Search

Metamaterial analogues of electromagnetically induced transparency (EIT) enable a unique avenue to endow a coupled resonator system with quantum interference behavior, exhibiting remarkable properties in slow-wave and highly sensitive sensing. In particular, tunable and ultracompact-chip-integrated EIT-like effects reveal fantastic application prospects in plasmonic circuits and networks. Here, we demonstrate an electrically tuned on-chip EIT analogue by means of dynamic EIT modules side-coupled to ultrathin corrugated metallic strips supporting spoof surface plasmon polaritons (SSPPs). By embedding PIN diodes into the subradiant mode, on-to-off control of the destructive coupling between the radiative and subradiant modes results in dynamic chip-scale EIT-like behavior under the change of the bias voltage, allowing for an electrically tunable group delay of the surface waves. The physical mechanism of the active modulation is elucidated with the coupled mode theory. In addition, the cascaded capacity performed by installing multiple EIT modules with an interval of equivalent wavelength are also characterized on a planar plasmonic waveguide. The proposed system will pave a versatile route toward dynamic control in chip-scale functional devices.

Mode-division multiplexing (MDM) is a promising multiplexing technique to further improve the transmission capacity of optical communication and on-chip optical interconnection systems. Furthermore, the multimode optical switch is of great importance in the MDM system, since it makes the MDM system more flexible by directly switching multiple spatial signals simultaneously. In this paper, we proposed a mode-independent optical switch based on the graphene–polymer hybrid waveguide platform that could process the TE11, TE12, TE21 and TE22 modes in a few-mode waveguide. The presented switch is independent of the four guided modes, optimizing the buried position of graphene capacitors in the polymer waveguide to regulate the coplanar interaction between the graphene capacitors and spatial modes. The TE11, TE12, TE21 and TE22 modes can be regulated simultaneously by changing the chemical potential of graphene capacitors in a straight waveguide. Our presented switch can enable the independent management of the spatial modes to be more flexible and efficient and has wide application in the MDM transmission systems.

Mode multiplexers/demultiplexers (MUX/deMUX) are key components in mode division multiplexing. A silica waveguide mode MUX consisting of four cascaded directional couplers is experimentally demonstrated. The beam propagation method is used in the device design and optimization. Thermal oxidation, plasma-enhanced chemical vapor deposition, and ultraviolet photolithography are adopted in the silica waveguide mode MUX fabrication. The measurement results prove that the input E00 mode can be selectively converted to E10 mode, E20 mode, and E30 mode. Within the wavelength range of 1500 to 1620 nm, the insertion loss is less than 12.2 dB. The proposed mode MUX has good potential in on-chip MDM applications.

A polarization-insensitive graphene-assisted electro-optic modulator is proposed. The orthogonal T-shaped metal slot hybrid plasmonic waveguide allows the polarization-independent propagation of transverse electric field mode and complex mode. By the introduction of dual-layer graphene on the ridge waveguide, the polarization-insensitive modulation depths of the TE mode and complex mode are 0.511 dB/µm and 0.502 dB/µm, respectively. The 3 dB bandwidth of the modulator we have proposed is about 127 GHz at the waveguide length of 20 μm. The power consumption of 72 fJ/bit promised potential graphene electro-optic modulator applications for on-chip interconnected information transfer and processing.

A narrow-band Bragg grating filter based on a long-range surface plasmon polariton (LRSPP) waveguide is theoretically demonstrated. The three-dimensional Au stripe that is embedded in polymer SU-8 acts as both the waveguide and the heating electrode. With the eigen mode expansion and finite element method optimizations, the proposed filter shows a reflectivity of 0.578 and a 3 dB bandwidth of 1.1 nm. The central wavelength can be tuned from 1549.9 nm to 1544.3 nm by varying temperature from 25 °C to 75 °C, while maintaining the optical return loss at −2.5 dB. This proposed tunable filter has potential in on-chip light signal processing.

In this work, we have proposed and designed a 1 × 1 optical switch based on the optical phase-change material, Ge2Sb2Se4Te1 (GSST), for GSST-assisted silicon racetrack microring. Its optical power can periodically be exchanged between the straight silicon waveguide and the GSST/Si hybrid racetrack waveguide due to the formed directional coupling structure. By changing GSST from the crystalline state to the amorphous state, the switch shifts from the ON state to the OFF state, and vice versa. With finite-difference time-domain method optimization, the proposed switch shows an extinction ratio of 18 dB at 1547.4 nm. The insert losses at the ON and OFF states are both less than 1 dB. The proposed switch unit has the potential to build an N × N switch matrix.