Search

We demonstrate strontium (Sr) atomic vapor cells having a total external volume of 0.63 cm3 that can operate above 300 °C for times exceeding 380 h. The cells are fabricated using micromachined silicon frames anodically bonded to glass windows that have a 20-nm thick protective layer of Al2O3 deposited on the interior surfaces. The presence of Sr vapor in the cell is confirmed through laser absorption spectroscopy for the 1S0 → 1P1 transition in Sr at 461 nm. Measurements of sub-Doppler linewidths indicated negligible (

We demonstrate a novel way to form and deplete a vapor-cell magneto-optic trap (MOT) using a reversible, solid-state alkali-metal source (AMS) via an applied polarized voltage. Using ~100 mW of electrical power, a trapped-atom number of 5x10^6 has been achieved starting from near zero and the timescales of the MOT formation and depletion of ~1 s. This fast, reversible, and low power alkali-atom source is desirable in both tabletop and portable cold-atom systems. The core technology of this device should translate readily to other alkali and alkaline-earth elements that could find a wide range of uses in cold-atom systems and instruments., Comment: 7 pages

We measure the number of atoms N trapped in a conventional vapor-cell magneto-optic trap (MOT) using beams that have a diameter d in the range 1-5 mm. We show that the N is proportional to d(3.6) scaling law observed for larger MOTs is a robust approximation for optimized MOTs with beam diameters as small as 3 mm. For smaller beams, the description of the scaling depends on how d is defined. The most consistent picture of the scaling is obtained when d is defined as the diameter where the intensity profile of the trapping beams decreases to the saturation intensity. Using this definition, N scales as d(6) for d

Laser spectroscopy of atoms confined in vapor cells can be strongly affected by the presence of background gases. A significant source of vacuum contamination is the permeation of gases such as helium (He) through the walls of the cell. Aluminosilicate glass (ASG) is a material with a helium permeation rate that is many orders of magnitude lower than borosilicate glass, which is commonly used for cell fabrication. We have identified a suitable source of ASG that is fabricated in wafer form and can be anodically bonded to silicon. We have fabricated chip-scale alkali vapor cells using this glass for the windows and we have measured the helium permeation rate using the pressure shift of the hyperfine clock transition. We demonstrate micro fabricated cells with He permeation rates at least three orders of magnitude lower than that of cells made with borosilicate glass at room temperature. Such cells may be useful in compact vapor-cell atomic clocks and as a micro fabricated platform suitable for the generation of cold atom samples.

We demonstrate theoretically and experimentally self-quenching of the fundamental semiconductor laser frequency fluctuations to a level that is orders of magnitude below the Schawlow-Townes limit for a solitary laser. It is shown that the main operative mechanism is the combined action of a frequency-dependent internal loss and amplitude-to-phase coupling. The internal frequency-dependent loss is introduced by means of spectrally narrow external optical feedback, which provides a strong frequency-dependent dispersion. Linewidth reduction by a factor of 2 x 10(3) is demonstrated by using a narrow Doppler-free Faraday resonance in Cs vapor.

We have studied the noise in the optical rotation of a linearly polarized laser beam transmitted through a spin-polarized (133)Cs vapor as a function of its frequency detuning from the optical resonance. Our measurements demonstrate the direct conversion of the laser-frequency noise into optical rotation noise by the dispersive response of the atomic vapor. We describe this noise-conversion process in terms of a simple model that can be used to optimize the performance of atomic devices, such as atomic magnetometers, that use optical rotation as their operational signal.

We present measurements of dark-line resonances excited in cesium atoms confined in submillimeter cells with a buffer gas. The width and contrast of the resonances were measured for cell lengths as low as 100 mm. The measured atomic Q factors are reduced in small cells because of frequent collisions of atoms with the cell walls. However, the contrast of coherent population trapping resonances measured in the small cells is similar in magnitude to that obtained in centimeter-sized cells, but substantially more laser intensity is needed to excite the resonance fully when increased buffer-gas pressure is used. The effect of the higher intensity on the linewidth is reduced because the intensity broadening rate decreases with buffer-gas pressure. OCIS codes: 020.1670, 300.6260. Compact frequency references have become increasingly important for military 1 and civilian 2 applications in recent years. For many applications in the f ield of navigation (e.g., global positioning systems) and communication systems, inexpensive miniature references with frequency stabilities in the 10 211 range at integration times approaching one day would be of great advantage. It has been predicted 3 that atomic clocks based on coherent population trapping (CPT) spectroscopy in millimeter-sized vapor cells might fulfill these requirements. It is well known that two phase-stable laser fields in resonance with a resonance line of the alkali atoms, and with a difference frequency equal to the hyperfine splitting, induce coherence between the two hyperfine ground

We demonstrate very high-contrast coherent population trapping(1) (CPT) resonances by using four-wave mixing in (87)Rb atoms. In the experiment, we take advantage of the spectral overlap between F=2--F(?) and F=3--F(?) optical resonances on the D1 line of (87)Rb and (85)Rb atoms, respectively, to eliminate the DC-light background from the CPT resonance signal. We observe a CPT resonance with a contrast in the range of 90%, compared with a few percent achieved by alternative methods.

We propose and demonstrate a novel technique for increasing the amplitude of coherent population trapping (CPT) resonances in open Lambda systems. The technique requires no complex modifications to the conventional CPT setup and is compatible with standard microfabrication processes. The improvement in the CPT resonance amplitude as a function of intensity of the excitation light agrees well with the theory based on ideal open and closed Lambda systems.

Progress towards simplification and improvement of the long-term stability of chip-scale atomic clocks is presented. The conventional technique of laser optical frequency and cell temperature control is compared with a novel technique which avoids the use of temperature sensors. The technique results in a simpler setup and improved long-term performance. Here, laser frequency, laser intensity, RF modulation index and vapor cell atomic density are stabilized using exclusively information from the atoms in the vapor cell. Different feedback schemes for laser intensity and frequency stabilization, as well as cell temperature control are experimentally compared. Their relevance to future design of chip-scale devices is discussed.

A novel technique for microfabricating alkali atom vapor cells is described in which alkali atoms are evaporated into a micromachined cell cavity through a glass nozzle. A cell of interior volume 1 mm3, containing 87Rb and a buffer gas, was made in this way and integrated into an atomic clock based on coherent population trapping. A fractional frequency instability of 6 x 10(-12) at 1000 s of integration was measured. The long-term drift of the F=1, mF=0-->F=2, mF=0 hyperfine frequency of atoms in these cells is below 5 x 10(-11)/day.

We have compared coherent population trapping (CPT) resonances, both experimentally and theoretically, for excitation of the D(1) and D(2) transitions of thermal (85)Rb vapor. Excitation of the D(1) line results in greater resonance contrast than excitation of the D(2) line and in a reduction in the resonance width, in agreement with theoretical expectations. These results translate into a nearly tenfold improvement in performance for the application of CPT resonances to a frequency standard or a sensitive magnetometer when the D(1) line, rather than the D(2) line, is used.

Amplitude-squeezed light with intensity fluctuations 29% below the standard quantum limit (SQL) is produced from a pump-suppressed room-temperature semiconductor laser, corresponding to 41% below the SQL after correction for detection efficiency. Excess noise, which degrades the observed squeezing, appears to be associated with the presence of weak longitudinal side modes.

We present the theory and measurements of the amplitude noise spectrum from a semiconductor laser with weak optical feedback (P(fb)/P(out) approximately 10(-6)) from an external cavity containing an element of dispersive loss. The laser noise is found to be reduced over most of the low-frequency spectrum, although an increase in the noise is observed at frequencies corresponding to multiples of the external-cavity free spectral range. The low-frequency noise reduction closely follows theoretical predictions, and a reduction of as much as 7 dB is measured at an injection current of 1.5 times the threshold current. The potential of this method for contributing to the production of amplitude-squeezed light is discussed.

We describe a novel method for semiconductor laser noise reduction that uses a combination of optical and electronic feedback. A Doppler-free Faraday resonance in Cs vapor provided both optical feedback and discrimination for an electronic feedback scheme incorporating FM sideband spectroscopy. The introduction of electronic feedback further reduced the low-frequency fluctuation noise power by more than 2 orders of magnitude, resulting in a linewidth of 1.4 kHz.