Search

Abstract Enhancing corrosion resistance is essential for developing efficient electrocatalysts for acidic oxygen evolution reaction (OER). Herein, we report the strategic manipulation of the local compressive strain to reinforce the anti-corrosion properties of the non-precious Co3O4 support. The incorporation of Ru single atoms, larger in atomic size than Co, into the Co3O4 lattice (Ru-Co3O4), triggers localized strain compression and lattice distortion on the Co-O lattice. A comprehensive exploration of the correlation between this specific local compressive strain and electrocatalytic performance is conducted through experimental and theoretical analyses. The presence of the localized strain in Ru-Co3O4 is confirmed by operando X-ray absorption studies and supported by quantum calculations. This local strain, presented in a shortened Co-O bond length, enhances the anti-corrosion properties of Co3O4 by suppressing metal dissolutions. Consequently, Ru-Co3O4 shows satisfactory stability, maintaining OER for over 400 hours at 30 mA cm−2 with minimal decay. This study demonstrates the potential of the local strain effect in fortifying catalyst stability for acidic OER and beyond.

Abstract Direct photocatalytic conversion of methane to value-added C1 oxygenate with O2 is of great interest but presents a significant challenge in achieving highly selective product formation. Herein, a general strategy for the construction of copper single-atom catalysts with a well-defined coordination microenvironment is developed on the basis of metal-organic framework for selective photo-oxidation of CH4 to HCHO. We propose the directional activation of O2 on the mono-copper site breaks the original equilibrium and tilts the balance of radical formation almost completely toward •OOH. The synchronously generated •OOH and •CH3 radicals rapidly combine to form HCHO while inhibiting competing reactions, thus resulting in ultra-highly selective HCHO production (nearly 100%) with a time yield of 2.75 mmol gcat −1 h−1. This work highlights the potential of rationally designing reaction sites to manipulate reaction pathways and achieve selective CH4 photo-oxidation, and could guide the further design of high-performance single-atom catalysts to meet future demand.

Abstract Alkaline water electrolysis is a promising low-cost strategy for clean and sustainable hydrogen production but is largely limited by the sluggish anodic oxygen evolution reaction and the challenges in maintaining adequate separation between H2 and O2. Here, we reveal an anodic-cathodic sequential oxygen evolution process via electrochemical oxidation and subsequent reduction of Ni hydroxides, enabling much lower overpotentials than conventional anodic oxygen evolution. By using (isotope-labeled) differential electrochemical mass spectrometry and in situ Raman spectroscopy combined with density functional theory calculations, we evidence that the sequential oxygen evolution originates from the electrochemical oxidation of Ni hydroxides to NiOO– active species while undergoing a different, reductive step of NiOO– for the final release of O2 due to weakened Ni–O covalency. Based on this sequential process, we propose and demonstrate a hybrid water electrolysis and energy storage device, which enables time-decoupled hydrogen and oxygen evolution and electrochemical energy storage in the Ni hydroxides.

Abstract Ion selective membranes are fundamental components of biological, energy, and computing systems. The fabrication of solid-state ultrathin membranes that can separate ions of similar size and the same charge with both high selectivity and permeance remains a challenge, however. Here, we present a method, utilizing the application of a remote electric field, to fabricate a high-density of (sub)nm pores in situ. This method takes advantage of the grain boundaries in few-layer polycrystalline MoS2 to enable the synthesis of nanoporous membranes with average pore size tunable from

Abstract Self-assembled monolayers (SAMs) have become pivotal in achieving high-performance perovskite solar cells (PSCs) and organic solar cells (OSCs) by significantly minimizing interfacial energy losses. In this study, we propose a co-adsorb (CA) strategy employing a novel small molecule, 2-chloro-5-(trifluoromethyl)isonicotinic acid (PyCA-3F), introducing at the buried interface between 2PACz and the perovskite/organic layers. This approach effectively diminishes 2PACz’s aggregation, enhancing surface smoothness and increasing work function for the modified SAM layer, thereby providing a flattened buried interface with a favorable heterointerface for perovskite. The resultant improvements in crystallinity, minimized trap states, and augmented hole extraction and transfer capabilities have propelled power conversion efficiencies (PCEs) beyond 25% in PSCs with a p-i-n structure (certified at 24.68%). OSCs employing the CA strategy achieve remarkable PCEs of 19.51% based on PM1:PTQ10:m-BTP-PhC6 photoactive system. Notably, universal improvements have also been achieved for the other two popular OSC systems. After a 1000-hour maximal power point tracking, the encapsulated PSCs and OSCs retain approximately 90% and 80% of their initial PCEs, respectively. This work introduces a facile, rational, and effective method to enhance the performance of SAMs, realizing efficiency breakthroughs in both PSCs and OSCs with a favorable p-i-n device structure, along with improved operational stability.

Abstract Mechanochemistry studies the effect of mechanical force on chemical bonds, bringing opportunities for synthesizing alloys, ceramics, organics, polymers, and biomaterials. A vital issue of applying macro-scale mechanical force to manipulate crystal structures is finding ways to precisely adjust the force directions to break micro-scale target chemical bonds. Inspired by a common technique of driving a wedge into the wood to make wood chopping much easier, a wedging strategy of splitting three-dimensional structured crystalline frameworks and then converting them to nanosheets was proposed, where specific molecules were wedged into crystalline frameworks to drive the directional transmission of mechanical force to break chemical bonds. As a result, various crystalline framework nanosheets including metal−organic framework nanosheets, covalent organic framework nanosheets, and coordination polymer nanosheets were fabricated. This wedging crystal strategy exhibits advantages of operability, flexibility and designability, and furthermore, it is expected to expand mechanochemistry applications in material preparation.

Abstract Solar-driven atmospheric water extraction (SAWE) is a sustainable technology for decentralized freshwater supply. However, most SAWE systems produce water intermittently due to the cyclic nature, with adoption hindered by complex design requirements or periodic manual operations. Herein, a fully passive SAWE system that can continuously produce freshwater under sunlight is presented. By optimizing the three-dimensional architecture to facilitate spontaneous mass transport and efficient energy utilization, this system can consistently produce 0.65 L m−2 h−1 of freshwater under 1-sun illumination at 90% relative humidity (RH) and functions in arid environments with an RH as low as 40%. We test the practical performance of a scaled-up system in Thuwal, Saudi Arabia over 35 days across two seasons. The system produces 2.0–3.0 L m−2 per day of freshwater during the summer and 1.0–2.8 L m−2 per day of freshwater during the fall, without requiring additional maintenance. Intriguingly, we demonstrate the system’s potential for off-grid irrigation by successfully growing cabbage plants using atmospheric water. This passive SAWE system, harnessing solar energy to continuously extract moisture from air for drinking and irrigation, offers a promising solution to address the intertwined challenges of energy, water, and food supply, particularly for remote and water-scarce regions.

Abstract One-dimensional (1D) olivine iron phosphate (FePO4) is widely proposed for electrochemical lithium (Li) extraction from dilute water sources, however, significant variations in Li selectivity were observed for particles with different physical attributes. Understanding how particle features influence Li and sodium (Na) co-intercalation is crucial for system design and enhancing Li selectivity. Here, we investigate a series of FePO4 particles with various features and revealed the importance of harnessing kinetic and chemo-mechanical barrier difference between lithiation and sodiation to promote selectivity. The thermodynamic preference of FePO4 provides baseline of selectivity while the particle features are critical to induce different kinetic pathways and barriers, resulting in different Li to Na selectivity from 6.2 × 102 to 2.3 × 104. Importantly, we categorize the FePO4 particles into two groups based on their distinctly paired phase evolutions upon lithiation and sodiation, and generate quantitative correlation maps among Li preference, morphological features, and electrochemical properties. By selecting FePO4 particles with specific features, we demonstrate fast (636 mA/g) Li extraction from a high Li source (1: 100 Li to Na) with (96.6 ± 0.2)% purity, and high selectivity (2.3 × 104) from a low Li source (1: 1000 Li to Na) with (95.8 ± 0.3)% purity in a single step.

Abstract Two-dimensional (2D) covalent organic frameworks (COFs) and their derivatives have been widely applied as electrocatalysts owing to their unique nanoscale pore configurations, stable periodic structures, abundant coordination sites and high surface area. This work aims to construct a non-thermodynamically stable Pt-N2 coordination active site by electrochemically modifying platinum (Pt) single atoms into a fully conjugated 2D COF as conductive agent-free and pyrolysis-free electrocatalyst for the hydrogen evolution reaction (HER). In addition to maximizing atomic utilization, single-atom catalysts with definite structures can be used to investigate catalytic mechanisms and structure-activity relationships. In this work, in-situ characterizations and theoretical calculations reveal that a nitrogen-rich graphene analogue COF not only exhibits a favorable metal-support effect for Pt, adjusting the binding energy between Pt sites to H* intermediates by forming unique Pt-N2 instead of the typical Pt-N4 coordination environment, but also enhances electron transport ability and structural stability, showing both conductivity and stability in acidic environments.

Abstract Efficiently capturing radioactive methyl iodide (CH3I), present at low concentrations in the high-temperature off-gas of nuclear facilities, poses a significant challenge. Here we present two strategies for CH3I adsorption at elevated temperatures using a unified azolate-based metal-organic framework, MFU-4l. The primary strategy leverages counter anions in MFU-4l as nucleophiles, engaging in metathesis reactions with CH3I. The results uncover a direct positive correlation between CH3I breakthrough uptakes and the nucleophilicity of the counter anions. Notably, the optimal variant featuring SCN- as the counter anion achieves a CH3I capacity of 0.41 g g−1 at 150 °C under 0.01 bar, surpassing all previously reported adsorbents evaluated under identical conditions. Moreover, this capacity can be easily restored through ion exchange. The secondary strategy incorporates coordinatively unsaturated Cu(I) sites into MFU-4l, enabling non-dissociative chemisorption for CH3I at 150 °C. This modified adsorbent outperforms traditional materials and can be regenerated with polar organic solvents. Beyond achieving a high CH3I adsorption capacity, our study offers profound insights into CH3I capture strategies viable for practically relevant high-temperature scenarios.

Abstract Metal–organic frameworks have drawn attention as potential catalysts owing to their unique tunable surface chemistry and accessibility. However, their application in thermal catalysis has been limited because of their instability under harsh temperatures and pressures, such as the hydrogenation of CO2 to methanol. Herein, we use a controlled two-step method to synthesize finely dispersed Cu on a zeolitic imidazolate framework-8 (ZIF-8). This catalyst suffers a series of transformations during the CO2 hydrogenation to methanol, leading to ~14 nm Cu nanoparticles encapsulated on the Zn-based MOF that are highly active (2-fold higher methanol productivity than the commercial Cu–Zn–Al catalyst), very selective (>90%), and remarkably stable for over 150 h. In situ spectroscopy, density functional theory calculations, and kinetic results reveal the preferential adsorption sites, the preferential reaction pathways, and the reverse water gas shift reaction suppression over this catalyst. The developed material is robust, easy to synthesize, and active for CO2 utilization.

Abstract Measuring the phenotypic effect of treatments on cells through imaging assays is an efficient and powerful way of studying cell biology, and requires computational methods for transforming images into quantitative data. Here, we present an improved strategy for learning representations of treatment effects from high-throughput imaging, following a causal interpretation. We use weakly supervised learning for modeling associations between images and treatments, and show that it encodes both confounding factors and phenotypic features in the learned representation. To facilitate their separation, we constructed a large training dataset with images from five different studies to maximize experimental diversity, following insights from our causal analysis. Training a model with this dataset successfully improves downstream performance, and produces a reusable convolutional network for image-based profiling, which we call Cell Painting CNN. We evaluated our strategy on three publicly available Cell Painting datasets, and observed that the Cell Painting CNN improves performance in downstream analysis up to 30% with respect to classical features, while also being more computationally efficient.

Abstract Arabidopsis thaliana serves as a model species for investigating various aspects of plant biology. However, the contribution of genomic structural variations (SVs) and their associate genes to the local adaptation of this widely distribute species remains unclear. Here, we de novo assemble chromosome-level genomes of 32 A. thaliana ecotypes and determine that variable genes expand the gene pool in different ecotypes and thus assist local adaptation. We develop a graph-based pan-genome and identify 61,332 SVs that overlap with 18,883 genes, some of which are highly involved in ecological adaptation of this species. For instance, we observe a specific 332 bp insertion in the promoter region of the HPCA1 gene in the Tibet-0 ecotype that enhances gene expression, thereby promotes adaptation to alpine environments. These findings augment our understanding of the molecular mechanisms underlying the local adaptation of A. thaliana across diverse habitats.

Abstract Tetraphenylethylene (TPE)-based ligands are appealing for constructing metal-organic frameworks (MOFs) with new functions and responsiveness. Here, we report a non-interpenetrated TPE-based scu Zr-MOF with anisotropic flexibility, that is, Zr-TCPE (H4TCPE = 1,1,2,2-tetra(4-carboxylphenyl)ethylene), remaining two anisotropic pockets. The framework flexibility is further anisotropically rigidified by installing linkers individually at specific pockets. By individually installing dicarboxylic acid L1 or L2 at pocket A or B, the framework flexibility along the b-axis or c-axis is rigidified, and the intermolecular or intramolecular motions of organic ligands are restricted, respectively. Synergistically, with dual linker installation, the flexibility is completely rigidified with the restriction of ligand motion, resulting in MOFs with enhanced stability and improved separation ability. Furthermore, in situ observation of the flipping of the phenyl ring and its rigidification process is made by 2H solid-state NMR. The anisotropic rigidification of flexibility in scu Zr-MOFs guides the directional control of ligand motion for designing stimuli-responsive emitting or efficient separation materials.

Abstract Electrochemical CO2 reduction (CO2R) is an approach to closing the carbon cycle for chemical synthesis. To date, the field has focused on the electrolysis of ambient pressure CO2. However, industrial CO2 is pressurized—in capture, transport and storage—and is often in dissolved form. Here, we find that pressurization to 50 bar steers CO2R pathways toward formate, something seen across widely-employed CO2R catalysts. By developing operando methods compatible with high pressures, including quantitative operando Raman spectroscopy, we link the high formate selectivity to increased CO2 coverage on the cathode surface. The interplay of theory and experiments validates the mechanism, and guides us to functionalize the surface of a Cu cathode with a proton-resistant layer to further the pressure-mediated selectivity effect. This work illustrates the value of industrial CO2 sources as the starting feedstock for sustainable chemical synthesis.

Abstract Nucleus- and cell-specific interrogation of individual basal forebrain (BF) cholinergic circuits is crucial for refining targets to treat comorbid chronic pain-like and depression-like behaviour. As the ventral pallidum (VP) in the BF regulates pain perception and emotions, we aim to address the role of VP-derived cholinergic circuits in hyperalgesia and depression-like behaviour in chronic pain mouse model. In male mice, VP cholinergic neurons innervate local non-cholinergic neurons and modulate downstream basolateral amygdala (BLA) neurons through nicotinic acetylcholine receptors. These cholinergic circuits are mobilized by pain-like stimuli and become hyperactive during persistent pain. Acute stimulation of VP cholinergic neurons and the VP-BLA cholinergic projection reduces pain threshold in naïve mice whereas inhibition of the circuits elevated pain threshold in pain-like states. Multi-day repetitive modulation of the VP-BLA cholinergic pathway regulates depression-like behaviour in persistent pain. Therefore, VP-derived cholinergic circuits are implicated in comorbid hyperalgesia and depression-like behaviour in chronic pain mouse model.

Glioblastoma is an immunologically cold tumour, with poor CD8 + T cell infiltration and enrichment in immunosuppressive tumour-associated myeloid cells. Here, the authors generate a bispecific lipid nanoparticle targeting CD47 and PD-L1, combined with a STING agonist, to promote anti-tumour immunity.

Conventional salt-rejection evaporators typically exhibit low evaporation rate due to large heat loss. Here, authors demonstrate a solar evaporator featuring vertically aligned mass transfer bridges that takes advantage of the conductive heat to enable optimized water transport and salt backflow.

Lithium extraction from dilute sources could help solve the lithium supply security issue. Here, the authors investigate the Li- and Na- ion co-intercalation behavior in iron phosphate electrodes and demonstrate the lithium selectivity control through intercalation kinetic manipulations.

The separation of butane isomers, raw materials in petrochemical industry, is challenging. Here the authors report the separation of n-butane and isobutane using a metal-organic framework slurry; the separation can be performed at large scale in a pilot-scale separation tower.

Copper catalysts derived from oxidized precursors typically exhibit high selectivity for CO2 electroreduction to multicarbon products, yet the influencing factors that control the selectivity need further investigation. Here, the authors reveal that the high selectivity stems from small grain size and lattice strain due to in situ reduction of precursors.

Radioactive molecular iodine (I2) and methyl iodide (CH3I) coexist in the off-gas stream of nuclear power plants at low concentrations and only few adsorbents can effectively adsorb low-concentration I2 and CH3I simultaneously. Here, the authors demonstrate simultaneous capture of I2 and CH3I at low concentrations by exploiting different adsorptive sites in a covalent organic framework.

Ruddlesden popper layered perovskites can be used in optoelectronic devices, but the understanding of their lattice strain as well as ferroelasticity is still lacking. Here, the authors find ferroelasticity in layered perovskites with layer number more than one and reveal its mechanism.

In order to understand the role of formaldehyde in living systems, real-time monitoring is required. Here the authors report a genetically encoded, reaction-based formaldehyde sensor (FAsor) that enables visualisation of formaldehyde in mammalian cells and tissues.

Inorganic perovskite nanocrystals attract lots of research attention but the origin of their photoluminescence remains debatable. Here Zhang et al. show that behavior of both CsPbBr3 and Cs4PbBr6 nanocrystals is like individual molecular fluorophores and independent of the structural dimensionalities.

Semiconducting covalent organic frameworks (COF) with conjugated structures are desired for optoelectric conversion but poor reversibility of bond forming reactions hampers the formation of crystalline structures. Here, the authors synthesise COFs with disubstituted C = C linkages which enable water splitting under visible light irradiation.

Some atomically thin crystals feature crystallographic anisotropy, but demonstrations of electrical anisotropy are scarce. Here, the authors show that the electrical conductivity of few-layered GaTe along the x and y directions can be widely gate tuned up to 103, and demonstrate anisotropic non-volatile memory behavior.

At nanoscale, it is synthetically very difficult to increase the structural complexity of hollow structures. Here, the authors use a stepwise liquid templating strategy to build, assemble, and interconnect fullerene hollow nanostructures, just like the synthetic freedom one could have with pottery.

The intrinsic properties of graphene and the resulting device performance are hindered by the impurities produced during the synthesis process. Here, the authors elucidate the origin of contaminations in CVD-grown graphene and devise a strategy towards the scalable production of ultra-clean graphene with >99% clean regions and low contact resistance.

Multi-shelled nanomaterials offer interesting electrochemical properties, but have been limited in composition. Here the authors use dual templating to integrate electroactive metal chalcogenide layers with hydrogen-substituted graphdiyne, achieving electrocatalytic activity for hydrogen evolution.

The separation of C6 alkane isomers is crucial to the petroleum refining industry, but the distillation methods in place are energy intensive. Here, the authors design a series of topologically-guided zirconium-based metal-organic frameworks with optimized pore structures for efficient C6 alkane isomer separations.

Mei (Prunus mume) is a woody tree that produces ornamental blossoms which symbolize spring in East Asia. Here, Zhang et al. resequence wild and domesticated mei to reveal considerable admixture and introgression from other Prunus species and identify loci associated with floral traits.

Understanding of the structures and roles of catalyst promoters markedly lags behind the understanding of the structures and roles of catalytic sites. Here, the authors address this challenge by incorporating a single-site promoter—tin—on a TiO2 surface to enhance the catalytic activity of various metals on the TiO2 in selective hydrogenation of nitroarenes.

Capturing radioactive organic iodides from nuclear waste is important for safe nuclear energy usage, but remains a significant challenge. Here, Li and co-workers fabricate a stable metal–organic framework functionalized with tertiary amine groups that exhibits high capacities for radioactive organic iodides uptake.

Using precious noble elements as single atom metal catalysts is highly desirable and effective. Here the authors show the use of platinum atom catalysts anchored in mesoporous Al2O3for selective hydrogenation and CO oxidation that have better stability and performance compared to their nanoparticle counterparts.

Hierarchical, nanoporous graphitic membranes are synthetically challenging yet attractive materials, due to their structural integrity. Here, the authors fabricate freestanding, porous carbon membranes with single-crystal-like graphitic order which serve as water splitting electrocatalysts upon cobalt doping.

Prediction of enzyme kinetic parameters is essential for designing and optimizing enzymes for various biotechnological and industrial applications, but the limited performance of current prediction tools on diverse tasks hinders their practical applications. Here, we introduce UniKP, a unified framework based on pretrained language models for the prediction of enzyme kinetic parameters, including enzyme turnover number (kcat), Michaelis constant (Km), and catalytic efficiency (kcat / Km), from protein sequences and substrate structures. A two-layer framework derived from UniKP (EF-UniKP) has also been proposed to allow robust kcat prediction in considering environmental factors, including pH and temperature. In addition, four representative re-weighting methods are systematically explored to successfully reduce the prediction error in high-value prediction tasks. We have demonstrated the application of UniKP and EF-UniKP in several enzyme discovery and directed evolution tasks, leading to the identification of new enzymes and enzyme mutants with higher activity. UniKP is a valuable tool for deciphering the mechanisms of enzyme kinetics and enables novel insights into enzyme engineering and their industrial applications.

De novosynthesis is the primary way to tune the emission colour of lanthanide-doped upconversion nanocrystals. Here, the authors introduce post-synthetic cation exchange as a strategy to access multiple colours of luminescent nanocrystals, preserving the size and morphology of the original template.