Search

• Symmetrical polishing structure of dual-core photonic crystal fiber. • Gold layer is plated on the symmetrical side-polished surface of PCF to excite the surface plasmon polaritons. • The proposed sensor is able to detect the analyte the refractive indexes in the range of 1.3–1.42. • The maximum sensitivity of the proposed sensor is 8000 nm/RIU. A surface plasmon resonance (SPR) sensor based on symmetrical side-polished dual-core photonic crystal fiber (DC-PCF) with a wide refractive index (RI) detection is proposed and analyzed. A gold layer is placed on the symmetrical side-polished surface of photonic crystal fiber to excite the surface plasmon polaritons (SPPs). The proposed DC-PCF consists of the symmetrical air-holes and symmetrical side-polished structure. The design without air holes on both sides of the core can efficiently realize phase matching between the core guided mode and the plasma mode. Numerical simulation results show a maximum sensitivity as high as 8000 nm/RIU (refractive index unit) with a resolution of 1.3 × 10−5 RIU. It has a significant advantage in the field of chemical and biological detection because it is able to detect the analyte RI in the range of 1.3–1.42. [ABSTRACT FROM AUTHOR]

A high sensitivity photonic crystal fiber (PCF) temperature sensor based on surface plasmon resonance is proposed and evaluated using the finite element method. Besides, the coupling phenomenon is studied. The gold layer deposited on the polishing surface of D-shape PCF is used as the metal to stimulate surface plasma, which can improves the sensitivity. Through exquisite design, the birefringence of the fiber is improved, which makes the loss of y-polarization far greater than the loss of x-polarization. The D-shape fiber avoids filling metal and liquid into the air-holes, which can contact with fluid directly to feel temperature. When the phase matching condition is satisfied, the core mode will couple with the surface plasma mode. The resonance position of y-polarization is very sensitive to the temperature change. The simulation shows that the PCF has high sensitivity of 36.86 nm/°C in y-polarization and wide detection that from 10 °C to 85 °C. [ABSTRACT FROM AUTHOR]

A groove micro-structure optical fiber refractive index sensor with nanoscale gold film based on surface plasmon resonance (SPR) is proposed and analyzed by the finite element method (FEM). Numerical results show that the average sensitivity is 15,933 nm/refractive index unit (RIU) with the refractive index of analyte ranging from 1.40 to 1.43 and the maximum sensitivity is 28,600 nm/RIU and the resolution of the sensor is 3.50 × 10 −8 RIU. The groove micro-structure optical fiber refractive index sensor do some changes on the D-shaped fiber sensor, compared with conventional D-shaped fiber sensor, it has a higher sensitivity and it is easier to produce than the traditional SPR sensor. [ABSTRACT FROM AUTHOR]

A polarization filter is designed at two communication windows of 1310 and 1550 nm based on microstructured optical fiber. The model has four large diameter air holes and two gold-coated air holes. The influence of the geometrical parameters of the photonic crystal fiber on the performance of the polarization filter is analyzed by the finite element method. The numerical simulation shows that when the fiber length is 300 μm, the corresponding extinction ratio is 209.7 dB and 179.8 dB, the bandwidth of extinction ratio (ER) better than 20 dB is 150 nm and 350 nm at the communication wavelength of 1310 nm and 1550 nm. [ABSTRACT FROM AUTHOR]

• The sensor is capable of detecting a refractive index change of the liquid analyte ranging from 1.33 to 1.38. • The gold film and the thin layer of graphene are directly coated on the outer edge of the fiber. • After adding graphene, the average sensitivity increases from 2938.86 to 5171.51 nm/RIU. • The maximum sensitivity can reach 8600 nm/RIU. • The optical fiber can be directly immersed into the liquid analyte, so real-time detection can be realized. A novel eccentric photonic crystal fiber biosensor with gold and graphene bimetallic layers on the outer edge of the optical fiber is proposed in this paper. The effects of gold film thickness, graphene coating thickness and cladding air hole diameter on the sensor performance are analyzed in detail. The maximum sensitivity of this PCF sensor is 4657.14 nm/RIU when only gold-plated film is used, and 8600 nm/RIU after a layer of graphene is added on the gold film, the sensitivity increased by 84.66%. Compared with the traditional optical fiber sensor, this PCF sensor has the advantages of simple structure, easy manufacture and real-time detection, which will make it a potential candidate for water quality analysis, chemical detection and biomolecular detection. [ABSTRACT FROM AUTHOR]

Highlights • The proposed PCF structure is a combination of circular layout and D-shaped. • The gold film is deposited on the polishing surface, the analyte is placed on the outer layer of the D-shaped PCF. • The proposed PCF sensor is feasible for the structural parameters with fabrication tolerance of ±1%. • The proposed sensor easy to fabricate and has high sensitivity. Abstract A high sensitivity D-shaped photonic crystal fiber sensor based on surface plasmon resonance is proposed for refractive index sensing. By using finite element method, the sensing properties of the proposed sensor are investigated. The numerical results show a very high average sensitivity of 14600 nm/RIU with the high resolution of 6.80 × 10−6 RIU for refractive index (RI) of analytes ranging from 1.420 to 1.435. The layout of the air holes is designed to be circular and only two layers in this D-shaped photonic crystal fiber. The metallic gold is used as the surface plasmon resonance activity material, which is deposited on the polishing surface. The analyte is placed on the outer layer of the D-shaped photonic crystal fiber. This D-shaped photonic crystal fiber solves the difficulty of gold-plated film and fill analyte in the holes. The proposed PCF structure is a combination of circular layout and D-shaped, which also leads to the proposed sensor easy to fabricate and has considerable sensitivity. [ABSTRACT FROM AUTHOR]

Highlights • The PCF is simple, novel and easy to apply. • The filter can simultaneously achieve polarization filtering effects on the input signals of the 1310 and 1550 nm communication bands. • When the length of the PCF is 0.8 mm, the crosstalk is less than −20 dB or better than 20 dB in the 1550 and 1310 nm bands, the optical bandwidth can reach 220 and 150 nm, respectively. Abstract A photonic crystal fiber (PCF) polarization filter with dual communication bands is proposed in this paper. The polarization characteristics of the double-hole gold-coated PCF are numerically analyzed by utilizing the finite element method (FEM). As we know, the filter can achieve polarization filtering effect on input signals at 1310 nm (y-polarized mode) and 1550 nm (x-polarized mode) bands simultaneously in two orthogonal polarization states. In the above two communication bands, the confinement losses of the unwanted polarization mode can reach 192.7 dB/cm (y-polarized mode) and 427.5 dB/cm (x-polarized mode), whereas other polarization mode losses are very low. Furthermore, when the transmission length of the PCF is 800 μm, x and y polarization mode crosstalk can reach −275.4 and 126.9 dB in the 1550 and 1310 nm bands, respectively. Meanwhile, the crosstalk is less than −20 dB or better than 20 dB, the optical bandwidth can reach 220 and 150 nm, respectively. [ABSTRACT FROM AUTHOR]

A high sensitivity optical fiber Surface Plasmon Resonance (SPR) sensor which based on coreless optical fiber, silver film and graphene, has been designed and implemented for liquid concentration detection. In this paper, Graphene is firstly verified that it can be used to enhance the evanescent field of traditional optical fiber and thus increasing sensitivity in experiment. The sensitivity of proposed sensor is 6.417 nm/%, which is higher than that of the traditional optical fiber SPR sensor according to the comparative experiments. In addition, the proposed sensor is extremely easy to make and the silver film could be protected from oxidation and damage due to the existence of graphene. Moreover, the sensor has pretty small size, immunity to electromagnetic interference, quick response speed and thus can suitable a variety of severe environments and real-time measurement. [ABSTRACT FROM AUTHOR]