Search

Geometric or electronic confinement of guests inside nanoporous hosts promises to deliver unusual catalytic or opto-electronic functionality from existing materials but is challenging to obtain particularly using metastable hosts, such as metal-organic frameworks (MOFs). Reagents (e.g. precursor) may be too large for impregnation and synthesis conditions may also destroy the hosts. Here we use thermodynamic Pourbaix diagrams (favorable redox and pH conditions) to describe a general method for metal-compound guest synthesis by rationally selecting reaction agents and conditions. Specifically we demonstrate a MOF-confined RuO2 catalyst (RuO2@MOF-808-P) with exceptionally high catalytic CO oxidation below 150 °C as compared to the conventionally made SiO2-supported RuO2 (RuO2/SiO2). This can be caused by weaker interactions between CO/O and the MOF-encapsulated RuO2 surface thus avoiding adsorption-induced catalytic surface passivation. We further describe applications of the Pourbaix-enabled guest synthesis (PEGS) strategy with tutorial examples for the general synthesis of arbitrary guests (e.g. metals, oxides, hydroxides, sulfides).

A major challenge limiting the practical applications of nanomaterials is that the activities of nanostructures (NSs) increase with reduced size, often sacrificing their stability in the chemical environment. Under oxidative conditions, NSs with smaller sizes and higher defect densities are commonly expected to oxidize more easily, since high-concentration defects can facilitate oxidation by enhancing the reactivity with O2 and providing a fast channel for oxygen incorporation. Here, using FeO NSs as an example, we show to the contrary, that reducing the size of active NSs can drastically increase their oxidation resistance. A maximum oxidation resistance is found for FeO NSs with dimensions below 3.2 nm. Rather than being determined by the structure or electronic properties of active sites, the enhanced oxidation resistance originates from the size-dependent structural dynamics of FeO NSs in O2. We find this dynamic size effect to govern the chemical properties of active NSs.

The limited surface coverage and activity of active hydrides on oxide surfaces pose challenges for efficient hydrogenation reactions. Herein, we quantitatively distinguish the long-puzzling homolytic dissociation of hydrogen from the heterolytic pathway on Ga2O3, that is useful for enhancing hydrogenation ability of oxides. By combining transient kinetic analysis with infrared and mass spectroscopies, we identify the catalytic role of coordinatively unsaturated Ga3+ in homolytic H2 dissociation, which is formed in-situ during the initial heterolytic dissociation. This site facilitates easy hydrogen dissociation at low temperatures, resulting in a high hydride coverage on Ga2O3 (H/surface Ga3+ ratio of 1.6 and H/OH ratio of 5.6). The effectiveness of homolytic dissociation is governed by the Ga-Ga distance, which is strongly influenced by the initial coordination of Ga3+. Consequently, by tuning the coordination of active Ga3+ species as well as the coverage and activity of hydrides, we achieve enhanced hydrogenation of CO2 to CO, methanol or light olefins by 4-6 times. Zhu et al. report a quantitative and time-resolved analysis of hydrogen activation on Ga2O3, specifically shedding light on the long-standing puzzle of homolytic dissociation as opposed to the heterolytic pathway on oxides. [ABSTRACT FROM AUTHOR]

Significant progress has been demonstrated in the development of bifunctional oxide-zeolite catalyst concept to tackle the selectivity challenge in syngas chemistry. Despite general recognition on the importance of defect sites of metal oxides for CO/H2 activation, the actual structure and catalytic roles are far from being well understood. We demonstrate here that syngas conversion can be steered along a highly active and selective pathway towards light olefins via ketene-acetate (acetyl) intermediates by the surface with coordination unsaturated metal species, oxygen vacancies and zinc vacancies over ZnGaOx spinel−SAPO-34 composites. It gives 75.6% light-olefins selectivity and 49.5% CO conversion. By contrast, spinel−SAPO-34 containing only a small amount of oxygen vacancies and zinc vacancies gives only 14.9% light olefins selectivity at 6.6% CO conversion under the same condition. These findings reveal the importance to tailor the structure of metal oxides with coordination unsaturated metal sites/oxygen vacancies in selectivity control within the oxide-zeolite framework for syngas conversion and being anticipated also for CO2 hydrogenation. Great progress has been made in the development of bifunctional oxide-zeolite catalysts to tackle the selectivity challenge in syngas chemistry. Here the authors show syngas conversion can be steered along a highly active and selective pathway towards light olefins via ketene acetate (acetyl) intermediates. [ABSTRACT FROM AUTHOR]

Metal nanoparticles anchored on perovskite through in situ exsolution under reducing atmosphere provide catalytically active metal/oxide interfaces for CO2 electrolysis in solid oxide electrolysis cell. However, there are critical challenges to obtain abundant metal/oxide interfaces due to the sluggish diffusion process of dopant cations inside the bulk perovskite. Herein, we propose a strategy to promote exsolution of RuFe alloy nanoparticles on Sr2Fe1.4Ru0.1Mo0.5O6−δ perovskite by enriching the active Ru underneath the perovskite surface via repeated redox manipulations. In situ scanning transmission electron microscopy demonstrates the dynamic structure evolution of Sr2Fe1.4Ru0.1Mo0.5O6−δ perovskite under reducing and oxidizing atmosphere, as well as the facilitated CO2 adsorption at RuFe@Sr2Fe1.4Ru0.1Mo0.5O6−δ interfaces. Solid oxide electrolysis cell with RuFe@Sr2Fe1.4Ru0.1Mo0.5O6−δ interfaces shows over 74.6% enhancement in current density of CO2 electrolysis compared to that with Sr2Fe1.4Ru0.1Mo0.5O6−δ counterpart as well as impressive stability for 1000 h at 1.2 V and 800 °C. Metal nanoparticles anchored on perovskite provide catalytically active interfaces for CO2 electrolysis. The authors promote exsolution of RuFe alloy nanoparticles on Sr2Fe1.4Ru0.1Mo0.5 O6−δ perovskite by enriching the active Ru underneath the perovskite surface via repeated redox manipulations. [ABSTRACT FROM AUTHOR]

The self-powered and ultra-broadband photodetectors based on photothermoelectric (PTE) effect are promising for diverse applications such as sensing, environmental monitoring, night vision and astronomy. The sensitivity of PTE photodetectors is determined by the Seebeck coefficient and the rising temperature under illumination. Previous PTE photodetectors mostly rely on traditional thermoelectric materials with Seebeck coefficients in the range of 100 μV K−1, and array structures with multiple units are usually employed to enhance the photodetection performance. Herein, we demonstrate a reduced SrTiO3 (r-STO) based PTE photodetector with sensitivity up to 1.2 V W−1 and broadband spectral response from 325 nm to 10.67 μm. The high performance of r-STO PTE photodetector is attributed to its intrinsic high Seebeck coefficient and phonon-enhanced photoresponse in the long wavelength infrared region. Our results open up a new avenue towards searching for novel PTE materials beyond traditional thermoelectric materials for low-cost and high-performance photodetector at room temperature. Broadband photodetectors for various applications are in high demand, however, often suffering from non-linearities at high power densities. Here, a reduced strontium titanate based photodetector exhibiting linear response up to 1235 W/cm2 is presented not achieved by other broadband photodetectors. [ABSTRACT FROM AUTHOR]