Search

Single-photon light detection and ranging (LiDAR) techniques use emerging single-photon detectors (SPADs) to push 3D imaging capabilities to unprecedented ranges. However, it remains challenging to robustly estimate scene depth from the noisy and otherwise corrupted measurements recorded by a SPAD. Here, we propose a deep sensor fusion strategy that combines corrupted SPAD data and a conventional 2D image to estimate the depth of a scene. Our primary contribution is a neural network architecture-SPADnet-that uses a monocular depth estimation algorithm together with a SPAD denoising and sensor fusion strategy. This architecture, together with several techniques in network training, achieves state-of-the-art results for RGB-SPAD fusion with simulated and captured data. Moreover, SPADnet is more computationally efficient than previous RGB-SPAD fusion networks.

We demonstrate two complementary optical separation techniques of dielectric particles on the surface of silicon nitride waveguides. Glass particles ranging from 2 μm to 10 μm in diameter are separated at guided powers below 40 mW. The effects of optical, viscous, and frictional forces on the particles are modeled and experimentally shown to enable separation. Particle interactions are investigated and shown to decrease measured particle velocity without interfering with the overall particle separation distribution. The demonstrated separation techniques have the potential to be integrated with microfluidic structures for cell sorting.

Resonant mirrors introduce large spectral gradients in reflected phase while maintaining high reflectivity, allowing synthesis of optimized reflected phase for many practical applications. In this paper we show theoretically that asymmetry is required for negative group delay in lossless mirrors and explore the limits of reflected phase in resonant mirrors through the use of coupled mode theory and rigorous couple wave analysis. Our coupled mode theory shows that the phase response of resonant mirrors is determined by interacting resonances and gives insight into tradeoffs in design of mirrors with desired phase response.

We study the performance of novel quadrature amplitude modulation (QAM) constellations for 100 Gb/s transmission by a directly-modulated laser. Due to the strong nonlinearity of a directly-modulated laser, rectangular constellations suffer a large penalty from their regular spacing between symbols. We present a method for synthesizing irregular constellations which position symbols more efficiently. We will demonstrate the improved performance of these novel constellations over the conventional rectangular constellation as well as the superior performance achievable with digital QAM compared to optimally bit-loaded discrete-multitone modulation.

We investigate, by simulations and experiments, the light scattering of small particles trapped in photonic crystal membranes supporting guided resonance modes. Our results show that, due to amplified Rayleigh small particle scattering, such membranes can be utilized to make a sensor that can detect single nano-particles. We have designed a biomolecule sensor that uses cross-polarized excitation and detection for increased sensitivity. Estimated using Rayleigh scattering theory and simulation results, the current fabricated sensor has a detection limit of 26 nm, corresponding to the size of a single virus. The sensor can potentially be made both cheap and compact, to facilitate use at point-of-care.

We investigate theoretically and experimentally Fano resonances in integrated silicon Bragg reflectors. These asymmetric resonances are obtained by interference between light reflected from the Bragg waveguide and from the end facet. The Bragg reflectors were designed and modeled using the 1D transfer matrix method, and they were fabricated in standard silicon wafers using a CMOS-compatible process. The results show that the shape and asymmetry of the Fano resonances depend on the relative phase of the reflected light from the Bragg reflectors and end facet. This phase relationship can be controlled to optimize the lineshapes for sensing applications. Temperature sensing in these integrated Bragg reflectors are experimentally demonstrated with a temperature sensitivity of 77 pm/°C based on the thermo-optic effect of silicon.

High-Q guided resonance modes in two-dimensional photonic crystals, enable high field intensity in small volumes that can be exploited to realize high performance sensors. We show through simulations and experiments how the Q-factor of guided resonance modes varies with the size of the photonic crystal, and that this variation is due to loss caused by scattering of in-plane propagating modes at the lattice boundary and coupling of incident light to fully guided modes that exist in the homogeneous slab outside the lattice boundary. A photonic crystal with reflecting boundaries, realized by Bragg mirrors with a band gap for in-plane propagating modes, has been designed to suppress these edge effects. The new design represents a way around the fundamental limitation on Q-factors for guided resonances in finite photonic crystals. Results are presented for both simulated and fabricated structures.

We make the case for minimizing cavity length of extrinsic Fabry-Pérot (FP) cavities for use in fiber-tip sensors. Doing so mitigates multiple challenges that arise from using multimode fibers: mode averaging, phase uncertainty, amplitude reduction, and spectral modal noise. We explore these effects in detail using modal simulations, and construct pressure sensors based on this principle. We discuss the multimodal effects that we observe in our fiber sensors, and use simple filtering of the spectral signal to more easily measure pressure sensitivity. The concept of short-cavity FP interferometry is important for ensuring high quality and performance of multimode fiber sensors.

We present a two-axis electrostatic MEMS scanner with high-reflectivity monolithic single-crystal-silicon photonic crystal (PC) mirrors suitable for applications in harsh environments. The reflective surfaces of the MEMS scanner are transfer-printed PC mirrors with low polarization dependence, low angular dependence, and reflectivity over 85% in the wavelength range of 1490nm~1505nm and above 90% over the wavelength band of 1550~1570nm. In static mode, the scanner has total scan range of 10.2° on one rotation axis and 7.8° on the other. Dynamic operation on resonance increase the scan range to 21° at 608Hz around the outer rotation axis and 9.5° at 1.73kHz about the inner rotation axis.

A sensor designed to detect bio-molecules is presented. The sensor exploits a planar 2D photonic crystal (PC) membrane with sub-micron thickness and through holes, to induce high optical fields that allow detection of nano-particles smaller than the diffraction limit of an optical microscope. We report on our design and fabrication of a PC membrane with a nano-particle trapped inside. We have also designed and built an imaging system where an optical microscope and a CCD camera are used to take images of the PC membrane. Results show how the trapped nano-particle appears as a bright spot in the image. In a first experimental realization of the imaging system, single particles with a radius of 75 nm can be detected.

We report on the fabrication of 2-D photonic crystal (PC) micro-mirrors, and Finite Difference Time Domain (FDTD) simulations and measurements of their reflectance spectra and polarization dependence at normal incidence. The PC mirrors were fabricated in free-standing thin polysilicon membranes supported by silicon nitride films for stress compensation. Greater than 90% reflectivity is measured over a wavelength range of 35 nm from 1565 nm to 1600 nm with small polarization dependence. Our FDTD simulations show that fabrication errors on the order of tens of nanometers can strongly affect the reflection spectra. When the fabrication errors are kept below this level, FDTD simulations on perfectly periodic structures accurately predict the reflection spectra of the fabricated PC mirrors, despite their sensitivity to the fabrication errors.

We present the optical design of a 9.6-mm diameter fiber-coupled probe for combined femtosecond laser microsurgery and nonlinear optical imaging. Towards enabling clinical use, we successfully reduced the dimensions of our earlier 18-mm microsurgery probe by half, while improving optical performance. We use analytical and computational models to optimize the miniaturized lens system for off-axis scanning aberrations. The optimization reveals that the optical system can be aberration-corrected using simple aspheric relay lenses to achieve diffraction-limited imaging resolution over a large field of view. Before moving forward with custom lenses, we have constructed the 9.6-mm probe using off-the-shelf spherical relay lenses and a 0.55 NA aspheric objective lens. In addition to reducing the diameter by nearly 50% and the total volume by 5 times, we also demonstrate improved lateral and axial resolutions of 1.27 µm and 13.5 µm, respectively, compared to 1.64 µm and 16.4 µm in our previous work. Using this probe, we can successfully image various tissue samples, such as rat tail tendon that required 2-3 × lower laser power than the current state-of-the-art. With further development, image-guided, femtosecond laser microsurgical probes such as this one can enable physicians to achieve the highest level of surgical precision anywhere inside the body.

We show that modes in a photonic crystal slab that are uncoupled to outside radiation in a symmetric structure can be excited by breaking the mirror symmetry through introducing a protrusion on the side of the photonic crystal holes. We show that coupling to these resonances can be controlled by the strength of this asymmetry, and that it is also possible to choose among modes to couple to, through the shape of the asymmetry introduced. We provide simple theoretical arguments that explain the effect, and present eigenmode simulations and time-domain simulations. We confirm this predicted behavior with measurements on a photonic crystal with a broken mirror symmetry that exhibits an additional sharp resonant feature with a linewidth of 0.5 nm, in agreement with both calculated and simulated predictions.

Combined two-photon fluorescence microscopy and femtosecond laser microsurgery has many potential biomedical applications as a powerful "seek-and-treat" tool. Towards developing such a tool, we demonstrate a miniaturized probe which combines these techniques in a compact housing. The device is 10 x 15 x 40 mm(3) in size and uses an aircore photonic crystal fiber to deliver femtosecond laser pulses at 80 MHz repetition rate for imaging and 1 kHz for microsurgery. A fast two-axis microelectromechanical system scanning mirror is driven at resonance to produce Lissajous beam scanning at 10 frames per second. Field of view is 310 microm in diameter and the lateral and axial resolutions are 1.64 microm and 16.4 microm, respectively. Combined imaging and microsurgery is demonstrated using live cancer cells.

We present a handheld dual-axes confocal microscope that is based on a two-dimensional microelectromechanical systems (MEMS) scanner. It performs reflectance and fluorescence imaging at 488 nm wavelength, with three-dimensional imaging capability. The fully packaged microscope has a diameter of 10 mm and acquires images at 4 Hz frame rate with a maximum field of view of 400 microm x 260 microm. The transverse and axial resolutions of the handheld probe are 1.7 microm and 5.8 microm, respectively. Capability to perform real time small animal imaging is demonstrated in vivo in transgenic mice.

We designed and constructed a single-fiber-optic confocal microscope (SFCM) with a microelectromechanical system (MEMS) scanner and a miniature objective lens. Axial and lateral resolution values for the system were experimentally measured to be 9.55 mum and 0.83 mum respectively, in good agreement with theoretical predictions. Reflectance images were acquired at a rate of 8 frames per second, over a 140 mum x 70 mum field-of-view. In anticipation of future applications in oral cancer detection, we imaged ex vivo and in vivo human oral tissue with the SFCM, demonstrating the ability of the system to resolve cellular detail.

We study optical spectral filter synthesis with arrays of piston-actuated micro-mirrors. We propose two algorithms for the calculation of the positions of the micro-mirrors, giving us control of both the amplitude and phase of the synthetic filter. Both algorithms for filter synthesis are explored in an analytic version and in numerical searches for the least deviations between the target and the synthesized filter. We measure the quality of the filter both in terms of the deviations and in filter transmissivity, and present results of numerical simulations for a wide selection of target filters. We find that numerical searches can sometimes yield considerable improvement in the filter synthesis compared to the analytic approximation.

We present a single fiber reflectance confocal microscope with a two dimensional MEMS gimbaled scanner. Achieved lateral and axial resolutions are 0.82 mum and 13 mum, respectively. The field of view is 140 x 100 mum at 8 frames/second. Images and videos of cell phantoms and tissue are presented with sub-cellular resolution.

It was recently demonstrated that a photonic crystal slab can function as a mirror for externally incident light along a normal direction with near-complete reflectivity over a broad wavelength range. We analyze the angular and polarization properties of such photonic crystal slab mirror, and show such reflectivity occurs over a sizable angular range for both polarizations. We also show that such mirror can be designed to reflect one polarization completely, while allowing 100% transmission for the other polarization, thus behaving as a polarization splitter with a complete contrast. The theoretical analysis is validated by comparing with experimental measurements.