Search

University scientific research ability is an important indicator to express the strength of universities. In this paper, the evaluation of university scientific research ability is investigated based on the output of sci-tech papers. Four university alliances from North America, UK, Australia, and China, are selected as the case study of the university scientific research evaluation. Data coming from Thomson Reuters InCites are collected to support the evaluation. The work has contributed new framework to the issue of university scientific research ability evaluation. At first, we have established a hierarchical structure to show the factors that impact the evaluation of university scientific research ability. Then, a new MCDM method called D-AHP model is used to implement the evaluation and ranking of different university alliances, in which a data-driven approach is proposed to automatically generate the D numbers preference relations. Next, a sensitivity analysis has been given to show the impact of weights of factors and sub-factors on the evaluation result. At last, the results obtained by using different methods are compared and discussed to verify the effectiveness and reasonability of this study, and some suggestions are given to promote China’s scientific research ability. [ABSTRACT FROM AUTHOR]

Past research on the process of extinguishing a fire typically used a traditional linear water jet falling point model and the results ignored external factors, such as environmental conditions and the status of the fire engine, even though the water jet falling point location prediction was often associated with these parameters and showed a nonlinear relationship. This paper constructed a BP (Back Propagation) neural network model. The fire gun nozzle characteristics were included as model inputs, and the water discharge point coordinates were the model outputs; thus, the model could precisely predict the water discharge point with small error and high precision to determine an accurate firing position and allow for the timely adjustment of the spray gun. To improve the slow convergence and local optimality problems of the BP neural network (BPNN), this paper further used a genetic algorithm to optimize the BPNN (GA-BPNN). The BPNN can be used to optimize the weights in the network to train them for global optimization. A genetic algorithm was introduced into the neural network approach, and the water jet landing prediction model was further improved. The simulation results showed that the prediction accuracy of the GA-BP model was better than that of the BPNN alone. The established model can accurately predict the location of the water jet, making the prediction results more useful for firefighters. [ABSTRACT FROM AUTHOR]

This paper aims to demonstrate the impact of coal enterprises’ vertical integration on the performance of innovation corporate social responsibility (ICSR) and to elaborate its specific transmission path through financing structure and market power. This paper takes the data of A-share listed coal company from 2008 to 2017 as samples, uses input-output table method to measure the degree of vertical integration, and explores the relationship between the four factors through multiple linear regression and Bootstrap method. We found that: (1) the vertical integration of coal enterprises has positive incentives for the promotion of ICSR. (2) Financing structure and market power play a chain intermediary role in this process of incentive. (3) In areas with high marketization process, vertical integration has more significant incentive effect on ICSR. The paper extends the research on the relationship between vertical integration and innovation, which provides a reference for the improvement of China’s supply-side reform and corporate social responsibility (CSR) fulfillment policy. It is helpful to promote the sustainable development of the coal industry, stimulate the innovation vitality of enterprises, and improve the fulfillment of CSR. [ABSTRACT FROM AUTHOR]

Map-matching technology is a key and difficult technology in the development of vehicle navigation systems. Only by correctly identifying the road segment on which the vehicle is traveling can the navigation system make the right decision. At the same time, the complexity of the road network structure and a variety of error factors have introduced great challenges to map matching and have attracted the attention of many researchers as well. This paper analyzes various map-matching algorithms, determines that the key to the matching performance is the junction matching, performs an in-depth study on the junction-matching problem, and puts forward the junction decision domain model. The model mainly involves information regarding the width of the road segment, the angle between two road segments, the accuracy of GPS and the accuracy of the road network. In this paper, we use this model to improve the map-matching algorithm based on a hidden Markov model (HMM). The experimental results show that the improved matching algorithm can effectively reduce the error rate of junction matching and improve the matching performance of a navigation system. [ABSTRACT FROM AUTHOR]

An extreme learning machine (ELM) is a novel training method for single-hidden layer feedforward neural networks (SLFNs) in which the hidden nodes are randomly assigned and fixed without iterative tuning. ELMs have earned widespread global interest due to their fast learning speed, satisfactory generalization ability and ease of implementation. In this paper, we extend this theory to hypercomplex space and attempt to simultaneously consider multisource information using a hypercomplex representation. To illustrate the performance of the proposed hypercomplex extreme learning machine (HELM), we have applied this scheme to the task of multispectral palmprint recognition. Images from different spectral bands are utilized to construct the hypercomplex space. Extensive experiments conducted on the PolyU and CASIA multispectral databases demonstrate that the HELM scheme can achieve competitive results. The source code together with datasets involved in this paper can be available for free download at . [ABSTRACT FROM AUTHOR]

Computational modeling of engineered gene circuits is an important while challenged task in systems biology. In order to describe and predict the response behaviors of genetic circuits using reliable model parameters, this paper applies an optimal experimental design(OED) method to obtain input signals. In order to obtain informative observations, this study focuses on maximizing Fisher information matrix(FIM)-based optimal criteria and to provide optimal inputs. Furthermore, this paper designs a two-stage optimization with the modified E-optimal criteria and applies harmony search(HS)-based OED algorithm to minimize estimation errors. The proposed optimal identification methodology involves estimation errors and the sample size to pursue a trade-off between estimation accuracy and measurement cost in modeling gene networks. The designed cost function takes two major factors into account, in which experimental costs are proportional to the number of time points. Experiments select two types of synthetic genetic networks to validate the effectiveness of the proposed HS-OED approach. Identification outcomes and analysis indicate the proposed HS-OED method outperforms two candidate OED approaches, with reduced computational effort. [ABSTRACT FROM AUTHOR]

This paper presents a method to reduce a set of n 2D points to a smaller set of s 2D points with the property that the convex hull on the smaller set is the same as the convex hull of the original bigger set. The paper shows, experimentally, that such reduction accelerates computations; the time it takes to reduce from n down to s points plus the time of computing the convex hull on the s points is less than the time to compute the convex hull on the original set of n points. The method accepts 2D points expressed as real numbers and thus extends our previous method that required points as integers. The method achieves a percentage of reduction of points of over 90% in a collections of four datasets. This amount of reduction provides speedup factors of at least two for various common convex hull algorithms. Theoretically, the reduction method executes in time within O(n) and thus is suitable for preprocessing 2D data before computing the convex hull by any known algorithm. [ABSTRACT FROM AUTHOR]

Genetic maps order genetic markers along chromosomes. They are, for instance, extensively used in marker-assisted selection to accelerate breeding programs. Even for the same species, people often have to deal with several alternative maps obtained using different ordering methods or different datasets, e.g. resulting from different segregating populations. Having efficient tools to identify the consistency and discrepancy of alternative maps is thus essential to facilitate genetic map comparisons. We propose to encode genetic maps by bucket order, a kind of order, which takes into account the blurred parts of the marker order while being an efficient data structure to achieve low complexity algorithms. The main result of this paper is an O(n log(n)) procedure to identify the largest agreements between two bucket orders of n elements, their Longest Common Subsequence (LCS), providing an efficient solution to highlight discrepancies between two genetic maps. The LCS of two maps, being the largest set of their collinear markers, is used as a building block to compute pairwise map congruence, to visually emphasize maker collinearity and in some scaffolding methods relying on genetic maps to improve genome assembly. As the LCS computation is a key subroutine of all these genetic map related tools, replacing the current LCS subroutine of those methods by ours –to do the exact same work but faster– could significantly speed up those methods without changing their accuracy. To ease such transition we provide all required algorithmic details in this self contained paper as well as an R package implementing them, named LCSLCIS, which is freely available at: . [ABSTRACT FROM AUTHOR]

In this paper, the accelerated failure time (AFT) model is modified to analyze post-work grocery shopping activity duration. Much previous shopping duration analysis was conducted using the proportional hazard (PH) modeling approach. Once the proportionality assumption was violated, the traditional accelerated failure time (TAFT) model was usually selected as an alternative modeling approach. However, a TAFT model only has covariates with non-proportional and time-dependent effects on the hazard overtime while a PH model only accommodates covariates with proportional and time-independent effects. Neither of them considers the possibility that some of covariates may have proportional and time-independent effects and some may have non-proportional and time-dependent effects on the hazard value in one model. To address this issue, the paper generalizes the TAFT model and develops a modified accelerated failure time (MAFT) model to accommodate both time-dependent and time-independent covariates for activity duration analysis. Checking on the proportionality assumption indicates that the assumption is not valid in the post-work grocery shopping activity data extracted from the 2017 National Household Travel Survey (NHTS) conducted by the U.S. Department of Transportation (USDOT). Both TAFT and MAFT models are developed for comparisons and analysis. The empirical and statistical results show that there do exist two different types of covariates affecting shopping activity duration, including covariates only with proportional and time-independent effects (i.e. working duration, commute travel time) and those with non-proportional and time-dependent effects. The MAFT model can capture the subtleties in various types of covariate effects and help better understand how those covariates affect activity duration overtime. This paper also shows the importance to develop a flexible duration model with both time-dependent and time-independent covariates for accurately evaluating travel demand management (TDM) policies, like flexible work hours. [ABSTRACT FROM AUTHOR]

Diabetic retinopathy (DR) is a disease which is widely diagnosed using (colour fundus) images. Efficiency and accuracy are critical in diagnosing DR as lack of timely intervention can lead to irreversible visual impairment. In this paper, we examine strategies for scrutinizing images which affect diagnostic performance of medical practitioners via an eye-tracking study. A total of 56 subjects with 0 to 18 years of experience participated in the study. Every subject was asked to detect DR from 40 images. The findings indicate that practitioners use mainly two types of strategies characterized by either higher dwell duration or longer track length. The main findings of the study are that higher dwell-based strategy led to higher average accuracy (> 85%) in diagnosis, irrespective of the expertise of practitioner; whereas, the average obtained accuracy with a long-track length-based strategy was dependent on the expertise of the practitioner. In the second part of the paper, we use the experimental findings to recommend a scanning strategy for fast and accurate diagnosis of DR that can be potentially used by image readers. This is derived by combining the eye-tracking gaze maps of medical experts in a novel manner based on a set of rules. This strategy requires scrutiny of images in a manner which is consistent with spatial preferences found in human perception in general and in the domain of fundus images in particular. The Levenshtein distance-based assessment of gaze patterns also establish the effectiveness of the derived scanning pattern and is thus recommended for image readers. [ABSTRACT FROM AUTHOR]

This paper develops a new machine vision framework for efficient detection and classification of manufacturing defects in metal boxes. Previous techniques, which are based on either visual inspection or on hand-crafted features, are both inaccurate and time consuming. In this paper, we show that by using autoencoder deep neural network (DNN) architecture, we are able to not only classify manufacturing defects, but also localize them with high accuracy. Compared to traditional techniques, DNNs are able to learn, in a supervised manner, the visual features that achieve the best performance. Our experiments on a database of real images demonstrate that our approach overcomes the state-of-the-art while remaining computationally competitive. [ABSTRACT FROM AUTHOR]

Particle Swarm Optimization (PSO) is widely used in maximum power point tracking (MPPT) of photovoltaic (PV) energy systems. Nevertheless, this technique suffers from two main problems in the case of partial shading conditions (PSCs). The first problem is that PSO is a time invariant optimization technique that cannot follow the dynamic global peak (GP) under time variant shading patterns (SPs) and sticks to the first GP that occurs at the beginning. This problem can be solved by dispersing the PSO particles using two new techniques introduced in this paper. The two new proposed PSO re-initialization techniques are to disperse the particles upon the SP changes and the other one is upon a predefined time (PDT). The second problem is regarding the high oscillations around steady state, which can be solved by using fuzzy logic controller (FLC) to fine-tune the output power and voltage from the PV system. The new contribution of this paper is the hybrid PSO-FLC with two PSO particles dispersing techniques that is able to solve the two previous mentioned problems effectively and improve the performance of the PV system in both normal and PSCs. A detailed list of comparisons between hybrid PSO-FLC and original PSO using the two proposed methodologies are achieved. The results prove the superior performance of hybrid PSO-FLC compared to PSO in terms of efficiency, accuracy, oscillations reduction around steady state and soft tuning of the GP tracked. [ABSTRACT FROM AUTHOR]

In this paper, a two-stage filter for removing salt-and-pepper noise using noise detector based on characteristic difference parameter and adaptive directional mean filter is proposed. The first stage firstly detects the noise corrupted pixels by combining characteristic difference parameter and gray level extreme, then develops an improved adaptive median filter to firstly restore them. The second stage introduces a restoration scheme to further restore the noise corrupted pixels, which firstly divides them into two types and then applies different restoration skills for the pixels based on the classification result. One type of pixels is restored by the mean filter and the other type of pixels is restored by the proposed adaptive directional mean filter. The new filter firstly adaptively selects the optimal filtering window and direction template, then replaces the gray level of noise corrupted pixel by the mean value of pixels on the optimal template. Experimental results show that the proposed filter outperforms many existing main filters in terms of noise suppression and detail preservation. [ABSTRACT FROM AUTHOR]

Wind and temperature data are important parameters in aircraft performance studies. The lack of accurate measurements of these parameters forces researchers to rely on numerical weather prediction models, which are often filtered for a larger area with decreased local accuracy. Aircraft, however, also transmit information related to weather conditions, in response to interrogation by air traffic controller surveillance radars. Although not intended for this purpose, aircraft surveillance data contains information that can be used for weather models. This paper presents a method that can be used to reconstruct a weather field from surveillance data that can be received with a simple 1090 MHz receiver. Throughout the paper, we answer two main research questions: how to accurately infer wind and temperature from aircraft surveillance data, and how to reconstruct a real-time weather grid efficiently. We consider aircraft as moving sensors that measure wind and temperature conditions indirectly at different locations and flight levels. To address the first question, aircraft barometric altitude, ground velocity, and airspeed are decoded from down-linked surveillance data. Then, temperature and wind observations are computed based on aeronautical speed conversion equations. To address the second question, we propose a novel Meteo-Particle (MP) model for constructing the wind and temperature fields. Short-term local prediction is also possible by employing a predictor layer. Using an unseen observation test dataset, we are able to validate that the mean absolute errors of inferred wind and temperature using MP model are 67% and 26% less than using the interpolated model based on GFS reanalysis data. [ABSTRACT FROM AUTHOR]

The ensemble method random forests has become a popular classification tool in bioinformatics and related fields. The out-of-bag error is an error estimation technique often used to evaluate the accuracy of a random forest and to select appropriate values for tuning parameters, such as the number of candidate predictors that are randomly drawn for a split, referred to as mtry. However, for binary classification problems with metric predictors it has been shown that the out-of-bag error can overestimate the true prediction error depending on the choices of random forests parameters. Based on simulated and real data this paper aims to identify settings for which this overestimation is likely. It is, moreover, questionable whether the out-of-bag error can be used in classification tasks for selecting tuning parameters like mtry, because the overestimation is seen to depend on the parameter mtry. The simulation-based and real-data based studies with metric predictor variables performed in this paper show that the overestimation is largest in balanced settings and in settings with few observations, a large number of predictor variables, small correlations between predictors and weak effects. There was hardly any impact of the overestimation on tuning parameter selection. However, although the prediction performance of random forests was not substantially affected when using the out-of-bag error for tuning parameter selection in the present studies, one cannot be sure that this applies to all future data. For settings with metric predictor variables it is therefore strongly recommended to use stratified subsampling with sampling fractions that are proportional to the class sizes for both tuning parameter selection and error estimation in random forests. This yielded less biased estimates of the true prediction error. In unbalanced settings, in which there is a strong interest in predicting observations from the smaller classes well, sampling the same number of observations from each class is a promising alternative. [ABSTRACT FROM AUTHOR]

This paper investigates the consequences of ignoring the clustered data structure on allometric models. Clustered data, in the form of multiple trees sampled from multiple forest stands is commonly used to develop biomass allometric models. Of 102 reviewed papers published between 2012 and 2016 that reported biomass allometric models, 84 (82%) have used a clustered sampling design. However, in as many as 80% of these, the clustered data structure was ignored, potentially violating the independence assumption in ordinary least squares methods. The consequences of ignoring clustered data structure were empirically validated using two clustered biomass datasets (of 110 and 220 trees, with the cluster size of 5 and 10 trees respectively). We showed that when Intraclass Correlation Coefficient (ICC) was higher than zero, ignoring the clustered data structure returned underestimated standard errors, affecting further the confidence interval and t-test results. The underestimation level depended on ICC (which shows the variance proportion that was caused by the forest stand) and on cluster size (the number of trees sampled from one forest stand). We also showed that using first-order autocorrelation tests, such as the traditional Durbin-Watson statistic, to detect the autocorrelation due to clustered structure could be misleading as the test may show lack of autocorrelation even though ICC is different from zero. In conclusion, when ICC is higher than zero, ignoring the clustered data structure yields over-confident biomass predictions (due to underestimated confidence interval) and/or incorrect research conclusions (due to overestimated evidence against null hypothesis in t-test). Therefore, using a modelling approach that accounts for the hierarchical structure of the data is highly recommended when any form of clustering can be identified, even if the autocorrelation is not significant. [ABSTRACT FROM AUTHOR]

Outlier removal is a fundamental data processing task to ensure the quality of scanned point cloud data (PCD), which is becoming increasing important in industrial applications and reverse engineering. Acquired scanned PCD is usually noisy, sparse and temporarily incoherent. Thus the processing of scanned data is typically an ill-posed problem. In the paper, we present a simple and effective method based on two geometrical characteristics constraints to trim the noisy points. One of the geometrical characteristics is the local density information and another is the deviation from the local fitting plane. The local density based method provides a preprocessing step, which could remove those sparse outlier and isolated outlier. The non-isolated outlier removal in this paper depends on a local projection method, which placing those points onto objects. There is no doubt that the deviation of any point from the local fitting plane should be a criterion to reduce the noisy points. The experimental results demonstrate the ability to remove the noisy point from various man-made objects consisting of complex outlier. [ABSTRACT FROM AUTHOR]

In this paper we compare systematically the most promising neuroevolutionary methods and two new original methods on the double-pole balancing problem with respect to: the ability to discover solutions that are robust to variations of the environment, the speed with which such solutions are found, and the ability to scale-up to more complex versions of the problem. The results indicate that the two original methods introduced in this paper and the Exponential Natural Evolutionary Strategy method largely outperform the other methods with respect to all considered criteria. The results collected in different experimental conditions also reveal the importance of regulating the selective pressure and the importance of exposing evolving agents to variable environmental conditions. The data collected and the results of the comparisons are used to identify the most effective methods and the most promising research directions. [ABSTRACT FROM AUTHOR]

In business replenishment, discount offers of multi-item may either provide different discount schedules with a single discount type, or provide schedules with multiple discount types. The paper investigates the joint effects of multiple discount schemes on the decisions of multi-item joint replenishment. In this paper, a joint replenishment problem (JRP) model, considering three discount (all-unit discount, incremental discount, total volume discount) offers simultaneously, is constructed to determine the basic cycle time and joint replenishment frequencies of multi-item. To solve the proposed problem, a heuristic algorithm is proposed to find the optimal solutions and the corresponding total cost of the JRP model. Numerical experiment is performed to test the algorithm and the computational results of JRPs under different discount combinations show different significance in the replenishment cost reduction. [ABSTRACT FROM AUTHOR]

Several network features and information retrieval methods have been proposed to elucidate the structure of citation networks and to detect important nodes. However, it is difficult to retrieve information related to trends in an academic field and to detect cutting-edge areas from the citation network. In this paper, we propose a novel framework that detects the trend as the growth direction of a citation network using network representation learning(NRL). We presume that the linear growth of citation network in latent space obtained by NRL is the result of the iterative edge additional process of a citation network. On APS datasets and papers of some domains of the Web of Science, we confirm the existence of trends by observing that an academic field grows in a specific direction linearly in latent space. Next, we calculate each node’s degree of trend-following as an indicator called the intrinsic publication year (IPY). As a result, there is a correlation between the indicator and the number of future citations. Furthermore, a word frequently used in the abstracts of cutting-edge papers (high-IPY paper) is likely to be used often in future publications. These results confirm the validity of the detected trend for predicting citation network growth. [ABSTRACT FROM AUTHOR]

This paper presents an integrated hybrid optimization algorithm for training the radial basis function neural network (RBF NN). Training of neural networks is still a challenging exercise in machine learning domain. Traditional training algorithms in general suffer and trap in local optima and lead to premature convergence, which makes them ineffective when applied for datasets with diverse features. Training algorithms based on evolutionary computations are becoming popular due to their robust nature in overcoming the drawbacks of the traditional algorithms. Accordingly, this paper proposes a hybrid training procedure with differential search (DS) algorithm functionally integrated with the particle swarm optimization (PSO). To surmount the local trapping of the search procedure, a new population initialization scheme is proposed using Logistic chaotic sequence, which enhances the population diversity and aid the search capability. To demonstrate the effectiveness of the proposed RBF hybrid training algorithm, experimental analysis on publicly available 7 benchmark datasets are performed. Subsequently, experiments were conducted on a practical application case for wind speed prediction to expound the superiority of the proposed RBF training algorithm in terms of prediction accuracy. [ABSTRACT FROM AUTHOR]

Public transport (PT) is a key element in most major cities around the world. With the development of smartphones, available journey planning information is becoming an integral part of the PT system. Each traveler has specific preferences when undertaking a trip, and these preferences can also be reflected on the smartphone. This paper considers transit assignment in urban public-transport networks in which the passengers receive smartphone-based information containing elements that might influence the travel decisions in relation to line loads, as well as passenger benefits, and the paper discusses the transition from the current widespread choosing approach to a personalized decision-making approach based on smartphone information. The approach associated with smartphone guidance that considers passengers’ preference on travel time, waiting time and transfer is proposed in the process of obtaining his/her preferred route from the potential travel routes generated by the Deep First Search (DFS) method. Two other approaches, based on the scenarios reflecting reality, include passengers with access to no real time information, and passengers that only have access to the arrival time at the platform are used as comparisons. For illustration, the same network proposed by Spiess and Florian is utilized on the experiments in an agent-based model. Two experiments are conducted respectively according to whether each passenger’s choosing method is consistent. As expected, the results in the first experiment showed that the travel for consistent passengers with smartphone guidance was clearly shorter and that it can reduce travel time exceeding 15% and weighted cost exceeding 20%, and the average saved time approximated 3.88 minutes per passenger. The second experiment presented that travel cost, as well as cost savings, gradually decreased by employing smartphone guidance, and the maximum cost savings accounted for 14.2% of the total weighted cost. [ABSTRACT FROM AUTHOR]

Recommender systems are vulnerable to shilling attacks. Forged user-generated content data, such as user ratings and reviews, are used by attackers to manipulate recommendation rankings. Shilling attack detection in recommender systems is of great significance to maintain the fairness and sustainability of recommender systems. The current studies have problems in terms of the poor universality of algorithms, difficulty in selection of user profile attributes, and lack of an optimization mechanism. In this paper, a shilling behaviour detection structure based on abnormal group user findings and rating time series analysis is proposed. This paper adds to the current understanding in the field by studying the credibility evaluation model in-depth based on the rating prediction model to derive proximity-based predictions. A method for detecting suspicious ratings based on suspicious time windows and target item analysis is proposed. Suspicious rating time segments are determined by constructing a time series, and data streams of the rating items are examined and suspicious rating segments are checked. To analyse features of shilling attacks by a group user’s credibility, an abnormal group user discovery method based on time series and time window is proposed. Standard testing datasets are used to verify the effect of the proposed method. [ABSTRACT FROM AUTHOR]

How to effectively solve traffic congestion and transportation pollution in urban development is a main research emphasis for transportation management agencies. A carbon emissions tax can affect travelers’ generalized costs and will lead to changes in passenger demand, mode choice and traffic flow equilibrium in road networks, which are of significance in green travel and low-carbon transportation management. This paper first established a mesoscopic model to calculate the carbon emissions tax and determined the value of this charge in China, which was based on road traffic flow, vehicle speed, and carbon emissions. Referring to existing research results to calibrate the value of time, this paper modified the traveler’s generalized cost function, including the carbon emissions tax, fuel surcharge and travel time cost, which can be used in the travel impedance model with the consideration of the carbon emissions tax. Then, a method for analyzing urban road network traffic flow distribution was put forward, and a joint traffic distribution model was established, which considered the relationship between private cars and taxis. Finally, this paper took the city of Panjin as an example to analyze the road traffic carbon emissions tax’s impact. The results illustrated that the carbon emissions tax has a positive effect on road network flow equilibrium and carbon emission reduction. This paper will have good reference value and practical significance for the calculation and implementation of urban traffic carbon emissions taxes in China. [ABSTRACT FROM AUTHOR]

Miniaturization of computer hardware and the demand for network capable devices has resulted in the emergence of a new class of technology called wearable computing. Wearable devices have many purposes like lifestyle support, health monitoring, fitness monitoring, entertainment, industrial uses, and gaming. Wearable devices are hurriedly being marketed in an attempt to capture an emerging market. Owing to this, some devices do not adequately address the need for security. To enable virtualization and connectivity wearable devices sense and transmit data, therefore it is essential that the device, its data and the user are protected. In this paper the use of novel Integrated Circuit Metric (ICMetric) technology for the provision of security in wearable devices has been suggested. ICMetric technology uses the features of a device to generate an identification which is then used for the provision of cryptographic services. This paper explores how a device ICMetric can be generated by using the accelerometer and gyroscope sensor. Since wearable devices often operate in a group setting the work also focuses on generating a group identification which is then used to deliver services like authentication, confidentiality, secure admission and symmetric key generation. Experiment and simulation results prove that the scheme offers high levels of security without compromising on resource demands. [ABSTRACT FROM AUTHOR]

Pruning is applied in order to combat over-fitting problem where the tree is pruned back with the goal of identifying decision tree with the lowest error rate on previously unobserved instances, breaking ties in favour of smaller trees with high accuracy. In this paper, pruning with Bayes minimum risk is introduced for estimating the risk-rate. This method proceeds in a bottom-up fashion converting a parent node of a subtree to a leaf node if the estimated risk-rate of the parent node for that subtree is less than the risk-rates of its leaf. This paper proposes a post-pruning method that considers various evaluation standards such as attribute selection, accuracy, tree complexity, and time taken to prune the tree, precision/recall scores, TP/FN rates and area under ROC. The experimental results show that the proposed method produces better classification accuracy and its complexity is not much different than the complexities of reduced-error pruning and minimum-error pruning approaches. The experiments also demonstrate that the proposed method shows satisfactory performance in terms of precision score, recall score, TP rate, FP rate and area under ROC. [ABSTRACT FROM AUTHOR]

Machine Learning (ML) methods have been proposed in the academic literature as alternatives to statistical ones for time series forecasting. Yet, scant evidence is available about their relative performance in terms of accuracy and computational requirements. The purpose of this paper is to evaluate such performance across multiple forecasting horizons using a large subset of 1045 monthly time series used in the M3 Competition. After comparing the post-sample accuracy of popular ML methods with that of eight traditional statistical ones, we found that the former are dominated across both accuracy measures used and for all forecasting horizons examined. Moreover, we observed that their computational requirements are considerably greater than those of statistical methods. The paper discusses the results, explains why the accuracy of ML models is below that of statistical ones and proposes some possible ways forward. The empirical results found in our research stress the need for objective and unbiased ways to test the performance of forecasting methods that can be achieved through sizable and open competitions allowing meaningful comparisons and definite conclusions. [ABSTRACT FROM AUTHOR]

This paper addresses patient-reported outcomes (PROs) and telemonitoring in congestive heart failure (CHF), both increasingly important topics. The interest in CHF trials is shifting from hard end-points such as hospitalization and mortality, to softer end-points such health-related quality of life. However, the relation of these softer end-points to objective parameters is not well studied. Telemonitoring is suitable for collecting both patient-reported outcomes and objective parameters. Most telemonitoring studies, however, do not take full advantage of the available sensor technology and intelligent data analysis. The Chiron clinical observational study was performed among 24 CHF patients (17 men and 7 women, age 62.9 ± 9.4 years, 15 NYHA class II and 9 class III, 10 of ishaemic, aetiology, 6 dilated, 2 valvular, and 6 of multiple aetiologies or cardiomyopathy) in Italy and UK. A large number of physiological and ambient parameters were collected by wearable and other devices, together with PROs describing how well the patients felt, over 1,086 days of observation. The resulting data were mined for relations between the objective parameters and the PROs. The objective parameters (humidity, ambient temperature, blood pressure, SpO2, and sweeting intensity) could predict the PROs with accuracies up to 86% and AUC up to 0.83, making this the first report providing evidence for ambient and physiological parameters to be objectively related to PROs in CHF patients. We also analyzed the relations in the predictive models, gaining some insights into what affects the feeling of health, which was also generally not attempted in previous investigations. The paper strongly points to the possibility of using PROs as primary end-points in future trials. [ABSTRACT FROM AUTHOR]

Human-computer interface systems whose input is based on eye movements can serve as a means of communication for patients with locked-in syndrome. Eye-writing is one such system; users can input characters by moving their eyes to follow the lines of the strokes corresponding to characters. Although this input method makes it easy for patients to get started because of their familiarity with handwriting, existing eye-writing systems suffer from slow input rates because they require a pause between input characters to simplify the automatic recognition process. In this paper, we propose a continuous eye-writing recognition system that achieves a rapid input rate because it accepts characters eye-written continuously, with no pauses. For recognition purposes, the proposed system first detects eye movements using electrooculography (EOG), and then a hidden Markov model (HMM) is applied to model the EOG signals and recognize the eye-written characters. Additionally, this paper investigates an EOG adaptation that uses a deep neural network (DNN)-based HMM. Experiments with six participants showed an average input speed of 27.9 character/min using Japanese Katakana as the input target characters. A Katakana character-recognition error rate of only 5.0% was achieved using 13.8 minutes of adaptation data. [ABSTRACT FROM AUTHOR]

Several power allocation algorithms for cooperative relay networks are presented in the literature. These contributions assume perfect channel knowledge and capacity achieving codes. However in practice, obtaining the channel state information at a relay or at the destination is an estimation problem and can generally not be error free. The investigation of the power allocation mechanism in a wireless network due to channel imperfections is important because it can severely degrade its performance regarding throughput and bit error rate. In this paper, the impact of imperfect channel state information on the power allocation of an adaptive relay network is investigated. Moreover, a framework including Automatic Repeat reQuest (ARQ) mechanism is provided to make the power allocation mechanism robust against these channel imperfections. For this framework, the end-to-end SNR is calculated considering imperfect channel knowledge using ARQ analytically. The goal is to emphasize the impact of imperfect channel knowledge on the power allocation mechanism. In this paper, the simulation results illustrate the impact of channel uncertainties on the average outage probability, throughput, and consumed sum power for different qualities of channel estimation. It is shown that the presented framework with ARQ is extremely robust against the channel imperfections. [ABSTRACT FROM AUTHOR]

Lasers have recently been introduced as an alternative means of conditioning dental ceramic surfaces in order to enhance their adhesive strength to cements and other materials. The present systematic review and meta-analysis aimed to review and quantitatively analyze the available literature in order to determine which bond protocols and laser types are the most effective. A search was conducted in the Pubmed, Embase and Scopus databases for papers published up to April 2017. PRISMA guidelines for systematic review and meta-analysis were followed. Fifty-two papers were eligible for inclusion in the review. Twenty-five studies were synthesized quantitatively. Lasers were found to increase bond strength of ceramic surfaces to resin cements and composites when compared with control specimens (p-value < 0.01), whereas no significant differences were found in comparison with air-particle abraded surfaces. High variability can be observed in adhesion values between different analyses, pointing to a need to standardize study protocols and to determine the optimal parameters for each laser type. [ABSTRACT FROM AUTHOR]

Traffic surveillance systems are interesting to many researchers to improve the traffic control and reduce the risk caused by accidents. In this area, many published works are only concerned about vehicle detection in normal conditions. The camera may vibrate due to wind or bridge movement. Detection and tracking of vehicles is a very difficult task when we have bad weather conditions in winter (snowy, rainy, windy, etc.), dusty weather in arid and semi-arid regions, at night, etc. Also, it is very important to consider speed of vehicles in the complicated weather condition. In this paper, we improved our method to track and count vehicles in dusty weather with vibrating camera. For this purpose, we used a background subtraction based strategy mixed with an extra processing to segment vehicles. In this paper, the extra processing included the analysis of the headlight size, location, and area. In our work, tracking was done between consecutive frames via a generalized particle filter to detect the vehicle and pair the headlights using the connected component analysis. So, vehicle counting was performed based on the pairing result, with Centroid of each blob we calculated distance between two frames by simple formula and hence dividing it by the time between two frames obtained from the video. Our proposed method was tested on several video surveillance records in different conditions such as dusty or foggy weather, vibrating camera, and in roads with medium-level traffic volumes. The results showed that the new proposed method performed better than our previously published method and other methods, including the Kalman filter or Gaussian model, in different traffic conditions. [ABSTRACT FROM AUTHOR]

Publication metadata help deliver rich analyses of scholarly communication. However, research concepts and ideas are more effectively expressed through unstructured fields such as full texts. Thus, the goals of this paper are to employ a full-text enabled method to extract terms relevant to disciplinary vocabularies, and through them, to understand the relationships between disciplines. This paper uses an efficient, domain-independent term extraction method to extract disciplinary vocabularies from a large multidisciplinary corpus of PLoS ONE publications. It finds a power-law pattern in the frequency distributions of terms present in each discipline, indicating a semantic richness potentially sufficient for further study and advanced analysis. The salient relationships amongst these vocabularies become apparent in application of a principal component analysis. For example, Mathematics and Computer and Information Sciences were found to have similar vocabulary use patterns along with Engineering and Physics; while Chemistry and the Social Sciences were found to exhibit contrasting vocabulary use patterns along with the Earth Sciences and Chemistry. These results have implications to studies of scholarly communication as scholars attempt to identify the epistemological cultures of disciplines, and as a full text-based methodology could lead to machine learning applications in the automated classification of scholarly work according to disciplinary vocabularies. [ABSTRACT FROM AUTHOR]

In developing nations, many expanding cities are facing challenges that result from the overwhelming numbers of people and vehicles. Collecting real-time, reliable and precise traffic flow information is crucial for urban traffic management. The main purpose of this paper is to develop an adaptive model that can assess the real-time vehicle counts on urban roads using computer vision technologies. This paper proposes an automatic real-time background update algorithm for vehicle detection and an adaptive pattern for vehicle counting based on the virtual loop and detection line methods. In addition, a new robust detection method is introduced to monitor the real-time traffic congestion state of road section. A prototype system has been developed and installed on an urban road for testing. The results show that the system is robust, with a real-time counting accuracy exceeding 99% in most field scenarios. [ABSTRACT FROM AUTHOR]

Vagus nerve stimulation (VNS) is an established adjunctive therapy for pharmacologically refractory epilepsy and depression and is currently in active clinical research for other applications. In current clinical studies, VNS is delivered in an open-loop approach, where VNS parameters are defined during a manual titration phase. However, the physiological response to a given VNS configuration shows significant inter and intra-patient variability and may significantly evolve through time. VNS closed-loop approaches, allowing for the optimization of the therapy in an adaptive manner, may be necessary to improve efficacy while reducing side effects. This paper proposes a generic, closed-loop control VNS system that is able to optimize a number of VNS parameters in an adaptive fashion, in order to keep a control variable within a specified range. Although the proposed control method is completely generic, an example application using the cardiac beat to beat interval (RR) as control variable will be developed in this paper. The proposed controller is based on a state transition model (STM) that can be configured using a partially or a fully-connected architecture, different model orders and different state-transition algorithms. The controller is applied to the adaptive regulation of heart rate and evaluated on 6 sheep, for 13 different targets, using partially-connected STM with 10 states. Also, partially and fully-connected STM defined by 30 states were applied to 7 other sheep for the same 10 targets. Results illustrate the interest of the proposed fully-connected STM and the feasibility of integrating this control system into an implantable neuromodulator. [ABSTRACT FROM AUTHOR]

Many countries have some kind of energy-system transformation either planned or ongoing for various reasons, such as to curb carbon emissions or to compensate for the phasing out of nuclear energy. One important component of these transformations is the overall reduction in energy demand. It is generally acknowledged that the domestic sector represents a large share of total energy consumption in many countries. Increased energy efficiency is one factor that reduces energy demand, but behavioral approaches (known as “sufficiency”) and their respective interventions also play important roles. In this paper, we address citizens’ heterogeneity regarding both their current behaviors and their willingness to realize their sufficiency potentials—that is, to reduce their energy consumption through behavioral change. We collaborated with three Swiss cities for this study. A survey conducted in the three cities yielded thematic sets of energy-consumption behavior that various groups of participants rated differently. Using this data, we identified four groups of participants with different patterns of both current behaviors and sufficiency potentials. The paper discusses intervention types and addresses citizens’ heterogeneity and behaviors from a city-based perspective. [ABSTRACT FROM AUTHOR]

This paper aims to optimize a desirable fare structure for the public transit service along a bus-subway corridor with the consideration of those factors related to equity in trip, including travel distance and comfort level. The travel distance factor is represented by the distance-based fare strategy, which is an existing differential strategy. The comfort level one is considered in the area-based fare strategy which is a new differential strategy defined in this paper. Both factors are referred to by the combined fare strategy which is composed of distance-based and area-based fare strategies. The flat fare strategy is applied to determine a reference level of social welfare and obtain the general passenger flow along transit lines, which is used to divide areas or zones along the corridor. This problem is formulated as a bi-level program, of which the upper level maximizes the social welfare and the lower level capturing traveler choice behavior is a variable-demand stochastic user equilibrium assignment model. A genetic algorithm is applied to solve the bi-level program while the method of successive averages is adopted to solve the lower-level model. A series of numerical experiments are carried out to illustrate the performance of the models and solution methods. Numerical results indicate that all three differential fare strategies play a better role in enhancing the social welfare than the flat fare strategy and that the fare structure under the combined fare strategy generates the highest social welfare and the largest resulting passenger demand, which implies that the more equity factors a differential fare strategy involves the more desirable fare structure the strategy has. [ABSTRACT FROM AUTHOR]

In this paper, new Network Data Envelopment Analysis (NDEA) models are developed to evaluate the efficiency of regional electricity power networks. The primary objective of this paper is to consider perturbation in data and develop new NDEA models based on the adaptation of robust optimization methodology. Furthermore, in this paper, the efficiency of the entire networks of electricity power, involving generation, transmission and distribution stages is measured. While DEA has been widely used to evaluate the efficiency of the components of electricity power networks during the past two decades, there is no study to evaluate the efficiency of the electricity power networks as a whole. The proposed models are applied to evaluate the efficiency of 16 regional electricity power networks in Iran and the effect of data uncertainty is also investigated. The results are compared with the traditional network DEA and parametric SFA methods. Validity and verification of the proposed models are also investigated. The preliminary results indicate that the proposed models were more reliable than the traditional Network DEA model. [ABSTRACT FROM AUTHOR]

Urban spaces have a great impact on how people’s emotion and behaviour. There are number of factors that impact our brain responses to a space. This paper presents a novel urban place recommendation approach, that is based on modelling in-situ EEG data. The research investigations leverages on newly affordable Electroencephalogram (EEG) headsets, which has the capability to sense mental states such as meditation and attention levels. These emerging devices have been utilized in understanding how human brains are affected by the surrounding built environments and natural spaces. In this paper, mobile EEG headsets have been used to detect mental states at different types of urban places. By analysing and modelling brain activity data, we were able to classify three different places according to the mental state signature of the users, and create an association map to guide and recommend people to therapeutic places that lessen brain fatigue and increase mental rejuvenation. Our mental states classifier has achieved accuracy of (%90.8). NeuroPlace breaks new ground not only as a mobile ubiquitous brain monitoring system for urban computing, but also as a system that can advise urban planners on the impact of specific urban planning policies and structures. We present and discuss the challenges in making our initial prototype more practical, robust, and reliable as part of our on-going research. In addition, we present some enabling applications using the proposed architecture. [ABSTRACT FROM AUTHOR]

Background: Daodi-herb is a part of Chinese culture, which has been naturally selected by traditional Chinese medicine clinical practice for many years. Sweet wormwood herb is a kind of Daodi-herb, and comes from Artemisia annua L. Artemisinin is a kind of effective antimalarial drug being extracted from A. annua. Because of artemisinin, Sweet wormwood herb earns a reputation. Based on the Pharmacopoeia of the People's Republic of China (PPRC), Sweet wormwood herb can be used to resolve summerheat-heat, and prevent malaria. Besides, it also has other medical efficacies. A. annua, a medicinal plant that is widely distributed in the world contains many kinds of chemical composition. Research has shown that compatibility of artemisinin, scopoletin, arteannuin B and arteannuic acid has antimalarial effect. Compatibility of scopoletin, arteannuin B and arteannuic acid is conducive to resolving summerheat-heat. Chemical constituents in A. annua vary significantly according to geographical locations. So, distribution of A. annua may play a key role in the characteristics of efficacy and chemical constituents of Sweet wormwood herb. It is of great significance to study this relationship. Objectives: We mainly analyzed the relationship between the chemical constituents (arteannuin B, artemisinin, artemisinic acid, and scopoletin) with special efficacy in A. annua that come from different provinces in china, and analyzed the relationship between chemical constituents and spatial distribution, in order to find out the relationship between efficacy, chemical constituents and distribution. Methods: A field survey was carried out to collect A. annua plant samples. A global positioning system (GPS) was used for obtaining geographical coordinates of sampling sites. Chemical constituents in A. annua were determined by liquid chromatography tandem an atmospheric pressure ionization-electrospray mass spectrometry. Relationship between chemical constituents including proportions, correlation analysis (CoA), principal component analysis (PCA) and cluster analysis (ClA) was displayed through Excel and R software version2.3.2(R), while the one between efficacy, chemical constituents and spatial distribution was presented through ArcGIS10.0, Excel and R software. Results: According to the results of CoA, arteannuin B content presented a strong positive correlation with artemisinic acid content (p = 0), and a strong negative correlation with artemisinin content (p = 0). Scopoletin content presented a strong positive correlation with artemisinin content (p = 0), and a strong negative correlation with artemisinic acid content (p = 0). According to the results of PCA, the first two principal components accounted for 81.57% of the total accumulation contribution rate. The contribution of the first principal component is about 45.12%, manly including arteannuin B and artemisinic acid. The contribution of the second principal component is 36.45% of the total, manly including artemisinin and scopoletin. According to the ClA by using the principal component scores, 19 provinces could be divided into two groups. In terms of provinces in group one, the proportions of artemisinin are all higher than 80%. Based on the results of PCA, ClA, percentages and scatter plot analysis, chemical types are defined as "QHYS type", "INT type" and "QHS type." Conclusion: As a conclusion, this paper shows the relationship between efficacy, chemical constituents and distribution. Sweet wormwood herb with high arteannuin B and artemisinic acid content, mainly distributes in northern China. Sweet wormwood herb with high artemisinin and scopoletin content has the medical function of preventing malaria, which mainly distributes in southern China. In this paper, it is proved that Sweet wormwood Daodi herb growing in particular geographic regions, has more significant therapeutical effect and higher chemical constituents compared with other same kind of CMM. And also, it has proved the old saying in China that Sweet wormwood Daodi herb which has been used to resolve summerheat-heat and prevent malaria, which distributed in central China. But in modern time, Daodi Sweet wormwood herb mainly has been used to extract artemisinin and prevent malaria, so the Daod-region has transferred to the southern China. [ABSTRACT FROM AUTHOR]

Network modeling in electromagnetics is an effective technique in treating scattering problems by canonical and complex structures. Geometries constituted of angular regions (wedges) together with planar layers can now be approached with the Generalized Wiener-Hopf Technique supported by network representation in spectral domain. Even if the network representations in spectral planes are of great importance by themselves, the aim of this paper is to present a theoretical base and a general procedure for the formulation of complex scattering problems using network representation for the Generalized Wiener Hopf Technique starting basically from the wave equation. In particular while the spectral network representations are relatively well known for planar layers, the network modelling for an angular region requires a new theory that will be developed in this paper. With this theory we complete the formulation of a network methodology whose effectiveness is demonstrated by the application to a complex scattering problem with practical solutions given in terms of GTD/UTD diffraction coefficients and total far fields for engineering applications. The methodology can be applied to other physics fields. [ABSTRACT FROM AUTHOR]

Although high degrees of reliability have been found for many types of forecasts purportedly due to the existence of accountability, public forecasts of technology are rarely assessed and continue to have a poor reputation. This paper’s analysis of forecasts made by MIT’s Technology Review provides a rare assessment and thus a means to encourage accountability. It first shows that few of the predicted “breakthrough technologies” currently have large markets. Only four have sales greater than $10 billion while eight technologies not predicted by Technology Review have sales greater than $10 billion including three with greater than $100 billion and one other with greater than $50 billion. Second, possible reasons for these poor forecasts are then discussed including an over emphasis on the science-based process of technology change, sometimes called the linear model of innovation. Third, this paper describes a different model of technology change, one that is widely used by private companies and that explains the emergence of those technologies that have greater than $10 billion in sales. Fourth, technology change and forecasts are discussed in terms of cognitive biases and mental models. [ABSTRACT FROM AUTHOR]

This paper presents a method for formation flight and collision avoidance of multiple UAVs. Due to the shortcomings such as collision avoidance caused by UAV’s high-speed and unstructured environments, this paper proposes a modified tentacle algorithm to ensure the high performance of collision avoidance. Different from the conventional tentacle algorithm which uses inverse derivation, the modified tentacle algorithm rapidly matches the radius of each tentacle and the steering command, ensuring that the data calculation problem in the conventional tentacle algorithm is solved. Meanwhile, both the speed sets and tentacles in one speed set are reduced and reconstructed so as to be applied to multiple UAVs. Instead of path iterative optimization, the paper selects the best tentacle to obtain the UAV collision avoidance path quickly. The simulation results show that the method presented in the paper effectively enhances the performance of flight formation and collision avoidance for multiple high-speed UAVs in unstructured environments. [ABSTRACT FROM AUTHOR]

Wireless Sensor Networks (WSNs) are becoming ubiquitous in everyday life due to their applications in weather forecasting, surveillance, implantable sensors for health monitoring and other plethora of applications. WSN is equipped with hundreds and thousands of small sensor nodes. As the size of a sensor node decreases, critical issues such as limited energy, computation time and limited memory become even more highlighted. In such a case, network lifetime mainly depends on efficient use of available resources. Organizing nearby nodes into clusters make it convenient to efficiently manage each cluster as well as the overall network. In this paper, we extend our previous work of grid-based hybrid network deployment approach, in which merge and split technique has been proposed to construct network topology. Constructing topology through our proposed technique, in this paper we have used analytical network process (ANP) model for cluster head selection in WSN. Five distinct parameters: distance from nodes (DistNode), residual energy level (REL), distance from centroid (DistCent), number of times the node has been selected as cluster head (TCH) and merged node (MN) are considered for CH selection. The problem of CH selection based on these parameters is tackled as a multi criteria decision system, for which ANP method is used for optimum cluster head selection. Main contribution of this work is to check the applicability of ANP model for cluster head selection in WSN. In addition, sensitivity analysis is carried out to check the stability of alternatives (available candidate nodes) and their ranking for different scenarios. The simulation results show that the proposed method outperforms existing energy efficient clustering protocols in terms of optimum CH selection and minimizing CH reselection process that results in extending overall network lifetime. This paper analyzes that ANP method used for CH selection with better understanding of the dependencies of different components involved in the evaluation process. [ABSTRACT FROM AUTHOR]