Search

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors’ collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews. [ABSTRACT FROM AUTHOR]

Basic color terms used in Mandarin Chinese have been controversial since first discussed by Berlin and Kay in 1969. Previous studies showed much inconsistency on what should be considered as basic color terms in Mandarin Chinese. In the present study, we investigated categories of color rather than merely the color terms used by Taiwanese native Mandarin speakers. Using samples conforming to the Berlin and Kay survey, various colors were chosen from a collection of Natural Color System (NCS) colored papers and mounted on a piece of neutral gray card. The card was then mounted on a touch-screen, under D65 illumination. Thirty-two single-character color related Mandarin terms were selected from a Chinese character database according to frequency of use. Participants were required to select the color sample that matched the term by pressing a virtual button on the touch screen. The results show that certain terms can be directly correlated to basic color terms in English, comparable with the results of Berlin and Kay’s original study and those that followed. However, some terms, such as Mo (墨 ink), Tie (鐵 iron), and Cai (菜vegetable), show a wide spread of term maps and inconsistent use among subjects. Principle component analysis (PCA) procedures were used to analysis the commodity of data among subjects. The findings suggest that the basic color categories among Mandarin Chinese speakers are similar to those found in the World Color Survey (WCS), but are represented by wide-spread and inconsistent color terms among speakers. [ABSTRACT FROM AUTHOR]

Complex network theory has been successful at unveiling the topology of the brain and showing alterations to the network structure due to brain disease, cognitive function and behavior. Functional connectivity networks (FCNs) represent different brain regions as the nodes and the connectivity between them as the edges of a graph. Graph theoretic measures provide a way to extract features from these networks enabling subsequent characterization and discrimination of networks across conditions. However, these measures are constrained mostly to binary networks and highly dependent on the network size. In this paper, we propose a novel graph-to-signal transform that overcomes these shortcomings to extract features from functional connectivity networks. The proposed transformation is based on classical multidimensional scaling (CMDS) theory and transforms a graph into signals such that the Euclidean distance between the nodes of the network is preserved. In this paper, we propose to use the resistance distance matrix for transforming weighted functional connectivity networks into signals. Our results illustrate how well-known network structures transform into distinct signals using the proposed graph-to-signal transformation. We then compute well-known signal features on the extracted graph signals to discriminate between FCNs constructed across different experimental conditions. Based on our results, the signals obtained from the graph-to-signal transformation allow for the characterization of functional connectivity networks, and the corresponding features are more discriminative compared to graph theoretic measures. [ABSTRACT FROM AUTHOR]

Dementia is a neurological and cognitive condition that affects millions of people around the world. At any given time in the United Kingdom, 1 in 4 hospital beds are occupied by a person with dementia, while about 22% of these hospital admissions are due to preventable causes. In this paper we discuss using Internet of Things (IoT) technologies and in-home sensory devices in combination with machine learning techniques to monitor health and well-being of people with dementia. This will allow us to provide more effective and preventative care and reduce preventable hospital admissions. One of the unique aspects of this work is combining environmental data with physiological data collected via low cost in-home sensory devices to extract actionable information regarding the health and well-being of people with dementia in their own home environment. We have worked with clinicians to design our machine learning algorithms where we focused on developing solutions for real-world settings. In our solutions, we avoid generating too many alerts/alarms to prevent increasing the monitoring and support workload. We have designed an algorithm to detect Urinary Tract Infections (UTI) which is one of the top five reasons of hospital admissions for people with dementia (around 9% of hospital admissions for people with dementia in the UK). To develop the UTI detection algorithm, we have used a Non-negative Matrix Factorisation (NMF) technique to extract latent factors from raw observation and use them for clustering and identifying the possible UTI cases. In addition, we have designed an algorithm for detecting changes in activity patterns to identify early symptoms of cognitive decline or health decline in order to provide personalised and preventative care services. For this purpose, we have used an Isolation Forest (iForest) technique to create a holistic view of the daily activity patterns. This paper describes the algorithms and discusses the evaluation of the work using a large set of real-world data collected from a trial with people with dementia and their caregivers. [ABSTRACT FROM AUTHOR]

Analysis of functional magnetic resonance imaging (fMRI) data has revealed that brain regions can be grouped into functional brain networks (fBNs) or communities. A community in fMRI analysis signifies a group of brain regions coupled functionally with one another. In neuroimaging, functional connectivity (FC) measure can be utilized to quantify such functionally connected regions for disease diagnosis and hence, signifies the need of devising novel FC estimation methods. In this paper, we propose a novel method of learning FC by constraining its rank and the sum of non-zero coefficients. The underlying idea is that fBNs are sparse and can be embedded in a relatively lower dimension space. In addition, we propose to extract overlapping networks. In many instances, communities are characterized as combinations of disjoint brain regions, although recent studies indicate that brain regions may participate in more than one community. In this paper, large-scale overlapping fBNs are identified on resting state fMRI data by employing non-negative matrix factorization. Our findings support the existence of overlapping brain networks. [ABSTRACT FROM AUTHOR]

This paper, based on differential privacy protecting K-means clustering algorithm, realizes privacy protection by adding data-disturbing Laplace noise to cluster center point. In order to solve the problem of Laplace noise randomness which causes the center point to deviate, especially when poor availability of clustering results appears because of small privacy budget parameters, an improved differential privacy protecting K-means clustering algorithm was raised in this paper. The improved algorithm uses the contour coefficients to quantitatively evaluate the clustering effect of each iteration and add different noise to different clusters. In order to be adapted to the huge number of data, this paper provides an algorithm design in MapReduce Framework. Experimental finding shows that the new algorithm improves the availability of the algorithm clustering results under the condition of ensuring individual privacy without significantly increasing its operating time. [ABSTRACT FROM AUTHOR]

Diabetic retinopathy (DR) is a disease which is widely diagnosed using (colour fundus) images. Efficiency and accuracy are critical in diagnosing DR as lack of timely intervention can lead to irreversible visual impairment. In this paper, we examine strategies for scrutinizing images which affect diagnostic performance of medical practitioners via an eye-tracking study. A total of 56 subjects with 0 to 18 years of experience participated in the study. Every subject was asked to detect DR from 40 images. The findings indicate that practitioners use mainly two types of strategies characterized by either higher dwell duration or longer track length. The main findings of the study are that higher dwell-based strategy led to higher average accuracy (> 85%) in diagnosis, irrespective of the expertise of practitioner; whereas, the average obtained accuracy with a long-track length-based strategy was dependent on the expertise of the practitioner. In the second part of the paper, we use the experimental findings to recommend a scanning strategy for fast and accurate diagnosis of DR that can be potentially used by image readers. This is derived by combining the eye-tracking gaze maps of medical experts in a novel manner based on a set of rules. This strategy requires scrutiny of images in a manner which is consistent with spatial preferences found in human perception in general and in the domain of fundus images in particular. The Levenshtein distance-based assessment of gaze patterns also establish the effectiveness of the derived scanning pattern and is thus recommended for image readers. [ABSTRACT FROM AUTHOR]

In this paper we investigate the changes in the functional connectivity intensity, and some related properties, in healthy people, across the life span and at resting state. For the explicit computation of the functional connectivity we exploit a recently proposed model, that bases not only on the correlations data provided by the acquisition equipment, but also on different parameters, such as the anatomical distances between nodes and their degrees. The leading purpose of the paper is to show that the proposed approach is able to recover the main aspects of resting state condition known from the available literature, as well as to suggest new insights, perspectives and speculations from a neurobiological point of view. Our study involves 133 subjects, both males and females of different ages, with no evidence of neurological diseases or systemic disorders. First, we show how the model applies to the sample, where the subjects are grouped into 28 different groups (14 of males and 14 of females), according to their age. This leads to the construction of two graphs (one for males and one for females), that can be realistically interpreted as representative of the neural network during the resting state. Second, following the idea that the brain network is better understood by focusing on specific nodes having a kind of centrality, we refine the two output graphs by introducing a new metric that favours the selection of nodes having higher degrees. As a third step, we extensively comment and discuss the obtained results. In particular, it is remarkable that, despite a great overlapping exists between the outcomes concerning males and females, some intriguing differences appear. This motivates a deeper local investigation, which represents the fourth part of the paper, carried out through a thorough statistical analysis. As a result, we are enabled to support that, for two special age groups, a few links contribute in differentiating the behaviour of males and females. In addition, we performed an average-based comparison between the proposed model and the traditional statistical correlation-based approach, then discussing and commenting the main outlined discrepancies. [ABSTRACT FROM AUTHOR]

Glioma detection and segmentation is a challenging task for radiologists and clinicians. The research reported in this paper seeks to develop a better clinical decision support algorithm for clinicians diagnosis. This paper presents a probabilistic method for detection and segmentation between abnormal tissue regions and brain tumour (tumour core and edema) portions from Magnetic Resonance Imaging (MRI). A framework is constructed to learn structure of undirected graphical models that can represent the spatial relationships among variables and apply it to glioma segmentation. Compared with the pixel of image, the superpixel is more consistent with human visual cognition and contains less redundancy, thus, the superpixels are considered as the basic unit of structure learning and glioma segmentation scheme. ℓ1-regularization techniques are applied to learn the appropriate structure for modeling graphical models. Conditional Random Fields (CRF) are used to model the spatial interactions among image superpixel regions and their measurements. A number of features including statistics features, the combined features from the local binary pattern as well as gray level run length, curve features, and fractal features were extracted from each superpixel. The features are then passed by ℓ1-regularization to ensure a robust classification. The proposed method is compared with support vector machine and Fuzzy c-means to classify each superpixel into normal and abnormal tissue. The proposed system is tested for the presence of low grade as well as high grade glioma tumors on images collected from BRATS2013, BRATS2015 data set and Henan Provincial People’s Hospital (HNPPH) data set. The experiments performed provides similarity between segmented and truth image up to 91.5% by correlation method. [ABSTRACT FROM AUTHOR]

Purpose: The 2014 outbreak of Ebola virus disease (EVD) in West Africa was the largest in history. Starting in September 2014, International Medical Corps (IMC) operated five Ebola treatment units (ETUs) in Sierra Leone and Liberia. This paper explores how future infectious disease outbreak facilities in resource-limited settings can be planned, organized, and managed by analyzing data collected on water, sanitation, and hygiene (WASH) and infection prevention control (IPC) protocols. Design/Methodology/Approach: We conducted a retrospective cohort study by analyzing WASH/IPC activity data routinely recorded on paper forms or white boards at ETUs during the outbreak and later merged into a database from two IMC-run ETUs in Sierra Leone between December 2014 and December 2015. Findings: The IMC WASH/IPC database contains data from over 369 days. Our results highlight parameters key to designing and maintaining an ETU. High concentration chlorine solution usage was highly correlated with both daily patient occupancy and high-risk zone staff entries; low concentration chlorine usage was less well explained by these measures. There is high demand for laundering and disinfecting of personal protective equipment (PPE) on a daily basis and approximately 1 (0–4) piece of PPE is damaged each day. Research limitations/Implications: Lack of standardization in the type and format of data collected at ETUs made constructing the WASH/IPC database difficult. However, the data presented here may help inform humanitarian response operations in future epidemics. [ABSTRACT FROM AUTHOR]

Background: In practical research, it was found that most people made health-related decisions not based on numerical data but on perceptions. Examples include the perceptions and their corresponding linguistic values of health risks such as, smoking, syringe sharing, eating energy-dense food, drinking sugar-sweetened beverages etc. For the sake of understanding the mechanisms that affect the implementations of health-related interventions, we employ fuzzy variables to quantify linguistic variable in healthcare modeling where we employ an integrated system dynamics and agent-based model. Methodology: In a nonlinear causal-driven simulation environment driven by feedback loops, we mathematically demonstrate how interventions at an aggregate level affect the dynamics of linguistic variables that are captured by fuzzy agents and how interactions among fuzzy agents, at the same time, affect the formation of different clusters(groups) that are targeted by specific interventions. Results: In this paper, we provide an innovative framework to capture multi-stage fuzzy uncertainties manifested among interacting heterogeneous agents (individuals) and intervention decisions that affect homogeneous agents (groups of individuals) in a hybrid model that combines an agent-based simulation model (ABM) and a system dynamics models (SDM). Having built the platform to incorporate high-dimension data in a hybrid ABM/SDM model, this paper demonstrates how one can obtain the state variable behaviors in the SDM and the corresponding values of linguistic variables in the ABM. Conclusions: This research provides a way to incorporate high-dimension data in a hybrid ABM/SDM model. This research not only enriches the application of fuzzy set theory by capturing the dynamics of variables associated with interacting fuzzy agents that lead to aggregate behaviors but also informs implementation research by enabling the incorporation of linguistic variables at both individual and institutional levels, which makes unstructured linguistic data meaningful and quantifiable in a simulation environment. This research can help practitioners and decision makers to gain better understanding on the dynamics and complexities of precision intervention in healthcare. It can aid the improvement of the optimal allocation of resources for targeted group (s) and the achievement of maximum utility. As this technology becomes more mature, one can design policy flight simulators by which policy/intervention designers can test a variety of assumptions when they evaluate different alternatives interventions. [ABSTRACT FROM AUTHOR]

Background: Routine Data Quality Assessments (RDQAs) were developed to measure and improve facility-level electronic medical record (EMR) data quality. We assessed if RDQAs were associated with improvements in data quality in KenyaEMR, an HIV care and treatment EMR used at 341 facilities in Kenya. Methods: RDQAs assess data quality by comparing information recorded in paper records to KenyaEMR. RDQAs are conducted during a one-day site visit, where approximately 100 records are randomly selected and 24 data elements are reviewed to assess data completeness and concordance. Results are immediately provided to facility staff and action plans are developed for data quality improvement. For facilities that had received more than one RDQA (baseline and follow-up), we used generalized estimating equation models to determine if data completeness or concordance improved from the baseline to the follow-up RDQAs. Results: 27 facilities received two RDQAs and were included in the analysis, with 2369 and 2355 records reviewed from baseline and follow-up RDQAs, respectively. The frequency of missing data in KenyaEMR declined from the baseline (31% missing) to the follow-up (13% missing) RDQAs. After adjusting for facility characteristics, records from follow-up RDQAs had 0.43-times the risk (95% CI: 0.32–0.58) of having at least one missing value among nine required data elements compared to records from baseline RDQAs. Using a scale with one point awarded for each of 20 data elements with concordant values in paper records and KenyaEMR, we found that data concordance improved from baseline (11.9/20) to follow-up (13.6/20) RDQAs, with the mean concordance score increasing by 1.79 (95% CI: 0.25–3.33). Conclusions: This manuscript demonstrates that RDQAs can be implemented on a large scale and used to identify EMR data quality problems. RDQAs were associated with meaningful improvements in data quality and could be adapted for implementation in other settings. [ABSTRACT FROM AUTHOR]

Miniaturization of computer hardware and the demand for network capable devices has resulted in the emergence of a new class of technology called wearable computing. Wearable devices have many purposes like lifestyle support, health monitoring, fitness monitoring, entertainment, industrial uses, and gaming. Wearable devices are hurriedly being marketed in an attempt to capture an emerging market. Owing to this, some devices do not adequately address the need for security. To enable virtualization and connectivity wearable devices sense and transmit data, therefore it is essential that the device, its data and the user are protected. In this paper the use of novel Integrated Circuit Metric (ICMetric) technology for the provision of security in wearable devices has been suggested. ICMetric technology uses the features of a device to generate an identification which is then used for the provision of cryptographic services. This paper explores how a device ICMetric can be generated by using the accelerometer and gyroscope sensor. Since wearable devices often operate in a group setting the work also focuses on generating a group identification which is then used to deliver services like authentication, confidentiality, secure admission and symmetric key generation. Experiment and simulation results prove that the scheme offers high levels of security without compromising on resource demands. [ABSTRACT FROM AUTHOR]

Pruning is applied in order to combat over-fitting problem where the tree is pruned back with the goal of identifying decision tree with the lowest error rate on previously unobserved instances, breaking ties in favour of smaller trees with high accuracy. In this paper, pruning with Bayes minimum risk is introduced for estimating the risk-rate. This method proceeds in a bottom-up fashion converting a parent node of a subtree to a leaf node if the estimated risk-rate of the parent node for that subtree is less than the risk-rates of its leaf. This paper proposes a post-pruning method that considers various evaluation standards such as attribute selection, accuracy, tree complexity, and time taken to prune the tree, precision/recall scores, TP/FN rates and area under ROC. The experimental results show that the proposed method produces better classification accuracy and its complexity is not much different than the complexities of reduced-error pruning and minimum-error pruning approaches. The experiments also demonstrate that the proposed method shows satisfactory performance in terms of precision score, recall score, TP rate, FP rate and area under ROC. [ABSTRACT FROM AUTHOR]

In his 2016 paper, Myhrvold criticized ours from 2014 on maximum growth rates (Gmax, maximum gain in body mass observed within a time unit throughout an individual’s ontogeny) and thermoregulation strategies (ectothermy, endothermy) of 17 dinosaurs. In our paper, we showed that Gmax values of similar-sized extant ectothermic and endothermic vertebrates overlap. This strongly questions a correct assignment of a thermoregulation strategy to a dinosaur only based on its Gmax and (adult) body mass (M). Contrary, Gmax separated similar-sized extant reptiles and birds (Sauropsida) and Gmax values of our studied dinosaurs were similar to those seen in extant similar-sized (if necessary scaled-up) fast growing ectothermic reptiles. Myhrvold examined two hypotheses (H1 and H2) regarding our study. However, we did neither infer dinosaurian thermoregulation strategies from group-wide averages (H1) nor were our results based on that Gmax and metabolic rate (MR) are related (H2). In order to assess whether single dinosaurian Gmax values fit to those of extant endotherms (birds) or of ectotherms (reptiles), we already used a method suggested by Myhrvold to avoid H1, and we only discussed pros and cons of a relation between Gmax and MR and did not apply it (H2). We appreciate Myhrvold’s efforts in eliminating the correlation between Gmax and M in order to statistically improve vertebrate scaling regressions on maximum gain in body mass. However, we show here that his mass-specific maximum growth rate (kC) replacing Gmax (= MkC) does not model the expected higher mass gain in larger than in smaller species for any set of species. We also comment on, why we considered extant reptiles and birds as reference models for extinct dinosaurs and why we used phylogenetically-informed regression analysis throughout our study. Finally, we question several arguments given in Myhrvold in order to support his results. [ABSTRACT FROM AUTHOR]

Human-computer interface systems whose input is based on eye movements can serve as a means of communication for patients with locked-in syndrome. Eye-writing is one such system; users can input characters by moving their eyes to follow the lines of the strokes corresponding to characters. Although this input method makes it easy for patients to get started because of their familiarity with handwriting, existing eye-writing systems suffer from slow input rates because they require a pause between input characters to simplify the automatic recognition process. In this paper, we propose a continuous eye-writing recognition system that achieves a rapid input rate because it accepts characters eye-written continuously, with no pauses. For recognition purposes, the proposed system first detects eye movements using electrooculography (EOG), and then a hidden Markov model (HMM) is applied to model the EOG signals and recognize the eye-written characters. Additionally, this paper investigates an EOG adaptation that uses a deep neural network (DNN)-based HMM. Experiments with six participants showed an average input speed of 27.9 character/min using Japanese Katakana as the input target characters. A Katakana character-recognition error rate of only 5.0% was achieved using 13.8 minutes of adaptation data. [ABSTRACT FROM AUTHOR]

In this paper, we present a new method to recognise the leaf type and identify plant species using phenetic parts of the leaf; lobes, apex and base detection. Most of the research in this area focuses on the popular features such as the shape, colour, vein, and texture, which consumes large amounts of computational processing and are not efficient, especially in the Acer database with a high complexity structure of the leaves. This paper is focused on phenetic parts of the leaf which increases accuracy. Detecting the local maxima and local minima are done based on Centroid Contour Distance for Every Boundary Point, using north and south region to recognise the apex and base. Digital morphology is used to measure the leaf shape and the leaf margin. Centroid Contour Gradient is presented to extract the curvature of leaf apex and base. We analyse 32 leaf images of tropical plants and evaluated with two different datasets, Flavia, and Acer. The best accuracy obtained is 94.76% and 82.6% respectively. Experimental results show the effectiveness of the proposed technique without considering the commonly used features with high computational cost. [ABSTRACT FROM AUTHOR]

Publication metadata help deliver rich analyses of scholarly communication. However, research concepts and ideas are more effectively expressed through unstructured fields such as full texts. Thus, the goals of this paper are to employ a full-text enabled method to extract terms relevant to disciplinary vocabularies, and through them, to understand the relationships between disciplines. This paper uses an efficient, domain-independent term extraction method to extract disciplinary vocabularies from a large multidisciplinary corpus of PLoS ONE publications. It finds a power-law pattern in the frequency distributions of terms present in each discipline, indicating a semantic richness potentially sufficient for further study and advanced analysis. The salient relationships amongst these vocabularies become apparent in application of a principal component analysis. For example, Mathematics and Computer and Information Sciences were found to have similar vocabulary use patterns along with Engineering and Physics; while Chemistry and the Social Sciences were found to exhibit contrasting vocabulary use patterns along with the Earth Sciences and Chemistry. These results have implications to studies of scholarly communication as scholars attempt to identify the epistemological cultures of disciplines, and as a full text-based methodology could lead to machine learning applications in the automated classification of scholarly work according to disciplinary vocabularies. [ABSTRACT FROM AUTHOR]

The challenge of detecting research topics in a specific research field has attracted attention from researchers in the bibliometrics community. In this study, to solve two problems of clustering papers, i.e., the influence of different distributions of citation links and involved textual features on similarity computation, the authors propose a hybrid self-optimized clustering model to detect research topics by extending the hybrid clustering model to identify “core documents”. First, the Amsler network, consisting of bibliographic coupling and co-citation links, is created to calculate the citation-based similarity based on the cosine angle of papers. Second, the cosine similarity is also used to compute the text-based similarity, which consists of the textual statistical and topological features. Then, the cosine angle of the linear combination of citation- and text-based similarity is considered as the hybrid similarity. Finally, the Louvain method is applied to cluster papers, and the terms based on term frequency are used to label clusters. To test the performance of the proposed model, a dataset related to the data envelopment analysis field is used for comparison and analysis of clustering results. Based on the benchmark built, different clustering methods with different citation links or textual features are compared according to evaluation measures. The results show that the proposed model can obtain reasonable and effective clustering results, and the research topics of data envelopment analysis field are also analyzed based on the proposed model. As different features are considered in the proposed model compared with previous hybrid clustering models, the proposed clustering model can provide inspiration for further studies on topic identification by other researchers. [ABSTRACT FROM AUTHOR]

Vagus nerve stimulation (VNS) is an established adjunctive therapy for pharmacologically refractory epilepsy and depression and is currently in active clinical research for other applications. In current clinical studies, VNS is delivered in an open-loop approach, where VNS parameters are defined during a manual titration phase. However, the physiological response to a given VNS configuration shows significant inter and intra-patient variability and may significantly evolve through time. VNS closed-loop approaches, allowing for the optimization of the therapy in an adaptive manner, may be necessary to improve efficacy while reducing side effects. This paper proposes a generic, closed-loop control VNS system that is able to optimize a number of VNS parameters in an adaptive fashion, in order to keep a control variable within a specified range. Although the proposed control method is completely generic, an example application using the cardiac beat to beat interval (RR) as control variable will be developed in this paper. The proposed controller is based on a state transition model (STM) that can be configured using a partially or a fully-connected architecture, different model orders and different state-transition algorithms. The controller is applied to the adaptive regulation of heart rate and evaluated on 6 sheep, for 13 different targets, using partially-connected STM with 10 states. Also, partially and fully-connected STM defined by 30 states were applied to 7 other sheep for the same 10 targets. Results illustrate the interest of the proposed fully-connected STM and the feasibility of integrating this control system into an implantable neuromodulator. [ABSTRACT FROM AUTHOR]

Urban spaces have a great impact on how people’s emotion and behaviour. There are number of factors that impact our brain responses to a space. This paper presents a novel urban place recommendation approach, that is based on modelling in-situ EEG data. The research investigations leverages on newly affordable Electroencephalogram (EEG) headsets, which has the capability to sense mental states such as meditation and attention levels. These emerging devices have been utilized in understanding how human brains are affected by the surrounding built environments and natural spaces. In this paper, mobile EEG headsets have been used to detect mental states at different types of urban places. By analysing and modelling brain activity data, we were able to classify three different places according to the mental state signature of the users, and create an association map to guide and recommend people to therapeutic places that lessen brain fatigue and increase mental rejuvenation. Our mental states classifier has achieved accuracy of (%90.8). NeuroPlace breaks new ground not only as a mobile ubiquitous brain monitoring system for urban computing, but also as a system that can advise urban planners on the impact of specific urban planning policies and structures. We present and discuss the challenges in making our initial prototype more practical, robust, and reliable as part of our on-going research. In addition, we present some enabling applications using the proposed architecture. [ABSTRACT FROM AUTHOR]

The problem of handling non-ignorable non-response has been typically addressed under the design-based approach using the well-known sub-sampling technique introduced by Hansen and Hurwitz [1946, Journal of the American Statistical Association, Vol 41(236), Page 517- 529]. Alternatively, the model-based paradigm emphasizes on utilizing the underlying model relationship between the outcome variable and one or more covariate(s) whose population values are known prior to the survey. This article utilizes the model relationship between the study variable and covariate(s) for handling non-ignorable non-response and obtaining an unbiased estimator for the population total under the sub-sampling technique. The main idea is to combine the estimates obtained from the sample on first call and the sub-sample from second call using separate model relationships. The contribution of this paper helps us in providing unbiased estimates with an improved efficiency under model-based paradigm in presence of non-ignorable non-response. The provided method is more economical than the available estimators under callback methods as we are working sub-sampling and also increase response rate as a stronger mode of interview is employed for data collection. A numerical study using Monte Carlo is presented to illustrate the behavior of the proposed and the efficiency comparison. [ABSTRACT FROM AUTHOR]

There is a vivid research on securely deliver a secret message by using a data hiding technique in digital images. However, most existing solutions of data-hiding need to encrypt secret data first, and embed the encrypt message into cover image, which is not promising any security once the embedding algorithm is leaked. In this paper, an efficient and adaptive data hiding scheme is presented which is based on a new reference matrix named secure reference matrix. The scheme is flexible enough to meet different data hiding capacities and image quality as needed, and we allow the reference matrix to be more secure since it is randomly generated each time and make it much harder for being attack with exhaustive manner by extending the possible solution. We give the detail protocol for our scheme and provide the practical test and performance analysis. Experimental results show that our scheme has a better flexibility and efficiency in embedding process, and the average value of Peak Signal to Noise Ratio (PSNR) for the stego-images which are generated by our scheme have a higher visual quality for different embedding capacities, and our scheme is more efficient compared with related work. [ABSTRACT FROM AUTHOR]

In this paper, we present a new multi-focus microscope (MFM) system based on a phase mask and HiLo algorithm, achieving high-speed (20 volumes per second), high-resolution, low-noise 3-D fluorescent imaging. During imaging, the emissions from the specimen at nine different depths are simultaneously modulated and focused to different regions on a single CCD chip, i.e., the CCD chip is subdivided into nine regions to record images from the different selected depths. Next, HiLo algorithm is applied to remove the background noises and to form clean 3-D images. To visualize larger volumes, the nine layers are scanned axially, realizing fast 3-D imaging. In the imaging experiments, a mouse kidney sample of ~ 60 × 60 × 16 μm3 is visualized with only 10 raw images, demonstrating substantially enhanced resolution and contrast as well as suppressed background noises. The new method will find important applications in 3-D fluorescent imaging, e.g., recording fast dynamic events at multiple depths in vivo. [ABSTRACT FROM AUTHOR]

To balance the supply and demand in China's beef market, beef consumption must be scientifically and effectively forecasted. Beef consumption is affected by many factors and is characterized by gray uncertainty. Therefore, gray theory can be used to forecast the beef consumption, In this paper, the structural defects and unreasonable parameter design of the traditional gray model are analyzed. Then, a new gray model termed, EGM(1,1,r), is built, and the modeling conditions and error checking methods of EGM(1,1,r) are studied. Then, EGM(1,1,r) is used to simulate and forecast China’s beef consumption. The results show that both the simulation and prediction precisions of the new model are better than those of other gray models. Finally, the new model is used to forecast China’s beef consumption for the period from 2019–2025. The findings will serve as an important reference for the Chinese government in formulating policies to ensure the balance between the supply and demand for Chinese beef. [ABSTRACT FROM AUTHOR]

The analyses of large volumes of metagenomic data extracted from aggregate populations of microscopic organisms residing on and in the human body are advancing contemporary understandings of the integrated participation of microbes in human health and disease. Next generation sequencing technology facilitates said analyses in terms of diversity, community composition, and differential abundance by filtering and binning microbial 16S rRNA genes extracted from human tissues into operational taxonomic units. However, current statistical tools restrict study designs to investigations of limited numbers of host characteristics mediated by limited numbers of samples potentially yielding a loss of relevant information. This paper presents a Bayesian hierarchical negative binomial model as an efficient technique capable of compensating for multivariable sets including tens or hundreds of host characteristics as covariates further expanding analyses of human microbiome count data. Simulation studies reveal that the Bayesian hierarchical negative binomial model provides a desirable strategy by often outperforming three competing negative binomial model in terms of type I error while simultaneously maintaining consistent power. An application of the Bayesian hierarchical negative binomial model using subsets of the open data published by the American Gut Project demonstrates an ability to identify operational taxonomic units significantly differentiable among persons diagnosed by a medical professional with either inflammatory bowel disease or irritable bowel syndrome that are consistent with contemporary gastrointestinal literature. [ABSTRACT FROM AUTHOR]

In this paper we consider the process of the second harmonic generation in a gradient waveguide, taking into account diffraction and relatively weak temporal dispersion. Using the slowly varying envelope approximation and neglecting the dispersion of the nonlinear part of the response of the medium we obtain the system of parabolic equations for the envelopes of both harmonics. We also derive integrals of motion of this system. To solve it numerically we construct a nonlinear finite-difference scheme based on the Crank-Nicolson method preserving the integrals. Primarily, we focus our investigations on the processes of a two-component light bullets generation. We demonstrate that the generation of a coupled pair is possible in a planar waveguide even at normal group velocity dispersion. [ABSTRACT FROM AUTHOR]

Data from clinical trials investigating on-demand medication often consist of an intentionally varying number of measurements per patient. These measurements are often observations of discrete events of when the medication was taken, including for example data on symptom severity. In addition to the varying number of observations between patients, the data have another important feature: they are characterized by a hierarchical structure in which the events are nested within patients. Traditionally, the observed events of patients are aggregated into means and subsequently analyzed using, for example, a repeated measures ANOVA. This procedure has drawbacks. One drawback is that these patient means have different standard errors, first, because the variance of the underlying events differs between patients and second, because the number of events per patient differs. In this paper, we argue that such data should be analyzed by applying a multilevel analysis using the individual observed events as separate nested observations. Such a multilevel approach handles this drawback and it also enables the examination of varying drug effects across patients by estimating random effects. We show how multilevel analyses can be applied to on-demand medication data from a clinical trial investigating the efficacy of a drug for women with low sexual desire. We also explore linear and quadratic time effects that can only be performed when the individual events are considered as separate observations and we discuss several important statistical topics relevant for multilevel modeling. Taken together, the use of a multilevel approach considering events as nested observations in these types of data is advocated as it is more valid and provides more information than other (traditional) methods. [ABSTRACT FROM AUTHOR]

Shape Up Under 5 (SUU5) was a two-year early childhood obesity prevention pilot study in Somerville, Massachusetts (2015–2017) designed to test a novel conceptual framework called Stakeholder-driven Community Diffusion. For whole-of-community interventions, this framework posits that diffusion of stakeholders’ knowledge about and engagement with childhood obesity prevention efforts through their social networks will improve the implementation of health-promoting policy and practice changes intended to reduce obesity risk. SUU5 used systems science methods (agent-based modeling, group model building, social network analysis) to design, facilitate, and evaluate the work of 16 multisector stakeholders (‘the Committee’). In this paper, we describe the design and methods of SUU5 using the conceptual framework: the approach to data collection, and methods and rationale for study inputs, activities and evaluation, which together may further our understanding of the hypothesized processes within Stakeholder-driven Community Diffusion. We also present a generalizable conceptual framework for addressing childhood obesity and similar complex public health issues through whole-of-community interventions. [ABSTRACT FROM AUTHOR]

Background: Dementia is a complex disorder characterized by poor outcomes for the patients and high costs of care. After decades of research little is known about its mechanisms. Having prognostic estimates about dementia can help researchers, patients and public entities in dealing with this disorder. Thus, health data, machine learning and microsimulation techniques could be employed in developing prognostic estimates for dementia. Objective: The goal of this paper is to present evidence on the state of the art of studies investigating and the prognosis of dementia using machine learning and microsimulation techniques. Method: To achieve our goal we carried out a systematic literature review, in which three large databases—Pubmed, Socups and Web of Science were searched to select studies that employed machine learning or microsimulation techniques for the prognosis of dementia. A single backward snowballing was done to identify further studies. A quality checklist was also employed to assess the quality of the evidence presented by the selected studies, and low quality studies were removed. Finally, data from the final set of studies were extracted in summary tables. Results: In total 37 papers were included. The data summary results showed that the current research is focused on the investigation of the patients with mild cognitive impairment that will evolve to Alzheimer’s disease, using machine learning techniques. Microsimulation studies were concerned with cost estimation and had a populational focus. Neuroimaging was the most commonly used variable. Conclusions: Prediction of conversion from MCI to AD is the dominant theme in the selected studies. Most studies used ML techniques on Neuroimaging data. Only a few data sources have been recruited by most studies and the ADNI database is the one most commonly used. Only two studies have investigated the prediction of epidemiological aspects of Dementia using either ML or MS techniques. Finally, care should be taken when interpreting the reported accuracy of ML techniques, given studies’ different contexts. [ABSTRACT FROM AUTHOR]

Nearly 1% of the global population has Epilepsy. Forecasting epileptic seizures with an acceptable confidence level, could improve the disease treatment and thus the lifestyle of the people who suffer it. To do that the electroencephalogram (EEG) signal is usually studied through spectral power band filtering, but this paper proposes an alternative novel method of preprocessing the EEG signal based on supervised filters. Such filters have been employed in a machine learning algorithm, such as the K-Nearest Neighbor (KNN), to improve the prediction of seizures. The proposed solution extends with this novel approach an algorithm that was submitted to win the third prize of an international Data Science challenge promoted by Kaggle contest platform and the American Epilepsy Society, the Epilepsy Foundation, National Institutes of Health (NIH) and Mayo Clinic. A formal description of these preprocessing methods is presented and a detailed analysis in terms of Receiver Operating Characteristics (ROC) curve and Area Under ROC curve is performed. The obtained results show statistical significant improvements when compared with the spectral power band filtering (PBF) typical baseline. A trend between performance and the dataset size is observed, suggesting that the supervised filters bring better information, compared to the conventional PBF filters, as the dataset grows in terms of monitored variables (sensors) and time length. The paper demonstrates a better accuracy in forecasting when new filters are employed and its main contribution is in the field of machine learning algorithms to develop more accurate predictive systems. [ABSTRACT FROM AUTHOR]

B-spline functions are widely used in many industrial applications such as computer graphic representations, computer aided design, computer aided manufacturing, computer numerical control, etc. Recently, there exist some demands, e.g. in reverse engineering (RE) area, to employ B-spline curves for non-trivial cases that include curves with discontinuous points, cusps or turning points from the sampled data. The most challenging task in these cases is in the identification of the number of knots and their respective locations in non-uniform space in the most efficient computational cost. This paper presents a new strategy for fitting any forms of curve by B-spline functions via local algorithm. A new two-step method for fast knot calculation is proposed. In the first step, the data is split using a bisecting method with predetermined allowable error to obtain coarse knots. Secondly, the knots are optimized, for both locations and continuity levels, by employing a non-linear least squares technique. The B-spline function is, therefore, obtained by solving the ordinary least squares problem. The performance of the proposed method is validated by using various numerical experimental data, with and without simulated noise, which were generated by a B-spline function and deterministic parametric functions. This paper also discusses the benchmarking of the proposed method to the existing methods in literature. The proposed method is shown to be able to reconstruct B-spline functions from sampled data within acceptable tolerance. It is also shown that, the proposed method can be applied for fitting any types of curves ranging from smooth ones to discontinuous ones. In addition, the method does not require excessive computational cost, which allows it to be used in automatic reverse engineering applications. [ABSTRACT FROM AUTHOR]

ICD-10(International Classification of Diseases 10th revision) is a classification of a disease, symptom, procedure, or injury. Diseases are often described in patients’ medical records with free texts, such as terms, phrases and paraphrases, which differ significantly from those used in ICD-10 classification. This paper presents an improved approach based on the Longest Common Subsequence (LCS) and semantic similarity for automatic Chinese diagnoses, mapping from the disease names given by clinician to the disease names in ICD-10. LCS refers to the longest string that is a subsequence of every member of a given set of strings. The proposed method of improved LCS in this paper can increase the accuracy of processing in Chinese disease mapping. [ABSTRACT FROM AUTHOR]

Among Parkinson’s disease (PD) symptoms, freezing of gait (FoG) is one of the most debilitating. To assess FoG, current clinical practice mostly employs repeated evaluations over weeks and months based on questionnaires, which may not accurately map the severity of this symptom. The use of a non-invasive system to monitor the activities of daily living (ADL) and the PD symptoms experienced by patients throughout the day could provide a more accurate and objective evaluation of FoG in order to better understand the evolution of the disease and allow for a more informed decision-making process in making adjustments to the patient’s treatment plan. This paper presents a new algorithm to detect FoG with a machine learning approach based on Support Vector Machines (SVM) and a single tri-axial accelerometer worn at the waist. The method is evaluated through the acceleration signals in an outpatient setting gathered from 21 PD patients at their home and evaluated under two different conditions: first, a generic model is tested by using a leave-one-out approach and, second, a personalised model that also uses part of the dataset from each patient. Results show a significant improvement in the accuracy of the personalised model compared to the generic model, showing enhancement in the specificity and sensitivity geometric mean (GM) of 7.2%. Furthermore, the SVM approach adopted has been compared to the most comprehensive FoG detection method currently in use (referred to as MBFA in this paper). Results of our novel generic method provide an enhancement of 11.2% in the GM compared to the MBFA generic model and, in the case of the personalised model, a 10% of improvement with respect to the MBFA personalised model. Thus, our results show that a machine learning approach can be used to monitor FoG during the daily life of PD patients and, furthermore, personalised models for FoG detection can be used to improve monitoring accuracy. [ABSTRACT FROM AUTHOR]

Increasingly, scholarly articles contain URI references to “web at large” resources including project web sites, scholarly wikis, ontologies, online debates, presentations, blogs, and videos. Authors reference such resources to provide essential context for the research they report on. A reader who visits a web at large resource by following a URI reference in an article, some time after its publication, is led to believe that the resource’s content is representative of what the author originally referenced. However, due to the dynamic nature of the web, that may very well not be the case. We reuse a dataset from a previous study in which several authors of this paper were involved, and investigate to what extent the textual content of web at large resources referenced in a vast collection of Science, Technology, and Medicine (STM) articles published between 1997 and 2012 has remained stable since the publication of the referencing article. We do so in a two-step approach that relies on various well-established similarity measures to compare textual content. In a first step, we use 19 web archives to find snapshots of referenced web at large resources that have textual content that is representative of the state of the resource around the time of publication of the referencing paper. We find that representative snapshots exist for about 30% of all URI references. In a second step, we compare the textual content of representative snapshots with that of their live web counterparts. We find that for over 75% of references the content has drifted away from what it was when referenced. These results raise significant concerns regarding the long term integrity of the web-based scholarly record and call for the deployment of techniques to combat these problems. [ABSTRACT FROM AUTHOR]

For ensemble learning, how to select and combine the candidate classifiers are two key issues which influence the performance of the ensemble system dramatically. Random vector functional link networks (RVFL) without direct input-to-output links is one of suitable base-classifiers for ensemble systems because of its fast learning speed, simple structure and good generalization performance. In this paper, to obtain a more compact ensemble system with improved convergence performance, an improved ensemble of RVFL based on attractive and repulsive particle swarm optimization (ARPSO) with double optimization strategy is proposed. In the proposed method, ARPSO is applied to select and combine the candidate RVFL. As for using ARPSO to select the optimal base RVFL, ARPSO considers both the convergence accuracy on the validation data and the diversity of the candidate ensemble system to build the RVFL ensembles. In the process of combining RVFL, the ensemble weights corresponding to the base RVFL are initialized by the minimum norm least-square method and then further optimized by ARPSO. Finally, a few redundant RVFL is pruned, and thus the more compact ensemble of RVFL is obtained. Moreover, in this paper, theoretical analysis and justification on how to prune the base classifiers on classification problem is presented, and a simple and practically feasible strategy for pruning redundant base classifiers on both classification and regression problems is proposed. Since the double optimization is performed on the basis of the single optimization, the ensemble of RVFL built by the proposed method outperforms that built by some single optimization methods. Experiment results on function approximation and classification problems verify that the proposed method could improve its convergence accuracy as well as reduce the complexity of the ensemble system. [ABSTRACT FROM AUTHOR]

This paper proposes a method to predict fluctuations in the prices of cryptocurrencies, which are increasingly used for online transactions worldwide. Little research has been conducted on predicting fluctuations in the price and number of transactions of a variety of cryptocurrencies. Moreover, the few methods proposed to predict fluctuation in currency prices are inefficient because they fail to take into account the differences in attributes between real currencies and cryptocurrencies. This paper analyzes user comments in online cryptocurrency communities to predict fluctuations in the prices of cryptocurrencies and the number of transactions. By focusing on three cryptocurrencies, each with a large market size and user base, this paper attempts to predict such fluctuations by using a simple and efficient method. [ABSTRACT FROM AUTHOR]

We investigate the use of Twitter data to deliver signals for syndromic surveillance in order to assess its ability to augment existing syndromic surveillance efforts and give a better understanding of symptomatic people who do not seek healthcare advice directly. We focus on a specific syndrome—asthma/difficulty breathing. We outline data collection using the Twitter streaming API as well as analysis and pre-processing of the collected data. Even with keyword-based data collection, many of the tweets collected are not be relevant because they represent chatter, or talk of awareness instead of an individual suffering a particular condition. In light of this, we set out to identify relevant tweets to collect a strong and reliable signal. For this, we investigate text classification techniques, and in particular we focus on semi-supervised classification techniques since they enable us to use more of the Twitter data collected while only doing very minimal labelling. In this paper, we propose a semi-supervised approach to symptomatic tweet classification and relevance filtering. We also propose alternative techniques to popular deep learning approaches. Additionally, we highlight the use of emojis and other special features capturing the tweet’s tone to improve the classification performance. Our results show that negative emojis and those that denote laughter provide the best classification performance in conjunction with a simple word-level n-gram approach. We obtain good performance in classifying symptomatic tweets with both supervised and semi-supervised algorithms and found that the proposed semi-supervised algorithms preserve more of the relevant tweets and may be advantageous in the context of a weak signal. Finally, we found some correlation (r = 0.414, p = 0.0004) between the Twitter signal generated with the semi-supervised system and data from consultations for related health conditions. [ABSTRACT FROM AUTHOR]

Motivation: Disease progression originates from the concept that an individual disease may go through different changes as it evolves, and such changes can cause new diseases. It is important to find a progression between diseases since knowing the prior-posterior relationship beforehand can prevent further complications or evolutions to other diseases. Furthermore, the series of progressions can be represented in the form of a chain, which enables us to readily infer successive influences from one disease to another after many passages through other diseases. Methods: In this paper, we propose a systematic approach for finding a disease progression chain from a source disease to a target one via exploring a disease network. The network is constructed based on various sets of biomedical data. To find the most influential progression chains, the k-shortest path search algorithm is employed. The most representative algorithms such as A*, Dijkstra, and Yen’s are incorporated into the proposed method. Results: A disease network consisting of 3,302 diseases was constructed based on four sources of biomedical data: disease-protein relations, biological pathways, clinical history, and biomedical literature information. The last three sets of data contain prior-posterior information, and they endow directionality on the edges of the network. The results were interesting and informative: for example, when colitis and respiratory insufficiency were set as a source disease and a target one, respectively, five progression chains were found within several seconds (when k = 5). Each chain was provided with a progression score, which indicates the strength of plausibility relative to others. Similarly, the proposed method can be expanded to any pair of source-target diseases in the network. This can be utilized as a preliminary tool for inferring complications or progressions between diseases. [ABSTRACT FROM AUTHOR]

Background: System science approaches are increasingly used to explore complex public health problems. Quantitative methods, such as participatory dynamic simulation modelling, can mobilise knowledge to inform health policy decisions. However, the analytic and practical steps required to turn collaboratively developed, qualitative system maps into rigorous and policy-relevant quantified dynamic simulation models are not well described. This paper reports on the processes, interactions and decisions that occurred at the interface between modellers and end-user participants in an applied health sector case study focusing on diabetes in pregnancy. Methods: An analysis was conducted using qualitative data from a participatory dynamic simulation modelling case study in an Australian health policy setting. Recordings of participatory model development workshops and subsequent meetings were analysed and triangulated with field notes and other written records of discussions and decisions. Case study vignettes were collated to illustrate the deliberations and decisions made throughout the model development process. Results: The key analytic objectives and decision-making processes included: defining the model scope; analysing and refining the model structure to maximise local relevance and utility; reviewing and incorporating evidence to inform model parameters and assumptions; focusing the model on priority policy questions; communicating results and applying the models to policy processes. These stages did not occur sequentially; the model development was cyclical and iterative with decisions being re-visited and refined throughout the process. Storytelling was an effective strategy to both communicate and resolve concerns about the model logic and structure, and to communicate the outputs of the model to a broader audience. Conclusion: The in-depth analysis reported here examined the application of participatory modelling methods to move beyond qualitative conceptual mapping to the development of a rigorously quantified and policy relevant, complex dynamic simulation model. The analytic objectives and decision-making themes identified provide guidance for interpreting, understanding and reporting future participatory modelling projects and methods. [ABSTRACT FROM AUTHOR]

A brain-computer interface (BCI), based on motor imagery EEG, uses information extracted from the electroencephalography signals generated by a person who intends to perform any action. One of the most important issues of current research is how to detect automatically whether the user intends to send some message to a certain device. This study presents a proposal, based on a hierarchical structured system, for recognising intentional and non-intentional mental tasks on a BCI system by applying machine learning techniques to the EEG signals. First-level clustering is performed to distinguish between intentional control (IC) and non-intentional control (NC) state patterns. Then, the patterns recognised as IC are passed on to a second stage where supervised learning techniques are used to classify them. In BCI applications, it is critical to correctly classify NC states with a low false positive rate (FPR) to avoid undesirable effects. According to the literature, we selected a maximum FPR of 10%. Under these conditions, our proposal achieved an average test accuracy of 66.6%, with an 8.2% FPR, for the BCI competition IIIa dataset. The main contribution of this paper is the hierarchical approach, based on machine learning paradigms, which performs intentional and non-intentional discrimination and, depending on the case, classifies the intended command selected by the user. [ABSTRACT FROM AUTHOR]

The carrying pole has existed as a load carrying tool for thousands of years and is still popular in many parts of Asia. Previous studies attempted to determine whether the elasticity of the carrying pole is energetically beneficial compared with other load carrying methods. However, conflicting results indicate that the effects of the carrying pole stiffness on the carrier are still unclear. The carrying pole exhibits more complex characteristics beyond stiffness, which invites further investigation. As the first step towards the goal, this paper explores the underlying mechanics of the carrying pole, including the structural and dynamic properties, to determine its impact on the carrier. The structure of the carrying pole is modeled and characterized by pole length, pole stiffness, and length of suspension rope. We argue that maintaining the pole’s balance should be a major prerequisite during load carriage and that active feedback control from the carrier is required. Simulations reveal that the structural parameters of the pole have significant influences on the pole’s balance and the interaction between the pole and the carrier. This work suggests mechanical characteristics of the carrying pole can potentially have an extensive impact on gait mechanics and energetics of the carrier. [ABSTRACT FROM AUTHOR]

With the prosperity of machine learning and cloud computing, meaningful information can be mined from mass electronic medical data which help physicians make proper disease diagnosis for patients. However, using medical data and disease information of patients frequently raise privacy concerns. In this paper, based on single-layer perceptron, we propose a scheme of privacy-preserving clinical decision with cloud support (PPCD), which securely conducts disease model training and prediction for the patient. Each party learns nothing about the other’s private information. In PPCD, a lightweight secure multiplication is presented and introduced to improve the model training. Security analysis and experimental results on real data confirm the high accuracy of disease prediction achieved by the proposed PPCD without the risk of privacy disclosure. [ABSTRACT FROM AUTHOR]

Diabetic retinopathy is a complication of diabetes that produces changes in the blood vessel structure in the retina, which can cause severe vision problems and even blindness. In this paper, we demonstrate that by identifying topological features in very high resolution retinal images, we can construct a classifier that discriminates between healthy patients and those with diabetic retinopathy using summary statistics of these features. Topological data analysis identifies the features as connected components and holes in the images and describes the extent to which they persist across the image. These features are encoded in persistence diagrams, summaries of which can be used to discrimate between diabetic and healthy patients. The method has the potential to be an effective automated screening tool, with high sensitivity and specificity. [ABSTRACT FROM AUTHOR]

Electroencephalogram (EEG) is a common base signal used to monitor brain activities and diagnose sleep disorders. Manual sleep stage scoring is a time-consuming task for sleep experts and is limited by inter-rater reliability. In this paper, we propose an automatic sleep stage annotation method called SleepEEGNet using a single-channel EEG signal. The SleepEEGNet is composed of deep convolutional neural networks (CNNs) to extract time-invariant features, frequency information, and a sequence to sequence model to capture the complex and long short-term context dependencies between sleep epochs and scores. In addition, to reduce the effect of the class imbalance problem presented in the available sleep datasets, we applied novel loss functions to have an equal misclassified error for each sleep stage while training the network. We evaluated the performance of the proposed method on different single-EEG channels (i.e., Fpz-Cz and Pz-Oz EEG channels) from the Physionet Sleep-EDF datasets published in 2013 and 2018. The evaluation results demonstrate that the proposed method achieved the best annotation performance compared to current literature, with an overall accuracy of 84.26%, a macro F1-score of 79.66% and κ = 0.79. Our developed model can be applied to other sleep EEG signals and aid the sleep specialists to arrive at an accurate diagnosis. The source code is available at . [ABSTRACT FROM AUTHOR]

Control problem in a biological system is the problem of finding an interventional policy for changing the state of the biological system from an undesirable state, e.g. disease, into a desirable healthy state. Boolean networks are utilized as a mathematical model for gene regulatory networks. This paper provides an algorithm to solve the control problem in Boolean networks. The proposed algorithm is implemented and applied on two biological systems: T-cell receptor network and Drosophila melanogaster network. Results show that the proposed algorithm works faster in solving the control problem over these networks, while having similar accuracy, in comparison to previous exact methods. Source code and a simple web service of the proposed algorithm is available at . [ABSTRACT FROM AUTHOR]

Antenna selection in Multiple-Input Multiple-Output (MIMO) systems has attracted increasing attention due to the challenge of keeping a balance between communication performance and computational complexity. Recently, deep learning based methods have achieved promising performance in many application fields. This paper proposed a deep learning (DL) based antenna selection technique. First, we generated the label of training antenna systems by maximizing the channel capacity. Then, we adopted the deep convolutional neural network (CNN) on the channel matrices to explicitly exploit the massive latent cues of attenuation coefficients. Finally, we used the adopted CNN to assign the class label and then select the optimal antenna subset. Experimental results demonstrate that our method can achieve better performance than the state-of-the-art baselines for data-driven based antenna selection. [ABSTRACT FROM AUTHOR]

Due to continuous evolution of biomedical data, biomedical ontologies are becoming larger and more complex, which leads to the existence of many overlapping information. To support semantic inter-operability between ontology-based biomedical systems, it is necessary to identify the correspondences between these information, which is commonly known as biomedical ontology matching. However, it is a challenge to match biomedical ontologies, which dues to: (1) biomedical ontologies often possess tens of thousands of entities, (2) biomedical terminologies are complex and ambiguous. To efficiently match biomedical ontologies, in this paper, an interactive biomedical ontology matching approach is proposed, which utilizes the Evolutionary Algorithm (EA) to implement the automatic matching process, and gets a user involved in the evolving process to improve the matching efficiency. In particular, we propose an Evolutionary Tabu Search (ETS) algorithm, which can improve EA’s performance by introducing the tabu search algorithm as a local search strategy into the evolving process. On this basis, we further make the ETS-based ontology matching technique cooperate with the user in a reasonable amount of time to efficiently create high quality alignments, and make use of EA’s survival of the fittest to eliminate the wrong correspondences brought by erroneous user validations. The experiment is conducted on the Anatomy track and Large Biomedic track that are provided by the Ontology Alignment Evaluation Initiative (OAEI), and the experimental results show that our approach is able to efficiently exploit the user intervention to improve its non-interactive version, and the performance of our approach outperforms the state-of-the-art semi-automatic ontology matching systems. [ABSTRACT FROM AUTHOR]

In this paper, we put forward a real-time multiple GPUs (multi-GPU) accelerated virtual-reality interaction simulation framework where the reconstructed objects from camera images interact with virtual deformable objects. Firstly, based on an extended voxel-based visual hull (VbVH) algorithm, we design an image-based 3D reconstruction platform for real objects. Then, an improved hybrid deformation model, which couples the geometry constrained fast lattice shape matching method (FLSM) and total Lagrangian explicit dynamics (TLED) algorithm, is proposed to achieve efficient and stable simulation of the virtual objects’ elastic deformations. Finally, one-way virtual-reality interactions including soft tissues’ virtual cutting with bleeding effects are successfully simulated. Moreover, with the purpose of significantly improving the computational efficiency of each time step, we propose an entire multi-GPU implementation method of the framework using compute unified device architecture (CUDA). The experiment results demonstrate that our multi-GPU accelerated virtual-reality interaction framework achieves real-time performance under the moderate calculation scale, which is a new effective 3D interaction technique for virtual reality applications. [ABSTRACT FROM AUTHOR]