Search

The crystal growth, polarized spectral properties, Judd-Ofelt (JO) analysis and lifetime of Sm:CaGdAlO 4 (Sm:CGA) crystal were reported for the first time. Sm:CGA crystal with size of Φ4 × 33 mm 3 was grown by the floating zone (FZ) method. The peak absorption cross-sections at 407 nm were calculated to be 3.41 × 10 −20 cm 2 and 3.20 × 10 −20 cm 2 for the σ and π polarization, and the largest stimulated emission cross-sections at 601 nm were 5.10 × 10 −21 cm 2 and 4.66 × 10 −21 cm 2 , respectively. The absorption and emission cross-sections were several times larger than that of Sm:LiYF 4 . The JO intensity parameters of Ω 2 , Ω 4 and Ω 6 were calculated to be 3.0 × 10 −20 cm 2 , 6.1 × 10 −20 cm 2 and 6.5 × 10 −20 cm 2 , respectively. The lifetime of the 4 G 5/2 level was obtained to be 0.69 ms. All the results indicate that Sm:CGA crystal is a potential laser host for the reddish-orange laser operation. [ABSTRACT FROM AUTHOR]

The crystal growth, optical spectra and lifetime of Dy:CaGdAlO 4 crystal were investigated for the first time to our best knowledge. Single Dy:CaGdAlO 4 crystal with size of Φ4 × 40 mm 3 was grown by floating zone method. The peak absorption cross-sections were calculated to be 2.43 × 10 −21 cm 2 and 1.28 × 10 −21 cm 2 at 453 nm for σ and π polarizations. The Judd-Ofelt (JO) parameters of Ω 2 , Ω 4 and Ω 6 were calculated to be 1.8 × 10 −20 cm 2 , 1.0 × 10 −20 cm 2 and 0.5 × 10 −20 cm 2 , respectively. The emission cross-sections were calculated to be 0.51 × 10 −20 cm 2 and 0.55 × 10 −20 cm 2 for σ and π polarizations. The fluorescence decay time is 222 μs. The results indicate that the Dy:CaGdAlO 4 crystal is a potential candidate for yellow laser operation. [ABSTRACT FROM AUTHOR]

We demonstrated an efficient and controllable dual-wavelength continuous-wave (CW) laser of Nd:Lu 2 SiO 5 (Nd:LSO) crystal. The maximum output power was 3.02 W at wavelength of 1075 nm and 1079 nm, and with increasing of absorbed pump power, the ratio of 1079 nm laser rose. The slope efficiency of 65.6% and optical-to-optical conversion efficiency of 63.3% were obtained. The passively Q-switched laser properties of Nd:LSO were investigated for the first time. The shortest pulse, maximum pulse energy and peak power were 11.58 ns, 29.05 μJ and 2.34 kW, respectively. [ABSTRACT FROM AUTHOR]

Abstract: Yb3+-doped (Lu0.5Y0.5)3Al5O12 (Yb:LuYAG) single crystal has been grown by the Czochralski method. The segregation coefficient of Yb3+ was studied by the inductively coupled plasma atomic emission spectrometry (ICP-AES) method. The crystal structure has been determined by X-ray diffraction analysis. The absorption and emission spectra and fluorescence lifetime of Yb:LuYAG crystal were measured at room temperature. The spectroscopic parameters of Yb:LuYAG crystal were compared with those of Yb:YAG and Yb:LuAG crystals with the same doping level. The results indicate that Yb:LuYAG crystals are potential candidates for high-power ultrashort pulse lasers. [ABSTRACT FROM AUTHOR]

Abstract: Yb:Y3Al5O12 (Yb:YAG) single crystals with Yb doping concentration 0.5at.%, 5at.%, 15at.%, 25at.%, 50at.%, 100at.% and Yb:YAlO3 (Yb:YAP) single crystals with Yb doping concentration 0.5at.%, 5at.%, 15at.%, 30at.% were grown by the Czochralski process. The fluorescence spectra of these crystals and the effects of self-absorption on the shape of the fluorescence spectra were studied. Through comparing the fluorescence spectra of Yb:YAG and Yb:YAP, all results indicate that the effects of self-absorption on the fluorescence spectra of Yb:YAP are remarkably stronger than that of Yb:YAG at the same Yb concentration. [Copyright &y& Elsevier]

In this work, the TAG transparent ceramics doped with 0.4 wt.% TEOS and different concentration of MgO were fabricated by a reactive sintering process under vacuum sintering combined with hot isostatic pressing (HIP) treatment. The effect of MgO on the microstructure evolution and optical properties of delivered ceramics were investigated. The results showed that the TAG ceramics doped with 0.4 wt.% TEOS and 0.1 wt.% MgO exhibited the optimum optical transmittance, which can reach about 81% in the visible and near-infrared (NIR) regions. The addition of MgO inhibited the grain growth and accelerated the densification of TAG ceramic at the sintering temperature reached about 1600 °C. [ABSTRACT FROM AUTHOR]

We report comparative studies on diode-pumped eye-safe Nd:LuAG ceramic lasers at 1.4 μm spectral region in continuous-wave regime. Six differently doped samples have been used to experimentally determine the optimized laser results. A maximum output power of 1.78 W is achieved with simultaneous dual-wavelength laser emission at 1418 and 1442 nm, which is believed the highest output power of Nd:LuAG ceramic at this specific wavelength. Using a V 3+ :YAG as saturable absorber, passively Q-switched Nd:LuAG ceramic laser is also realized, for the first time to our knowledge, with maximum average output power of 0.58 W and pulse width of about 34 ns at pulse repetition rate of 11.91 kHz, which lead to pulse energy of 49.3 μJ and pulse peak power of 1.43 kW. [ABSTRACT FROM AUTHOR]

(Tb x Y 1−x ) 3 Al 5 O 12 (x = 0.2, 0.5, 0.8) transparent ceramics were synthesized by a solid-state reaction and HIP. All the samples were pre-sintered at 1650 °C for 4 h in a muffle and later HIPed at 1650 °C for 3 h. (Tb 0.2 Y 0.8 ) 3 Al 5 O 12 transparent ceramics exhibit best microstructure with an average grain size of approximately 5.22 μm and optical transmittance of over 65% in the region of 500–1600 nm. Additionally, average grain sizes of all the samples are less than 10 μm. XRD scanning patterns indicate that only the (Tb 0.8 Y 0.2 ) 3 Al 5 O 12 samples have little secondary phases. [ABSTRACT FROM AUTHOR]

In this paper, we describe a thulium-doped (Lu,Y) 3 Al 5 O 12 mixed crystal that was designed and grown to achieve a large pulse energy in Q-switched laser operation. Its absorption cross-sections at 781.3 nm and 1629.2 nm were calculated to be 3.4 × 10 −21 cm 2 and 5 × 10 −21 cm 2 , respectively, and the emission cross-section at 2018.3 nm was calculated to be 1.92 × 10 −21 cm 2 . The highest single pulse energy of 1.4 mJ near 2.02 μm was realized in an actively Q-switched solid-state laser, and further power scaling was just limited by the damage of the crystal coating. Based on the calculated spectrum parameters, theoretical simulation of the single pulse energy that considering the cross-relaxation process was proposed, which was well consistent with the experimental results. [ABSTRACT FROM AUTHOR]

Ho,Pr:CaYAlO 4 (Ho,Pr:CYA) crystal doped with 1 at.% Ho3+ and 0.1 at.% Pr3+ was successfully grown using the Czochralski method. Polarized absorption spectra, emission spectra, and fluorescence lifetime measurements were performed. The impact of Pr3+ co-doping on the ∼3 μm emission of Ho3+ ions was analyzed. The energy transfer efficiency from Ho3+:5I 7 to Pr3+:3F 2 energy level was calculated to be 60.66 %, indicating that Pr3+ effectively mitigated the self-termination effect in Ho,Pr:CYA crystals. The absorption cross-section at 645 nm was found to be 1.53 × 10−20 cm2 for σ polarization and 2.62 × 10−20 cm2 for π polarization. The emission cross-section at 2842 nm was calculated to be 0.86 × 10−20 cm2 for σ polarization and 1.33 × 10−20 cm2 for π polarization at 2908 nm, with a full width at half maximum (FWHM) of 139 nm and 88 nm, respectively. The fluorescence lifetimes of the 5I 6 and 5I 7 levels were measured to be 0.17 ms and 2.01 ms, respectively. These results collectively suggest that Ho,Pr:CYA crystals hold great potential as a candidate for 2.8 μm laser applications. • Ho3+,Pr3+ co-doped CaYAlO 4 crystal was grown by the Czochralski method. • The crystal structure, polarized absorption and emission spectra were investigated. • The intensity parameters were obtained using J-O theory. [ABSTRACT FROM AUTHOR]

Al 2 O 3 –Y 3 Al 5 O 12 :Ce (Al 2 O 3 -YAG:Ce) eutectic with weak attenuation at high temperature has a wide range of applications in high-power white light solid-state lighting. However, the general color rendering index (general CRI, R a , the average value of R 1 -R 8) of phosphor-converted white light-emitting diode (Pc-WLED) based on this material is usually no higher than 70 (CCT < 6500 K). We grew Al 2 O 3 -YAG eutectics doped with three ions of Ce3+, Pr3+, and Cr3+ by the micro pulling-down (μ-PD) method to improve the R a through the co-luminescence and energy-transfer. The co-luminescence and energy-transfer were analyzed by the excitation-emission spectrum and the spectral power distribution. Results show that the energy-transfer between Ce3+ and Pr3+ ions in Al 2 O 3 -YAG:Ce, Pr occurs with each other, visibly enhancing the emission at around 610 nm and 694 nm, increases the R a by 8.4 compared to Al 2 O 3 -YAG:Ce. Moreover, the R a of the Al 2 O 3 -YAG:Ce and Al 2 O 3 -YAG:Cr stacked Pc-WLED increases by 20.4 compared to Al 2 O 3 -YAG:Ce, reaching 78.7. In addition, (R 9 , the special CRI for strong red, is 59.). In addition, the annealed (H 2) single-doped eutectics have little change compared to unannealed ones in luminescence, but the co-doped ones with multiple ions have a significant change. Significantly, the luminous efficiency of Al 2 O 3 -YAG:Ce after annealing is only increased by 4%, while that of Al 2 O 3 -YAG:Ce, Pr is increased by 13%. These studies show that the CRI of Pc-WLED base on Al 2 O 3 -YAG:Ce eutectic can be improved by ion co-doping in eutectic or superposition of Al 2 O 3 -YAG eutectic doped with other ions. • The co-luminescence of Ce3+ and Pr3+ in Al 2 O 3 –YAG enhancing the emission of 610 nm and 694 nm, increases the R a by 8.4. • The Cr3+ in Al 2 O 3 –YAG:Ce absorbs the emission spectra of the Ce3+ but quenches the fluorescence produced by Ce3+, which seriously hinders the luminescence of Ce3+. • The R a of the Al 2 O 3 –YAG:Ce and Al 2 O 3 –YAG:Cr stacked phosphor-converted LED increases by 20.4, reaching 78.7 (R 9 = 59). • The luminous efficiency of Al 2 O 3 –YAG:Ce after annealing is only increased by 4%, while that of Al 2 O 3 -YAG:Ce, Pr is increased by 13%. • It is found that the co-doping of Pr3+ ions will increase the probability of Ce4+ in Al 2 O 3 -YAG:Ce. [ABSTRACT FROM AUTHOR]

Yb:CaYAlO 4 (Yb:CALYO) shaped crystal fibers with different Yb3+ doping concentration were successfully grown by the micro-pulling-down (μ -PD) method. The effect of the Yb3+ concentration on the structure, absorption, emission and lifetime was systematically studied. The strongest absorption peaks of Yb:CALYO crystal fibers are located at 977 nm for σ and π polarization. The micro-photoluminescence indicate that Yb3+ ions in CALYO single crystal fiber grown by the μ -PD method distributed evenly across a cross-section. The emission cross-section of 5 at.% Yb:CALYO crystal fiber was calculated to be 0.86 × 10−20 and 1.08 × 10−20 cm2 at 983 nm for σ and π polarizations. Benefited from the disordered structrure of CaYAlO 4 crystal, the full width at half maximum (FWHM) at 978 nm was 68.9 nm and 80.9 nm, respectively. The fluorescence lifetime of 2F 5/2 energy level of Yb:CALYO crystal fibers with concentration of 0.5 at.%, 1 at.%, 2 at.% and 5 at.% was calculated to be 435 μs, 484 μs, 514 μs and 453 μs, respectively. The experimental results show that Yb:CALYO crystal fiber is a potential laser medium for ultrashort laser operation. • Yb:CaYAlO 4 shaped crystal fibers were grown by the micro-pulling down method. • The crystal structure, polarized spectra were investigated. • The effect of Yb3+ concentration on the spectroscopic properties was evaluated. [ABSTRACT FROM AUTHOR]

Abstract: The Cr(0.1%),Yb(10%):GGG crystals have been grown by the Czochralski method. The chemical composition is: Yb0.33Gd2.47Cr0.005Ga5.2O12. There are no observed Yb3+ ions substituting Ga3+ ions, just like that of Yb:GGG crystals. The defects in Cr,Yb:GGG crystal were also investigated. The absorption and emission spectra of Cr,Yb:GGG crystal at room temperature have been measured. The O2 and H2 annealing effect of Cr,Yb:GGG crystal have been compared. Cr3+ can greatly weak the visible luminescence of this crystal. The Cr–Yb-codoped crystals may be potential materials for compact, efficient, high stability LD pumped solid state lasers. [Copyright &y& Elsevier]

Abstract: In this paper, single crystal of ytterbium (Yb) doped Ca5(PO4)3F (FAP) has been grown along the c-axis by using the Czochralski method. The segregation coefficients of Yb3+ in the Yb:FAP crystal has been determined by ICP-AES method. The absorption spectrum, fluorescence spectrum and fluorescence lifetime of the Yb:FAP crystal has been also measured at room temperature. In the absorption spectra, there are two absorption bands at 904 and 982nm, respectively, which are suitable for InGaAs diode laser pumping. The absorption cross-section (σ abs) is 5.117×10−20 cm2 with an FWHM of 4nm at 982nm. The emission cross-section (σ em) is 3.678×10−20 cm2 at 1042nm. Favorable values of the absorption cross-section at about 982nm are promising candidates for laser diode (LD) pumping. [Copyright &y& Elsevier]

Sm:YAlO 3 (Sm:YAP) crystal with size of Φ28 × 80 mm3 was grown by Czochralski (Cz) method. Polarized absorption spectra and fluorescence spectra of Sm:YAP crystal were discussed for the first time. The peak emission cross-sections were calculated to be 0.80 × 10−21 cm2 (604 nm for a-polarization), 1.82 × 10−21 cm2 (604 nm for b-polarization) and 1.63 × 10−21 cm2 (610 nm for c-polarization), respectively. The Judd-Ofelt (JO) intensity parameters were calculated to be Ω 2 = 2.59 × 10−20 cm2, Ω 4 = 1.78 × 10−20 cm2 and Ω 6 = 2.98 × 10−20 cm2, respectively. The decay lifetime of 4G 5/2 energy level was measured to be 2.51 ms. All above results indicate the Sm:YAP crystal may be a potential candidate of reddish-orange laser pumped directly by the GaN/InGaN laser diode. • Sm:YAlO 3 crystal was grown by Cz method. • Polarized optical spectra of Sm:YAlO 3 crystal were investigated. • The transitions of 4G 5/2 → 6H 7/2 have the highest branching ratio value, which is suitable for reddish-orange laser. [ABSTRACT FROM AUTHOR]

Abstract We report on the growth, spectroscopic properties and visible laser operation of Pr3+-doped LaMgAl 11 O 19 (LMA) crystal. The absorption and emission spectra were recorded in visible wavelength range and the decay time of 3P 0 manifold was measured to be about 34.5 μs at room temperature. Using an InGaN laser diode as pump source, continuous-wave laser operation of Pr:LMA crystal have also been demonstrated in red at about 645 nm and deep red at about 725 nm, which provide new linearly polarized sources for various potential applications. Highlights • A Pr:LMA crystal was successfully gown by using the Czochralski method. • Spectral parameters of Pr:LMA crystal were obtained. • Using a blue laser diode as pump source, red and deep red laser were demonstrated from Pr:LMA crystal. [ABSTRACT FROM AUTHOR]

Abstract We report on diode-pumped continuous-wave and passively Q-switched c-cut Nd:LMA lasers. For continuous-wave operation, the maximum output power reaches 3.10 W with slope efficiency of about 48.9% at 1055 nm and 2.63 W with slope efficiency of 43.1% at 1082 nm. For passively Q switched operation, using a Cr:YAG as saturable absorber, the achieved maximum average output power is 1.49 W at 1055 nm with pulse width of 18.4 ns. Moreover, we have also realized simultaneous dual-wavelength laser operation at 1055 and 1082 nm with a maximum average output power of 1.22 W and a pulse width of 19.4 ns. Furthermore, inserting an etalon for suppressing the 1055 nm line, we have operated single wavelength laser at 1082 nm with output power of 0.31 W and pulse width of 20.8 ns. This work has verified the potential of Nd:LMA crystal as a laser gain medium. Highlights • Absorption and emission spectra of a c -cut Nd: LaMgAl 11 O 19 crystal are reported. • Efficiently continuous-wave operation at 1055 and 1082 nm have been realized for the first time to our knowledge. • Efficiently passively Q-switched operation at 1055 and 1082 nm have also been realized. [ABSTRACT FROM AUTHOR]

We report on blue-diode-pumped continuous-wave Pr:YAlO 3 (YAP) crystal lasers. Using a b- cut sample, a maximum output power of 181 mW is achieved at ∼747 nm with slope efficiency of 12.7% with respect to the absorbed power. Using a c -cut sample, a dual-wavelength laser at ∼743 and ∼753 nm is obtained with a total maximum output power of 72 mW by using the blue diode pumping, for the first time to our knowledge. These laser emissions are all linearly polarized and M 2 factors of these output laser beams are also measured. YAP is experimentally verified to be one of effective oxide hosts for Pr-doped visible laser operation besides its fluoride counterparts. [ABSTRACT FROM AUTHOR]

We report on diode-pumped disordered Nd:LuYSiO 5 (Nd:LYSO) crystal lasers operating on the 4 F 3/2 → 4 I 11/2 and 4 F 3/2 → 4 I 13/2 transitions. Simultaneous laser operation at 1074 and 1078 nm is achieved with maximum output power of 4.46 W and slope efficiency of 39.6%. Single wavelength laser at 1358 nm with maximum output power of 1.15 W and slope efficiency of 11.8% is also obtained. Moreover, four single-wavelength lasers at 1058, 1107, 1330 and 1386 nm with relatively low gains are achieved with maximum output powers of 2.72, 1.22, 0.52 and 0.42 W, respectively, for the first time to our knowledge. Lasing at non-traditional emission lines was obtained by using output couplers with dielectric coatings for specific wavelength ranges. [ABSTRACT FROM AUTHOR]

Dy 3+ -doped YAlO 3 single crystal has been successfully grown by Czochralski technique. The spectroscopic parameters were determined by Judd-Ofelt theory based on the measured polarized absorption spectra. Dy:YAP crystal exhibits a yellow emission centered at 574 nm which can be used for pumping of the forbidden 1 S 0 - 3 P 0 ytterbium clock transition. The decay lifetime of the 4 F 9/2 level was measured to be 185 μs. [ABSTRACT FROM AUTHOR]

Ce 3+ doped Gd 3 Ga 3 Al 2 O 12 (Ce:GGAG) ceramics were fabricated by solid state reactive sintering method in this study. The ceramics were pre-sintered in normal muffle furnace in air at various temperature range from 1410 °C to 1550 °C for 10 h and post-treated by hot isostatic press at 1400 °C/2 h in 200 MPa Ar. The phase and microstructure evolution of Ce: GGAG samples during the densification process were investigated by X-ray diffraction and scanning electron microscope. Pure GGAG phase appeared with the temperature increased to 1200 °C. The fully dense and translucent GGAG ceramics were fabricated by pre-sintering at 1450 °C and followed by HIP treatment. [ABSTRACT FROM AUTHOR]

We report on diode-pumped Nd:LuAG crystal and ceramic lasers operating at about 1.83 μm, using a simple and compact plane-concave cavity configuration. For Nd:LuAG crystal laser oscillating at 1828.43 nm, the maximum output power reaches 0.36 W with slope efficiency of about 5.0%. For Nd:LuAG ceramic laser, a maximum output power of 0.145 W is achieved with slope efficiency of about 2.2%, and the lasing wavelength peaks at 1828.76 nm. The 1.83-μm Nd laser sources could be very promising for eye-safe applications because they have stronger water absorption than another kind of eye-safe Nd lasers operating at 1.4 μm. [ABSTRACT FROM AUTHOR]

A high-quality Cr:CYA (Cr:CaYAlO 4) single crystal fiber was grown by μ-PD (Micro-Pulling-Down) method. The E//a and E//c polarized excitation spectra of Cr:CYA at room temperature was measured. The crystal field parameters were calculated and the energy level structure of Cr:CYA was analyzed. We also measured the polarization emission spectra and lifetimes at different temperatures and calculated the effective emission cross-section. Based on the above data and Boltzmann law, the thermal distribution between the excited energy levels 2E and 4A 2 at different temperatures was analyzed. The present work may be useful for guiding laser research on Cr:CYA and other Cr3+-doped laser crystals above room temperature. • Cr:CYA single crystal fiber was grown by μ-PD (Micro-Pulling-Down) method. • Excitation spectra and crystal field parameters of Cr:CYA crystals were investigated and analyzed. • The effective emission cross section of Cr:CYA at different temperatures was calculated. [ABSTRACT FROM AUTHOR]

Tm3+-doped CaYAlO 4 (Tm:CALYO) shaped crystals fibers with various doping concentration of 2 at.%, 3 at.%, 5 at.% and 7 at.% have been successfully grown by the micro-pulling-down (μ -PD) method. The polarized absorption spectra, polarized fluorescence spectra and fluorescence decay curves were analyzed at room temperature. The absorption bands of 3H 6 →3H 4 transition centered at around 800 nm match well with commercial AlGaAs laser diode pumping sources. For 7 at.% Tm:CALYO crystal fiber, the full width at half maximum (FWHM) of the emission band for π polarization at 1806 nm was 225.4 nm. The fluorescence of 3F 4 level decreased strongly as the thulium concentration increased. All the results indicate that Tm:CALYO crystal fibers are promising for ultrashort and tunable laser operation. • Tm:CALYO shaped crystal fibers were grown by the micro-pulling-down technique for the first time. • The full width at half maximum (FWHM) of the emission band for π polarization at 1806 nm was calculated to be 225.4 nm. • The fluorescence lifetime was calculated to be 4.11, 3.74, 3.55 and 2.90 ms for doping concentration of 2, 3, 5 and 7 at.%, respectively. [ABSTRACT FROM AUTHOR]

Ce,Tb,Gd:YAG-Al 2 O 3 eutectic crystal phosphor plates (ECPPs) were grown by the micro-pulling-down (μ-PD) method to adjust correlated color temperature (CCT) and color rendering index (Ra) for high-power warm white LED applications. Tb3+ and Gd3+ ions in Ce:YAG-Al 2 O 3 play a positive role in spectra adjustment based on the structural and luminescent properties investigations. Tb3+ ions enhance the fluorescence lifetime of Ce3+ ions from 61.1 to 63.8 ns and improve the luminescence efficiency, and the highest optical-optical conversion efficiency (OCE) is 270.56 lm/W. Corresponding luminescence shift from cold white to greenish yellow. Gd3+ ions increase the peak wavelength from 554 to 564 nm and improve the Ra value, and the maximum Ra is 75.5. Corresponding luminescence is shifted from cold white to reddish violet. In addition, the luminescence of Ce,Tb,Gd:YAG-Al 2 O 3 ECPPs is adjusted to warm white with CIE coordinate (0.374, 0.364) and CCT of 4102 K, and Ra of 73.0, which is of great significance for realizing the high-power warm white LED lighting. • Tb3+ ions increased the fluorescence lifetime of Ce3+ ions by ∼17%， and improved the luminescence efficiency with the highest OCE of 270.56 lm/W. And Gd3+ ions increased the peak wavelength of emission from 554 nm to 564 nm and improved the Ra from 65.5 to 75.5. • The Ce,Tb,Gd:YAG-Al 2 O 3 ECPP has excellent performance with a low CCT of ∼4100 K and a CIE coordinate of (0.374, 0.364). • The CRI of Ce,Tb,Gd:YAG-Al 2 O 3 ECPP reached 73.0. [ABSTRACT FROM AUTHOR]

We report a power scaled laser operation of diode-pumped Nd:LSO lasers at 1.35 μm. With single-end-pumping scheme, maximum output power reaches 0.77 W at 1358.99 nm in free-running mode. By inserting an etalon, wavelength tuning can be realized with tuning range of at least 6.5 nm from 1356.95 nm to 1363.39 nm. Simultaneous dual-wavelength laser at 1331.63 and 1357.43 nm can also be generated with total output power of 0.19 W, for the first time to our knowledge. Further power scaling to 1.03 W of the 1358.99 nm laser is finally achieved by recycling the remaining pump power, which represents the highest output power so far for 1.3 μm silicate lasers. [ABSTRACT FROM AUTHOR]

High quality Pr3+ single-doped PbF 2 and Pr3+/Yb3+ co-doped PbF 2 single crystals were grown by temperature gradient technique (TGT). By co-doping Yb3+ ion as Pr3+ ions sensitizer, the visible light emission can be regulated and the largest luminescence branching ratio can be switched from red-orange to blue-green light. Besides, when Pr3+ ions doping concentration is as low as possible, the blue light self-absorption effect can be weakened, which is beneficial to high-efficiency blue laser output. Moreover, the broad band emission around 1.3 μm from 1G 4 energy level can be observed in the Pr3+/Yb3+:PbF 2 crystal with the low maximum phonon energy for the first time. Absorption, emission spectra and luminescence mechanism are well analyzed by the energy transfer process and J-O theory. The laser upper energy level lifetime of Pr3+ ions has a great increase by Yb3+ ion effect. These advantageous spectroscopic characteristics show that the Pr3+/Yb3+:PbF 2 crystal might be potential laser gain materials for blue-green and ∼1.3 μm near-IR laser operation. • By co-doping Yb3+ ion as sensitizer for Pr3+ ions, the visible light emission can be regulated and the largest luminescence component ratio can be changed from red-orange light to blue-green light. • When doping concentration of Pr3+ ion is as low as possible, the self-absorption effect of blue light can be weakened, which is beneficial to high-efficiency blue laser output. • The broad band emission around 1.3 μm from 1G 4 energy level can be observed in the Pr3+/Yb3+: PbF 2 crystal with the low maximum phonon energy for the first time. [ABSTRACT FROM AUTHOR]

Titanium doped sapphire (Ti:Al 2 O 3 ) crystal fibers have been grown by the micro-pulling-down (μ-PD) method using different pulling rate in the range (0.1–0.5 mm/min). The present work has investigated the crystal growth, including diameter, bubbles defects and segregation properties. The fiber’s absorption and IR emission experiments are analyzed. The lifetime of Ti 3+ in the IR range obtained at room temperature is 3.1 μs. Moreover, the two blue emissions at 420 nm and 470 nm bands have been discussed. [ABSTRACT FROM AUTHOR]

A continuous wave (CW) tunable laser based on an alloyed oxyorthosilicate Yb:(Gd 0.1 Y 0.9 ) 2 SiO 5 was demonstrated for the first time. With an output coupler (OC) of T = 10%, a maximum output power of 958 mW was obtained with a slope efficiency of 18.2%. Simultaneous multi-wavelength operation was also observed with an OC of T = 4%. The M 2 factor of the CW laser beam was measured to be 1.06. The thermo-optic coefficient was estimated to be 7.1 × 10 −6 /K. By using a 400 μm-thick GaAs wafer as saturable absorber, a stably Q-switched laser at 1080.4 nm was also firstly realized. A minimum pulse duration of 60.2 ns was obtained with a repetition rate of 47.6 kHz under an absorbed pump power of 11.25 W. The corresponding highest pulse energy and peak power were 5.3 μJ and 88 W, respectively. By using a V-type cavity and an OC of T = 4%, the laser can be tuned in the range from 1021 to 1094 nm. [ABSTRACT FROM AUTHOR]

Highlights: [•] Ce doped Al2O3−YAG eutectic has been successfully grown by the Czochralski method. [•] The eutectic has a higher segregation coefficient of Ce3+ than YAG single crystal. [•] Photoluminescence properties of Ce-doped Al2O3–YAG eutectic were investigated. [•] Variouswhitecolourscouldbeobtainedasrequired,byvaryingtheeutecticphosphorthickness. [•] The distinctive structure of eutectic made it have a better performance in LED than particle-dispersed system. [ABSTRACT FROM AUTHOR]

Tm3+ doped and Tm3+, Pr3+ co-doped Lu 3 Al 5 O 12 (LuAG) garnet single crystals have been successfully grown by the micro-pulling-down (μ-PD) method. The absorption spectra, fluorescence spectra and lifetimes were investigated at room temperature. In the absorption spectra, the transition centered at 782 nm matches well with the GaAlAs LDs laser pumping. The incorporation of Pr3+ into Tm3+-doped LuAG crystals enhanced the intensity of 1.5 μm emission and decreased the fluorescence lifetime of the lower energy level for 1.5 μm emission from 10.427 ms to 2.603 ms. The results indicate that Tm,Pr:LuAG crystal can be promising candidate for near infrared 1.5 μm laser materials. • Tm:LuAG and Tm,Pr:LuAG crystals have been successfully grown by the micro-pulling-down (μ-PD) method. • Spectral parameters of Tm:LuAG and Tm,Pr:LuAG crystals were obtained and compared. • The fluorescence mechanism of Tm,Pr:LuAG crystal has been studied for the first time. [ABSTRACT FROM AUTHOR]

Yb,Ho:Y 2 O 3 ceramics have been fabricated by Spark Plasma Sintering method (SPS). The microstructure and transmittance of the ceramics sintered from 1623 K to 1673 K were analyzed. The highest in-line transmittance of Yb,Ho:Y 2 O 3 ceramic sintered at 1673 K reached almost 83% at 750 nm with the thickness of 1 mm. The absorption spectra, fluorescence spectra and fluorescence decay curve were recorded at room temperature. The Judd-Ofelt parameters Ω 2 , Ω 4 and Ω 6 were calculated to be 8.33 × 10−20 cm2, 1.81 × 10−20 cm2, and 0.82 × 10−20 cm2, respectively. The intense emission cross section of Yb,Ho:Y 2 O 3 ceramic was 3.43 × 10−20 cm2 at 2057 nm with full width at half maximum (FWHM) of 208 nm. The results indicate that Yb,Ho:Y 2 O 3 transparent ceramic can be a promising laser gain medium for laser operation around 2 μm. Image 1 • The highest in-line transmittance of Yb,Ho:Y 2 O 3 ceramic sintered at 1673 K reached almost 83% at 750 nm with the thickness of 1 mm. • The spectral characteristics were intensively investigated through Judd-Ofelt theory. [ABSTRACT FROM AUTHOR]

We report on the comparative growth and spectroscopy of Eu3+-doped Y 3 Al 5 O 12 (YAG) and Y 3 ScAl 4 O 12 crystals grown by the micro-pulling-down (μ-PD) method. The structure of the as-grown crystals was determined by X-ray diffraction (XRD) and Raman spectroscopy. The absorption spectra of the crystals are dominated by a strong line centered at 395 nm, matching well with the emission of commercial ultraviolet laser diodes. The Eu:YAG and Eu:Y 3 ScAl 4 O 12 crystals exhibit strongest red emission centered at 710 nm and the full width at half maximum (FWHM) was calculated to be 2.03 and 3.19 nm, respectively. The fluorescence decay curves of 5D 0 levels were measured and discussed. All the results indicate that the Eu:YAG and Eu:Y 3 ScAl 4 O 12 crystals are promising candidates for red luminescent/laser materials. • Eu:YAG and Eu:Y 3 ScAl 4 O 12 crystals were successfully grown by the micro-pulling-down technique for the first time. • The structure parameters of Eu:YAG and Eu:Y 3 ScAl 4 O 12 crystals were investigated by XRD. • Spectral parameters of Eu:YAG and Eu:Y 3 ScAl 4 O 12 crystals were obtained and compared. [ABSTRACT FROM AUTHOR]

Tm3+- doped GdScO 3 single crystal was successfully grown by the edge-defined film-fed method (EFG) for the first time. The spectroscopic properties of the crystal were investigated at room temperature. The absorption cross section of Tm:GdScO 3 at 795 nm is 1.58 × 10−20 cm2. By applying the Judd–Ofelt approach, the intensity parameters Ω 2,4,6 , radiative transition rates, branching ratios and radiative lifetime were calculated. Tm:GdScO 3 exhibits strong emission at 1460 nm and 2300 nm with stimulated emission cross section of 1.8 × 10−21 cm2 and 2.7 × 10−21 cm2, respectively. The fluorescence lifetime of the 3H 4 level was measured to be 265 μs. All the results indicated that the Tm:GdScO 3 crystal is a potential laser material. • Tm:GdScO 3 crystal was successfully grown by the edge-defined film-fed method (EFG) for the first time. • The structure parameters of Tm:GdScO 3 crystal were investigated by XRD. • Spectral parameters and Judd-Ofelt parameters of Tm:GdScO 3 crystal were obtained and compared. [ABSTRACT FROM AUTHOR]

Mid-infrared ZnSe 0.9 S 0.1 transparent mixed crystal ceramics were successfully fabricated by hot pressing (HP) in combination with post hot isostatic pressing (HIP). The phase structure of the as-fabricated mixed ceramics was found to be composed of cubic sphalerite, and the existence of any secondary phase was not detected. It was noticed that after post HIP treatment, the grain size increased greatly, and many closed pores in the samples disappeared. The specimens HP sintered at 1000 °C under 60 MPa and post HIP treated at 1300 °C under 196 MPa in the Ar atmosphere for six hours had the best transmission of 62.3% at 14 μm. • Mid-infrared ZnSe 0.9 S 0.1 transparent ceramics were fabricated by hot pressing in combination with hot isostatic pressing. • The samples pre-sintered at 1000°C and hot isostatic pressing treated at 1300 °C under 196 MPa had the best transmission. • The optimum transmission of ZnSe 0.9 S 0.1 ceramic reach 62.3% at 14 μm. [ABSTRACT FROM AUTHOR]

High quality of Tb3+-single doped and Tb3+/Pr3+ co-doped CaF 2 crystals were grown by the temperature gradient technique (TGT). Pr3+ ions were used as sensitizing ions of Tb3+. Optical properties including absorption spectrum, emission spectrum, and fluorescence decay curve were recorded. Through co-doping sensitizing ions of Pr3+, the absorption cross section around 480 nm increased from 0.007 × 10−20 cm2 to 0.3 × 10−20 cm2, the large value is beneficial for the absorption of LD pump source. Judd-Ofelt theory was used to analyze the spectroscopic parameters. Fluorescence branch ratio, transition probability, radiative and fluorescence lifetimes, and quantum efficiency were determined as well. The emission cross section of Tb,Pr:CaF 2 for the green emission at 544 nm and yellow emission at 587 nm corresponding to the transition of 5D 4 →7F 5 and 5D 4 →7F 4 were calculated to be 5.56 × 10−22 cm2 and 8.78 × 10−23 cm2, respectively, which is comparable to the Tb3+ doped CaF 2 crystal. • Tb:CaF 2 crystal and Tb/Pr co-doped CaF 2 crystal were grown by TGT method. • Pr3+ ions were used to improve the absorption cross section of Tb3+ ions. • Judd-Ofelt theory was used to analyze the spectroscopic parameters. • Tb,Pr:CaF 2 crystal is a potential laser material for green and yellow oscillation. [ABSTRACT FROM AUTHOR]

High quality 7 at%Er:Y 2 O 3 crystal was successfully grown by Fz method. Judd-Ofelt theory was applied to analyze spectroscopic properties at 2.7 μm. The larger value of Ω 2 shows low local environment symmetry exists in Er:Y 2 O 3 crystal, and the large Ω 4 /Ω 6 indicates better spectral quality. The larger absorption cross-section and FWHM are beneficial to efficient absorption of pump source. The fluorescence spectra and lifetimes of Er:Y 2 O 3 crystal were measured and studied at 2.7 μm. The emission cross-sections at 2723 nm was calculated to be 1.41 × 10−20cm2. Compared with other Er3+ doped crystals, the large spectral quality factors Q and low fluorescence lifetime ratio illustrate that Er:Y 2 O 3 crystal has excellent laser properties at 2.7 μm. In addition, the low inversion ratio also indicates great potential of Er:Y 2 O 3 crystal for laser generation at 2.7 μm. • A high quality 7%Er:Y 2 O 3 laser crystal was successfully grown by Fz method. • Judd-ofelt (J-O) parameterization scheme was applied to analyze the spectroscopic properties of 7%Er:Y 2 O 3 laser crystal at 2.7 μm. • The large spectral quality factors Q with low fluorescence lifetime ratio illustrates that Er:Y 2 O 3 crystal has excellent laser properties at 2.7 µm. • The low inversion ratio indicates great potential of Er:Y 2 O 3 crystal for laser generation at 2.7 μm. [ABSTRACT FROM AUTHOR]

Tb3+ doped Y 3 Al 5 O 12 (Tb:YAG) single crystal has been grown by the Czochralski method. Optical spectroscopic characterization of the crystal was performed in order to evaluate the potential for the visible laser application. Based on the Judd–Ofelt theory, the spectroscopic parameters Ω t (t = 2, 3, 6), spontaneous transition probabilities, fluorescence branch ratio and the radiation lifetime of excited state 5D 4 state were calculated. The green emission cross section of 5D 4 →7F 5 transition were calculated to be 1.23 × 10−21 cm2 , The yellow emission cross section of 5D 4 →7F 4 transition were calculated to be 7.08 × 10−23 cm2. The decay time of the 5D 4 level was measured to be 3.12 ms, which is in reasonable agreement with the radiation lifetime of 3.30 ms. All the results indicate the potential of Tb:YAG crystal as a visible laser material. • Tb:YAG crystal was grown by Czochralski method. • Judd-Ofelt theory was used to analyze the spectroscopic properties of Tb:YAG for the first time. • Tb:YAG crystal is a potential laser material for yellow and green laser output. [ABSTRACT FROM AUTHOR]

Nd3+ doped Y 3 Sc x Al 5-x O 12 (x = 0.05, 0.5, 1) single crystals were successfully grown by the micro-pulling-down (μ-PD) technique. The effect of compositional parameter x on the structure, absorption, emission and fluorescence lifetime of Nd:Y 3 Sc x Al 5-x O 12 crystals was studied. The Nd3+ concentration in the core increased with increasing of compositional parameter x. The full width at half maximum (FWHM) of the emission band centered at 1064 nm was calculated to be 6.1, 7.1, and 7.3 nm for x = 0.05, 0.5 and 1, respectively. The fluorescence lifetimes of 4F 3/2 levels are 259.3, 269.6, and 276.9 μs for x = 0.05, 0.5, and 1, respectively. The results indicate that the Nd:Y 3 Sc x Al 5-x O 12 crystals are promising materials for laser output. • Nd:Y 3 Sc x Al 5-x O 12 crystals were successfully grown by the micro-pulling-down technique. • Spectral parameters of Nd:Y 3 Sc x Al 5-x O 12 crystals were obtained. • The effect of composition on the structure and spectral parameters was discussed. [ABSTRACT FROM AUTHOR]

High optical quality Er3+ doped Lu 2 O 3 single crystal with optimum doping concentration was grown by Floating zone (Fz) method. The spectral properties and Judd-Ofelt (JO) analysis were reported. The emission cross-section at 2772 nm was calculated to be 2.47 × 10−20 cm2 with FWHM of 188 nm. The fluorescence lifetime of 4I 11/2 and 4I 13/2 energy level was fitted to be 1.62 ms and 4.02 ms. Optimum lifetime ratio (τ low /τ up) is beneficial to laser operation. Compared with reported Er3+ doped crystal, the larger spectral quality factors Q and low inversion ratio P of 7 at.% Er:Lu 2 O 3 crystal indicate that it has a favorable laser performance for 2.8 μm laser operation. • In our work high optical quality 7 at.% Er3+ doped Lu 2 O 3 single crystal with optimum doping concentration was grown by Floating zone method. • The spectroscopic properties were reported by Judd-Ofelt theory. • In order to weaken the influence of reabsorption phenomenon, we grind sample of Er:Lu 2 O 3 crystal into powder to measure fluorescence lifetime of 4I 13/2. • The measured fluorescence lifetime of 4I 13/2 is close to actual value. • We compare the optical characteristics of 7at.% Er:Lu 2 O 3 crystal with other materials in Mid-infrared. [ABSTRACT FROM AUTHOR]