Search

In this paper, a single-frequency quasi-continuous-wave partially pumped slab (Innoslab) amplifier at 1064 nm is reported. The 4.4-W single-frequency seed laser was amplified to 148.1 W with optical-optical efficiency of 30.4%. The output pulse duration was 141.4 μs at the repetition of 500 Hz. The beam quality factors of M2 were 1.41 and 1.37 in the horizontal and vertical direction respectively. The experimental results match well with the numerical simulation. To the best of our knowledge, this is the first report on single-frequency Nd:YAG Innoslab amplifier with such a high output power and efficiency.

A 208 W all-solid-state modulated-longitudinal-mode quasi-continuous-wave sodium guide star (SGS) laser was developed by sum-frequency of a 1064 nm laser and a 1319 nm laser. The laser contained two spectral lines separated by 1.72 GHz for re-pumping the sodium atoms. To suppress absorption saturation effect of the sodium atoms induced by the high light intensity, we used a white noise generator to modulate the 1064 nm single frequency seed laser in the frequency domain. The line width of the modulated-longitudinal-mode 589 nm laser was maximally broadened to 0.74 GHz compared to the initial line width of ~0.30 GHz. A bright SGS with photon return flux of 56800 photons/s/cm2 during the pulse length was obtained.

We demonstrate a master oscillator power amplifier (MOPA) architecture based on Yb:YAG amplifiers and adaptive optics (AO) systems with a high power and high beam quality laser output. With two conduction cooled, dual-end-pumped Yb:YAG zigzag-slab amplifiers at room temperature, the fiber laser of 300 W was scaled to 11.9 kW. Moreover, AO system positioned downstream was utilized to correct wavefront of amplified laser. The beam quality β at maximum output power was 2.8 times diffraction limited with closed-loop AO system.

We present investigations into a narrow-linewidth, quasi-continuous-wave pulsed all-solid-state amplified spontaneous emission (ASE) source by use of a novel multiple-pass zigzag slab amplifier. The SE fluorescence emitted from a Nd:YAG slab active medium acts as the seed and is amplified back and forth 8 times through the same slab. Thanks to the angular multiplexing nature of the zigzag slab, high-intensity 1064-nm ASE output can be produced without unwanted self-lasing in this configuration. Experimentally, the output energy, optical conversion efficiency, pulse dynamics, spectral property, and beam quality of the ASE source are studied when the Nd:YAG slab end-pumped by two high-brightness laser diode arrays. The maximum single pulse energy of 347 mJ is generated with an optical efficiency of ~5.9% and a beam quality of 3.5/17 in the thickness/width direction of the slab. As expected, smooth pulses without relaxing spikes and continuous spectra are achieved. Moreover, the spectral width of the ASE source narrows versus the pump energy, getting a 3-dB linewidth of as narrow as 20 pm (i.e. 5.3 GHz). Via the sum frequency generation, high-intensity, smooth-pulse, and narrow-linewidth ASE sources are preferred for solving the major problem of saturation of the mesospheric sodium atoms and can create a much brighter sodium guide star to meet the needs of adaptive imaging applications in astronomy.