Search

This paper deals with the development and analysis of D-Shaped photonic crystal fiber (PCF) biosensors using surface plasmon resonance (SPR). A thin metal layer is deposited on the outer flat surface of the PCF that behaves as the plasmonic material. Analyte is filled in the outermost peripheral region of metal layer. Finite element method (FEM) with perfectly matched layer (PML) is applied to analyze the proposed sensors. Mode analysis is performed on the proposed structures to evaluate various parameters of SPR-based PCF sensors. Three D-shaped PCF structures have been proposed with silver (Ag), gold (Au) and two-half layers of both (Ag-Au) on its flat surface. The first two structures are analyzed to the range of wavelength where the SPR will occur to facilitate understanding of the third structure. It is observed that the structures with one metal have only one sensitive plasmonic peak whereas the structure with two metal layers has two sensitive plasmonic peaks, making it suitable candidate for two-molecule sensing present in a sample analyte. Good sensitivities and resolutions are achieved for both plasmonic peaks.

We study the polarization properties of suspended core microstructured optical fibers (SC-MOFs) with hexagonal lattice structure and high air-filling fraction having a single gold-filled hole along the horizontal axis. The interaction between the core-guided light and metal leads to surface plasmon resonance (SPR) at particular frequencies where the phase-matching condition is satisfied. We observe from the modal analysis that MOFs with high air-filling fraction offer the possibility of coupling of the fundamental mode with the first-order surface plasmon polariton (SPP) mode. With the increase in the suspension factor (SF), the fundamental mode couples with higher order SPP modes and the coupling strength also enhances. It also leads to an increase in modal birefringence. Reduction in beat length by an order of magnitude compared to the reported values is being reported for the first time to our knowledge. We have achieved the lowest beat length of 0.0105 mm at 1 μm wavelength for the structure having d/Λ = 0.85 and SF = 1.65. The results show that such plasmonic SC-MOFs may perform as efficient in-fiber polarizers and polarization filters.