Search

In nature, allostery is the principal approach for regulating cellular processes and pathways. Inspired by nature, structure-switching aptamer-based nanodevices are widely used in artificial biotechnologies. However, the canonical aptamer structures in the nanodevices usually adopt a duplex form, which limits the flexibility and controllability. Here, a new regulating strategy based on a clamp-like triplex aptamer structure (CLTAS) was proposed for switching DNA polymerase activity via conformational changes. It was demonstrated that the polymerase activity could be regulated by either adjusting structure parameters or dynamic reactions including strand displacement or enzymatic digestion. Compared with the duplex aptamer structure, the CLTAS possesses programmability, excellent affinity and high discrimination efficiency. The CLTAS was successfully applied to distinguish single-base mismatches. The strategy expands the application scope of triplex structures and shows potential in biosensing and programmable nanomachines.

Reverse transcription is an essential initial step in the analysis of RNA for most PCR-based amplification and detection methods. Despite advancements in these technologies, efficient conversion of RNAs that form stable secondary structures and double-stranded RNA targets remains challenging as retroviral-derived reverse transcriptases are often not sufficiently thermostable to catalyze synthesis at temperatures high enough to completely relax these structures. Here we describe the engineering and improvement of a thermostable viral family A polymerase with inherent reverse transcriptase activity for use in RT-PCR. Using the 3173 PyroPhage polymerase, previously identified from hot spring metagenomic sampling, and additional thermostable orthologs as a source of natural diversity, we used gene shuffling for library generation and screened for novel variants that retain high thermostability and display elevated reverse transcriptase activity. We then created a fusion enzyme between a high-performing variant polymerase and the 5′→3′ nuclease domain of Taq DNA polymerase that provided compatibility with probe-based detection chemistries and enabled highly sensitive detection of structured RNA targets. This technology enables a flexible single-enzyme RT-PCR system that has several advantages compared with standard heat-labile reverse transcription methods.

Cells maintain a fine-tuned, dynamic concentration balance in the pool of deoxyribonucleoside 5′-triphosphates (dNTPs). This balance is essential for physiological processes including cell cycle control or antiviral defense. Its perturbation results in increased mutation frequencies, replication arrest and may promote cancer development. An easily accessible and relatively high-throughput method would greatly accelerate the exploration of the diversified consequences of dNTP imbalances. The dNTP incorporation based, fluorescent TaqMan-like assay published by Wilson et al. has the aforementioned advantages over mass spectrometry, radioactive or chromatography based dNTP quantification methods. Nevertheless, the assay failed to produce reliable data in several biological samples. Therefore, we applied enzyme kinetics analysis on the fluorescent dNTP incorporation curves and found that the Taq polymerase exhibits a dNTP independent exonuclease activity that decouples signal generation from dNTP incorporation. Furthermore, we found that both polymerization and exonuclease activities are unpredictably inhibited by the sample matrix. To resolve these issues, we established a kinetics based data analysis method which identifies the signal generated by dNTP incorporation. We automated the analysis process in the nucleoTIDY software which enables even the inexperienced user to calculate the final and accurate dNTP amounts in a 96-well-plate setup within minutes.

As Cpf1 cleaves double-stranded DNA in a staggered way, it can be used in DNA assembly. However, the Cpf1 cleavage was found to be inaccurate, which may cause errors in DNA assembly. Here, the Cpf1 cleavage sites were precisely characterized, where the cleavage site on the target strand was around the 22nd base relative to the protospacer adjacent motif site, but the cleavage on the non-target strand was affected by the spacer length. When the spacer length was 20 nt or longer, Cpf1 mainly cleaved around the 14th and the 18th bases on the non-target strand; otherwise, with a shorter spacer (i.e. 17–19 nt), Cpf1 mainly cleaved after the 14th base, generating 8-nt sticky ends. With this finding, Cpf1 with a 17-nt spacer crRNA were employed for in vitro substitution of the actII-orf4 promoter in the actinorhodin biosynthetic cluster with a constitutively expressing promoter. The engineered cluster yielded more actinorhodin and produced actinorhodin from an earlier phase. Moreover, Taq DNA ligase was further employed to increase both the ligation efficiency and the ligation accuracy of the method. We expect this CCTL (Cpf1-assisted Cutting and Taq DNA ligase-mediated Ligation) method can be widely used in in vitro editing of large DNA constructs.

The t(14;18) translocation in follicular lymphoma is one of the most common chromosomal translocations. Most breaks on chromosome 18 are located at the 3'-UTR of the BCL2 gene and are mainly clustered in the major breakpoint region (MBR). Recently, we found that the BCL2 MBR has a non-B DNA character in genomic DNA. Here, we show that single-stranded DNA modeled from the template strand of the BCL2 MBR, forms secondary structures that migrate faster on native PAGE in the presence of potassium, due to the formation of intramolecular G-quadruplexes. Circular dichroism shows evidence for a parallel orientation for G-quadruplex structures in the template strand of the BCL2 MBR. Mutagenesis and the DMS modification assay confirm the presence of three guanine tetrads in the structure. 1H nuclear magnetic resonance studies further confirm the formation of an intramolecular G-quadruplex and a representative model has been built based on all of the experimental evidence. We also provide data consistent with the possible formation of a G-quadruplex structure at the BCL2 MBR within mammalian cells. In summary, these important features could contribute to the single-stranded character at the BCL2 MBR, thereby contributing to chromosomal fragility.

To develop structural modifications of dNTPs that are compatible with Taq DNA polymerase activity, we synthesized eight dUTP derivatives conjugated with Cy3 or Cy5 dye analogues that differed in charge and charge distribution throughout the fluorophore. These dUTP derivatives and commercial Cy3− and Cy5-dUTP were studied in Taq polymerase-dependent polymerase chain reactions (PCRs) and in primer extension reactions using model templates containing one, two and three adjacent adenine nucleotides. The relative amounts of amplified DNA and the kinetic parameters Km and Vmax characterizing the incorporation of labelled dUMPs have been estimated using fluorescence measurements and analysed. The dUTPs labelled with electroneutral zwitterionic analogues of Cy3 or Cy5 fluorophores were used by Taq polymerase approximately one order of magnitude more effectively than the dUTPs labelled with negatively charged analogues of Cy3 or Cy5. The nucleotidyl transferase activity of Taq polymerase was also observed and resulted in the addition of dUMPs labelled with electroneutral or positively charged fluorophores to the 3′ ends of DNA. The introduction of mutually compensating charges into fluorophores or other functional groups conjugated to dNTPs can be considered a basis for the creation of PCR-compatible modified nucleoside triphosphates.

Despite being plagued by heavily degraded DNA in palaeontological remains, most studies addressing the state of DNA degradation have been limited to types of damage which do not pose a hindrance to Taq polymerase during PCR. Application of serial qPCR to the two fractions obtained during extraction (demineralization and protein digest) from six permafrost mammoth bones and one partially degraded modern elephant bone has enabled further insight into the changes which endogenous DNA is subjected to during diagenesis. We show here that both fractions exhibit individual qualities in terms of the prevailing type of DNA (i.e. mitochondrial versus nuclear DNA) as well as the extent of damage, and in addition observed a highly variable ratio of mitochondrial to nuclear DNA among the six mammoth samples. While there is evidence suggesting that mitochondrial DNA is better preserved than nuclear DNA in ancient permafrost samples, we find the initial DNA concentration in the bone tissue to be as relevant for the total accessible mitochondrial DNA as the extent of DNA degradation post-mortem. We also evaluate the general applicability of indirect measures of preservation such as amino-acid racemization, bone crystallinity index and thermal age to these exceptionally well-preserved samples.

For many years, Taq polymerase has served as the stalwart enzyme in the PCR amplification of DNA. However, a major limitation of Taq is its inability to amplify damaged DNA, thereby restricting its usefulness in forensic applications. In contrast, Y-family DNA polymerases, such as Dpo4 from Sulfolobus solfataricus, can traverse a wide variety of DNA lesions. Here, we report the identification and characterization of five novel thermostable Dpo4-like enzymes from Acidianus infernus, Sulfolobus shibatae, Sulfolobus tengchongensis, Stygiolobus azoricus and Sulfurisphaera ohwakuensis, as well as two recombinant chimeras that have enhanced enzymatic properties compared with the naturally occurring polymerases. The Dpo4-like polymerases are moderately processive, can substitute for Taq in PCR and can bypass DNA lesions that normally block Taq. Such properties make the Dpo4-like enzymes ideally suited for the PCR amplification of damaged DNA samples. Indeed, by using a blend of Taq and Dpo4-like enzymes, we obtained a PCR amplicon from ultraviolet-irradiated DNA that was largely unamplifyable with Taq alone. The inclusion of thermostable Dpo4-like polymerases in PCRs, therefore, augments the recovery and analysis of lesion-containing DNA samples, such as those commonly found in forensic or ancient DNA molecular applications.

Mechanisms that allow replicative DNA polymerases to attain high processivity are often specific to a given polymerase and cannot be generalized to others. Here we report a protein engineering-based approach to significantly improve the processivity of DNA polymerases by covalently linking the polymerase domain to a sequence non-specific dsDNA binding protein. Using Sso7d from Sulfolobus solfataricus as the DNA binding protein, we demonstrate that the processivity of both family A and family B polymerases can be significantly enhanced. By introducing point mutations in Sso7d, we show that the dsDNA binding property of Sso7d is essential for the enhancement. We present evidence supporting two novel conclusions. First, the fusion of a heterologous dsDNA binding protein to a polymerase can increase processivity without compromising catalytic activity and enzyme stability. Second, polymerase processivity is limiting for the efficiency of PCR, such that the fusion enzymes exhibit profound advantages over unmodified enzymes in PCR applications. This technology has the potential to broadly improve the performance of nucleic acid modifying enzymes.

As the next step towards generating a synthetic biology from artificial genetic information systems, we have examined variants of HIV reverse transcriptase (RT) for their ability to synthesize duplex DNA incorporating the non-standard base pair between 2,4-diaminopyrimidine (pyDAD), a pyrimidine presenting a hydrogen bond ‘donor–acceptor–donor’ pattern to the complementary base, and xanthine (puADA), a purine presenting a hydrogen bond ‘acceptor–donor–acceptor’ pattern. This base pair fits the Watson–Crick geometry, but is joined by a pattern of hydrogen bond donor and acceptor groups different from those joining the GC and AT pairs. A variant of HIV-RT where Tyr 188 is replaced by Leu, has emerged from experiments where HIV was challenged to grow in the presence of drugs targeted against the RT, such as L-697639, TIBO and nevirapine. These drugs bind at a site near, but not in, the active site. This variant accepts the pyDAD-puADA base pair significantly better than wild type HIV-RT, and we used this as a starting point. A second mutation, E478Q, was introduced into the Y188L variant, in the event that the residual nuclease activity observed is due to the RT, and not a contaminant. The doubly mutated RT incorporated the non-standard pair with sufficient fidelity that the variant could be used to amplify oligonucleotides containing pyDAD and puADA through several rounds of a polymerase chain reaction (PCR) without losing the non-standard base pair. This is the first time where DNA containing non-standard base pairs with alternative hydrogen bonding patterns has been amplified by a full PCR. This work also illustrates a research strategy that combines in clinico pre-evolution of proteins followed by rational design to obtain an enzyme that meets a particular technological specification.

DNA binding of the Type 1 DNA polymerase from Thermus aquaticus (Taq polymerase) and its Klentaq large fragment domain have been studied as a function of temperature. Equilibrium binding assays were performed from 5 to 70 degrees C using a fluorescence anisotropy assay and from 10 to 60 degrees C using isothermal titration calorimetry. In contrast to the usual behavior of thermophilic proteins at low temperatures, Taq and Klentaq bind DNA with high affinity at temperatures down to 5 degrees C. The affinity is maximal at 40-50 degrees C. The DeltaH and DeltaS of binding are highly temperature dependent, and the DeltaCp of binding is -0.7 to -0.8 kcal/mol K, for both Taq and Klentaq, with good agreement between van't Hoff and calorimetric values. Such a thermodynamic profile, however, is generally associated with sequence-specific DNA binding and not non- specific binding. Circular dichroism spectra show conformational rearrangements of both the DNA and the protein upon binding. The high DeltaCp of Taq/Klentaq DNA binding may be correlated with structure-specific binding in analogy to sequence- specific binding, or may be a general characteristic of proteins that primarily bind non-specifically to DNA. The low temperature DNA binding of Taq/Klentaq is suggested to be a general characteristic of thermophilic DNA binding proteins.

DNA polymerases are desired that incorporate modified nucleotides into DNA with diminished pausing, premature termination and infidelity. Reported here is a simple in vitro assay to screen for DNA polymerases that accept modified nucleotides based on a set of primer extension reactions. In combination with the scintillation proximity assay (SPA[trade]), this allows rapid and simple screening of enzymes for their ability to elongate oligonucleotides in the presence of unnatural nucleotides. A proof of the concept is obtained using pseudo-thymidine (psiT), the C-nucleoside analog of thymidine, as the unnatural substrate. The conformational properties of psiT arising from the carbon-carbon bond between the sugar and the base make it an interesting probe for the importance of conformational restraints in the active site of polymerases during primer elongation. From a pool of commercially available thermostable polymerases, the assay identified Taq DNA polymerase as the most suitable enzyme for the PCR amplification of oligonucleotides containing psiT. Subsequent experiments analyzing PCR performance and fidelity of Taq DNA polymerase acting on psiT are presented. This is the first time that PCR has been performed with a C-nucleoside.

DNA that encodes elements for degenerate replication events by use of artificial nucleobases offers a versatile approach to manipulating sequences for applications in biotechnology. We have designed a family of artificial nucleobases that are capable of assuming multiple hydrogen bonding orientations through internal bond rotations to provide a means for degenerate molecular recognition. Incorporation of these analogs into a single position of a PCR primer allowed for analysis of their template effects on DNA amplification catalyzed by Thermus aquaticus (Taq) DNA polymerase. All of the nucleobase surrogates have similar shapes but differ by structural alterations that influence their electronic character. These subtle distinctions were able to influence the Taq DNA polymerase dependent incorporation of the four natural deoxyribonucleotides and thus, significantly expand the molecular design possibilities for biochemically functional nucleic acid analogs.

The instability of microsatellite sequences dispersed in the genome has been linked to a deficiency in cellular mismatch repair. This phenotype has been frequently observed in various human neoplasms and is regarded as a major factor in tumorigenesis. To demonstrate alterations in microsatellite sequences, polymerase chain reaction (PCR) and electrophoretic analysis are techniques often used. However, the electrophoretic profiles of PCR-amplified microsatellite sequences have not been well characterized. Moreover, the conventional method using autoradiography has critical problems in detection characteristics and migration accuracy. We made use of fluorescence-labeled PCR and laser scanning with linear detection characteristics, so as to detect bands quantitatively. Next, we characterized Taq polymerase-dependent modification of the amplified microsatellite sequences, using artificially synthesized microsatellite alleles and we optimized the electrophoretic profiles by enzymatic modification with T4 DNA polymerase. We developed a dual fluorescence co-electrophoresis system, in which both samples derived from cancer and normal tissues are electrophoresed in the same lane, in order to minimize migration errors. These improvements remarkably facilitate precise and objective assessments of microsatellite instability. Analyzing many positive cases in cell lines and tissue specimens, we classified all the patterns of microsatellite alteration and set up new criteria for assessing microsatellite instability.

A new method for the direct detection of PCR-amplified DNA in a closed system is described. The method is based on the incorporation of energy transfer-labeled primers into the amplification product. The PCR primers contain hairpin structures on their 5'ends with donor and acceptor moieties located in close proximity on the hairpin stem. The primers are designed in such a way that a fluorescent signal is generated only when the primers are incorporated into an amplification product. A signal to background ratio of 35:1 was obtained using the hairpin primers labeled with fluorescein as a donor and 4-(4'-dimethylaminophenylazo) benzoic acid (DABCYL) as a quencher. The modified hairpin-primers do not interfere with the activity of DNA polymerase, and both thermostable Pfu and Taq polymerase can be used. This method was applied to the detection of cDNA for prostate specific antigen. The results demonstrate that the fluorescent intensity of the amplified product correlates with the amount of incorporated primers, and as few as 10 molecules of the initial template can be detected. This technology eliminates the risk of carry-over contamination, simplifies the amplification assay and opens up new possibilities for the real-time quantification of the amplified DNA over an extremely wide dynamic range.

The triphosphate of the nucleoside deoxyribosyl dihydropyrimido[4,5-c][1,2]oxazin-7-one (dP) is known to be incorporated into DNA efficiently by Taq polymerase and is a useful tool for polymerase-mediated in vitro mutagenesis. It is shown here that dP is a potent mutagen in Escherichia coli and Salmonella typhimurium . In E.coli , this deoxycytidine analog induces both GC-->AT and AT-->GC transitions. No induced transversions are observed. It is highly mutagenic in wild-type E.coli, but this is much reduced in a strain lacking thymidine kinase. Mutagenesis induced by dP is efficiently inhibited by the addition of thymidine. Partially purified thymidine kinase from E.coli catalyzes phosphorylation of dP to its 5'-monophosphate. When E.coli was grown in the presence of dP, the nucleoside analog was incorporated into its DNA. The content of dP in DNA was dependent on the concentration of dP added to the medium. The incorporation characteristics of the 5'-triphosphate of dP (dPTP) were also studied using E.coli DNA polymerase I large fragment. The results confirm that this triphosphate can be incorporated opposite A and G in the template with similar efficiencies. This indicates that dP is metabolized as a thymidine analog and that the resulting triphosphate induces a high rate of mutagenesis through replicational errors.

Here we describe template directed enzymatic synthesis of unique primers, avoiding the chemical synthesis step in primer walking. We have termed this conceptually new technique DENS (differential extension with nucleotide subsets). DENS works by selectively extending a short primer, making it a long one at the intended site only. The procedure starts with a limited initial extension of the primer (at 20-30 degrees C) in the presence of only two out of the four possible dNTPs. The primer is extended by 6-9 bases or longer at the intended priming site, which is deliberately selected, (as is the two-dNTP set), to maximize the extension length. The subsequent termination reaction at 60-65 degrees C then accepts the extended primer at the intended site, but not at alternative sites, where the initial extension (if any) is generally much shorter. DENS allows the use of primers as long as 8mers (degenerate in two positions) which prime much more strongly than modular primers involving 5-7mers and which (unlike the latter) can be used with thermostable polymerases, thus allowing cycle-sequencing with dye-terminators compatible with Taq DNA polymerase, as well as making double-stranded DNA sequencing more robust.

Triple helix-forming oligonucleotides covalently linked to psoralen can be specifically cross-linked to both strands of DNA at the triplex-duplex junction following UV irradiation. We have previously shown that a 15mer psoralen-oligonucleotide conjugate forming a triple helix on the promoter of the alpha subunit gene of the interleukin-2 receptor inhibits transcription of reporter plasmids transfected into living cells after irradiation. In the present work, we directly demonstrate covalent triple helix formation at the target site inside cells. A primer extension assay using Taq polymerase was developed to quantitate the DNA which had reacted with the psoralen of the triple helix-forming oligonucleotide. Photoaddition of the psoralen at the DNA target site was demonstrated, not only when the preformed triplex was electroporated inside cells, but also when the oligonucleotide was added to the culture medium after plasmid electroporation and before irradiation of the cells.

The replication fidelities of Pfu, Taq, Vent, Deep Vent and UlTma DNA polymerases were compared using a PCR-based forward mutation assay. Average error rates (mutation frequency/bp/duplication) increased as follows: Pfu (1.3 x 10(-6)) < Deep Vent (2.7 x 10(-6)) < Vent (2.8 x 10(-6)) < Taq (8.0 x 10(-6)) < < exo- Pfu and UlTma (approximately 5 x 10(-5)). Buffer optimization experiments indicated that Pfu fidelity was highest in the presence of 2-3 mM MgSO4 and 100-300 microM each dNTP and at pH 8.5-9.1. Under these conditions, the error rate of exo- Pfu was approximately 40-fold higher (5 x 10(-5)) than the error rate of Pfu. As the reaction pH was raised from pH 8 to 9, the error rate of Pfu decreased approximately 2-fold, while the error rate of exo- Pfu increased approximately 9-fold. An increase in error rate with pH has also been noted for the exonuclease-deficient DNA polymerases Taq and exo- Klenow, suggesting that the parameters which influence replication error rates may be similar in pol l- and alpha-like polymerases. Finally, the fidelity of 'long PCR' DNA polymerase mixtures was examined. The error rates of a Taq/Pfu DNA polymerase mixture and a Klentaq/Pfu DNA polymerase mixture were found to be less than the error rate of Taq DNA polymerase, but approximately 3-4-fold higher than the error rate of Pfu DNA polymerase.

We examined PCR in silicon dioxide-coated silicon-glass chips (12 microl in volume with a surface to volume ratio of approximately 17.5 mm(2)/microl) using two PCR reagent systems: (i) the conventional reagent system using Taq DNA polymerase; (ii) the hot-start reagent system based on a mixture of TaqStart antibody and Taq DNA polymerase. Quantitative results obtained from capillary electrophoresis for the expected amplification products showed that amplification in microchips was reproducible (between batch coefficient of variation 7.71%) and provided excellent yields. We also used the chip for PCR directly from isolated intact human lymphocytes. The amplification results were comparable with those obtained using extracted human genomic DNA. This investigation is fundamental to the integration of sample preparation, polynucleotide amplification and amplicate detection on a microchip.

Several gene transfer techniques that employ 'naked DNA' molecules have recently been developed and numerous gene therapy protocols that make use of 'naked-DNA' have been proposed. We studied the possibility of enhancing the stability of 'naked DNA vectors' and thus also gene transfer and expression efficiencies, by constructing phosphorothioate (PS-) double strand DNA molecules and functional transcription units. We first synthesized short PS-double strand DNA molecules by the annealing of two complementary, 35 nt long, oligonucleotides. The accessibility of DNA modifying enzymes to this molecule was significantly decreased: T4-ligase and kinase activity were respectively reduced up to 1/2 and to 1/6, as compared to the normal phosphodiester molecule. Nucleolytic stability was increased either to purified enzymes (DNase I and Bal31) or to incubations in fresh serum, cell culture medium or in muscle protein extract. Phosphorothioate end-capped complete eukaryotic transcription units (obtained by Taq polymerase amplification with PS-primers) were not significantly protected from nucleolytic attack. On the contrary, synthetic transcription units, 'mini genes', obtained by Taq amplification with 1, 2 or 3 PS-dNTP substitutions, were resistant to DNase I and Bal31 nucleolytic activity. Transcription efficiency, driven by the T7 promoter, was 96.5, 95 and 33.5% (respectively with 1, 2 or 3 substitutions), as compared to the normal phosphodiester molecules.

The polymerase chain reaction (PCR) represents an alternative to the current methods for investigating DNA damage and repair in specific genomic segments. In theory, any DNA lesion which blocks Taq polymerase can be measured by this assay. We used quantitative PCR (QPCR) to determine the lesion frequencies produced by cisplatin and ultraviolet light (UV) in a 2.3 kilobase (kb) segment of mitochondrial DNA and a 2.6 kb segment of the DHFR gene in mouse leukemia L1210 cells. The frequency of UV-induced lesions increased linearly with dose, and was 0.58 lesions/10 kb/10 J/m2 in the mitochondrial DNA, and 0.37 lesions/10 kb/10 J/m2 in the DHFR gene. With cisplatin, the lesion frequency also increased linearly with dose, and was 0.17 lesions/10 kb/10 microM in the DHFR gene, and 0.07 lesions/10 kb/10 microM in mitochondrial DNA. This result is contrary to that of Murata et al., 1990 (1), in which mitochondrial DNA received greater cisplatin damage than did nuclear DNA. Using PCR to measure the repair of UV-induced lesions in the DHFR gene segment, we observed that less than 10% of the lesions were removed by 4 h, but over 70% of the lesions were removed by 8 h. Repair of 43% of UV-induced lesions in mitochondrial DNA was also observed during a 24 h period.

Thermus aquaticus (Taq) DNA polymerase was used to measure the extension efficiency for all configurations of matched and mismatched base pairs at template-primer 3'-termini. The transition mispairs, A(primer).C, C.A, G.T, and T.G were extended 10(-3) to 10(-4)-fold less efficiently than their correctly paired counterparts. Relative efficiencies for extending transversion mispairs were 10(-4) to 10(-5) for T.C and T.T, about 10(-6) for A.A, and less than 10(-6) for G.A, A.G, G.G and C.C. The transversion mispair C(primer).T was extended with high efficiency, about 10(-2) compared to a correct A.T basepair. The unexpected ease of extending the C.T mismatch was not likely to have been caused by primer-template misalignment. Taq polymerase was observed to bind with similar affinities to each of the correctly paired and mispaired primer-template 3'-ends. Thus, the failure of Taq polymerase to extend mismatches efficiently appears to be an intrinsic property of the enzyme and not due to an inability to bind to 3'-terminal mispairs. For almost all of the mispairs, C.T being the exception, Taq polymerase exhibits about 100 to 1000-fold greater discrimination against mismatch extension compared to avian myeloblastosis reverse transcriptase and HIV-1 reverse transcriptase which extend most mismatched basepairs permissively. Relative mismatch extension efficiencies for Taq polymerase were measured at 45 degrees C, 55 degrees C and 70 degrees C and found to be independent of temperature. The mispair extension data should be important in designing experiments using PCR to distinguish between sequences that vary by a single nucleotide.

We demonstrate that the DNA polymerase isolated from Thermococcus litoralis (VentTM DNA polymerase) is the first thermostable DNA polymerase reported having a 3′—5′ proofreading exonuclease activity. This facilitates a highly accurate DNA synthesis in vitro by the polymerase. Mutational frequencies observed in the base substitution fidelity assays were in the range of 30×10−6. These values were 5–10 times lower compared to other thermostable DNA polymerases lacking the proofreading activity. All classes of DNA polymerase errors (transitions, transversions, frameshift mutations) were assayed using the forward mutational assay (1). The mutation frequencies of Thermococcus litoralis DNA polymerase varied between 15−35×10−4 being 2 – 4 times lower than the respective values obtained using enzymes without proofreading activity. We also noticed that the fidelity of the DNA polymerase from Thermococcus litoralis responds to changes in dNTP concentration, units of enzyme used per one reaction and the concentration of MgSO4 relative to the total concentration of dNTPs present in the reaction. The high fidelity DNA synthesis In vitro by Thermococcus litoralis DNA polymerase provides good possibilities for maintaining the genetic information of original target DNA sequences intact in the DNA amplification applications.

DNA synthesis fidelities of two thermostable DNA polymerases, Thermus aquaticus (Taq) and Thermococcus litoralis (Tli, also known as Vent), and a non-thermostable enzyme, a modified T7 DNA polymerase (Sequenase), were determined by analyzing polymerase chain reaction (PCR) products using denaturing gradient gel electrophoresis (DGGE). The error rates were 4.4, 8.9, and 2.4 x 10(-5) errors/bp for modified T7, Taq, and Tli polymerase, respectively. Reducing the nucleotide triphosphate concentration for Tli polymerase during PCR did not alter the fidelity. The ability of DGGE to detect a mutant present at several percent in a wild type population is related to the polymerase fidelity. To examine the sensitivity of mutant detection, human genomic DNA containing a 1% fraction of a known base pair substitution mutant was PCR-amplified with the three enzymes using primers that flank the mutant sequence. The PCR products were analyzed by DGGE. The signal from the mutant present at 1% was visible in the samples amplified with modified T7 and Tli polymerase, but the higher error rate of Taq polymerase did not permit visualization of the signal in DNA amplified with Taq polymerase.

Every bulky lesion in DNA can potentially inhibit the Taq DNA polymerase and thereby decrease the amplification produced in the polymerase chain reaction. We investigated the feasibility of using this inhibition to quantify DNA lesions produced by the anticancer drug cisplatin. Products were detected by electrophoresis followed by ethidium bromide staining. Quantitation was obtained by including [32P]dCTP in the amplification reaction and subsequently assessing the incorporated radioactivity. Hamster genomic DNA was platinated in vitro to defined levels and amplified with primers that produce either a 150, 750 or 2,000 base pair fragment. The degree of inhibition of PCR agreed with the predicted level of DNA platination in each size of fragment, suggesting that the polymerase was inhibited by every cisplatin-induced lesion. This method was used to detect cisplatin-induced lesions in the adenine phosphoribosyltransferase gene of CHO cells. Cells were incubated with 0-125 microM cisplatin for 2 h, the DNA was purified and subjected to PCR. A significant decrease in amplification of the 2 kbp fragment was observed in DNA from cells incubated with cisplatin at 75 microM. The degree of inhibition agreed closely with the amount of DNA damage in the overall genome as measured by atomic absorption. No change was detected in amplification of the 150 base fragment which can therefore be used to normalize data for any variations between DNA samples. This assay has the same sensitivity as other methods currently used for the analysis of gene-specific damage. The advantage of this assay is that it obviates the need for specific endonuclease complexes to recognize and cleave DNA adducts as previously required when analyzing damage in specific genomic sequences.

We have developed an effective post-PCR sterilization process and have applied the procedure to a diagnostic assay for HIV-1. The method, which is based on isopsoralen photochemistry, satisfies both the inactivation and hybridization requirements of a practical sterilization process. The key feature of the technique is the use of isopsoralen compounds which form covalent photochemical adducts with DNA. These covalent adducts prevent subsequent extension of previously amplified sequences (amplicons) by Taq polymerase. Isopsoralens have minimal inhibitory effect on the PCR, are activated by long wavelength ultraviolet light, provide sufficient numbers of covalent adducts to impart effective sterilization, modify the amplified sequence such that it remains single-stranded, and have little effect on subsequent hybridization. The sterilization procedure can be applied to a closed system and is suitable for use with commonly used detection formats. The photochemical sterilization protocol we have devised is an effective and pragmatic method for eliminating the amplicon carryover problem associated with the PCR. While the work described here is limited to HIV-1, proper use of the technique will relieve the concern associated with carryover for a wide variety of amplicons, especially in the clinical setting.

A polymerase stop assay has been developed to determine the DNA nucleotide sequence specificity of covalent modification by antineoplastic agents using the thermostable DNA polymerase from Thermus aquaticus and synthetic labelled primers. The products of linear amplification are run on sequencing gels to reveal the sites of covalent drug binding. The method has been studied in detail for a number of agents including nitrogen mustards, platinum analogues and mitomycin C, and the sequence specificities obtained accord with those obtained by other procedures. The assay is advantageous in that it is not limited to a single type of DNA lesion (as in the piperidine cleavage assay for guanine-N7 alkylation), does not require a strand breakage step, and is more sensitive than other primer extension procedures which have only one cycle of polymerization. In particular the method has considerable potential for examining the sequence selectivity of damage and repair in single copy gene sequences in genomic DNA from cells.

A new procedure has been developed for the efficient cloning of complex PCR mixtures, resulting in libraries exclusively consisting of recombinant clones. Recombinants are generated between PCR products and a PCR-amplified plasmid vector. The procedure does not require the use of restriction enzymes, T4 DNA ligase or alkaline phosphatase. The 5'-ends of the primers used to generate the cloneable PCR fragments contain an additional 12 nucleotide (nt) sequence lacking dCMP. As a result, the amplification products include 12-nt sequences lacking dGMP at their 3'-ends. The 3'-terminal sequence can be removed by the action of the (3'----5') exonuclease activity of T4 DNA polymerase in the presence of dGTP, leading to fragments with 5'-extending single-stranded (ss) tails of a defined sequence and length. Similarly, the entire plasmid vector is amplified with primers homologous to sequences in the multiple cloning site. The vector oligos have additional 12-nt tails complementary to the tails used for fragment amplification, permitting the creation of ss-ends with T4 DNA polymerase in the presence of dCTP. Circularization can occur between vector molecules and PCR fragments as mediated by the 12-nt cohesive ends, but not in mixtures lacking insert fragments. The resulting circular recombinant molecules do not require in vitro ligation for efficient bacterial transformation. We have applied the procedure for the cloning of inter-ALU fragments from hybrid cell-lines and human cosmid clones.

Thermus aquaticus DNA polymerase was shown to contain an associated 5' to 3' exonuclease activity. Both polymerase and exonuclease activities cosedimented with a molecular weight of 72,000 during sucrose gradient centrifugation. Using a novel in situ activity gel procedure to simultaneously detect these two activities, we observed both DNA polymerase and exonuclease in a single band following either nondenaturing or denaturing polyacrylamide gel electrophoresis: therefore, DNA polymerase and exonuclease activities reside in the same polypeptide. As determined by SDS-polyacrylamide gel electrophoresis this enzyme has an apparent molecular weight of 92,000. The exonuclease requires a divalent cation (MgCl2 or MnCl2), has a pH optimum of 9.0 and excises primarily deoxyribonucleoside 5'-monophosphate from double-stranded DNA. Neither heat denatured DNA nor the free oligonucleotide (24-mer) were efficient substrates for exonuclease activity. The rate of hydrolysis of a 5'-phosphorylated oligonucleotide (24-mer) annealed to M13mp2 DNA was about twofold faster than the same substrate containing a 5'-hydroxylated residue. Hydrolysis of a 5'-terminal residue from a nick was preferred threefold over the same 5'-end of duplex DNA. The 5' to 3' exonuclease activity appeared to function coordinately with the DNA polymerase to facilitate a nick translational DNA synthesis reaction.

The proximal 5'-flanking region of the human platelet-derived growth factor A (PDGF-A) promoter contains one nuclease hypersensitive element (NHE) that is critical for PDGF-A gene transcription. On the basis of circular dichroism (CD) and electrophoretic mobility shift assay (EMSA), we have shown that the guanine-rich (G-rich) strand of the DNA in this region can form stable intramolecular parallel G-quadruplexes under physiological conditions. A Taq polymerase stop assay has shown that the G-rich strand of the NHE can form two major G-quadruplex structures, which are in dynamic equilibrium and differentially stabilized by three G-quadruplex-interactive drugs. One major parallel G-quadruplex structure of the G-rich strand DNA of NHE was identified by CD and dimethyl sulfate (DMS) footprinting. Surprisingly, CD spectroscopy shows a stable parallel G-quadruplex structure formed within the duplex DNA of the NHE at temperatures up to 100 degrees C. This structure has been characterized by DMS footprinting in the double-stranded DNA of the NHE. In transfection experiments, 10 microM TMPyP4 reduced the activity of the basal promoter of PDGF-A approximately 40%, relative to the control. On the basis of these results, we have established that ligand-mediated stabilization of G-quadruplex structures within the PDGF-A NHE can silence PDGF-A expression.

Bisulfite sequencing is a key methodology in epigenetics. However, the standard workflow of bisulfite sequencing involves heat and strongly basic conditions to convert the intermediary product 5,6-dihydrouridine-6-sulfonate (dhU6S) (generated by reaction of bisulfite with deoxycytidine (dC)) to uracil (dU). These harsh conditions generally lead to sample loss and DNA damage while milder conditions may result in incomplete conversion of intermediates to uracil. Both can lead to poor recovery of bisulfite-treated DNA by the polymerase chain reaction (PCR) as either damaged DNA and/or intermediates of bisulfite treatment are poor substrate for standard DNA polymerases. Here we describe an engineered DNA polymerase (5D4) with an enhanced ability to replicate and PCR amplify bisulfite-treated DNA due to an ability to bypass both DNA lesions and bisulfite intermediates, allowing significantly milder conversion conditions and increased sensitivity in the PCR amplification of bisulfite-treated DNA. Incorporation of the 5D4 DNA polymerase into the bisulfite sequencing workflow thus promises significant sensitivity and efficiency gains.

Proof-reading PCR (PR-PCR) is designed to detect known mutations within genomic DNA. It differs from standard PCR approaches in that one of the two primers has its 3' end aligned with a putative mutation site, and has its 3'-OH replaced by a blocking group. Distinguishing a mutant gene from wild-type depends upon preferential removal of the blocked 3' terminal nucleotide by the polymerase proof-reading activity when it is mismatched with the template. Preferential removal of the blocked nucleotide allows subsequent extension and selective amplification, and provides the basis for distinguishing mutant from normal genes. This method has been used here to detect a transition mutation within the P53 gene of HaCaT cells with verification by direct sequencing of the selectively amplified DNA.

The critical aspects of successful in situ amplification include fixation, permeabilization, amplification and detection. We address these aspects and present a novel detection scheme that eliminates hybridization following amplification. We use the 5'-nuclease activity of Taq polymerase to cleave in situ a 5'-reporter dye from an oligonucleotide probe which hybridizes to the target amplicon during amplification. The 5'-reporter dye is disassociated from the 3'-quenching dye and remains localized by charge interactions. In addition, we describe probe design constraints for 5'-nuclease assays both in solution and in situ. Using this technique, we show the sensitive and specific detection of HIV-1 DNA in cells lines and tissue from HIV-1-infected individuals.

Although the thermophilic bacterium Thermus aquaticus grows optimally at 70 degrees C and cannot grow at moderate temperatures, its DNA polymerase I has significant activity at 20-37 degrees C. This activity is a bane to some PCRs, since it catalyzes non-specific priming. We report mutations of Klentaq (an N-terminal deletion variant) DNA polymerase that have markedly reduced activity at 37 degrees C yet retain apparently normal activity at 68 degrees C and resistance at 95 degrees C. The first four of these mutations are clustered on the outside surface of the enzyme, nowhere near the active site, but at the hinge point of a domain that has been proposed to move at each cycle of nucleotide incorporation. We show that the novel cold-sensitive mutants can provide a hot start for PCR and exhibit slightly improved fidelity.

The potential of expression analysis using cDNA microarrays to address complex problems in a wide variety of biological contexts is now being realised. A limiting factor in such analyses is often the amount of RNA required, usually tens of micrograms. To address this problem researchers have turned to methods of improving detection sensitivity, either through increasing fluorescent signal output per mRNA molecule or increasing the amount of target available for labelling by use of an amplification procedure. We present a novel DNA-based method in which an oligonucleotide is incorporated into the 3' end of cDNA during second-strand cDNA synthesis. This sequence provides an annealing site for a single complementary heel primer that directs Taq DNA polymerase amplification of cDNA following multiple cycles of denaturation, annealing and extension. The utility of this technique for transcriptome-wide screening of relative expression levels was compared to two alternative methodologies for production of labelled cDNA target, namely incorporation of fluorescent nucleotides by reverse transcriptase or the Klenow fragment. Labelled targets from two distinct mouse tissues, adult liver and kidney, were compared by hybridisation to a set of cDNA microarrays containing 6500 mouse cDNA probes. Here we demonstrate, through a dilution series of cDNA derived from 10 micro g of total RNA, that it is possible to produce datasets comparable to those produced with unamplified targets with the equivalent of 30 ng of total RNA. The utility of this technique for microarray analysis in cases where sample is limited is discussed.

Pyrophosphorolysis-activated polymerization (PAP) was initially developed to enhance the specificity of allele-specific PCR for detection of known mutations in the presence of a great excess of wild-type allele. The high specificity of PAP derives from the serial coupling of pyrophosphorolysis-mediated activation of a pyrophosphorolysis-activatable oligonucleotide (P*) followed by extension of the activated oligonucleotide. Herein, we demonstrate that genetically engineered DNA polymerases greatly improve the efficiency of PAP, making it a practical technique for detection of rare mutations. We also show that P* oligonucleotides have the novel and unexpected property of high sensitivity to mismatches throughout at least the 16 3′-terminal nucleotides. Thus, PAP constitutes a technology platform of potential utility whenever high specificity is required along the length of an oligonucleotide.

The gene- or fragment-specific detection of newly recognized deoxyribonucleic acid (DNA) base 5-hydroxymethylcytosine (5hmC) will provide insights into its critical functions in development and diseases, and is also important for screening 5hmC-rich genes as an indicator of epigenetic states, pathogenic processes and pharmacological responses. Current analytical technologies for gene-specific detection of 5hmC are heavily dependent on glucosylated 5hmC-resistant restriction endonuclease cleavage. Here, we find that boronic acid (BA) can inhibit the amplification activity of Taq DNA polymerase for replicating glucosylated 5hmC bases in template DNA by interacting with their glucose moiety. On the basis of this finding, we propose for the first time a BA-mediated polymerase chain reaction (PCR) assay for rapid and sensitive detection of gene- or fragment-specific 5hmC without restriction-assay-like sequence limitations. To optimize the BA-mediated PCR assay, we further tested BA derivatives and show that one BA derivative, 2-(2′-chlorobenzyloxy) phenylboronic acid, displays the highest inhibitory efficiency. Using the optimized assay, we demonstrate the enrichment of 5hmC in an intron region of Pax5 gene (a member of the paired box family of transcription factors) in mouse embryonic stem cells. Our work potentially opens a new way for the screening and identification of 5hmC-rich genes and for high throughput analysis of 5hmC in mammalian cells.

Phylogenetic analysis of Y-family DNA polymerases suggests that it can be subdivided into several discrete branches consisting of UmuC/DinB/Rev1/Rad30/Rad30A and Rad30B. The most diverse is the DinB family that is found in all three kingdoms of life. Searches of the complete genome of the crenarchaeon Sulfolobus solfataricus P2 reveal that it possesses a DinB homolog that has been termed DNA polymerase IV (Dpo4). We have overproduced and purified native Dpo4 protein and report here its enzymatic characterization. Dpo4 is thermostable, but can also synthesize DNA at 37 degrees C. Under these conditions, the enzyme exhibits misinsertion fidelities in the range of 8 x 10(-3) to 3 x 10(-4). Dpo4 is distributive but at high enzyme to template ratios can synthesize long stretches of DNA and can substitute for Taq polymerase in PCR. On damaged DNA templates, Dpo4 can facilitate translesion replication of an abasic site, a cis-syn thymine-thymine dimer, as well as acetyl aminofluorene adducted- and cisplatinated-guanine residues. Thus, although phylogenetically related to DinB polymerases, our studies suggest that the archaeal Dpo4 enzyme exhibits lesion-bypass properties that are, in fact, more akin to those of eukaryotic poleta.

We examined the replication fidelity of an Arg660Ser (R660S) mutant of Thermus aquaticus DNA polymerase I (Taq pol I). In a forward mutation assay, R660S showed a marked reduction in T-->C transitions, one of the most frequent errors made by the wild-type enzyme. Steady-state kinetics showed that R660S discriminates against dGTP incorporation at a template T 13-fold better than the wild-type. R660S was also 3.2-fold less efficient than the wild-type at extending a T:dG mismatch. These results indicate that R660S has enhanced fidelity during incorporation and extension, which reduces its T-->C transition frequency. Interestingly, R660S also discriminated correct from incorrect nucleotides at the incorporation step of C:dATP, A:dATP, G:dATP and C:8-OH-dGTP mispairs 28-, 6.0-, 4.1- and 6.8-fold better, respectively, than the wild-type, although it may not always be as accurate as the wild-type at the extension step. A structural model suggests that Arg660 may participate in two interactions that influence fidelity; the guanidinium group of Arg660 might interact with the incoming guanine base at the major groove and it might compete for forming another interaction with the primer terminus. Substituting Arg with Ser may eliminate or alter these interactions and destabilize the closed complex with incorrect substrates. Our data also suggest that T:dGTP and C:dATP base pairs form 'wobble' structures at the incorporation step of Taq pol I.

Scorpion primers can be used to detect PCR products in homogeneous solution. Their structure promotes a unimolecular probing mechanism. We compare their performance with that of the same probe sequence forced to act in a bimolecular manner. The data suggest that Scorpions indeed probe by a unimolecular mechanism which is faster and more efficient than the bimolecular mechanism. This mechanism is not dependent on enzymatic cleavage of the probe. A direct comparison between Scorpions, TaqMan and Molecular Beacons on a Roche LightCycler indicates that Scorpions perform better, particularly under fast cycling conditions. Development of a cystic fibrosis mutation detection assay shows that Scorpion primers are selective enough to detect single base mutations and give good sensitivity in all cases. Simultaneous detection of both normal and mutant alleles in a single reaction is possible by combining two Scorpions in a multiplex reaction. Such favourable properties of Scorpion primers should make the technology ideal in numerous applications.

We have developed and characterized an assay for G-quadruplex-interactive compounds that makes use of the fact that G-rich DNA templates present obstacles to DNA synthesis by DNA polymerases. Using Taq DNA polymerase and the G-quadruplex binding 2, 6-diamidoanthraquinone BSU-1051, we find that BSU-1051 leads to enhanced arrest of DNA synthesis in the presence of K+by stabilizing an intramolecular G-quadruplex structure formed by four repeats of either TTGGGG or TTAGGG in the template strand. The data provide additional evidence that BSU-1051 modulates telomerase activity by stabilization of telomeric G-quadruplex DNA and point to a polymerase arrest assay as a sensitive method for screening for G-quadruplex-interactive agents with potential clinical utility.

We have studied the relationship between the length of HIV-1 reverse transcriptase (RT)-mediated nucleotide polymerization and inhibitors of these reactions in cell-free RT assays performed in the presence of either of two dideoxynucleoside triphosphates (ddNTPs), i.e. AZTTP or 3TCTP, or nevirapine, a non-nucleoside RT inhibitor. These reactions employed a heterologous RNA template and three DNA oligonucleotide primers, i.e. pAR, dPR and PA, that yielded distinct full-length products of 65, 192 and 376 nt, respectively, in the absence of inhibitor. We now show that the extent of inhibition of RT activity was greatest with use of the PA primer, which normally yielded the longest reaction product, and that lesser degrees of inhibition were noted in the reactions that generated shorter products. For example, at a concentration of 5 microM AZTTP, the extent of inhibition was 75% with the PA primer but only 40% and

The polymerase chain reaction is an immensely powerful technique for identification and detection purposes. Increasingly, competitive PCR is being used as the basis for quantification. However, sequence length, melting temperature and primary sequence have all been shown to influence the efficiency of amplification in PCR systems and may therefore compromise the required equivalent co-amplification of target and mimic in competitive PCR. The work discussed here not only illustrates the need to balance length and melting temperature when designing a competitive PCR assay, but also emphasises the importance of careful examination of sequences for GC-rich domains and other sequences giving rise to stable secondary structures which could reduce the efficiency of amplification by serving as pause or termination sites. We present data confirming that under particular circumstances such localised sequence, high melting temperature regions can act as permanent termination sites, and offer an explanation for the severity of this effect which results in prevention of amplification of a DNA mimic in competitive PCR. It is also demonstrated that when Taq DNA polymerase is used in the presence of betaine or a proof reading enzyme, the effect may be reduced or eliminated.

The structure of the deoxyribonucleoside derived from N 6-methoxy-2, 6-diaminopurine (dK) was examined by NMR. The methoxyamino residue was found predominantly in the imino rather than the amino tautomer (ratio: 9:1 in DMSO). The nucleoside proved to be a potent transition mutagen in Escherichia coli , in contrast to the closely related nucleoside derived from the analogue N6-methoxyaminopurine (dZ), which was only weakly mutagenic. The 5'-triphosphate derivatives, dKTP and dZTP, were synthesized; Taq polymerase incorporated dKTP opposite both T and, less well, opposite dC in template DNA. Both analogue triphosphates produced transition mutations when added to PCR reactions. In each case, there was a large excess of AT-->GC compared to GC-->AT mutations (ratios were 15:1 for dKTP and 10:1 for dZTP). Polymerase extension times in each cycle had to be extended, consistent with a decreased rate of DNA synthesis in the presence of the analogues. This and the mutagenic ratios are discussed in terms of syn-anti inversion of the methoxyl group.

1-(2'-Deoxy-beta-d-ribofuranosyl)-3-nitropyrrole phosphate was incorporated into a DNA decamer and analyzed via matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS). The extent and composition of the various fragment peaks were compared with those in the MALDI-MS spectrum of dT4AT5. The nitropyrrole-containing oligomer proved to be more robust. Two different DNA template assays were then used to attempt to identify DNA replicating enzymes that would incorporate the corresponding triphosphate, i.e. 1-(2'-deoxy-beta-d-ribofuranosyl)-3-nitropyrrole triphosphate (dXTP). It was shown that dXTP was not incorporated by some enzymes and it inhibited others. However, DNA polymerase I Klenow fragment and avian myeloblastosis virus reverse transcriptase incorporated dXTP in place of dATP and then replicated the template overhang in the usual way. The potential of dXTP as a surrogate for dATP in DNA sequencing with MALDI-MS analysis is discussed.

5-Formyluracil (fU) is one of the thymine lesions produced by reactive oxygen radicals in DNA and its constituents. In this work, 5-formyl-2'-deoxyuridine 5'-triphosphate (fdUTP) was chemically synthesized and extensively purified by HPLC. The electron withdrawing 5-formyl group facilitated ionization of fU. Thus, p K a of the base unit of fdUTP was 8.6, significantly lower than that of parent thymine (p K a = 10.0 as dTMP). fdUTP efficiently replaced dTTP during DNA replication catalyzed by Escherichia coli DNA polymerase I (Klenow fragment), T7 DNA polymerase (3'-5'exonuclease free) and Taq DNA polymerase. fU-specific cleavage of the replication products by piperidine revealed that when incorporated as T, incorporation of fU was virtually uniform, suggesting minor sequence context effects on the incorporation frequency of fdUTP. fdUTP also replaced dCTP, but with much lower efficiency than that for dTTP. The substitution efficiency for dCTP increased with increasing pH from 7.2 to 9.0. The parallel correlation between ionization of the base unit of fdUTP (p K a = 8.6) and the substitution efficiency for dCTP strongly suggests that the base-ionized form of fdUTP is involved in mispairing with template G. These data indicate that fU can be specifically introduced into DNA as unique lesions by in vitro DNA polymerase reactions. In addition, fU is potentially mutagenic since this lesion is much more prone to form mispairing with G than parent thymine.

To develop a physical map, one often uses a large-insert library to establish a contiguous set of overlapping genomic clones (‘contig’). One of the most efficient ways to prepare contigs in limited chromosomal regions is chromosome-walking. For this approach, it is important to retrieve DNA sequences from the termini of the insert fragment to screen for overlapping clones. Many methods for the isolation of DNA insert termini have been developed: subcloning (1), inverse PCR (2), Alu-vector PCR (3), bubble-vector PCR (4), adapter-vector PCR (5), junction trapping (6), capture-PCR (7), TAIL-PCR (8) and direct sequencing of the end fragments (9). Many of these methods work well but are difficult to scale up to large numbers of end-rescue reactions. Our goal was to improve the TAIL-PCR method, such that nearly every insert end from P1-derived artificial chromosome (PAC) clones (10) can be amplified directly from bacterial suspension, thus avoiding the cost of plasmid DNA extraction. Here we present an efficient method, termed DOP-vector PCR, to amplify unknown terminal sequences from PAC clones. This technique should also be applicable to other systems, e.g. BAC or YAC clones. The basic concept is to employ a partially-degenerate oligonucleotide primer (DOP) in combination with a vector primer (Fig. 1). The partially degenerate primer 6-MW (CCGACTCGAGNNNNNNATGTGG) has been described previously (11). It has six bases specified at the 3′-end, six completely degenerate bases in the middle, and an arbitrary 10 nt sequence at the 5′-end. A single cycle of DNA synthesis is carried out at a low stringency annealing temperature in the presence of the 6-MW primer. Primer extension is catalyzed by the modified T7 DNA polymerase (Sequenase version 2.0, USB) as has been reported previously (12). Under these low stringency conditions, priming and subsequent DNA elongation probably occurs from numerous discrete sites in the PAC DNA (and the Escherichia coli DNA), which match for at least 5 or 6 nt with the 3′ terminal nucleotides of the DOP primer. For our application, it is essential to permit random priming while preventing random amplification. Therefore, only a single cycle of low stringency DNA synthesis is allowed. To selectively amplify the vector/insert junction sequences, high-stringency PCR conditions are imposed using a vector primer in combination with the DOP primer and using Taq polymerase for DNA synthesis. During the first PCR cycle, a subset of the nascent DNA strands (from the Sequenase synthesis) are used as templates for DNA synthesis primed by the vector primer. The products include, for the first time, the complementary sequence for the DOP primer, which can serve as a high stringency priming site for the 6-MW primer in subsequent PCR cycles. The specificity for junction fragments can be further enhanced by a second PCR employing a nested vector primer in combination with the DOP primer (Fig. 1D). Please note that the anticipated junction PCR fragments generated from the first PCR reaction will be truncated in the second PCR reaction with nested primers. This will result in a shifting of the PCR mobility of 73 bp for the T7 junction and 78 bp for the SP6 junction. We have employed DOP-vector PCR to attempt rescuing both ends of 125 PAC clones. From the 250 ends, 246 ends were amplified on the first attempt. After a second try for the failed ends, we succeeded in amplifying the remaining junctions using conditions identical to the first attempt. The PCR product sizes generated with Taq polymerase range from a few hundred base pairs to ∼1 kb. Among 250 PAC end fragments we used for sequencing, 72.8% of them are >600 bp; 8.8% between 500 and 599 bp; 6%, 400–499 bp; 8.8%, 300–399 bp; 2.4%, 200–299 bp; and 1.2%, 100–199 bp. Most PCR reactions result in several (two to five) distinct PCR products per end. The long-range PCR preparation ‘Expand’ from Boehringer Mannheim has also been used and results in mixtures of PCR fragments which also contain slightly larger products sizes (≤3 kb) and lacking the over-representation of the smallest PCR fragments. A sample of PCR products generated for four different PAC clones is shown in Figure 2. As can be seen, all four PAC clones generate at least one major PCR product and often more fragments of lower intensity are detectable. Most of the major and minor PCR products shift in mobility after the second PCR with the nested vector primers, consistent with the expectation that the products are derived from the vector/insert junctions. Frequently, a weak smear can be observed and most likely consist of non-specific products generated from many template locations with the partially degenerate primer. If it is the purpose to sequence the junction fragments, then the mild contamination with non-junction sequences is of no relevance since these background products will not have the capability to bind the sequencing primer. To prove that the PCR products are, indeed, derived from the vector/insert junctions, we purified the main PCR fragment from each of the 250 reactions using electrophoresis in 1% low melting point agarose. The desired bands (which demonstrated in all cases the predicted size shift) were cut out and purified with the Wizard PCR purification kit (Promega) or, in some cases, using the gelase method (Epicentre Technologies). The sequencing reactions were performed using the Taq DyeDeoxy Terminator Cycle Sequencing kit (ABI) with the nested vector primers as the sequencing primers. The results obtained with the automated DNA sequencer 373A (ABI) indicate that in all cases the vector sequences immediately adjacent to the cloning site are present in

Nucleic Acids Research, 24 (8), ISSN:1362-4962, ISSN:0301-5610