Search

At the eastern boundary of the south Taupo Rift, the NE-striking, rift-bounding Rangipo and the ENE-striking Wahianoa active normal faults intersect. We investigate their intersection at the Upper Waikato Stream to understand the kinematics of a rift termination in an active volcanic area. The Upper Waikato Stream Fault is a previously unrecognised seismogenic source also at the eastern boundary, capable of producing aMW6.5 and up toMW7.1 earthquake if it ruptures in conjunction with the Rangipo or Wahianoa faults. We found a minimum of 12 surface-rupturing earthquakes in the last 45.16 ka on the Upper Waikato Stream Fault (mean slip-rate c. 0.5 mm/yr), and a minimum of nine surface-rupturing earthquakes in the last 133 ka on the Wahianoa Fault (mean slip-rate c. 0.2 mm/yr). Periods of highest slip-rate on these faults may coincide in time with Taupo, Ruapehu or Tongariro eruptions, but, despite their intersection, movement was not coincident across all faults. The Upper Waikato Stream Fault responded to a major Taupo Volcano eruption, the Wahianoa to a major eruptive sequence from Mt Tongariro and the Rangipo to major explosive events from Mt Ruapehu. [ABSTRACT FROM PUBLISHER]

Active fault traces are a surface expression of permanent deformation that accommodates the motion within and between adjacent tectonic plates. We present an updated national-scale model for active faulting in New Zealand, summarize the current understanding of fault kinematics in 15 tectonic domains, and undertake some brief kinematic analysis including comparison of fault slip rates with GPS velocities. The model contains 635 simplified faults with tabulated parameters of their attitude (dip and dip-direction) and kinematics (sense of movement and rake of slip vector), net slip rate and a quality code. Fault density and slip rates are, as expected, highest along the central plate boundary zone, but the model is undoubtedly incomplete, particularly in rapidly eroding mountainous areas and submarine areas with limited data. The active fault data presented are of value to a range of kinematic, active fault and seismic hazard studies. [ABSTRACT FROM AUTHOR]

The Canterbury earthquake sequence of 2010–2011 is the most significantly impacting event in New Zealand since World War II, consuming >15% of New Zealand's GDP. In Canterbury, geoscience information has contributed significantly to civil defence response management and more recently to the recovery effort coordinated through the Canterbury Earthquake Recovery Authority (CERA) and local authorities in Canterbury. The earthquakes have resulted in major social, community, education and economic disruption, and created considerable uncertainty in relation to the feasibility of land remediation in liquefaction-damaged areas. Analysis of voluminous geoscience, engineering and social science data has and will continue to underpin decisions on the appropriate time to begin infrastructure, residential and commercial rebuild and on whether building codes are appropriate to protect society from rare but potentially catastrophic events. [ABSTRACT FROM PUBLISHER]

Coastlines that trend both parallel and normal to the Hikurangi subduction margin along the Raukumara Peninsula, New Zealand, provide a globally unique situation that enables study of the coastal deformation and its spatial variance across and along the forearc. The data suggest there is margin-parallel zoning of the forearc deformation processes across the Raukumara segment of the Hikurangi margin. On forearc promontories closest to the Hikurangi trench (within 80 km), Holocene marine and fluvial terraces record localised zones of intermittent uplift driven by large coseismic events on landward-dipping nearshore reverse faults. At greater distances from the trench (>100 km), Holocene and Pleistocene coastal stratigraphy and geomorphology suggest that surface uplift occurs by a gradual mechanism: either by frequent small earthquakes or by an aseismic process. In concurrence with geophysical models, we suggest the gradual uplift of this area is most likely driven by the buoyancy of underplated sediment with a contribution from subduction of the over-thickened crust of the Hikurangi Plateau. There is an intermediate zone at c. 80-100 km from the trench that is uplifted at low to moderate rates, probably by the effects of Hikurangi Plateau subduction with some contributions from outboard upper plate faulting and inboard sediment underplating. [ABSTRACT FROM AUTHOR]

Six trenches and additional exposures have been investigated along a 23 km length of the Pahiatua section of the Wellington Fault. The sites show a consistent fault rupture record for the last four surface-faulting events along the Pahiatua section. This multi-site record of events, supported by 28 radiocarbon ages that span the last c. 4500 yr, is the most complete paleoseismic record for the Wellington Fault. From southwest to northeast, the trenches are called death-1 and -2, Hughes-2 and -1, and ebbett-2 and -1, named after local farmers. Additional data come from an exposure at the Army Depot northeast of Ebbett-1 and a stream cutting near the Death-1 trench. Earthquake events are recognised on the basis of upward terminations of faults and stratigraphic evidence (unconformities; scarp-derived colluvial deposits; "co-seismically" generated, organic, poorly sorted units; and subsequent scarp-ponded units). On this basis, evidence for the most recent surface-faulting event is recognised at all sites (i.e., between death-1 and the army depot site) and has a timing of ad 1670-1800 (150-280 cal. yr BP). The penultimate faulting event has been recognised at all six trenches and occurred between ad 690 and 1170 (780-1260 cal. yr BP). Clear evidence, and datable material associated with events III and IV, is observed only in the older records of the Ebbett-1 and Hughes trenches. Event iii is bracketed by faulting and two ages on co-seismic deposits to the interval ad 65 to 400 BC (1885-2350 cal. yr BP). Event IV is bracketed by three key ages in the Hughes-1 trench to the interval 1600-2140 BC (3550-4090 cal. yr BP). The trench-derived recurrence interval based on these four events is c. 1200 ± 110 yr, which is consistent with, though longer than, an estimate of the recurrence interval based on slip rate (5.1-6.2 mm/yr) and single-event displacement (4.5 ± 1 m), which gave a range of 820 ± 260 yr. When the current paleoseismic data for the Wellington Fault are considered together, they suggest that: (1) the last four large earthquakes along the Pahiatua section have involved rupture of the entire section; (2) these events broadly correlate with other dated paleoearthquake events along the Wellington-Hutt Valley segment and Tararua section of the fault, and the southern end of the Mohaka Fault; (3) the most recent faulting event along the Pahiatua section is somewhat younger than for the Wellington-Hutt Valley segment or Tararua section; and (4) either single or dual segment/section rupture scenarios existed along these four fault sections. [ABSTRACT FROM AUTHOR]

To understand the tectonic evolution of the southern termination of the Taupo Volcanic Zone (TVZ), New Zealand, we compare the late Quaternary structure and kinematics of the southern part of the Taupo Rift or Taupo Fault Belt (Mt Ruapehu Graben) with central parts of the rift (Ngakuru Graben), and with the South Wanganui Basin. We also investigate the differences between displacements of Pliocene and late Quaternary markers within the southern Taupo Rift. Comparison of fault displacement rates derived from displacements of late Quaternary and Pliocene markers yields a preliminary estimate of <400 000 yr for fault initiation of the majority of faults in the southern Taupo Rift. The timing of the onset of faulting in the southern TVZ appears to be younger than central parts of the TVZ and may indicate a step-wise southward propagation of the rift. Faulting also appears to be less evolved in the south than in the central parts of the Taupo Rift (thicker seismogenic crust and hence wider fault spacing), reinforcing the impression of a recent incremental propagation of the Taupo Rift to the south. The onset of faulting coincides with independent observations of the initiation of volcanism in the southern TVZ. We propose that the termination of the TVZ, geographically short of the limit of the Hikurangi margin, may only be temporary, and it is most likely to propagate southward in association with future major perturbations in the subduction margin, such as the occurrence of large ignimbrite volcanism. [ABSTRACT FROM AUTHOR]

Late Quaternary structure and kinematics at the southern termination of the Taupo Rift are investigated by means of active fault mapping and estimates of fault displacement and extension rates. Active faults in the southern Taupo Rift are normal in sense and include three major structures: the NNE-trending Mt Ruapehu Graben; the E-W to ESE-WNW-trending Ohakune-Raetihi fault set; and the NE-trending Karioi fault set. Displacements of young geomorphic features, fault plane exposures in roadcuts, and trenches across faults show that all faults are active contemporaneously. The Mt Ruapehu Graben is the southern extension of the modern (i.e., <26 ka) Taupo Rift (or Taupo Fault Belt, TFB), and has developed as a result of backarc extension related to the Hikurangi subduction margin. Geologic extension rate for the Mt Ruapehu Graben is estimated here at 2.3 ± 1.2 mm/yr. The other two structures strike almost perpendicular to the Taupo Rift terminating the Mt Ruapehu Graben to the south. The co-existence of three normal fault sets in mutual crosscutting relations and with no significant strike-slip on any of them may be related to local reorientation of the minimum principal stress axis (σ3) or to a stress tensor where |σ3| ≈ |σ2|. Complicated strains at the southern termination of the Taupo Rift are related to block rotations in the Hikurangi subduction margin. [ABSTRACT FROM AUTHOR]