Search

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs. [ABSTRACT FROM AUTHOR]

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing. [ABSTRACT FROM AUTHOR]

Research paper recommenders emerged over the last decade to ease finding publications relating to researchers’ area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user’s expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list. [ABSTRACT FROM AUTHOR]

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a “dying” paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing “offspring”. Practically, this might be used to trace the successive published milestones of a research field. [ABSTRACT FROM AUTHOR]

Although interdisciplinarity is often touted as a necessity for modern research, the evidence on the relative impact of sectorial versus to interdisciplinary science is qualitative at best. In this paper we leverage the bibliographic data set of the American Physical Society to quantify the role of interdisciplinarity in physics, and that of talent and luck in achieving success in scientific careers. We analyze a period of 30 years (1980-2009) tagging papers and their authors by means of the Physics and Astronomy Classification Scheme (PACS), to show that some degree of interdisciplinarity is quite helpful to reach success, measured as a proxy of either the number of articles or the citations score. We also propose an agent-based model of the publication-reputation-citation dynamics which reproduces the trends observed in the APS data set. On the one hand, the results highlight the crucial role of randomness and serendipity in real scientific research; on the other, they shed light on a counterintuitive effect indicating that the most talented authors are not necessarily the most successful ones. [ABSTRACT FROM AUTHOR]

Map-matching technology is a key and difficult technology in the development of vehicle navigation systems. Only by correctly identifying the road segment on which the vehicle is traveling can the navigation system make the right decision. At the same time, the complexity of the road network structure and a variety of error factors have introduced great challenges to map matching and have attracted the attention of many researchers as well. This paper analyzes various map-matching algorithms, determines that the key to the matching performance is the junction matching, performs an in-depth study on the junction-matching problem, and puts forward the junction decision domain model. The model mainly involves information regarding the width of the road segment, the angle between two road segments, the accuracy of GPS and the accuracy of the road network. In this paper, we use this model to improve the map-matching algorithm based on a hidden Markov model (HMM). The experimental results show that the improved matching algorithm can effectively reduce the error rate of junction matching and improve the matching performance of a navigation system. [ABSTRACT FROM AUTHOR]

This paper, based on differential privacy protecting K-means clustering algorithm, realizes privacy protection by adding data-disturbing Laplace noise to cluster center point. In order to solve the problem of Laplace noise randomness which causes the center point to deviate, especially when poor availability of clustering results appears because of small privacy budget parameters, an improved differential privacy protecting K-means clustering algorithm was raised in this paper. The improved algorithm uses the contour coefficients to quantitatively evaluate the clustering effect of each iteration and add different noise to different clusters. In order to be adapted to the huge number of data, this paper provides an algorithm design in MapReduce Framework. Experimental finding shows that the new algorithm improves the availability of the algorithm clustering results under the condition of ensuring individual privacy without significantly increasing its operating time. [ABSTRACT FROM AUTHOR]

Recently, computational Grids have proven to be a good solution for processing large-scale, computation intensive problems. However, the heterogeneity, dynamics of resources and diversity of applications requirements have always been important factors affecting their performance. In response to these challenges, this work first builds a Grid job scheduling architecture that can dynamically monitor Grid computing center resources and make corresponding scheduling decisions. Second, a Grid job model is proposed to describe the application requirements. Third, this paper studies the characteristics of commercial interconnection networks used in Grids and forecast job transmission time. Fourth, this paper proposes an application-aware job scheduling mechanism (AJSM) that includes periodic scheduling flow and a heuristic application-aware deadline constraint job scheduling algorithm. The rigorous performance evaluation results clearly demonstrate that the proposed application-aware job scheduling mechanism can successful schedule more Grid jobs than the existing algorithms. For successful scheduled jobs, our proposed AJSM method is the best algorithm for job average processing time and makespan. [ABSTRACT FROM AUTHOR]

Peer review is the gold standard for scientific communication, but its ability to guarantee the quality of published research remains difficult to verify. Recent modeling studies suggest that peer review is sensitive to reviewer misbehavior, and it has been claimed that referees who sabotage work they perceive as competition may severely undermine the quality of publications. Here we examine which aspects of suboptimal reviewing practices most strongly impact quality, and test different mitigating strategies that editors may employ to counter them. We find that the biggest hazard to the quality of published literature is not selfish rejection of high-quality manuscripts but indifferent acceptance of low-quality ones. Bypassing or blacklisting bad reviewers and consulting additional reviewers to settle disagreements can reduce but not eliminate the impact. The other editorial strategies we tested do not significantly improve quality, but pairing manuscripts to reviewers unlikely to selfishly reject them and allowing revision of rejected manuscripts minimize rejection of above-average manuscripts. In its current form, peer review offers few incentives for impartial reviewing efforts. Editors can help, but structural changes are more likely to have a stronger impact. [ABSTRACT FROM AUTHOR]

Increasingly, scholarly articles contain URI references to “web at large” resources including project web sites, scholarly wikis, ontologies, online debates, presentations, blogs, and videos. Authors reference such resources to provide essential context for the research they report on. A reader who visits a web at large resource by following a URI reference in an article, some time after its publication, is led to believe that the resource’s content is representative of what the author originally referenced. However, due to the dynamic nature of the web, that may very well not be the case. We reuse a dataset from a previous study in which several authors of this paper were involved, and investigate to what extent the textual content of web at large resources referenced in a vast collection of Science, Technology, and Medicine (STM) articles published between 1997 and 2012 has remained stable since the publication of the referencing article. We do so in a two-step approach that relies on various well-established similarity measures to compare textual content. In a first step, we use 19 web archives to find snapshots of referenced web at large resources that have textual content that is representative of the state of the resource around the time of publication of the referencing paper. We find that representative snapshots exist for about 30% of all URI references. In a second step, we compare the textual content of representative snapshots with that of their live web counterparts. We find that for over 75% of references the content has drifted away from what it was when referenced. These results raise significant concerns regarding the long term integrity of the web-based scholarly record and call for the deployment of techniques to combat these problems. [ABSTRACT FROM AUTHOR]

Biometric recognition technology based on eye-movement dynamics has been in development for more than ten years. Different visual tasks, feature extraction and feature recognition methods are proposed to improve the performance of eye movement biometric system. However, the correct identification and verification rates, especially in long-term experiments, as well as the effects of visual tasks and eye trackers’ temporal and spatial resolution are still the foremost considerations in eye movement biometrics. With a focus on these issues, we proposed a new visual searching task for eye movement data collection and a new class of eye movement features for biometric recognition. In order to demonstrate the improvement of this visual searching task being used in eye movement biometrics, three other eye movement feature extraction methods were also tested on our eye movement datasets. Compared with the original results, all three methods yielded better results as expected. In addition, the biometric performance of these four feature extraction methods was also compared using the equal error rate (EER) and Rank-1 identification rate (Rank-1 IR), and the texture features introduced in this paper were ultimately shown to offer some advantages with regard to long-term stability and robustness over time and spatial precision. Finally, the results of different combinations of these methods with a score-level fusion method indicated that multi-biometric methods perform better in most cases. [ABSTRACT FROM AUTHOR]

The nodes and their connection relationships are the two main bodies for dynamic complex networks. In existing theoretical researches, the phenomena of stabilization and synchronization for complex dynamical networks are generally regarded as the dynamic characteristic behaviors of the nodes, which are mainly caused by coupling effect of connection relationships between nodes. However, the connection relationships between nodes are also one main body of a time-varying dynamic complex network, and thus they may evolve with time and maybe show certain characteristic phenomena. For example, the structural balance in the social networks and the synaptic facilitation in the biological neural networks. Therefore, it is important to investigate theoretically the reasons in dynamics for the occurrence. Especially, from the angle of large-scale systems, how the dynamic behaviors of nodes (such as the individuals, neurons) contribute to the connection relationships is one of worthy research directions. In this paper, according to the structural balance theory of triad proposed by F. Heider, we mainly focus on the connection relationships body, which is regarded as one of the two subsystems (another is the nodes body), and try to find the dynamic mechanism of the structural balance with the internal state behaviors of the nodes. By using the Riccati linear matrix differential equation as the dynamic model of connection relationships subsystem, it is proved under some mathematic conditions that the connection relationships subsystem is asymptotical structural balance via the effects of the coupling roles with the internal state of nodes. Finally, the simulation example is given to show the validity of the method in this paper. [ABSTRACT FROM AUTHOR]

Past research on the process of extinguishing a fire typically used a traditional linear water jet falling point model and the results ignored external factors, such as environmental conditions and the status of the fire engine, even though the water jet falling point location prediction was often associated with these parameters and showed a nonlinear relationship. This paper constructed a BP (Back Propagation) neural network model. The fire gun nozzle characteristics were included as model inputs, and the water discharge point coordinates were the model outputs; thus, the model could precisely predict the water discharge point with small error and high precision to determine an accurate firing position and allow for the timely adjustment of the spray gun. To improve the slow convergence and local optimality problems of the BP neural network (BPNN), this paper further used a genetic algorithm to optimize the BPNN (GA-BPNN). The BPNN can be used to optimize the weights in the network to train them for global optimization. A genetic algorithm was introduced into the neural network approach, and the water jet landing prediction model was further improved. The simulation results showed that the prediction accuracy of the GA-BP model was better than that of the BPNN alone. The established model can accurately predict the location of the water jet, making the prediction results more useful for firefighters. [ABSTRACT FROM AUTHOR]

Open source software has been widely used in various industries due to its openness and flexibility, but it also brings potential security problems. Therefore, security analysis is required before using open source software. The current mainstream open source software vulnerability analysis technology is based on source code, and there are problems such as false positives, false negatives and restatements. In order to solve the problems, based on the further study of behavior feature extraction and vulnerability detection technology, a method of using dynamic behavior features to detect open source software vulnerabilities is proposed. Firstly, the relationship between open source software vulnerability and API call sequence is studied. Then, the behavioral risk vulnerability database of open source software is proposed as a support for vulnerability detection. In addition, the CNN-IndRNN classification model is constructed by improving the Independently Recurrent Neural Net-work (IndRNN) algorithm and applies to open source software security vulnerability detection. The experimental results verify the effectiveness of the proposed open source software security vulnerability detection method based on dynamic behavior features. [ABSTRACT FROM AUTHOR]

Several studies have shown that the performance of a supply chain is heavily influenced by the pattern of relationships among firms. This paper analyzes the structure of relationships (network topology) that leads to the highest agility of a food supply chain when sudden demand changes occur. To do this, a simulation model that represents a supply chain and specific rules to allocate orders is built. The supply chain in the model follows the specific characteristics of trade in the primary sector. The model is fitted to the conditions of a real seafood supply chain in Mexico. Agility is measured through the effect on the order fulfillment of a sudden demand shock and the recovery time of this rate to previous values. The simulation results show that the most suitable structure depends on how product is distributed among suppliers. If product is evenly shared, supply chains with homogeneous topologies are more agile than supply chains with heterogeneous topologies, but the result is the opposite if product is unevenly shared among suppliers. Other previous recommendations, such as having multiple suppliers and horizontal links, are confirmed by the simulations. These findings contribute to the general debate on which is the optimal topology for an agile supply chain. [ABSTRACT FROM AUTHOR]

To solve the problem of the deadline-constrained task scheduling in the cloud computing system, this paper proposes a deadline-constrained scheduling algorithm for cloud computing based on the driver of dynamic essential path (Deadline-DDEP). According to the changes of the dynamic essential path of each task node in the scheduling process, the dynamic sub-deadline strategy is proposed. The strategy assigns different sub-deadline values to every task node to meet the constraint relations among task nodes and the user’s defined deadline. The strategy fully considers the dynamic sub-deadline affected by the dynamic essential path of task node in the scheduling process. The paper proposed the quality assessment of optimization cost strategy to solve the problem of selecting server for each task node. Based on the sub-deadline urgency and the relative execution cost in the scheduling process, the strategy selects the server that not only meets the sub-deadline but also obtains much lower execution cost. In this way, the proposed algorithm will make the task graph complete within its deadline, and minimize its total execution cost. Finally, we demonstrate the proposed algorithm via the simulation experiments using Matlab tools. The experimental results show that, the proposed algorithm produces remarkable performance improvement rate on the total execution cost that ranges between 10.3% and 30.8% under meeting the deadline constraint. In view of the experimental results, the proposed algorithm provides better-quality scheduling solution that is suitable for scientific application task execution in the cloud computing environment than IC-PCP, DCCP and CD-PCP. [ABSTRACT FROM AUTHOR]

This paper presents a method to reduce a set of n 2D points to a smaller set of s 2D points with the property that the convex hull on the smaller set is the same as the convex hull of the original bigger set. The paper shows, experimentally, that such reduction accelerates computations; the time it takes to reduce from n down to s points plus the time of computing the convex hull on the s points is less than the time to compute the convex hull on the original set of n points. The method accepts 2D points expressed as real numbers and thus extends our previous method that required points as integers. The method achieves a percentage of reduction of points of over 90% in a collections of four datasets. This amount of reduction provides speedup factors of at least two for various common convex hull algorithms. Theoretically, the reduction method executes in time within O(n) and thus is suitable for preprocessing 2D data before computing the convex hull by any known algorithm. [ABSTRACT FROM AUTHOR]

Wang et al. proposed a method for obtaining elliptic curves with embedding degree 1 for securing critical infrastructures, and presented several elliptic curves generated by their method with torsion points of 160 bits and 189 bits orders. They also presented some experimental results and claimed that their implementation of an elliptic curve generated with their method is faster than an implementation for embedded devices presented by Bertoni et al. In this paper, we point out that the security and efficiency claims given by Wang et al. are flawed. Specifically, we show that it is possible to solve finite field discrete logarithm problems defined over their elliptic curves in practice. On the elliptic curves with torsion points of 160 bits orders generated by Wang et al., their instances of finite field discrete logarithm problems are solved in around 4 hours by using a standard desktop PC. On the torsion points of 189 bits orders, their instances are solved in around 10 days by using two standard desktop PCs. The hardness of the finite field discrete logarithm problems is one of the most important bases of security; therefore, their elliptic curves should not be used for cryptographic purposes. [ABSTRACT FROM AUTHOR]

In the Bayesian Reinforcement Learning (BRL) setting, agents try to maximise the collected rewards while interacting with their environment while using some prior knowledge that is accessed beforehand. Many BRL algorithms have already been proposed, but the benchmarks used to compare them are only relevant for specific cases. The paper addresses this problem, and provides a new BRL comparison methodology along with the corresponding open source library. In this methodology, a comparison criterion that measures the performance of algorithms on large sets of Markov Decision Processes (MDPs) drawn from some probability distributions is defined. In order to enable the comparison of non-anytime algorithms, our methodology also includes a detailed analysis of the computation time requirement of each algorithm. Our library is released with all source code and documentation: it includes three test problems, each of which has two different prior distributions, and seven state-of-the-art RL algorithms. Finally, our library is illustrated by comparing all the available algorithms and the results are discussed. [ABSTRACT FROM AUTHOR]

Ensembles are a well established machine learning paradigm, leading to accurate and robust models, predominantly applied to predictive modeling tasks. Ensemble models comprise a finite set of diverse predictive models whose combined output is expected to yield an improved predictive performance as compared to an individual model. In this paper, we propose a new method for learning ensembles of process-based models of dynamic systems. The process-based modeling paradigm employs domain-specific knowledge to automatically learn models of dynamic systems from time-series observational data. Previous work has shown that ensembles based on sampling observational data (i.e., bagging and boosting), significantly improve predictive performance of process-based models. However, this improvement comes at the cost of a substantial increase of the computational time needed for learning. To address this problem, the paper proposes a method that aims at efficiently learning ensembles of process-based models, while maintaining their accurate long-term predictive performance. This is achieved by constructing ensembles with sampling domain-specific knowledge instead of sampling data. We apply the proposed method to and evaluate its performance on a set of problems of automated predictive modeling in three lake ecosystems using a library of process-based knowledge for modeling population dynamics. The experimental results identify the optimal design decisions regarding the learning algorithm. The results also show that the proposed ensembles yield significantly more accurate predictions of population dynamics as compared to individual process-based models. Finally, while their predictive performance is comparable to the one of ensembles obtained with the state-of-the-art methods of bagging and boosting, they are substantially more efficient. [ABSTRACT FROM AUTHOR]

For high-dimensional and massive data sets, traditional centralized gene expression programming (GEP) or improved algorithms lead to increased run-time and decreased prediction accuracy. To solve this problem, this paper proposes a new improved algorithm called distributed function mining for gene expression programming based on fast reduction (DFMGEP-FR). In DFMGEP-FR, fast attribution reduction in binary search algorithms (FAR-BSA) is proposed to quickly find the optimal attribution set, and the function consistency replacement algorithm is given to solve integration of the local function model. Thorough comparative experiments for DFMGEP-FR, centralized GEP and the parallel gene expression programming algorithm based on simulated annealing (parallel GEPSA) are included in this paper. For the waveform, mushroom, connect-4 and musk datasets, the comparative results show that the average time-consumption of DFMGEP-FR drops by 89.09%%, 88.85%, 85.79% and 93.06%, respectively, in contrast to centralized GEP and by 12.5%, 8.42%, 9.62% and 13.75%, respectively, compared with parallel GEPSA. Six well-studied UCI test data sets demonstrate the efficiency and capability of our proposed DFMGEP-FR algorithm for distributed function mining. [ABSTRACT FROM AUTHOR]

Analyzing and predicting the trend of price fluctuation has been receiving more and more attention, as price risk has become the focus of risk control research in heating oil futures market. A novel time series prediction model combined with the complex network method is put forward in the paper. First of all, this paper counts the cumulative time interval of different nodes in the network, and fits its growth trend with the Fourier model. Then a novel price fluctuation prediction model is established based on the effective information such as some topology properties extracted from the network. The results show that the Fourier model can predict the emergence time of new nodes in the next stage, and the established price fluctuation prediction model can infer the names of nodes in the prediction interval, so as to determine the forward-looking behavior of price evolution. Besides, liken to the NAR neural network, the prediction results obtained by the proposed method also show superiority, which has important theoretical value and academic significance for early warning and prediction of price behavior in the heating oil futures market. [ABSTRACT FROM AUTHOR]

Since 1997 a considerable effort has been spent on the study of the swap (switch) Markov chains on graphic degree sequences. All of these results assume some kind of regularity in the corresponding degree sequences. Recently, Greenhill and Sfragara published a breakthrough paper about irregular normal and directed degree sequences for which rapid mixing of the swap Markov chain is proved. In this paper we present two groups of results. An example from the first group is the following theorem: let be a directed degree sequence on n vertices. Denote by Δ the maximum value among all in- and out-degrees and denote by the number of edges in the realization. Assume furthermore that . Then the swap Markov chain on the realizations of is rapidly mixing. This result is a slight improvement on one of the results of Greenhill and Sfragara. An example from the second group is the following: let d be a bipartite degree sequence on the vertex set U ⊎ V, and let 0 < c1 ≤ c2 < |U| and 0 < d1 ≤ d2 < |V| be integers, where c1 ≤ d(v) ≤ c2: ∀v ∈ V and d1 ≤ d(u) ≤ d2: ∀u ∈ U. Furthermore assume that (c2 − c1 − 1)(d2 − d1 − 1) < max{c1(|V| − d2), d1(|U| − c2)}. Then the swap Markov chain on the realizations of d is rapidly mixing. A straightforward application of this latter result shows that when a random bipartite or directed graph is generated under the Erdős—Rényi G(n, p) model with mild assumptions on n and p then the degree sequence of the generated graph has, with high probability, a rapidly mixing swap Markov chain on its realizations. [ABSTRACT FROM AUTHOR]

Outlier removal is a fundamental data processing task to ensure the quality of scanned point cloud data (PCD), which is becoming increasing important in industrial applications and reverse engineering. Acquired scanned PCD is usually noisy, sparse and temporarily incoherent. Thus the processing of scanned data is typically an ill-posed problem. In the paper, we present a simple and effective method based on two geometrical characteristics constraints to trim the noisy points. One of the geometrical characteristics is the local density information and another is the deviation from the local fitting plane. The local density based method provides a preprocessing step, which could remove those sparse outlier and isolated outlier. The non-isolated outlier removal in this paper depends on a local projection method, which placing those points onto objects. There is no doubt that the deviation of any point from the local fitting plane should be a criterion to reduce the noisy points. The experimental results demonstrate the ability to remove the noisy point from various man-made objects consisting of complex outlier. [ABSTRACT FROM AUTHOR]

With the convergence of various broadcasting systems, the amount of content available in mobile terminals including IPTV has significantly increased. In this paper, we propose a system that enables users to schedule programs considering both section video clips and full video clips based on the user detection method with similar preference. And, since the system constituting the contents can be classified according to the program, the proposed method can store a program desired by the user, and thus create and schedule a kind of individual channel. Experimental results show that the proposed method has a higher prediction accuracy; this is accomplished by comparing existing channel recommendation methods with the program recommendation methods proposed in this paper. [ABSTRACT FROM AUTHOR]

Analyzing geological drilling hole images acquired by Axial View Panoramic Borehole Televiewer (APBT) is a key step to explore the geological structure in a geological exploration. Conventionally, the borehole images are examined by technicians, which is inefficient and subjective. In this paper, three dominant types of borehole-wall images on coal-rock mass structure, namely, border images, fracture images and intact rock mass images are mainly studied. The traditional image classification methods based on unified feature extraction algorithm and single classifier is not effect for the borehole images. Therefore, this paper proposes a novel two-stage classification approach to improve the classification performance of borehole images. In the first-stage classification, the border images are identified from three kinds of images based on texture features and gray-scale histograms features. For the remaining two types of images, in the second-stage classification, Gabor filter is first applied to segment the region of interest (ROI) (such as microfracture, absciss layer and horizontal cracks, etc.) and the central interference region. Then, using the same feature vector after eliminating the central interference region, fracture images are separated from intact rock mass images. We test our two-stage classification system with real borehole images. The results of experimental show that the two-stage classification method can effectively classify three major borehole-wall images with the correction rate of 95.55% in the first stage and 95% in the second stage. [ABSTRACT FROM AUTHOR]

The integrity of image content is essential, although most watermarking algorithms can achieve image authentication but not automatically repair damaged areas or restore the original image. In this paper, a self-recovery reversible image watermarking algorithm is proposed to recover the tampered areas effectively. First of all, the original image is divided into homogeneous blocks and non-homogeneous blocks through multi-scale decomposition, and the feature information of each block is calculated as the recovery watermark. Then, the original image is divided into 4×4 non-overlapping blocks classified into smooth blocks and texture blocks according to image textures. Finally, the recovery watermark generated by homogeneous blocks and error-correcting codes is embedded into the corresponding smooth block by mapping; watermark information generated by non-homogeneous blocks and error-correcting codes is embedded into the corresponding non-embedded smooth block and the texture block via mapping. The correlation attack is detected by invariant moments when the watermarked image is attacked. To determine whether a sub-block has been tampered with, its feature is calculated and the recovery watermark is extracted from the corresponding block. If the image has been tampered with, it can be recovered. The experimental results show that the proposed algorithm can effectively recover the tampered areas with high accuracy and high quality. The algorithm is characterized by sound visual quality and excellent image restoration. [ABSTRACT FROM AUTHOR]

Recommender systems are vulnerable to shilling attacks. Forged user-generated content data, such as user ratings and reviews, are used by attackers to manipulate recommendation rankings. Shilling attack detection in recommender systems is of great significance to maintain the fairness and sustainability of recommender systems. The current studies have problems in terms of the poor universality of algorithms, difficulty in selection of user profile attributes, and lack of an optimization mechanism. In this paper, a shilling behaviour detection structure based on abnormal group user findings and rating time series analysis is proposed. This paper adds to the current understanding in the field by studying the credibility evaluation model in-depth based on the rating prediction model to derive proximity-based predictions. A method for detecting suspicious ratings based on suspicious time windows and target item analysis is proposed. Suspicious rating time segments are determined by constructing a time series, and data streams of the rating items are examined and suspicious rating segments are checked. To analyse features of shilling attacks by a group user’s credibility, an abnormal group user discovery method based on time series and time window is proposed. Standard testing datasets are used to verify the effect of the proposed method. [ABSTRACT FROM AUTHOR]

Combining a deep neural network with fuzzy theory, this paper proposes an advertising click-through rate (CTR) prediction approach based on a fuzzy deep neural network (FDNN). In this approach, fuzzy Gaussian-Bernoulli restricted Boltzmann machine (FGBRBM) is first applied to input raw data from advertising datasets. Next, fuzzy restricted Boltzmann machine (FRBM) is used to construct the fuzzy deep belief network (FDBN) with the unsupervised method layer by layer. Finally, fuzzy logistic regression (FLR) is utilized for modeling the CTR. The experimental results show that the proposed FDNN model outperforms several baseline models in terms of both data representation capability and robustness in advertising click log datasets with noise. [ABSTRACT FROM AUTHOR]

Many important applications continuously generate data, such as financial transaction administration, satellite monitoring, network flow monitoring, and web information processing. The data mining results are always evolving with the newly generated data. Obviously, for the clustering task, it is better to incrementally update the new clustering results based on the old data rather than to recluster all of the data from scratch. The incremental clustering approach is an essential way to solve the problem of clustering with growing Big Data. This paper proposes a boundary-profile-based incremental clustering (BPIC) method to find arbitrarily shaped clusters with dynamically growing datasets. This method represents the existing clustering results with a collection of boundary profiles and discards the inner points of clusters rather than keep all data. It greatly saves both time and space storage costs. To identify the boundary profile, this paper presents a boundary-vector-based boundary point detection (BV-BPD) algorithm that summarizes the structure of the existing clusters. The BPIC method processes each new point in an online fashion and updates the clustering results in a batch mode. When a new point arrives, the BPIC method either immediately labels it or temporarily puts it into a bucket according to the relationship between the new data and the boundary profiles. A bucket is employed to distinguish the noise from the potential seeds of new clusters and alleviate the effects of data order. When the bucket is full, the BPIC method will cluster the data within it and update the clustering results. Thus, the BPIC method is insensitive to noise and the order of new data, which is critical for the robustness of the incremental clustering process. In the experiments, the performance of the boundary point detection algorithm BV-BPD is compared with the state-of-the-art method. The results show that the BV-BPD is better than the state-of-the-art method. Additionally, the performance of BPIC and other two incremental clustering methods are investigated in terms of clustering quality, time and space efficiency. The experimental results indicate that the BPIC method is able to get a qualified clustering result on a large dataset with higher time and space efficiency. [ABSTRACT FROM AUTHOR]

In political campaigns, perceived candidate credibility influences the persuasiveness of messages. In campaigns aiming to influence people’s beliefs, micro-targeted campaigns (MTCs) that target specific voters using their psychological profile have become increasingly prevalent. It remains open how effective MTCs are, notably in comparison to population-targeted campaign strategies. Using an agent-based model, the paper applies recent insights from cognitive models of persuasion, extending them to the societal level in a novel framework for exploring political campaigning. The paper provides an initial treatment of the complex dynamics of population level political campaigning in a psychologically informed manner. Model simulations show that MTCs can take advantage of the psychology of the electorate by targeting voters favourable disposed towards the candidate. Relative to broad campaigning, MTCs allow for efficient and adaptive management of complex campaigns. Findings show that disliked MTC candidates can beat liked population-targeting candidates, pointing to societal questions concerning campaign regulations. [ABSTRACT FROM AUTHOR]

Machine Learning (ML) methods have been proposed in the academic literature as alternatives to statistical ones for time series forecasting. Yet, scant evidence is available about their relative performance in terms of accuracy and computational requirements. The purpose of this paper is to evaluate such performance across multiple forecasting horizons using a large subset of 1045 monthly time series used in the M3 Competition. After comparing the post-sample accuracy of popular ML methods with that of eight traditional statistical ones, we found that the former are dominated across both accuracy measures used and for all forecasting horizons examined. Moreover, we observed that their computational requirements are considerably greater than those of statistical methods. The paper discusses the results, explains why the accuracy of ML models is below that of statistical ones and proposes some possible ways forward. The empirical results found in our research stress the need for objective and unbiased ways to test the performance of forecasting methods that can be achieved through sizable and open competitions allowing meaningful comparisons and definite conclusions. [ABSTRACT FROM AUTHOR]

This paper addresses patient-reported outcomes (PROs) and telemonitoring in congestive heart failure (CHF), both increasingly important topics. The interest in CHF trials is shifting from hard end-points such as hospitalization and mortality, to softer end-points such health-related quality of life. However, the relation of these softer end-points to objective parameters is not well studied. Telemonitoring is suitable for collecting both patient-reported outcomes and objective parameters. Most telemonitoring studies, however, do not take full advantage of the available sensor technology and intelligent data analysis. The Chiron clinical observational study was performed among 24 CHF patients (17 men and 7 women, age 62.9 ± 9.4 years, 15 NYHA class II and 9 class III, 10 of ishaemic, aetiology, 6 dilated, 2 valvular, and 6 of multiple aetiologies or cardiomyopathy) in Italy and UK. A large number of physiological and ambient parameters were collected by wearable and other devices, together with PROs describing how well the patients felt, over 1,086 days of observation. The resulting data were mined for relations between the objective parameters and the PROs. The objective parameters (humidity, ambient temperature, blood pressure, SpO2, and sweeting intensity) could predict the PROs with accuracies up to 86% and AUC up to 0.83, making this the first report providing evidence for ambient and physiological parameters to be objectively related to PROs in CHF patients. We also analyzed the relations in the predictive models, gaining some insights into what affects the feeling of health, which was also generally not attempted in previous investigations. The paper strongly points to the possibility of using PROs as primary end-points in future trials. [ABSTRACT FROM AUTHOR]

In this paper, we propose a hybrid method to forecast the stock prices called High-order-fuzzy-fluctuation-Trends-based Back Propagation(HTBP)Neural Network model. First, we compare each value of the historical training data with the previous day's value to obtain a fluctuation trend time series (FTTS). On this basis, the FTTS blur into fuzzy time series (FFTS) based on the fluctuation of the increasing, equality, decreasing amplitude and direction. Since the relationship between FFTS and future wave trends is nonlinear, the HTBP neural network algorithm is used to find the mapping rules in the form of self-learning. Finally, the results of the algorithm output are used to predict future fluctuations. The proposed model provides some innovative features:(1)It combines fuzzy set theory and neural network algorithm to avoid overfitting problems existed in traditional models. (2)BP neural network algorithm can intelligently explore the internal rules of the actual existence of sequential data, without the need to analyze the influence factors of specific rules and the path of action. (3)The hybrid modal can reasonably remove noises from the internal rules by proper fuzzy treatment. This paper takes the TAIEX data set of Taiwan stock exchange as an example, and compares and analyzes the prediction performance of the model. The experimental results show that this method can predict the stock market in a very simple way. At the same time, we use this method to predict the Shanghai stock exchange composite index, and further verify the effectiveness and universality of the method. [ABSTRACT FROM AUTHOR]

The dispatching of hydro-thermal system is a nonlinear programming problem with multiple constraints and high dimensions and the solution techniques of the model have been a hotspot in research. Based on the advantage of that the artificial bee colony algorithm (ABC) can efficiently solve the high-dimensional problem, an improved artificial bee colony algorithm has been proposed to solve DHTS problem in this paper. The improvements of the proposed algorithm include two aspects. On one hand, local search can be guided in efficiency by the information of the global optimal solution and its gradient in each generation. The global optimal solution improves the search efficiency of the algorithm but loses diversity, while the gradient can weaken the loss of diversity caused by the global optimal solution. On the other hand, inspired by genetic algorithm, the nectar resource which has not been updated in limit generation is transformed to a new one by using selection, crossover and mutation, which can ensure individual diversity and make full use of prior information for improving the global search ability of the algorithm. The two improvements of ABC algorithm are proved to be effective via a classical numeral example at last. Among which the genetic operator for the promotion of the ABC algorithm’s performance is significant. The results are also compared with those of other state-of-the-art algorithms, the enhanced ABC algorithm has general advantages in minimum cost, average cost and maximum cost which shows its usability and effectiveness. The achievements in this paper provide a new method for solving the DHTS problems, and also offer a novel reference for the improvement of mechanism and the application of algorithms. [ABSTRACT FROM AUTHOR]

In developing nations, many expanding cities are facing challenges that result from the overwhelming numbers of people and vehicles. Collecting real-time, reliable and precise traffic flow information is crucial for urban traffic management. The main purpose of this paper is to develop an adaptive model that can assess the real-time vehicle counts on urban roads using computer vision technologies. This paper proposes an automatic real-time background update algorithm for vehicle detection and an adaptive pattern for vehicle counting based on the virtual loop and detection line methods. In addition, a new robust detection method is introduced to monitor the real-time traffic congestion state of road section. A prototype system has been developed and installed on an urban road for testing. The results show that the system is robust, with a real-time counting accuracy exceeding 99% in most field scenarios. [ABSTRACT FROM AUTHOR]

This paper aims to optimize a desirable fare structure for the public transit service along a bus-subway corridor with the consideration of those factors related to equity in trip, including travel distance and comfort level. The travel distance factor is represented by the distance-based fare strategy, which is an existing differential strategy. The comfort level one is considered in the area-based fare strategy which is a new differential strategy defined in this paper. Both factors are referred to by the combined fare strategy which is composed of distance-based and area-based fare strategies. The flat fare strategy is applied to determine a reference level of social welfare and obtain the general passenger flow along transit lines, which is used to divide areas or zones along the corridor. This problem is formulated as a bi-level program, of which the upper level maximizes the social welfare and the lower level capturing traveler choice behavior is a variable-demand stochastic user equilibrium assignment model. A genetic algorithm is applied to solve the bi-level program while the method of successive averages is adopted to solve the lower-level model. A series of numerical experiments are carried out to illustrate the performance of the models and solution methods. Numerical results indicate that all three differential fare strategies play a better role in enhancing the social welfare than the flat fare strategy and that the fare structure under the combined fare strategy generates the highest social welfare and the largest resulting passenger demand, which implies that the more equity factors a differential fare strategy involves the more desirable fare structure the strategy has. [ABSTRACT FROM AUTHOR]

This paper presents a method for formation flight and collision avoidance of multiple UAVs. Due to the shortcomings such as collision avoidance caused by UAV’s high-speed and unstructured environments, this paper proposes a modified tentacle algorithm to ensure the high performance of collision avoidance. Different from the conventional tentacle algorithm which uses inverse derivation, the modified tentacle algorithm rapidly matches the radius of each tentacle and the steering command, ensuring that the data calculation problem in the conventional tentacle algorithm is solved. Meanwhile, both the speed sets and tentacles in one speed set are reduced and reconstructed so as to be applied to multiple UAVs. Instead of path iterative optimization, the paper selects the best tentacle to obtain the UAV collision avoidance path quickly. The simulation results show that the method presented in the paper effectively enhances the performance of flight formation and collision avoidance for multiple high-speed UAVs in unstructured environments. [ABSTRACT FROM AUTHOR]

With the development of computer network bandwidth, packet classification algorithms which are able to deal with large-scale rule sets are in urgent need. Among the existing algorithms, researches on packet classification algorithms based on hierarchical trie have become an important packet classification research branch because of their widely practical use. Although hierarchical trie is beneficial to save large storage space, it has several shortcomings such as the existence of backtracking and empty nodes. This paper proposes a new packet classification algorithm, Hierarchical Trie Algorithm Based on Expectation-Maximization Clustering (HTEMC). Firstly, this paper uses the formalization method to deal with the packet classification problem by means of mapping the rules and data packets into a two-dimensional space. Secondly, this paper uses expectation-maximization algorithm to cluster the rules based on their aggregate characteristics, and thereby diversified clusters are formed. Thirdly, this paper proposes a hierarchical trie based on the results of expectation-maximization clustering. Finally, this paper respectively conducts simulation experiments and real-environment experiments to compare the performances of our algorithm with other typical algorithms, and analyzes the results of the experiments. The hierarchical trie structure in our algorithm not only adopts trie path compression to eliminate backtracking, but also solves the problem of low efficiency of trie updates, which greatly improves the performance of the algorithm. [ABSTRACT FROM AUTHOR]

Community detection is an important tasks across a number of research fields including social science, biology, and physics. In the real world, topology information alone is often inadequate to accurately find out community structure due to its sparsity and noise. The potential useful prior information such as pairwise constraints which contain must-link and cannot-link constraints can be obtained from domain knowledge in many applications. Thus, combining network topology with prior information to improve the community detection accuracy is promising. Previous methods mainly utilize the must-link constraints while cannot make full use of cannot-link constraints. In this paper, we propose a semi-supervised community detection framework which can effectively incorporate two types of pairwise constraints into the detection process. Particularly, must-link and cannot-link constraints are represented as positive and negative links, and we encode them by adding different graph regularization terms to penalize closeness of the nodes. Experiments on multiple real-world datasets show that the proposed framework significantly improves the accuracy of community detection. [ABSTRACT FROM AUTHOR]

B-spline functions are widely used in many industrial applications such as computer graphic representations, computer aided design, computer aided manufacturing, computer numerical control, etc. Recently, there exist some demands, e.g. in reverse engineering (RE) area, to employ B-spline curves for non-trivial cases that include curves with discontinuous points, cusps or turning points from the sampled data. The most challenging task in these cases is in the identification of the number of knots and their respective locations in non-uniform space in the most efficient computational cost. This paper presents a new strategy for fitting any forms of curve by B-spline functions via local algorithm. A new two-step method for fast knot calculation is proposed. In the first step, the data is split using a bisecting method with predetermined allowable error to obtain coarse knots. Secondly, the knots are optimized, for both locations and continuity levels, by employing a non-linear least squares technique. The B-spline function is, therefore, obtained by solving the ordinary least squares problem. The performance of the proposed method is validated by using various numerical experimental data, with and without simulated noise, which were generated by a B-spline function and deterministic parametric functions. This paper also discusses the benchmarking of the proposed method to the existing methods in literature. The proposed method is shown to be able to reconstruct B-spline functions from sampled data within acceptable tolerance. It is also shown that, the proposed method can be applied for fitting any types of curves ranging from smooth ones to discontinuous ones. In addition, the method does not require excessive computational cost, which allows it to be used in automatic reverse engineering applications. [ABSTRACT FROM AUTHOR]

ICD-10(International Classification of Diseases 10th revision) is a classification of a disease, symptom, procedure, or injury. Diseases are often described in patients’ medical records with free texts, such as terms, phrases and paraphrases, which differ significantly from those used in ICD-10 classification. This paper presents an improved approach based on the Longest Common Subsequence (LCS) and semantic similarity for automatic Chinese diagnoses, mapping from the disease names given by clinician to the disease names in ICD-10. LCS refers to the longest string that is a subsequence of every member of a given set of strings. The proposed method of improved LCS in this paper can increase the accuracy of processing in Chinese disease mapping. [ABSTRACT FROM AUTHOR]

Multi-robot task allocation is one of the main problems to address in order to design a multi-robot system, very especially when robots form coalitions that must carry out tasks before a deadline. A lot of factors affect the performance of these systems and among them, this paper is focused on the physical interference effect, produced when two or more robots want to access the same point simultaneously. To our best knowledge, this paper presents the first formal description of multi-robot task allocation that includes a model of interference. Thanks to this description, the complexity of the allocation problem is analyzed. Moreover, the main contribution of this paper is to provide the conditions under which the optimal solution of the aforementioned allocation problem can be obtained solving an integer linear problem. The optimal results are compared to previous allocation algorithms already proposed by the first two authors of this paper and with a new method proposed in this paper. The results obtained show how the new task allocation algorithms reach up more than an 80% of the median of the optimal solution, outperforming previous auction algorithms with a huge reduction of the execution time. [ABSTRACT FROM AUTHOR]

The interaction between phenotypic plasticity, e.g. learning, and evolution is an important topic both in Evolutionary Biology and Machine Learning. The evolution of learning is commonly studied in Evolutionary Biology, while the use of an evolutionary process to improve learning is of interest to the field of Machine Learning. This paper takes a different point of view by studying the effect of learning on the evolutionary process, the so-called Baldwin effect. A well-studied result in the literature about the Baldwin effect is that learning affects the speed of convergence of the evolutionary process towards some genetic configuration, which corresponds to the environment-induced plastic response. This paper demonstrates that learning can change the outcome of evolution, i.e., lead to a genetic configuration that does not correspond to the plastic response. Results are obtained both analytically and experimentally by means of an agent-based model of a foraging task, in an environment where the distribution of resources follows seasonal cycles and the foraging success on different resource types is conditioned by trade-offs that can be evolved and learned. This paper attempts to answer a question that has been overlooked: whether learning has an effect on what genotypic traits are evolved, i.e. the selection of a trait that enables a plastic response changes the selection pressure on a different trait, in what could be described as co-evolution between different traits in the same genome. [ABSTRACT FROM AUTHOR]

Several lifetime distributions have played an important role to fit survival data. However, for some of these models, the computation of maximum likelihood estimators is quite difficult due to presence of flat regions in the search space, among other factors. Several well-known derivative-based optimization tools are unsuitable for obtaining such estimates. To circumvent this problem, we introduce the AdequacyModel computational library version 2.0.0 for the R statistical environment with two major contributions: a general optimization technique based on the Particle Swarm Optimization (PSO) method (with a minor modification of the original algorithm) and a set of statistical measures for assessment of the adequacy of the fitted model. This library is very useful for researchers in probability and statistics and has been cited in various papers in these areas. It serves as the basis for the Newdistns library (version 2.1) published in an impact journal in the area of computational statistics, see . It is also the basis of the Wrapped library (version 2.0), see . A third package making use of the AdequacyModel library can be found in . In addition, the proposed library has proved to be very useful for maximizing log-likelihood functions with complex search regions. The library provides a greater control of the optimization process by introducing a stop criterion based on a minimum number of iterations and the variance of a given proportion of optimal values. We emphasize that the new library can be used not only in statistics but in physics and mathematics as proved in several examples throughout the paper. [ABSTRACT FROM AUTHOR]

The user interaction in online social networks can not only reveal the social relationships among users in e-commerce systems, but also imply the social preferences of a target user for recommendation services. However, the current research has rarely explored the impact of social interaction on recommendation performance, especially now that recommender systems face increasing challenges and suffer from poor efficiency due to social data overload. Therefore, applied research on user interaction has become increasingly necessary in the field of social recommendation. In this paper, we develop a novel social recommendation method based on the user interaction in complex social networks, called the SRUI model, to present a basis for improving the efficiency of the recommender systems. Specifically, a weighted social interaction network is first mapped to represent the interactions among social users according to the gathered information about historical user behavior. Thereafter, the complete path set is mined by the complete path mining (CPM) algorithm to find social similar neighbors with tastes similar to those of the target user. Finally, the social similar tendencies of the users on the complete paths are obtained to predict the final ratings of items through the SRUI model. A series of experimental results based on two real public datasets show that our approach performs better than other state-of-the-art methods in terms of recommendation performance. [ABSTRACT FROM AUTHOR]

Unless the targeted mesh is developable, metric distortion is inevitable during the process of surface mesh parameterization, thus one important objective of all involved parametric studies is to reduce the metric distortion. In order to further reduce area and angle distortion, a novel method of boundary-free mesh parameterization is presented in the paper. Firstly, the initial boundary-fixed conformal parameterization from 3D surface mesh patch to a plane is performed in the method. Then, based on the initial parameterization, the iterations of boundary-free quasi-harmonic parameterization are developed, where the tensor field is updated in each iterative step and the principal curvature direction is utilized to terminate the iteration. The solution of the novel method is convenient to calculate since it involves a series of linear systems. In our novel parameterization method, lower metric distortion and considerable efficiency have been obtained in experiments. [ABSTRACT FROM AUTHOR]