Search

A time–frequency-varying multicarrier generation scheme based on dynamic single-sideband recirculating frequency shifter is proposed and experimentally demonstrated. Through the use of two time-domain sinusoidal signals with stationary phase shift provided by a phase control module, multicarriers with flexible frequency intervals are obtained without carrier-to-noise ratio and flatness loss. We have experimentally attained multicarriers with 10-/12.5-/15-GHz carrier intervals in 3-nm bandwidth, and carriers with arbitrary intervals can be achieved when using the proposed scheme combined with a flexible wavelength selective switch.

An architecture for flattened and broad spectrum multicarriers is presented by generating 60 comb lines from pulsed laser driven by user-defined bit stream in cascade with three modulators. The proposed scheme is a cost-effective architecture for optical line terminal (OLT) in wavelength division multiplexed passive optical network (WDM-PON) system. The optical frequency comb generator consists of a pulsed laser in cascade with a phase modulator and two Mach–Zehnder modulators driven by an RF source incorporating no phase shifter, filter, or electrical amplifier. Optical frequency comb generation is deployed in the simulation environment at OLT in WDM-PON system supports 1.2-Tbps data rate. With 10-GHz frequency spacing, each frequency tone carries data signal of 20 Gbps-based differential quadrature phase shift keying (DQPSK) in downlink transmission. We adopt DQPSK-based modulation technique in the downlink transmission because it supports 2 bits per symbol, which increases the data rate in WDM-PON system. Furthermore, DQPSK format is tolerant to different types of dispersions and has a high spectral efficiency with less complex configurations. Part of the downlink power is utilized in the uplink transmission; the uplink transmission is based on intensity modulated on-off keying. Minimum power penalties have been observed with excellent eye diagrams and other transmission performances at specified bit error rates.

We present a large-core single-mode “windmill” single crystal sapphire optical fiber (SCSF) design, which exhibits single-mode operation by stripping off the higher-order modes (HOMs) while maintaining the fundamental mode. The “windmill” SCSF design was analyzed using the finite element analysis method, in which all the HOMs are leaky. The numerical simulation results show single-mode operation in the spectral range from 0.4 to 2 μm in the windmill SCSF, with an effective core diameter as large as 14 μm. Such fiber is expected to improve the performance of many of the current sapphire fiber optic sensor structures.

A new type of single crystal sapphire optical fiber (SCSF) design is proposed to reduce the number of guided modes via a highly dispersive cladding with a periodic array of high and low index regions in the azimuthal direction. The structure retains a “core” region of pure single crystal (SC) sapphire in the center of the fiber and a “cladding” region of alternating layers of air and SC sapphire in the azimuthal direction that is uniform in the radial direction. The modal characteristics and confinement losses of the fundamental mode were analyzed via the finite element method by varying the effective core diameter and the dimensions of the “windmill” shaped cladding. The simulation results showed that the number of guided modes were significantly reduced in the “windmill” fiber design, as the radial dimension of the air and SC sapphire cladding regions increase with corresponding decrease in the azimuthal dimension. It is anticipated that the “windmill” SCSF will readily improve the performance of current fiber optic sensors in the harsh environment and potentially enable those that were limited by the extremely large modal volume of unclad SCSF.

We propose a theoretical mode division multiplexing (MDM) transmission model in a few mode fibers and numerically simulate the effects of mode coupling and modal dispersion on the transmitted signal. An adaptive signal processing with multiple-input multiple-output equalizers based on recursive least squares constant modulus algorithm (CMA) is proposed and demonstrated. The simulation results show that the mode signals are equalized sufficiently with a faster convergent speed than regular CMA. The equalization algorithm presented is more adaptive to complicated channels and applicable to the MDM system.

A hierarchical modulation with multilevels is proposed for an optical single-carrier frequency division multiplexing access (SC-FDMA) system. It can mitigate the nonlinearity by reducing the peak-to-average power ratio (PAPR) of the SC-FDM signal. According to different optical signal-to-noise ratio requirements, the adaptive bit allocation can be implemented on different levels during hierarchical modulation. In the experiment, the PAPR of the hierarchical-modulated SC-FDM signal outperforms the conventional SC-FDM signal by 0.7 dB. Signals with 4- and 6-bit hierarchical modulation are successfully demodulated by the optical network unit with power penalties less than 0.2 and 0.45 dB, respectively.

This paper proposes an electrical code divided multiplexing orthogonal frequency division multiplexing (ECDM-OFDM) modulation-based radio-over-fiber (ROF) system at the 60-GHz band. Compared with conventional OFDM ROF system, it can increase the distance of wireless links as well as suppressing the optical beating interference noise in the upstream link. The 4.68 Gb/s ECDM-OFDM signal at 60 GHz with a 25-km fiber and 8-m air transmission is experimentally demonstrated. The wireless distance of the ECDM-OFDM signal has been extended 3 m with the same transmitted power. For the upstream signal, no significant receiver power penalties are observed after transmission.