Search

The aim of this study was to formulate and evaluate SR matrix pellets containing losartan potassium (LP) solid dispersion using extrusion-spheronization technique to minimize the fluctuation of its plasma concentration. LP solid dispersions were prepared by using different hydrophobic polymers at different weight ratios (0.5, 1, 2, and 5%). LP-Eudragit RS solid dispersion at 1:5 ratio resulted in slower drug release (only 20% of LP was released in about 8 h). Different concentrations of hydrophilic polymer, PEG 6000, were mixed with Avicel ® PH 101 to prepare the LP SR matrix pellets containing solid dispersion using 3 2 full factorial design to evaluate the effects of formulation parameters on the pellets attributes. The magnitude of torque for the pellet wet masses and binder ratio were decreased significantly with increasing PEG 6000 concentration. LP sustained release pellet formula composed of 9.24% PEG 6000 and 8 × 10 -9 % PVP K30 solution was chosen as optimized formula. Pharmacokinetic studies revealed that calculated t max was 9.72 ± 2.22 h from the optimized sustained release pellets compared to 2.11 ± 0.49 h in case of Cozaar ® immediate release tablet, indicating a slower release of the LP from pellets.

This study aimed to optimize the preparation process of albendazole (ABZ) solid dispersion (SD) and enhance its dissolution rate and oral bioavailability in dogs. The ABZ-SD formulations were prepared by a fusion method with ABZ and polyethylene glycol 6000 (PEG 6000), poloxamer 188 (P 188) polymers at various weight ratios or the combination of PEG 6000&P 188. The characterizations of the optimal formulations were performed by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), in vitro dissolution test and molecular docking. The in vivo pharmacokinetic study was conducted in beagle dogs. As a result, ABZ solid dispersion based on PEG 6000&P 188 (1:2) was successfully prepared. The ABZ-SD formulation could significantly improve the apparent solubility and dissolution rate of ABZ compared with commercial tablets. Furthermore, the water solubility of ABZ-SD was improved mainly based on hydrogen bond association. Besides, at an oral dosage of 15 mg/kg ABZ, the SDs had higher Cmax values and areas under the curve (AUCs) compared to those of commercial ABZ tablets. Preparation of ABZ-loaded SDs by PEG 6000&P 188 is a promising strategy to improve the oral bioavailability of ABZ.

Metoclopramide (MCP) can effectively alleviate motion sickness-caused nausea and vomiting. Nasal administration offers the greatest patient compliance. It is suitable for self-administration and offers rapid and complete absorption, no first-pass effects and high bioavailability. In the present study, a MCP nasal spray was prepared and evaluated in vitro and in vivo. Nasal cilia toxicity of Bufo toads was used to screen the preservative types and concentrations. Rabbit nasal mucosa was used to evaluate the mucosa permeability of different MCP nasal sprays with different penetration enhancers and preservative. A three-period crossover trial was then carried out in beagle dogs with three different MCP dosage forms: nasal sprays, oral tablets and intramuscular (IM) solution. Liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) was performed to measure dog plasma MCP, and pharmacokinetic parameters were calculated. The results of ciliatoxicity and permeation study showed that 0.03% methyl paraben lacking penetration enhancers was optimal. Compared to control IM, the bioavailability of oral tablets of MCP was 24.9%, while that of nasal spray was 62.3%. Meanwhile time-to-maximal plasma concentration (T max ) of nasal spray was significantly shorter than that of oral tablets. In conclusion, MCP nasal spray prepared here is safe with minimal ciliatoxicity, rapid onset and high relative bioavailability.

Context: Tablet disintegration is an important factor for drug release and can be modified with excipients called tablet disintegrants. Tablet disintegrants act via different mechanisms and the efficacy of these excipients is influenced by various factors., Objective: In this review, the existing literature on tablet disintegration is critically reviewed. Potential disintegration mechanisms, as well as impact factors on the disintegration process will be discussed based on experimental evidence., Methods: Search terms for Scopus and Web of Science included "tablet disintegration", "mechanism tablet disintegration", "superdisintegrants", "disintegrants", "swelling force", "disintegration force", "disintegration mechanisms", as well as brand names of commonly applied superdisintegrants. References of identified papers were screened as well., Results: Experimental data supports swelling and shape recovery as main mechanisms of action of disintegrants. Other tablet excipients and different manufacturing techniques greatly influence the disintegration process., Conclusion: The use of different excipients, experimental setups and manufacturing techniques, as well as the demand for original research led to a distinct patchwork of knowledge. Broader, more systematic approaches are necessary not only to structure the past but also future findings.

This work aimed to incorporate Dexibuprofen (DXI), the pharmacologically active and more potent form of ibuprofen, into polymeric micelles based tablets with enhanced oral bioavailability. Thin film hydration technique was employed to prepare DXI polymeric micelles using Pluronic® F127 and/or P123 solutions in different ratios (ranging from 1:1 up to 1:10). Prepared micelles were characterized regarding particle size, drug loading and entrapment efficiency. Selected formulae were lyophilized in presence of cryoprotectants and subjected to solid-state characterization as well as scanning and transmission electron microscopy. Subsequently, tablets were prepared and evaluated in-vitro regarding physical properties and drug release. An in-vivo pharmacokinetic study was performed in six healthy human volunteers in comparison to the commercially available tablet of DXI. Solid-state characterization proved that DXI was homogenously dispersed in Pluronic micelles' matrices. Formula TF5 tablets comprising lyophilized micelles (F5; DXI: Pluronic F127 in 1:1 ratio and 0.25% mannitol) showed higher Cmax and earlier tmax values than those of the commercial formula, where the relative bioavailability was calculated to be 160.15%. The experimental evidence in this research leads to the conclusion that polymeric micelles present enabling properties for oral delivery of drugs with low solubility.

The objective of this study was to develop controlled porosity osmotic pump (CPOP) tablets of diclofenac sodium (DS). The influence of different cores (polymers and osmogens) and coats (thickness and porosigen content) on DS release were studied. Results revealed that decreasing HPMC viscosity grade from 4000cp (K4M) to 15cp (E15) increased DS release. While increasing the tablet coat thickness decreased DS release. The presence of osmogen increased DS release in the following rank: mannitol > lactose > avicel. There was a direct relationship between increasing PEG-400 in the coating solution and the amount of drug released in all formulations studied, except in one condition. A comparative bioavailability study using a selected CPOP formulation (T) versus the innovator product (R) revealed that CPOP tablet maintained a less fluctuated DS plasma concentration for up to 24 h with a detected mean Cmax of 836.8 ± 142.4 and 445.0 ± 81.0 ng/mL for R and T, respectively. There were no statistically significant differences between R and T, concerning AUC0-24 and AUC0-∞. Moreover, the appearance of the multi-peak phenomenon, which is frequently observed with DS absorption, was found in only 25% of volunteers in case of T versus 75% in case of R.

The objective of this study was to design oral controlled release (CR) matrix tablets of Milnacipran using hydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of various formulation factors such as polymer proportion, polymer viscosity, compression force and also the pH of dissolution medium on the in-vitro release of drug. Two viscosity grade of HPMC (15 K and 100 K) were used in the proportion of 50, 100, 150 and 200 mg per CR tablet. In-vitro release rate was characterized using various model dependent approaches and model independent dissolution parameters [T50% and T80% dissolution time, mean dissolution time (MDT), mean residence time (MRT), dissolution efficiency (DE)]. The statistical analysis was performed on all the model independent approaches using student t test and ANOVA. Results were found that as polymer concentration (50 mg to 200 mg) and viscosity (15 K to 100 K) increases, the MDT, MRT, T50% and T80% extended significantly. Drug release rate was found to be significantly different at different hardness. In-vivo human plasma concentration--time profile was predicted from in-vitro release data using convolution method. Predicted human pharmacokinetic parameters shows that the design CR formulation has capability to sustained the plasma drug level of milnacipran.

The aim of this work is to improve the oral bioavailability of poorly water soluble drug, simvastatin (SV) through combining the advantages of self-nanoemulsifying systems (SNEs) and tablets. Ternary phase diagram was constructed using Labrafil, Tween 80 and Transcutol, in order to evaluate self-nanoemulsification domain. The particle size distribution and zeta potential of the prepared systems were evaluated using Malvern Zetasizer. Liquisolid powders were prepared using Aeroperl(®) as a coating material and Avicel(®) or Starch 1500 as carrier materials, the powder flow properties were then evaluated. Compressed SV SNE based tablets were evaluated regarding their physical characteristics, in-vitro release properties as well as in-vivo pharmacokinetic evaluation in six healthy human volunteers using a validated LC/MS/MS method. The in-vitro release results revealed that the developed SNE based tablets improved the release of SV significantly, compared to commercially available SV tablets (Zocor(®)). The optimal SV SNE tablet formulation was S3St10 (10% Labrafil, 60% Tween 80, and 30% Transcutol). The in-vivo evaluation of S3St10 revealed that rapid and enhanced absorption of SV could be obtained from the SNE based tablet, with a 1.5 fold increase in bioavailability than that obtained after administration of Zocor(®). Hence such an approach could be promising in improving the bioavailability of SV.

The objective of this investigation was to develop the cefuroxime axetil sustained-release floating tablets to prolong the gastric residence time and compare their pharmacokinetic behavior with marketed conventional tablets (Zocef). The floating tablets were developed using polymers like HPMC K4M and HPMC K100M alone, and polymer combination of HPMC K4M and Polyox WSR 303 by effervescent technique. Tablets were prepared by slugging method and evaluated for their physical characteristics, in vitro drug release, and buoyancy lag time. The best formulation (F10) was selected based on in vitro characteristics and used in vivo radiographic and bioavailability studies in healthy human volunteers. All the formulations could sustain drug release for 12 h. The dissolution profiles were subjected to various kinetic release models and it was found that the mechanism of drug release followed Peppas model. The in vivo radiographic studies revealed that the tablets remained in stomach for 225 ± 30 min. Based on in vivo performance, the developed floating tablets showed superior bioavailability than Zocef tablet. Based on in vivo performance significant difference was observed between Cmax, tmax, t1/2, AUC0-∞, and mean residence time of test and reference (p<0.05). The increase in relative bioavailability of test was 1.61 fold when compared to reference.

The objective of this study is to develop and in vivo evaluation of novel monolithic matrix mini tablets approach to control the release of galantamine hydrobromide (GAH) in comparison with desired release profile to the Innovator formulation Razadyne(®) ER capsules. The direct compression method was employed for preparation of matrix mini tablets as against reservoir multiparticulate pellets of innovator formulation. The matrix swellings, dissolution similarity, mean dissolution time and dissolution efficiency of formulations were evaluated. It was found that increase in the concentration of high viscosity hydroxypropylcellulose (HPC) results reduction in release rate. The drug release was shown to be pH dependent with faster rate at lower pH. The release of GAH followed first order shifting to dissolution dependent by increase of HPC content. The formulation showed stability of drug release. In vivo prediction was done by Wagner-Nelson method. Prediction errors were estimated for Cmax and area under curve (AUC) and found to be not exceeding 15%. In vivo study in human volunteers confirmed the similarity between test and innovator formulations and pharmacokinetic values were comparable between actual and predicted. These results suggest that novel monolithic matrix approach could be suitable technique to formulate controlled release GAH.

A liquisolid orodispersible tablet of felodipine, a BCS Class II drug, was developed to improve drug dissolution and absorption through the buccal mucosa for management of hypertensive crisis. A 24 full-factorial design was applied to optimize felodipine liquisolid systems (FLSs) having acceptable flow properties and possessing enhanced drug dissolution rates. Four formulation variables; The liquid type, X1 (PG or PEG), drug concentration, X2 (10% and 20%), type of coat, X3 (Aerosil® and Aeroperl®) and excipients ratio, X4 (10 and 20) were included in the design. The systems were assessed for dissolution and flow properties. Following optimization, the formulation components (X1, X2, X3 and X4) were PEG, 10%, Aerosil® and 20, respectively. The optimized FLS was compressed into felodipine liquisolid orodispersible tablet using Prosolv® as carrier material (FLODT-2). The in vitro and in vivo disintegration times of FLODT-2 were 9 and 7 s, respectively. The in vivo pharmacokinetic study using human volunteers showed a significant increase in dissolution and absorption rates of the formulation of FLODT-2 compared to soft gelatin capsules filled with felodipine solution in PEG under the same conditions. Our results proposed that the optimized FLODT formulation could be promising to manage hypertensive crisis.

The ultimate goal is to design a new chronotherapeutic system for theophylline (TPH) with high potential benefits in treating nocturnal asthma. TPH core tablets were prepared by wet granulation using a developed formula. Compression coating over core tablets containing 200 mg TPH was done using granulated chitosan with 10% PVP K30. Different formulae F1, F2 and F3 were prepared using coat weights 260, 300 and 360 mg, respectively. The in vitro release characteristics in both variant pH media mimicking the gastrointestinal media and in media containing rat cecal content were monitored. The in vivo performance of the optimum formula was compared with Avolen(®) SR in Beagle dogs. F3 with high coat thickness exhibited a minimal release after 5-h release study. Both F2 and F3 showed more than 50% drug release after 4 h in the rat cecal medium. This reflects the colon selectivity of the system. The C(max) values were found to be 5.49 ± 0.46 and 5.12 ± 0.85 μg/mL for F3 and Avolen(®) SR, respectively, F3 showed higher mean plasma concentration than Avolen(®) SR from the beginning and continued till 7 h post administration indicating high potential as chronotherapeutic treatment of nocturnal asthma.

Cross-linked amylose starch (CLA), hydroxypropylmethylcellulose (HPMC), and HPMC/CLA matrices were prepared by direct compression. HPMC was used to slow down the enzymatic degradation of CLA matrices. CLA was either granulated alone and mixed with HPMC or cogranulated with the latter. Compaction characteristics of the powder, hydration and mechanical properties of the resulting matrices, as well as the release profiles of three model drugs were investigated. The results showed that wet granulation of CLA in the presence of 10% HPMC improved significantly the flow properties of the powder without compromising its compactibility. Both CLA and HPMC deformed mainly by plastic flow (yield pressures are 75 and 124 MPa, respectively), but CLA exhibited a stronger elastic component (elastic recoveries are 18.4 and 11.5%, respectively). The values of yield pressure increased linearly with the concentration of HPMC. The addition of HPMC to CLA slightly decreased the resistance to consolidation but the crushing force of the final compacts was found to be proportional to the HPMC concentration. Mechanical studies on swollen matrices revealed that CLA formed a stronger gel than HPMC or CLA/HPMC mixture, and swelling and erosion of the tablets increased with HPMC content and incubation time. The in vitro release kinetics of three model drugs (pseudeoephedrine sulfate, sodium diclofenac, and prednisone) showed a clear effect of drug solubility and presence of alpha-amylase in the dissolution medium on the release rate. The addition of HPMC to CLA protected the tablets against alpha-amylase hydrolysis and reduced the release rate of prednisone and sodium diclofenac. The release of pseudoephedrine sulfate was fast and independent of HPMC and occurred mainly by diffusion.

Elderly people, children and patients sometimes have difficulties swallowing tablets. To solve this problem, a novel method of preparing tablets that disintegrate rapidly in the mouth was developed. A tablet with high porosity is required for rapid disintegration, but such a tablet is generally fragile. To make a tablet having both high porosity and practical strength, amorphous sucrose, which has good compactability, was used. Mannitol powder with freeze-dried amorphous sucrose was tableted at low compression and stored under certain conditions. The tablet disintegrated rapidly in the mouth, because of its high porosity. The tensile strength of the tablet increased remarkably during storage, while the porosity of the tablet seemed almost unchanged. The results of thermal analysis and powder x-ray diffraction measurement showed that the amorphous sucrose in tablet crystallized during storage. The increase in the tensile strength of the tablet was due to crystallization of the amorphous sucrose and formation of new internal contact points in the tablet. It was concluded that this crystalline transition method is a very useful method to prepare a rapidly disintegrating tablet.