Search

The Qiangma gold deposit is hosted in the > 1.9 Ga Taihua Supergroup metamorphic rocks in the Xiaoqinling terrane, Qinling Orogen, on the southern margin of the North China Craton. The mineralization can be divided as follows: quartz-pyrite veins early, quartz-polymetallic sulfide veinlets middle, and carbonate-quartz veinlets late stages, with gold being mainly introduced in the middle stage. Three types of fluid inclusions were identified based on petrography and laser Raman spectroscopy, i.e., pure carbonic, carbonic-aqueous (CO 2 –H 2 O) and aqueous inclusions. The early-stage quartz contains pure carbonic and CO 2 –H 2 O inclusions with salinities up to 12.7 wt.% NaCl equiv., bulk densities of 0.67 to 0.86 g/cm 3 , and homogenization temperatures of 280−365 °C. The early-stage is related to H 2 O–CO 2 ± N 2 ± CH 4 fluids with isotopic signatures consistent with a metamorphic origin (δ 18 O water = 3.1 to 5.2‰, δD = − 37 to − 73‰). The middle-stage quartz contains all three types of fluid inclusions, of which the CO 2 –H 2 O and aqueous inclusions yield homogenization temperatures of 249−346 °C and 230−345 °C, respectively. The CO 2 –H 2 O inclusions have salinities up to 10.9 wt.% NaCl equiv. and bulk densities of 0.70 to 0.98 g/cm 3 , with vapor bubbles composed of CO 2 and N 2 . The isotopic ratios (δ 18 O water = 2.2 to 3.6‰, δD = − 47 to − 79‰) suggest that the middle-stage fluids were mixed by metamorphic and meteoric fluids. In the late-stage quartz only the aqueous inclusions are observed, which have low salinities (0.9−9.9 wt.% NaCl equiv.) and low homogenization temperatures (145−223 °C). The isotopic composition (δ 18 O water = − 1.9 to 0.5‰, δD = − 55 to − 66‰) indicates the late-stage fluids were mainly meteoric water. Trapping pressures estimated from CO 2 –H 2 O inclusions are 100−285 MPa for the middle stage, suggesting that gold mineralization mainly occurred at depths of 10 km. Fluid boiling and mixing caused rapid precipitation of sulfides and native Au. Through boiling and inflow of meteoric water, the ore-forming fluid system evolved from CO 2 -rich to CO 2 -poor in composition, and from metamorphic to meteoric, as indicated by decreasing δ 18 O water values from early to late. The carbon, sulfur and lead isotope compositions suggest the hostrocks within the Taihua Supergroup to be a significant source of ore metals. Integrating the data obtained from the studies including regional geology, ore geology, and fluid inclusion and C–H–O–S–Pb isotope geochemistry, we conclude that the Qiangma gold deposit was an orogenic-type system formed in the tectonic transition from compression to extension during the Jurassic−Early Cretaceous continental collision between the North China and Yangtze cratons. [ABSTRACT FROM AUTHOR]

The Luoboling Cu–Mo deposit in the Zijinshan Orefield, Fujian province, southeastern China, is a large porphyry deposit hosted by the Sifang granodiorite and the Luoboling granodiorite porphyry. The largest Cu–Mo orebody is saddle-shaped with various types of hydrothermal veinlets. Intensive hydrothermal alteration in the deposit is characterized by outward zoning from potassic, overprinted by phyllic alteration, to phyllic and alunite–dickite alteration. Based on the mineral assemblages and crosscutting relationships of veins, the ore-forming process can be divided into three stages, namely: an early-stage K-feldspar+quartz±magnetite±molybdenite veins associated with potassic alteration; a middle-stage quartz+molybdenite+chalcopyrite+pyrite veins in phyllic zone; and a late-stage quartz±gypsum veins in the phyllic and alunite–dickite alteration zones. Six molybdenite separates yield a Re−Os isochron age 104.6±1.0Ma, which is identical to the age of emplacement of the Sifang and Luoboling granodiorite porphyries. Three types of fluid inclusions (FIs) were observed at the Luoboling deposit: 1) NaCl–H2O (aqueous), 2) daughter mineral-bearing and 3) CO2–H2O fluid inclusions. FIs of the early and middle stages are predominantly vapor-rich aqueous and daughter mineral-bearing inclusions, together with minor CO2-rich and liquid-rich aqueous inclusions; whereas the late-stage minerals only contain liquid-rich aqueous inclusions. Homogenization temperatures and salinities of FIs trapped in the early-stage minerals range from 420 to 540°C and 0.4 to 62.9wt.% NaCl equiv., respectively. FIs of the middle-stage yield homogenization temperatures of 340 to 480°C and salinities of 0.5 to 56.0wt.% NaCl equiv. CO2 content and the oxygen fugacity (indicated by daughter minerals) of FIs trapped in middle-stage minerals are lower than those in the early stage. The liquid-rich aqueous inclusions of the late-stage homogenize at temperatures of 140 to 280°C, yielding salinities of 0.4 to 8.4wt.% NaCl equiv. The minimum estimated pressures of the three stages are 30–70MPa, 10–40MPa and 1–10MPa, respectively, corresponding to minimum ore-forming depths of 1–2.8km. Fluids trapped in early, middle and late stages yield δD values of −67‰ to −54‰, −54‰ to −70‰, and −62‰, and δ18O values of 5.4‰ to 6.7‰, 2.8‰ to 4.2‰, and −2.1‰, respectively. Fluid boiling, which resulted in the formation of stockworks and the precipitation of sulfides, occurred in the early and middle stages. The fluids subsequently evolved into a low temperature, low salinity system in the late stage, along with an input of meteoric water. The Luoboling porphyry Cu–Mo system was developed in a transition from continental arc to back-arc extension region, which was related to the westward subduction of the paleo-Pacific plate beneath the Huanan Orogen. [ABSTRACT FROM AUTHOR]

Abstract: The Wulasigou Cu deposit occurs as veins controlled by a NW-trending structure in a Devonian volcano-sedimentary basin of the Altay orogenic belt, Xinjiang, China. Igneous and sedimentary rocks exposed in the area have undergone greenschist-facies metamorphism. The ore-forming process can be divided into early, middle, and late stages, represented by, respectively, pyrite-quartz, polymetallic sulfide-quartz, and carbonate–quartz veins, veinlets, and/or replacement bodies. The early veins were deformed and brecciated during a compressional or transpressional event. The middle-stage veinlets filled fractures in the early-stage vein and alteration assemblages, and are undeformed, suggesting a tensional shear setting. The late-stage veinlets are mainly open-space fissure fillings that cut veins and replacement bodies formed in the earlier stages. Four types of fluid inclusions (FIs), including aqueous (W-type), mixed carbonic-aqueous (M-type), purely carbonic (C-type) and daughter mineral-bearing (S-type), have been identified in copper-related quartz and calcite from the Wulasigou deposit. The early-stage quartz contains M- and W-type primary FIs that completely homogenized at temperatures of 322–412°C with low salinities of 0.9–6.5wt.% NaCl equiv. In contrast, the late-stage quartz or calcite contains only the W-type FIs with homogenization temperatures of 101–234°C, and salinities of 0.9–2.9wt.% NaCl equiv. This indicates that the metallogenic system evolved from CO2-rich, metamorphic to CO2-poor, through input of meteoric fluids. All four types of FIs can only be observed in the middle-stage minerals, where they show evidence of vein formation during an episode of fluid immiscibility. These FIs homogenized at temperatures ranging mainly from 230 to 347°C, with salinities clustering 2.7–10.2wt.% NaCl equiv for the W-, M- and C-types, and 34.7–38.2wt.% NaCl equiv for the S-type, respectively. The metal precipitation resulted from a decrease in copper solubility during the fluid immiscibility episode. The estimated trapping pressures for the middle-stage fluids are 1.55–3.55kbar, suggesting an alternating lithostatic-hydrostatic fluid-system, controlled by fault-valve activity at a depth of 13–15.5km. Muscovite separates from the middle-stage polymetallic-quartz veinlets yield a well-defined 40Ar/39Ar isotopic plateau age of 219.41±2.10Ma, and an 39Ar/36Ar - 40Ar/36Ar isochron age of 219.73±2.17Ma. This age postdates the final Paleo-Asia Ocean closure (at ca. 250Ma) by about 30Ma, and indicates that the Cu mineralization at Wulasigou has occurred in the Triassic continental collision setting. Hence, the Wulasigou Cu deposit may be the first example of orogenic lode Cu deposits formed in accretionary orogeny or continental collision. [Copyright &y& Elsevier]