Search

An accurate model of a foil bearing supported rotor needs to cover rotor dynamics of the shaft, structure dynamics of the foil as well as hydro‐ and thermo dynamics in the fluid film. The paper addresses the incorporation of tilting motions of the shaft and its influence on the foil deflection, which in turn results in a more accurate prediction of the stability threshold of the rotor‐bearing system. [ABSTRACT FROM AUTHOR]

The force response of squeeze film dampers and hydrodynamic bearings is significantly influenced by the occurence of cavitation inside the lubricant films. The viscosity of the occuring mixture of oil and air bubbles is vastly different than that of pure lubricant and therefore changes the pressure build‐up and thereby the stiffness and damping properties of the lubrication films. To accurately predict the force response of a squeeze film damper, the cavitation and its effect on the pressure build‐up therefore has to be taken into account. Well known cavitation algorithms for lubrication problems, like the Elrod algorithm or the two‐phase‐model, neglect the transient nature of outgassing and assume instantaneous bubble formation and collapse. In the presented paper, a transient bubble dynamics model based on the Rayleigh‐Plesset‐Scriven equation is utilised instead and its effect on the rotordynamic behaviour of a turbocharger rotor is examined based on fully transient multi body dynamics simulations. [ABSTRACT FROM AUTHOR]

Although the use of combustion engines will decrease in passenger cars due to ecological reasons, turbochargers (TC) as typical applications with floating ring bearings will furthermore be applied in other applications like combined heat and power plants, ships or emergency backup generators for data processing service center and similar systems. Thus, the development of TC concerning rotor‐ and hydrodynamics is an important task, which leads due to the non‐linear behaviour to the necessity of advanced simulations for improving the performance. [ABSTRACT FROM AUTHOR]

Despite many advantages, hydrodynamic bearings tend to induce nonlinear vibrations on rotor systems at low external loads. The occurrence and also the amplitudes of these vibrations are very sensible to the operating conditions of the system such as occurrence of gaseous cavitation, oil viscosity (strongly dependent on oil temperature), bearing clearance (dependent on metal temperature and thermal expansion coefficients) or rotor imbalance. This contribution shows the calculation of nonlinear rotor oscillations with the help of a detailed transient 3D‐thermo‐hydrodynamic bearing model. Referring to experimental data of a real exhaust turbocharger with semi‐floating ring bearings, this holistic approach is used for a separate investigation of a) the influences of the temperature‐dependent oil viscosity in the lubricating films and b) the influences of temperature‐related changes in the lubricating gap on the nonlinear oscillations of the rotor. [ABSTRACT FROM AUTHOR]