to the strong localized plasmonic hot-spot that forms at the tips or corners. By placing catalytic, but traditionally weakly- or non-plasmonic nanoparticles, such as metal oxides and metals like palladium, in these hot-spots, an enhanced function for sensing, photocatalysis or optical use is predicted. Here, we present an electrostatic colloidal assembly strategy for nanoparticles, incorporating different sizes, shapes and metal or metal oxide compositions into heterodimers with smaller gaps than are achievable using nanofabrication techniques. This versatile method is demonstrated on 14 combinations, including a variety of shaped gold nanoparticles as well as palladium, iron oxide, and titanium oxide nanoparticles. These colloidal nanoparticles are stabilized with traditional surfactants, such as citrate, CTAB, PVP and oleic acid/oleylamines, indicating the wide applicability of our approach. Heterodimers of gold and palladium are further analyzed using cathodoluminescence to demonstrate the tunability of these "plasmonic molecules". Since systematically altering the absorption and emission of the plasmonic nanoparticles dimers is crucial to extending their functionality, and small gap sizes produce the strongest hot-spots, this method indicates that the electrostatic approach to heterodimer assembly can be useful in creating new nanoparticle dimers for many applications.

In this paper, a computational study of Li, Na, and K adsorption and migration on pristine and defective graphene surfaces is conducted to gain insight into the metal storage and mobility in carbon-based anodes for alkali metal batteries. Atomic level studies of the metal adsorption and migration on the graphene surface can help address the challenges faced in the development of novel alkali metal battery technologies, as these systems act as convenient proxies of the crystalline carbon surface in carbon-based materials including graphite, hard carbons and graphene. The adsorption of Li and K ions on the pristine graphene surface is shown to be more energetically favourable than Na adsorption. A collection of defects expected to be found in carbonaceous materials are investigated in terms of metal storage and mobility, with N- and O-containing defects found to be the dominant defects on these carbon surfaces. Metal adsorption and migration at the defect sites show that defect sites tend to act as metal trapping sites, and metal diffusion around the defects is hindered when compared to the pristine surface. We identify a defect where two C sites are substituted with O and one C site with N as the dominant surface defect, and find that this defect is detrimental to metal migration and hence the battery cycling performance.

The formation of fullerene crystals represents a major degradation pathway of polymer/fullerene bulk-heterojunction thin films that inexorably deteriorates their photovoltaic performance. Currently no tools exist that reveal the origin of fullerene crystal formation vertically through the film. Here, we show that electron tomography can be used to study nucleation and growth of fullerene crystals. A model bulk-heterojunction blend based on a thiophene-quinoxaline copolymer and a fullerene derivative is examined after controlled annealing above the glass transition temperature. We image a number of fullerene nanocrystals, ranging in size from 70 to 400 nanometers, and observe that their center is located close to the free-surface of spin-coated films. The results show that the nucleation of fullerene crystals predominately occurs in the upper part of the films. Moreover, electron tomography reveals that the nucleation is preceded by more pronounced phase separation of the blend components.