Search

In this paper, we have studied numerically thermo-convective characteristics between a heat transfer fluid (HTF) and phase change material (PCM) in shell and tube thermal energy storage (TES) unit. The paraffin wax is considered as a PCM, filled in a shell which is thermally isolated with the external environment, while the water plays a role of a HTF and flows inside the tube at the moment of charging and discharging cycle. The heat transfer between HTF and PCM is performed by conduction and forced convection, this transfer allows to change the physical state of PCM solid-liquid to obtain a quantity of storable heat in order to create a thermal battery. Enthalpy formulation is used to analyze the heat transfer during melting and solidification process. A good agreement was found between our numerical predictions and the results of the literature. On the other hand, we have investigated the effect of geometrical parameters (tube length and shell diameter) and Reynolds number on the charging and discharging cycles. The obtained results reveal that the tube length and the shell diameter are the most influential parameters on the time of storage system. Similarly, the Reynolds number has much impact on the HTF outlet temperature and the time of solidification and melting process. Furthermore, we have proposed a new thermal storage unit containing the Paraffin wax and RT60 that it gives us a good rate and time of storage compared to the first unit that has only the paraffin wax. [ABSTRACT FROM AUTHOR]

In this paper, a numerical study on the two-dimensional laminar mixed convective flow and heat transfer from an rotating circular horizontal and isothermal cylinder confined in a horizontal channel. The blockage ratio and the Prandtl number are fixed at 0.05 and 0.7 respectively. The continuity, momentum and energy equations are solved via the finite-volume method. Our results are in very good agreement with those resulting from preceding studies to Ri=0 and a=0, which makes it possible to validate on important extension of present work. The mixed convective flow and heat transfer is simulated by the Reynolds number is studied in the range 1

A two-dimensional (2D) numerical model was used to simulate the use of a phase change material linked to a PV system to control the temperature rise of the PV cells. The predicted temperatures using the 2D model have been compared with experimental and numerical data of the literature and a good agreement was obtained for both the isotherm contours and time evolution of the temperature. An extended surface (fins) has been used in order to improve conductive heat transfer and to reinforce the thermal homogeneity. Concerning the inner fins included on the PV panel (Front), the obtained results show that these fins reduce significantly the temperature. Furthermore, the configurations of L = 25, 30 and 35 mm allow better cooling of the PV panel. On the other hand, the back inner fin used reduces dramatically the performance of the PV/PCM system for cooling the panel. [ABSTRACT FROM AUTHOR]