Search

The access of new energy improves the flexibility of distribution network operation, but also leads to more complex mechanism of line loss. Therefore, starting from the nonlinear, fluctuating and multi-scale characteristics of line loss data, and based on the idea of decomposition prediction, this paper proposes a new method of line loss frequency division prediction based on wavelet transform and BIGRU-LSTM (Bidirectional Gated Recurrent Unit-Long Short Term Memory Network).Firstly, the grey relation analysis and the improved NARMA (Nonlinear Autoregressive Moving Average) correlation analysis method are used to extract the non-temporal and temporal influencing factors of line loss, and the corresponding feature data set is constructed. Then, the historical line loss data is decomposed into physical signals of different frequency bands by using wavelet transform, and the multi-dimensional input data of the prediction network is formed with the above characteristic data set. Finally, the BIGRU-LSTM prediction network is built to realize the probabilistic prediction of high-frequency and low-frequency components of line loss. The effectiveness and applicability of the method proposed in this paper were verified through numerical simulation. By dividing the line loss data into different frequency bands for frequency prediction, the mapping relationship between different line loss components and influencing factors was accurately matched, thereby improving the prediction accuracy. [ABSTRACT FROM AUTHOR]

The “publish or perish” incentive drives many researchers to increase the quantity of their papers at the cost of quality. Lowering quality increases the number of false positive errors which is a key cause of the reproducibility crisis. We adapted a previously published simulation of the research world where labs that produce many papers are more likely to have “child” labs that inherit their characteristics. This selection creates a competitive spiral that favours quantity over quality. To try to halt the competitive spiral we added random audits that could detect and remove labs with a high proportion of false positives, and also improved the behaviour of “child” and “parent” labs who increased their effort and so lowered their probability of making a false positive error. Without auditing, only 0.2% of simulations did not experience the competitive spiral, defined by a convergence to the highest possible false positive probability. Auditing 1.35% of papers avoided the competitive spiral in 71% of simulations, and auditing 1.94% of papers in 95% of simulations. Audits worked best when they were only applied to established labs with 50 or more papers compared with labs with 25 or more papers. Adding a ±20% random error to the number of false positives to simulate peer reviewer error did not reduce the audits’ efficacy. The main benefit of the audits was via the increase in effort in “child” and “parent” labs. Audits improved the literature by reducing the number of false positives from 30.2 per 100 papers to 12.3 per 100 papers. Auditing 1.94% of papers would cost an estimated $15.9 million per year if applied to papers produced by National Institutes of Health funding. Our simulation greatly simplifies the research world and there are many unanswered questions about if and how audits would work that can only be addressed by a trial of an audit. [ABSTRACT FROM AUTHOR]

Channel coding technology plays an important role in wireless communication systems, and it serves as a crucial mechanism to reduce interference during the transmission process. As the fifth-generation (5G) and sixth-generation (6G) wireless communication systems rapidly advance, requirements of the users on the quality and security of wireless service are increasing. To solve these problems, it calls for us to explore the new channel coding technologies. In this paper, a linear feedback coding scheme for fading multiple-access channels with degraded message sets (FMAC-DMS) is proposed. In this scheme, the transmitting beamforming and channel splitting are used to transform the channel with complex signals into scalar equivalent sub-channels. Then, the extended Schalkwijk-Kailath coding scheme (SK) is further applied to each sub-channel. The channel capacity, finite blocklength (FBL) sum-rate and FBL secrecy achievable sum-rate of the FMAC-DMS in single-input single-output (SISO) and multi-input single-output (MISO) cases are derived. Finally, we show that the proposed scheme not only provides a FBL coding solution but also guarantees physical layer security(PLS). The numerical and simulation results show the effectiveness of the proposed scheme as a channel coding solution. The study of this paper provides a new method to construct a practical FBL scheme for the FMAC-DMS. [ABSTRACT FROM AUTHOR]

The one-sample log-rank test is the preferred method for analysing the outcome of single-arm survival trials. It compares the survival distribution of patients with a prefixed reference survival curve that usually represents the expected outcome under standard of care. However, classical one-sample log-rank tests assume that the reference curve is known, ignoring that it is frequently estimated from historical data and therefore susceptible to sampling error. Neglecting the variability of the reference curve can lead to an inflated type I error rate, as shown in a previous paper. Here, we propose a new survival test that allows to account for the sampling error of the reference curve without knowledge of the full underlying historical survival time data. Our new test allows to perform a valid historical comparison of patient survival times when only a historical survival curve rather than the full historic data is available. It thus applies in settings where the two-sample log-rank test is not applicable as method of choice due to non-availability of historic individual patient survival time data. We develop sample size calculation formulas, give an example application and study the performance of the new test in a simulation study., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Feld et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In this paper we consider a special kind of semicontinous distribution. We try to concern with the situation where the probability of zero observation is associated with the location and scale parameters in lognormal distribution. We first propose a goodness-of-fit test to ensure that the data can be fit by the associated delta-lognormal distribution. Then we define the updated fiducial distributions of the parameters and establish the results that the confidence interval has asymtotically correct level while the significance level of the hypothesis testing is also asymtotically correct. We propose an exact sampling method to sample from the updated fiducial distribution. It can be seen in our simulation study that the inference on the parameters is largely improved. A real data example is also used to illustrate our method., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Wang, Xu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In order to investigate the development of the temperature field of a new type of freezing reinforcement under seepage conditions, in this paper, COMSOL finite element software was used to simplify the model and simulate the effect of groundwater seepage on the development of the temperature field of frozen pipes by coupling the Darcy's law module and the heat transfer module for porous media. The heads of water were also varied to simulate the change in seepage velocity to further investigate the effect of seepage velocity on the temperature field. The results of the study show that the freezing wall formed in the high head region was thinner than that in the low head region due to the effect of seepage, and this phenomenon was aggravated with the increase of seepage rate; The effect of seepage action on the temperature field had a hysteresis along the seepage direction; When the seepage rate was greater than 1.65 m/d, the soil in the center of the device feezed better and could form a tight and dense freezing wall comparable to the size of the freezing device; When the seepage rate was greater than 5.78 m/d, the temperature of the center soil body gradually increased, and eventually the freezing curtain cannot be formed., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Yang et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Tissue engineering predominantly relies on trial and error in vitro and ex vivo experiments to develop protocols and bioreactors to generate functional tissues. As an alternative, in silico methods have the potential to significantly reduce the timelines and costs of experimental programs for tissue engineering. In this paper, we propose a methodology to formulate, select, calibrate, and test mathematical models to predict cell population growth as a function of the biochemical environment and to design optimal experimental protocols for model inference of in silico model parameters. We systematically combine methods from the experimental design, mathematical statistics, and optimization literature to develop unique and explainable mathematical models for cell population dynamics. The proposed methodology is applied to the development of this first published model for a population of the airway-relevant bronchio-alveolar epithelial (BEAS-2B) cell line as a function of the concentration of metabolic-related biochemical substrates. The resulting model is a system of ordinary differential equations that predict the temporal dynamics of BEAS-2B cell populations as a function of the initial seeded cell population and the glucose, oxygen, and lactate concentrations in the growth media, using seven parameters rigorously inferred from optimally designed in vitro experiments., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Mostofinejad et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Electric machines emulators (EMEs) based on hardware-in-the-loop (HIL), which effectively act as emulators to mimic the actual motor behavior of Interior Permanent Magnet (IPM) machines. EME is frequently used to evaluate motor controller and motor control methodologies prior to development. The inverse magnetization motor model, which is used as the basis for real-time simulation in this paper's proposal for an electric machine emulator system based on HIL, uses FEA to create the motor model data. The nonlinear features of the motor may be successfully replicated with this motor model, and the accuracy of the electric machine emulator can be enhanced by using a straightforward and trustworthy motor controller. The real-time simulation tool typhoon HIL is used in the study to develop a hardware-in-the-loop simulation platform for an IPM electric machines emulator., Competing Interests: Enter: The authors have declared that no competing interests exist., (Copyright: © 2024 Guo et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

From the facts that numerous regions with initially similar economic conditions end up with different levels of entrepreneurial agglomeration, this paper constructs a model assuming that the sequential entrants make their career choices based on existing entrepreneurial ratio and describing the dynamics of entrepreneurial agglomeration formation. After mathematical analysis and numerical simulation using NetLogo, it is found that under social selection, a nonlinear Polya process with self-reinforcing and path-dependency characters will emerge, and the repeated entrants' career choices will lead to the agglomeration of entrepreneurship; the agent's risk compensation value, the initial population of agents, the number of role models in the early stage and the initial entrepreneurial ratio are determinants to the formation of entrepreneurial agglomeration. The findings confirm that entrepreneurship has "memory" and the entrepreneurial history could have influence on the future. In order to forge the entrepreneurial agglomeration, our suggestions include exerting influence on the determinants from an early age, and improving the individual's risk-taking abilities. [ABSTRACT FROM AUTHOR]

As a basic parameter of rock, the rock bridge angle plays an important role in maintaining the stability of rock masses. To study the size effect of rock bridge angle on the uniaxial compressive strength of rocks, this paper adopts the principle of regression analysis and combines numerical simulation to carry out relevant research. The research results indicate that: (1) the uniaxial compressive strength decreases with the increase of the rock bridge angle, showing a power function relationship; (2) The uniaxial compressive strength decreases with the increase of rock size and tends to stabilize when the rock size is greater than 350 mm, showing a significant size effect. (3) The fluctuation coefficient of compressive strength increases with the increase of rock bridge angle and decreases with the increase of rock size; When the rock size is 350 mm, the fluctuation coefficient is less than 5%; (4) The characteristic compressive strength and characteristic size both increase with the increase of the rock bridge angle. [ABSTRACT FROM AUTHOR]

This paper focuses on studying the optimization problem of multi-agent systems (MAS) under undirected graph. To reduce the communication frequency among agents, a zero-gradient-sum (ZGS) algorithm based on dynamic event-triggered (DET) mechanism is investigated. The event-triggered condition of each agent only uses its own state information and the neighbor's state information at the previous triggering instants, without requiring continuous state information from the neighbor. In addition, the designed algorithm allows for the sampling period to be arbitrarily large. The Lyapunov method is utilized to derive the sufficient conditions that incorporate time delay and parameters. As the event is only checked at the periodic moment, zeno behavior can be directly excluded. Finally, numerical simulations demonstrate the effectiveness of the theoretical results. [ABSTRACT FROM AUTHOR]

In this study, we employed the principle of Relative Mode Transfer Method (RMTM) to establish a model for a single pendulum subjected to sudden changes in its length. An experimental platform for image processing was constructed to accurately track the position of a moving ball, enabling experimental verification of the pendulum's motion under specific operating conditions. The experimental data demonstrated excellent agreement with simulated numerical results, validating the effectiveness of the proposed methodology. Furthermore, we performed simulations of a double obstacle pendulum system, investigating the effects of different parameters, including obstacle pin positions, quantities, and initial release angles, on the pendulum's motion through numerical simulations. This research provides novel insights into addressing the challenges associated with abrupt and continuous changes in pendulum length. [ABSTRACT FROM AUTHOR]

The stochastic nonlinear Schrödinger model (SNLSM) in (1+1)-dimension with random potential is examined in this paper. The analysis of the evolution of nonlinear dispersive waves in a totally disordered medium depends heavily on the model under investigation. This study has three main objectives. Firstly, for the SNLSM, derive stochastic precise solutions by using the modified Sardar sub-equation technique. This technique is efficient and intuitive for solving such models, as shown by the generated solutions, which can be described as trigonometric, hyperbolic, bright, single and dark. Secondly, for obtaining numerical solutions to the SNLSM, the algorithms described here offer an accurate and efficient technique. Lastly, investigate the phase plane analysis of the perturbed and unperturbed dynamical system and the time series analysis of the governing model. The results show that the numerical and analytical techniques can be extended to solve other nonlinear partial differential equations in physics and engineering. The results of this study have a significant impact on how well we comprehend how solitons behave in physical systems. Additionally, they may serve as a foundation for the development of improved numerical techniques for handling challenging nonlinear partial differential equations. [ABSTRACT FROM AUTHOR]

Blockchain has been applied to quality control in manufacturing, but the problems of false defect detections and lack of data transparency remain. This paper proposes a framework, Blockchain Quality Controller (BCQC), to overcome these limitations while fortifying data security. BCQC utilizes blockchain and Internet-of-Things to form a peer-to-peer supervision network. This paper also proposes a consensus algorithm, Quality Defect Tolerance (QDT), to adopt blockchain for during-production quality control. Simulation results show that BCQC enhances data security and improves defect detections. Although the time taken for the quality control process increases with the number of nodes in blockchain, the application of QDT allows multiple inspections on a workpiece to be consolidated at a faster pace, effectively speeding up the entire quality control process. The BCQC and QDT can improve the quality of parts produced for mass personalization manufacturing. [ABSTRACT FROM AUTHOR]

In this paper, to achieve circular-to-linear polarization conversion, a novel polarization converter based on an anisotropic metasurface is proposed. Because the polarization converter is an orthotropic anisotropic structure with a pair of mutually perpendicular symmetric axes u and v, theoretical analysis shows that the polarization converter can achieve circular-to-linear polarization conversion if its reflection phase difference Δφuv under u-polarized and v-polarized incidences is close to ±90°. Numerical simulations show that the reflection phase difference Δφuv of the polarization converter is very close to +90° in two separated frequency ranges, so the polarization converter can achieve high-efficiency and dual-band CP-to-LP polarization conversion, it can convert right-handed circular-polarized (RHCP) and left-handed circular-polarized (LHCP) waves into y-polarized and x-polarized waves respectively in the two separated frequency bands of 8.08–9.27 GHz and 13.80–27.11 GHz; moreover, its polarization conversion rate (PCR) is kept larger than 99.7% in the two frequency bands. Finally, to validate the design, a prototype is manufactured and measured, the measured results are in good agreement with the simulated ones. [ABSTRACT FROM AUTHOR]

The AIDS is a chronic disease and the researchers still exert their high efforts to reach the cure of HIV infection. The most common treatment is the antiretroviral therapy (cART) and the virus can be more effected if the patients stop using cART. The other problem is that the CD8+ T cells might be exhausted by persistent immune activation by cART. This paper introduces fractional-order into a mathematical model of HIV infection combining with stem cell therapy and control the infection by the immune system cells (CD8+ T cells). The paper introduced the numerical solutions for the mathematical model. The results show that the stem cell therapy with the activation of immune system cells might causes the cure for a HIV patient. This results are consistent with medical studies. Also, we proposed the effect of the fractional order (α) on the figures of the components. [ABSTRACT FROM AUTHOR]

High primary rock stress can limit the generation of rock cracks caused by blasting, and blasting usually shows different rock breaking states under different primary rock stress conditions. There are a large number of naturally formed joints in rock mass, due to the limitations of laboratory tests, a numerical model of jointed rock mass was established using LS-DYNA software to investigate the evolution of blasting damage under various in-situ stresses and open joints. In this simulation, using the Lagrange-Euler (ALE) procedure and the equation of state (JWL) that defines explosive materials, the study considered different joint thicknesses (2cm, 4cm, and 6cm), joint angles (0°, 30°, 60°, and 90°), and in-situ stress conditions (lateral stress coefficients of 0.5, 1, and 2, with vertical in-situ stresses of 10MPa and 20MPa), through stress analysis and damage area comparison, the relationship between damage crack propagation and horizontal and vertical stress difference is explored. The research aimed to understand the mechanisms underlying crack initiation and propagation. The results show that: (1) The presence of joints exerts a barrier effect on the expansion and penetration of cracks. When explosion stress waves reach the joint surface, their propagation is impeded, leading to the diffusion of wing cracks at the joint ends. When the lateral stress coefficient and joint angle are the same, an increase in initial in-situ stress results in a reduction in the area of the blasting damage zone. (2) Under the same initial in-situ stress conditions, the area of the blasting damage zone initially increases and then decreases with an increasing joint angle. However, it remains larger than that without a joint, and there exists an optimal angle that maximizes the damage area. In the simulated conditions, the area of damage cracks is greatest when the joint angle is 60° dip angle. (3) The presence of initial in-situ stress has a certain impact on the initiation and expansion of blasting cracks. The degree and nature of this influence are not solely related to the lateral stress coefficient but also depend on the joint's angle and thickness. When in-situ stress is present, the initial in-situ stress field's pressure is not conducive to the initiation and propagation of blasting cracks. However, the existence of a joint has a noticeable guiding and promoting effect on crack propagation, and the pattern of crack propagation is influenced by both joint and in-situ stress conditions. [ABSTRACT FROM AUTHOR]

HIV/AIDS and COVID-19 co-infection is a common global health and socio-economic problem. In this paper, a mathematical model for the transmission dynamics of HIV/AIDS and COVID-19 co-infection that incorporates protection and treatment for the infected (and infectious) groups is formulated and analyzed. Firstly, we proved the non-negativity and boundedness of the co-infection model solutions, analyzed the single infection models steady states, calculated the basic reproduction numbers using next generation matrix approach and then investigated the existence and local stabilities of equilibriums using Routh-Hurwiz stability criteria. Then using the Center Manifold criteria to investigate the proposed model exhibited the phenomenon of backward bifurcation whenever its effective reproduction number is less than unity. Secondly, we incorporate time dependent optimal control strategies, using Pontryagin's Maximum Principle to derive necessary conditions for the optimal control of the disease. Finally, we carried out numerical simulations for both the deterministic model and the model incorporating optimal controls and we found the results that the model solutions are converging to the model endemic equilibrium point whenever the model effective reproduction number is greater than unity, and also from numerical simulations of the optimal control problem applying the combinations of all the possible protection and treatment strategies together is the most effective strategy to drastically minimizing the transmission of the HIV/AIDS and COVID-19 co-infection in the community under consideration of the study. [ABSTRACT FROM AUTHOR]

Due to the weak monitoring equipment for low- and medium-pressure gas pipelines, it is not easy to identify small flow leaks. The detection methods are mostly traditional manual inspections or night pressure-maintaining leak detection methods, which cannot be automatically monitored and sensed immediately. The abnormal fluctuations in client traffic caused by pipeline leaks studied in this paper can locate and detect leak locations more effectively. This paper analyzes the theoretical formula of leakage location based on flow data and finds out how to use the abnormal fluctuation of user-side flow to detect and locate gas pipeline leakage. First of all, this article uses the simulation software Pipeline Studio to construct the medium and low-pressure pipeline model. On this basis, 6 sets of leakage conditions were designed and simulated dynamically. Finally, the simulation results are analyzed, and the results show that: 1) The advisable monitoring period for monitoring abnormal fluctuations of user-side traffic is 10s. 2) There are two relationships between abnormal flow fluctuations and leakage position. They are: when the leakage point is at the first 40% of the relative distance from the gas source, the disturbance amplitude first increases and then decreases, and at the last 60%, it continues to decrease.; The closer the leak is to the user end, the more significant the abnormal flow fluctuations will be. On the contrary, the smaller the abnormal flow fluctuations will be; 3) No matter where the leakage occurs, the abnormal flow fluctuations in the 2nd and 3rd seconds after the leak occurs tend to be consistent. The proposal of the advisable monitoring period and the relationship between abnormal fluctuations of flow and the location of leakage provides a theoretical basis for the use of abnormal fluctuations of user-side flow for gas pipeline leakage detection and location., Competing Interests: The authors have declared that no competing interests exist.

This article deals with studying the dynamical behavior of the DNA model proposed by Peyrard and Bishop. The proposed model is investigated using the unified method (UM). Unified method successfully extracts solutions in the form of polynomial and rational functions. The solitary wave solutions and soliton solutions are constructed. An investigation of modulation instability is also presented in this paper. 3D and 2D plots are presented to exhibit the physical behavior of some of the obtained solutions. [ABSTRACT FROM AUTHOR]

The paper investigates a leader-following scheme for nonlinear multi-agent systems (MASs). The network of agents involves time-delay, unknown leader's states, external perturbations, and switching graph topologies. Two distributed protocols including a consensus protocol and an observer are utilized to reconstruct the unavailable states of the leader in a network of agents. The H∞-based stability conditions for estimation and consensus problems are obtained in the framework of linear-matrix inequalities (LMIs) and the Lyapunov-Krasovskii approach. It is ensured that each agent achieves the leader-following agreement asymptotically. Moreover, the robustness of the control policy concerning a gain perturbation is guaranteed. Simulation results are performed to assess the suggested schemes. It is shown that the suggested approach gives a remarkable accuracy in the consensus problem and leader's states estimation in the presence of time-varying gain perturbations, time-delay, switching topology and disturbances. The H∞ and LMIs conditions are well satisfied and the error trajectories are well converged to the origin., Competing Interests: The authors have declared that no competing interests exist.

Many real-world networks characterized by power-law degree distributions are extremely vulnerable against malicious attacks. Therefore, it is important to obtain effective methods for strengthening the robustness of the existing networks. Previous studies have been discussed some link addition methods for improving the robustness. In particular, two effective strategies for selecting nodes to add links have been proposed: the minimum degree and longest distance strategies. However, it is unclear whether the effects of these strategies on the robustness are independent or not. In this paper, we investigate the contributions of these strategies to improving the robustness by adding links in distinguishing the effects of degrees and distances as much as possible. Through numerical simulation, we find that the robustness is effectively improved by adding links on the minimum degree strategy for both synthetic trees and real networks. As an exception, only when the number of added links is small, the longest distance strategy is the best. Conversely, the robustness is only slightly improved by adding links on the shortest distance strategy in many cases, even combined with the minimum degree strategy. Therefore, enhancing global loops is essential for improving the robustness rather than local loops. [ABSTRACT FROM AUTHOR]

The Ising model does not have strictly defined dynamics, only a spectrum. There are different ways to equip it with time dependence, e.g., the Glauber or the Kawasaki dynamics, which are both stochastic, but it means there is a master equation that can also describe their dynamics. These equations can be derived from the Redfield equation, where the spin system is weakly coupled to a bosonic bath. In this paper, we investigate the temperature dependence of the relaxation time of a Glauber-type master equation, especially in the case of the fully connected, uniform Ising model. The finite-size effects were analyzed with a reduced master equation and the thermodynamic limit with a time-dependent mean field equation., Competing Interests: The authors have declared that no competing interests exist.

A Polymer Electrolytic Membrane Fuel Cell (PEMFC) is an efficient power device for automobiles, but its efficiency and life span depend upon its air delivery system. To ensure improved performance of PEMFC, the air delivery system must ensure proper regulation of Oxygen Excess Ratio (OER). This paper proposes two nonlinear control strategies, namely Integral Sliding Mode Control (ISMC) and Fast Terminal ISMC (FTISMC). Both the controllers are designed to control the OER at a constant level under load disturbances while avoiding oxygen starvation. The derived controllers are implemented in MATLAB/ Simulink. The corresponding simulation results depict that FTISMC has faster tracking performance and lesser fluctuations due to load disturbances in output net power, stack voltage/power, error tracking, OER, and compressor motor voltage. Lesser fluctuations in these parameters ensure increased efficiency and thus extended life of a PEMFC. The results are also compared with super twisting algorithm STA to show the effectiveness of the proposed techniques. ISMC and FTISMC yield 7% and 20% improved performance as compared to STA. The proposed research finds potential applications in hydrogen-powered fuel cell electric vehicles., Competing Interests: The authors have declared that no competing interests exist.

Interacting strategies in evolutionary games is studied analytically in a well-mixed population using a Markov chain method. By establishing a correspondence between an evolutionary game and Markov chain dynamics, we show that results obtained from the fundamental matrix method in Markov chain dynamics are equivalent to corresponding ones in the evolutionary game. In the conventional fundamental matrix method, quantities like fixation probability and fixation time are calculable. Using a theorem in the fundamental matrix method, conditional fixation time in the absorbing Markov chain is calculable. Also, in the ergodic Markov chain, the stationary probability distribution that describes the Markov chain's stationary state is calculable analytically. Finally, the Rock, scissor, paper evolutionary game are evaluated as an example, and the results of the analytical method and simulations are compared. Using this analytical method saves time and computational facility compared to prevalent simulation methods., Competing Interests: The authors have declared that no competing interests exist.

Path planning plays an essential role in mobile robot navigation, and the A* algorithm is one of the best-known path planning algorithms. However, the traditional A* algorithm has some limitations, such as slow planning speed, close to obstacles. In this paper, we propose an improved A*-based algorithm, called the EBS-A* algorithm, that introduces expansion distance, bidirectional search, and smoothing into path planning. The expansion distance means keeping an extra space from obstacles to improve path reliability by avoiding collisions. Bidirectional search is a strategy searching path from the start node and the goal node simultaneously. Smoothing improves path robustness by reducing the number of right-angle turns. In addition, simulation tests for the EBS-A* algorithm are performed, and the effectiveness of the proposed algorithm is verified by transferring it to a robot operating system (ROS). The experimental results show that compared with the traditional A* algorithm, the proposed algorithm improves the path planning efficiency by 278% and reduces the number of critical nodes by 91.89% and the number of right-angle turns by 100%., Competing Interests: The authors have declared that no competing interests exist.

The reformations of the electrical power sector have resulted in very dynamic and competitive market that has changed many elements of the power industry. Excessive demand of energy, depleting the fossil fuel reserves of planet and releasing the toxic air pollutant, has been causing harm to earth habitats. In this new situation, insufficiency of energy supplies, rising power generating costs, high capital cost of renewable energy equipment, environmental concerns of wind power turbines, and ever-increasing demand for electrical energy need efficient economic dispatch. The objective function in practical economic dispatch (ED) problem is nonlinear and non-convex, with restricted equality and inequality constraints, and traditional optimization methods are incapable of resolving such non-convex problems. Over the recent decade, meta-heuristic optimization approaches have acquired enormous reputation for obtaining a solution strategy for such types of ED issues. In this paper, a novel soft computing optimization technique is proposed for solving the dynamic economic dispatch problem (DEDP) of complex non-convex machines with several constraints. Our premeditated framework employs the genetic algorithm (GA) as an initial optimizer and sequential quadratic programming (SQP) for the fine tuning of the pre-optimized run of GA. The simulation analysis of GA-SQP performs well by acquiring less computational cost and finite time of execution, while providing optimal generation of powers according to the targeted power demand and load, whereas subject to valve point loading effect (VPLE) and multiple fueling option (MFO) constraints. The adequacy of the presented strategy concerning accuracy, convergence as well as reliability is verified by employing it on ten benchmark case studies, including non-convex IEEE bus system at the same time also considering VPLE of thermal power plants. The potency of designed optimization seems more robust with fast convergence rate while evaluating the hard bounded DEDP. Our suggested hybrid method GA-SQP converges to achieve the best optimal solution in a confined environment in a limited number of simulations. The simulation results demonstrate applicability and adequacy of the given hybrid schemes over conventional methods., Competing Interests: The authors have declared that no competing interests exist.

A multistage pressure reducing valve with specially designed pressure reducing components is presented in this paper. As the deformation of the valve trims under fluid-solid-heat coupling has an important influence on the operation reliability of the valve, a numerical simulation is carried out to analyse the flow field characteristic in the valve and radial deformation of the valve trims using the ANSYS software. And a deformation experiment is designed to validate the deformations of the valve trims at high temperature of 693.15 K. The results indicate that the simulation results agree well with the experimental data. Moreover, it is found that the temperature field has the most significant influence on the deformation of the valve trims, the radial deformations of the matching surface vary from 0.439 to 0.442 mm. And the radial deformations caused by other factors vary from 0.005 to 0.015 mm. In addition, as a novel indicator, the clearance after deformation of the matching surface is used to evaluate the operation reliability of the valve. By using the GAP function in ANSYS static module, the clearances of the matching surface are obtained at different openings under the condition of fluid-solid-heat coupling, further indicating that the initial clearance between the valve plug and inner sleeve should be greater than 0.014 mm to ensure the operation reliability of the valve., Competing Interests: The authors have declared that no competing interests exist.

This paper considers the quantile regression model with individual fixed effects for spatial panel data. Efficient minimum distance quantile regression estimators based on instrumental variable (IV) method are proposed for parameter estimation. The proposed estimator is computational fast compared with the IV-FEQR estimator proposed by Dai et al. (2020). Asymptotic properties of the proposed estimators are also established. Simulations are conducted to study the performance of the proposed method. Finally, we illustrate our methodologies using a cigarettes demand data set., Competing Interests: The authors have declared that no competing interests exist.

Ramp metering on freeway is one of the effective methods to alleviate traffic congestion. This paper advances the field of freeway ramp metering by introducing an application to the on-ramp, capitalizing on the macro traffic follow theory and improved the freeway traffic flow. The Particle Swarm Optimization (PSO) based on Proportional Integral Derivative (PID) controller is further developed to single ramp metering as well as to optimize the PID parameters. The approach is applied to a case study of the Changyi Freeway(G5513) in Hunan, China. The simulation is conducted by applying the actual profile traffic data to PID controller to adjust the entering traffic flow on the freeway on-ramp. The results show that the PSO-PID controller tends to converge in about 80 minutes, and the density tends to be stable after 240 iterations. The system has smaller oscillation, more accurate adjustment of ramp regulation rate, and more ideal expected traffic flow density. The traffic congestion on mainline is effectively slowed down, traffic efficiency is improved, and travel time and cost are reduced. The nonlinear processing ability of PSO-PID controller overcomes the defects of the traditional manual closing ramp, and can be successfully applied in the field of intelligent ramp metering., Competing Interests: The authors have declared that no competing interests exist.

Efficient order execution plays a crucial role in the activity of every company. In production planning it is important to find a balance between the fluctuations of orders and stability of production flow regarding the company. One of the methods of achieving this goal is heijunka (production leveling). This paper presents a study of choosing the best variant of the production planning and control system for the production of standard parts. Three variants are investigated regarding delays in order delivery. The analysis of variants was conducted using a simulation method. The method of choosing the best variant for the production system being investigated is also proposed. The results show that the best variant is a mix of production leveling and production "for stock"., Competing Interests: The authors have declared that no competing interests exist.

This paper mainly studies the globally fixed-time synchronization of a class of coupled neutral-type neural networks with mixed time-varying delays via discontinuous feedback controllers. Compared with the traditional neutral-type neural network model, the model in this paper is more general. A class of general discontinuous feedback controllers are designed. With the help of the definition of fixed-time synchronization, the upper right-hand derivative and a defined simple Lyapunov function, some easily verifiable and extensible synchronization criteria are derived to guarantee the fixed-time synchronization between the drive and response systems. Finally, two numerical simulations are given to verify the correctness of the results. [ABSTRACT FROM AUTHOR]

Currently, the connectivity calculation of complex pipeline networks is mostly simplified or ignores the influence of nodes such as elbows and tees on the connectivity reliability of the entire network. Historical earthquake damage shows that the seismic performance of municipal buried pipelines depends on the ability of nodes and interfaces to resist deformation. The influence of node reliability on network connectivity under reciprocal loading is a key issue to be addressed. Therefore, based on the general connectivity probabilistic analysis algorithm, this paper embeds the reliability of nodes into the reliability of edges, and derives a more detailed and comprehensive on-intersecting minimum path recursive decomposition algorithm considering elbows, tees, and other nodes; then, based on the reliability calculation theory of various pipeline components, the reliability of various nodes in different soil is calculated using finite element numerical simulation; finally, the reliability of a small simple pipeline network and a large complex pipeline network are used as examples to reveal the importance of considering nodes in the connectivity calculation of pipeline network. The reliability of the network system decreases significantly after considering the nodes such as elbows and tees. The damage of one node usually causes the failure of the whole pipes of the path. The damage probability is greater in the area with dense elbow and tee nodes. In this study, all types of nodes that are more prone to damage are considered in detail in the calculation. As a result, the proposed algorithm has been improved in computational accuracy, which lays the foundation for further accurate calculation of pipeline network connectivity. [ABSTRACT FROM AUTHOR]

A bridge role metric model is put forward in this paper. Compared with previous metric models, our solution of a large-scale object-oriented software system as a complex network is inherently more realistic. To acquire nodes and links in an undirected network, a new model that presents the crucial connectivity of a module or the hub instead of only centrality as in previous metric models is presented. Two previous metric models are described for comparison. In addition, it is obvious that the fitting curve between the results and degrees can well be fitted by a power law. The model represents many realistic characteristics of actual software structures, and a hydropower simulation system is taken as an example. This paper makes additional contributions to an accurate understanding of module design of software systems and is expected to be beneficial to software engineering practices. [ABSTRACT FROM AUTHOR]

In this paper, a mathematical model based on spherical differential unit cell is proposed as a model for studying seasonal freeze-thaw soil space infinitesimal differential unit cell. From this model, the basic equations of permafrost moisture and heat flow motion are directly derived, then the linked equations form the permafrost water-heat coupled transport model. On this basis, the one-dimensional seasonal permafrost water-heat transport equation is derived. The model reduces the original spatial three-variable coordinate system (parallel hexahedron) into a coupled equation with a single spherical radius (R) as the independent variable, so the iterations of the numerical simulation algorithm is greatly reduced and the complexity is decreased. Finally, the model is used to simulate the seasonal freeze-thaw soil in the ShiHeZi region of Xinjiang, China. The principle of the simulation is to collect the soil temperature and humidity values of the region in layers and fixed-points using a homemade freeze-thaw soil sensor, after that we solve it by numerical calculation using MATLAB. The analysis results show that the maximum relative error of the model we proposed is 4.36, the minimum error is 0.98, and the average error is 2.515. The numerical simulation results are basically consistent with the measured data, then the proposed model is consistent with the matching states of permafrost moisture content and soil temperature in the region at different times. In addition, the experiments also demonstrate the reliability and accuracy of the model., Competing Interests: The authors have declared that no competing interests exist.

Accurate characterization and simulation of electromagnetic propagation can be obtained by ray-tracing methods, which are based on a high frequency approximation to the Maxwell equations and describe the propagating field as a set of propagating rays, reflecting, diffracting and scattering over environment elements. However, this approach has been usually too computationally costly to be used in large and dynamic scenarios, but this situation is changing thanks the increasing availability of efficient ray-tracing libraries for graphical processing units. In this paper we present Opal, an electromagnetic propagation simulation tool implemented with ray-tracing on graphical processing units, which is part of the Veneris framework. Opal can be used as a stand-alone ray-tracing simulator, but its main strength lies in its integration with the game engine, which allows to generate customized 3D environments quickly and intuitively. We describe its most relevant features and provide implementation details, highlighting the different simulation types it supports and its extension possibilites. We provide application examples and validate the simulation on demanding scenarios, such as tunnels, where we compare the results with theoretical solutions and further discuss the tradeoffs between the simulation types and its performance., Competing Interests: The authors have declared that no competing interests exist.

The complex design of transportation infrastructure hinders communication between different roles in the project, which makes it difficult to promote the Integrated Project Delivery (IPD) mode. This paper discusses a design simulation and communication system based on Building Information Modeling and Virtual Reality for transportation infrastructure (DSC-BV-TI system), integrated with BIM, with VR developed by using a game engine. Based on an analysis of the user's demand, the system introduces a three-dimensional BIM model of traffic infrastructure in an immersive VR environment and realizes the simulation design, weather simulation, virtual driving, sight distance calculation, visual simulation and other functions of traffic infrastructure project by using the system's safety assessment and scheme decision. The system is applied to the design of the Jinjiazhuang Extra-Long Tunnel project of the Yan-Chong Expressway in Hebei Province, which was built for the 2022 Winter Olympics. The results show that, using the DSC-BV-TI system, the designer has completed a display of the overall scheme: the user can use the steering wheel to drive a vehicle; use the head-mounted display to play the picture; realize the simulation and interaction in a variety of simulated weather conditions and environments; and use IPD mode to communicate and make decisions on the design scheme of the traffic infrastructure, tunnel speed limit and other aspects that play a key role. The DSC-BV-TI system has 8 advantages and 4 disadvantages identified through a questionnaire survey, the advantages including high fidelity, high efficiency and low cost. At the same time, according to the research results, three suggestions to help improve the system are discussed. DSC-BV-TI system as a communication bridge between the design team and other stakeholders reduces the communication gap and promotes the implementation of the IPD mode in transportation infrastructure projects., Competing Interests: The authors have declared that no competing interests exits.

The firefly algorithm (FA) is proposed as a heuristic algorithm, inspired by natural phenomena. The FA has attracted a lot of attention due to its effectiveness in dealing with various global optimization problems. However, it could easily fall into a local optimal value or suffer from low accuracy when solving high-dimensional optimization problems. To improve the performance of the FA, this paper adds the self-adaptive logarithmic inertia weight to the updating formula of the FA, and proposes the introduction of a minimum attractiveness of a firefly, which greatly improves the convergence speed and balances the global exploration and local exploitation capabilities of FA. Additionally, a step-size decreasing factor is introduced to dynamically adjust the random step-size term. When the dimension of a search is high, the random step-size becomes very small. This strategy enables the FA to explore solution more accurately. This improved FA (LWFA) was evaluated with ten benchmark test functions under different dimensions (D = 10, 30, and 100) and with standard IEEE CEC 2010 benchmark functions. Simulation results show that the performance of improved FA is superior comparing to the standard FA and other algorithms, i.e., particle swarm optimization, the cuckoo search algorithm, the flower pollination algorithm, the sine cosine algorithm, and other modified FA. The LWFA also has high performance and optimal efficiency for a number of optimization problems., Competing Interests: The authors have declared that no competing interests exist.

The technology of artificial ground freezing has been widely applied in geotechnical engineering to support underground spaces, whereas the effects of excavation-induced large deformation and frictional and dilatant behavior of geomaterials are neglected in the current design. In this paper, a rigorous elastic-plastic solution of cavity contraction is proposed using a non-associated Mohr-Coulomb failure criterion to provide the optimal thickness of the frozen soil wall for excavation using artificial ground freezing technology, considering an interaction between the frozen soil wall and the surrounding soil/rock. After validation of a case study on a deep mine shaft against a numerical simulation, a thorough parametric study investigates the variation in the optimal thickness with the soil properties and initial stress conditions, as well as the effects of interaction and the critical condition. Compared to the existing solution, the proposed optimal thickness of the frozen soil wall is shown to contribute to both the design and cost-effectiveness in practical engineering, including tunneling and mine shaft construction. [ABSTRACT FROM AUTHOR]

Numerical modeling of the migration of three-phase immiscible fluid flow in variably saturated zones is challenging due to the different behavior of the system between unsaturated and saturated zones. This behavior results in the use of different numerical methods for the numerical simulation of the fluid flow depending on whether it is in the unsaturated or saturated zones. This paper shows that using a high-resolution shock-capturing conservative method to resolve the nonlinear governing coupled partial differential equations of a three-phase immiscible fluid flow allows the numerical simulation of the system through both zones providing a unitary vision (and resolution) of the migration of an immiscible contaminant problem within a porous medium. In particular, using different initial scenarios (including impermeable "lenses" in heterogeneous aquifers), three-dimensional numerical simulation results are presented on the temporal evolution of the contaminant migration following the saturation profiles of the three-phases fluids flow in variably saturated zones. It is considered either light nonaqueous phase liquid with a density less than the water, or dense nonaqueous phase liquid, which has densities greater than the water initially released in unsaturated dry soil. Our study shows that the fate of the migration of immiscible contaminants in variably saturated zones can be accurately described, using a unique mathematical conservative model, with different evolution depending on the value of the system's physical parameters, including the contaminant density, and accurately tracking the evolution of the sharp (shock) contaminant front. [ABSTRACT FROM AUTHOR]

Linear Parameter Varying (LPV) systems and their control have gained attraction recently as they approximate nonlinear systems with higher order than ordinary linear systems. On the other hand, time delay is an inherent part of various real-life applications. A supervisory control structure is proposed in this paper for LPV systems subject to time delays. In the proposed control structure, a supervisor selects the most suitable controller from a bank of controllers; which desires to enhance the performance of closed-loop system in contrast with using a single robust controller. The analysis is based on the celebrated Smith predictor for time delay compensation and we provide a sufficient condition to assure the stability of the closed-loop switched system in terms of dwell time. Simulations on blood pressure control of hypertension patients in postoperative scenario are used to exemplify the effectiveness of the utilized technique. The operating region of the system is partitioned into five smaller operating regions to construct corresponding robust controllers and perform hysteresis switching amongst them. Simulation results witnessed that the proposed control scheme demonstrated a pressure undershoot less than the desired value of 10 mmHg while the Mean Arterial Pressure (MAP) remains within ±5 mmHg of the desired value., Competing Interests: The authors have declared that no competing interests exist.

Truck rollover is a problem that seriously endangers the safety of human life. Under special conditions, when the driver takes a sharp turn, the truck is most prone to rollover. Speed seriously affects the driving stability of the truck in a sharp turn, but the calculation of the safe speed is not accurate enough at present. The aim of this paper is to develop a more accurate safe speed calculation method to avoid the truck rollover in a sharp turn. Firstly, the calculation formula of the rollover threshold was derived based on a theoretical model, then, the simulation tests were carried out. We selected a 4-axle truck with a total weight of 30t as the subject, simulated the dynamic process of the truck rollover in a sharp turn with TruckSim, evaluated the dynamic rollover risk levels of the truck during this process, and verified the accuracy of the simulation results by results of the theoretical model. Finally, by analyzing the steering principle of the vehicle, the safe speed threshold and the limit speed threshold of the truck in a sharp turn were calculated according to the lateral acceleration corresponding to the rollover risk levels. The results show that no matter what the loading condition of the truck is, when the rollover margin is reduced to about 0.15g, the truck just reaches the risk level of critical rollover; the result provides an accurate algorithm for speed thresholds of the truck when turning radius is less than 250 m. The research provides a calculation method for safe speed of trucks from a dynamic perspective. The research results can be applied to the speed warning system of trucks, which can make drivers better control the rollover risk of trucks in the process of driving and improve driving safety., Competing Interests: The authors have declared that no competing interests exist. There are no patents, products in development or marketed products association with this research to declare. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

Sit-to-stand movement (STS) is a mundane activity, controlled by the central-nervous-system (CNS) via a complex neurophysiological mechanism that involves coordination of limbs for successful execution. Detailed analysis and accurate simulations of STS task have significant importance in clinical intervention, rehabilitation process, and better design for assistive devices. The CNS controls STS motion by taking inputs from proprioceptors. These input signals suffer delay in transmission to CNS making movement control and coordination more complex which may lead to larger body exertion or instability. This paper deals with the problem of STS movement execution in the presence of proprioceptive feedback delays in joint position and velocity. We present a high-gain observer (HGO) based feedback linearization control technique to mimic the CNS in controlling the STS transfer. The HGO estimates immeasurable delayed states to generate input signals for feedback. The feedback linearization output control law generates the passive torques at joints to execute the STS movement. The H2 dynamic controller calculates the optimal linear gains by using physiological variables. The whole scheme is simulated in MATLAB/Simulink. The simulations illustrate physiologically improved results. The ankle, knee, and hip joint position profiles show a high correlation of 0.91, 0.97, 0.80 with the experimentally generated reference profiles. The faster observer dynamics and global boundness of controller result in compensation of delays. The low error and high correlation of simulation results demonstrate (1) the reliability and effectiveness of the proposed scheme for customization of human models and (2) highlight the fact that for detailed analysis and accurate simulations of STS movement the modeling scheme must consider nonlinearities of the system., Competing Interests: The authors have declared that no competing interests exist.

Pandemics have been recognized as a serious global threat to humanity. To effectively prevent the spread and outbreak of the epidemic disease, theoretical models intended to depict the disease dynamics have served as the main tools to understand its underlying mechanisms and thus interrupt its transmission. Two commonly-used models are mean-field compartmental models and agent-based models (ABM). The former ones are analytically tractable for describing the dynamics of subpopulations by cannot explicitly consider the details of individual movements. The latter one is mainly used to the spread of epidemics at a microscopic level but have limited simulation scale for the randomness of the results. To overcome current limitations, a hierarchical hybrid modeling and simulation method, combining mean-field compartmental model and ABM, is proposed in this paper. Based on this method, we build a hybrid model, which takes both individual heterogeneity and the dynamics of sub-populations into account. The proposed model also investigates the impact of combined interventions (i. e. vaccination and pre-deployment training) for healthcare workers (HCWs) on the spread of disease. Taking the case of 2014-2015 Ebola Virus Disease (EVD) in Sierra Leone as an example, we examine its spreading mechanism and evaluate the effect of prevention by our parameterized and validated hybrid model. According to our simulation results, an optimal combination of pre-job training and vaccination deployment strategy has been identified. To conclude, our hybrid model helps informing the synergistic disease control strategies and the corresponding hierarchical hybrid modeling and simulation method can further be used to understand the individual dynamics during epidemic spreading in large scale population and help inform disease control strategies for different infectious disease., Competing Interests: The authors have declared that no competing interests exist.

This paper presents regulation of an asynchronous induction motor so as to create a stable vacuum milk pump using Variable Frequency Drive (VFD). Contribution includes providing information about the usage of the VFD, which regulates the activity of an asynchronous induction motor so that the vacuum pump milking machine creates stable vacuum. The paper describes the functional and time dependence of input values and output parameters of frequency converters at changing electric motor speed. For simulation and verification the milking process a mathematical model of the milking machine was created. The simulation was verified in Matlab/Simulink software. The constructed mathematical model showed symmetric regulation. Control model symmetry was verified at the laboratory of milking machine. The possibility to remove the control valve from milking equipment was proven using the measured data. It was found that constant vacuum values can be maintained. A constant vacuum can be maintained by changing vacuum pump speed. This control is of an accepted standard (ISO 5707: 2007). The power saving control values (on the milking equipment) of the VFD were positive throughout the measuring range. The performance of the milking vacuum pump is normally designed from the maximum air consumption of the milking machine at nominal vacuum (50 kPa), and a performance reserve is added to this. This means that the pump is operated between the ranges 7.53 and 15.06 dm3 s-1. By using a vacuum pump controlled by a VFD, power savings can be achieved from 32.50% to 54.02% compared to a control valve., Competing Interests: The authors have declared that no competing interests exist.

In this paper, the coevolution mechanism of trust-based partner switching among partitioned regions on an adaptive network is studied. We investigate a low-information approach to building trust and cooperation in public goods games. Unlike reputation, trust scores are only given to players by those with whom they have a relationship in the game, depending on the game they play together. A player's trust score for a certain neighbor is given and known by that player only. Players can adjust their connections to neighbors with low trust scores by switching their partners to other players. When switching partners, players divide other nodes in the network into three regions: immediate neighbors as the known region, indirectly connected second-order neighbors as the intermediate region, and other nodes as the unknown region. Such choices and compartmentalization often occur in global and regional economies. Our results show that preference for switching to partners in the intermediate region is not conducive to spreading cooperation, while random selection has the disadvantage of protecting the cooperator. However, selecting new partners in the remaining two regions based on the average trust score of the known region performs well in both protecting partners and finding potential cooperators. Meanwhile, by analyzing the parameters, we find that the influence of vigilance increasing against unsatisfactory behavior on evolution direction depends on the level of cooperation reward., Competing Interests: The authors have declared that no competing interests exist.

Objective: The objectives of this paper are to 1) construct a new network model compatible with distributed computation, 2) construct the full optimal power flow (OPF) in a distributed fashion so that an effective, non-inferior solution can be found, and 3) develop a scalable algorithm that guarantees the convergence to a local minimum., Existing Challenges: Due to the nonconvexity of the problem, the search for a solution to OPF problems is not scalable, which makes the OPF highly limited for the system operation of large-scale real-world power grids-"the curse of dimensionality". The recent attempts at distributed computation aim for a scalable and efficient algorithm by reducing the computational cost per iteration in exchange of increased communication costs., Motivation: A new network model allows for efficient computation without increasing communication costs. With the network model, recent advancements in distributed computation make it possible to develop an efficient and scalable algorithm suitable for large-scale OPF optimizations., Methods: We propose a new network model in which all nodes are directly connected to the center node to keep the communication costs manageable. Based on the network model, we suggest a nodal distributed algorithm and direct communication to all nodes through the center node. We demonstrate that the suggested algorithm converges to a local minimum rather than a point, satisfying the first optimality condition., Results: The proposed algorithm identifies solutions to OPF problems in various IEEE model systems. The solutions are identical to those using a centrally optimized and heuristic approach. The computation time at each node does not depend on the system size, and Niter does not increase significantly with the system size., Conclusion: Our proposed network model is a star network for maintaining the shortest node-to-node distances to allow a linear information exchange. The proposed algorithm guarantees the convergence to a local minimum rather than a maximum or a saddle point, and it maintains computational efficiency for a large-scale OPF, scalable algorithm., Competing Interests: The authors have declared that no competing interests exist.

In 1979 Haralick famously introduced a method for analyzing the texture of an image: a set of statistics extracted from the co-occurrence matrix. In this paper we investigate novel sets of texture descriptors extracted from the co-occurrence matrix; in addition, we compare and combine different strategies for extending these descriptors. The following approaches are compared: the standard approach proposed by Haralick, two methods that consider the co-occurrence matrix as a three-dimensional shape, a gray-level run-length set of features and the direct use of the co-occurrence matrix projected onto a lower dimensional subspace by principal component analysis. Texture descriptors are extracted from the co-occurrence matrix evaluated at multiple scales. Moreover, the descriptors are extracted not only from the entire co-occurrence matrix but also from subwindows. The resulting texture descriptors are used to train a support vector machine and ensembles. Results show that our novel extraction methods improve the performance of standard methods. We validate our approach across six medical datasets representing different image classification problems using the Wilcoxon signed rank test. The source code used for the approaches tested in this paper will be available at: http://www.dei.unipd.it/wdyn/?IDsezione=3314&IDgruppo_pass=124&preview=. [ABSTRACT FROM AUTHOR]

Analysis of the slipstream development around the high-speed trains in tunnels would provide references for assessing the transient gust loads on trackside workers and trackside furniture in tunnels. This paper focuses on the computational analysis of the slipstream caused by high-speed trains passing through double-track tunnels with a cross-sectional area of 100 m2. Three-dimensional unsteady compressible Reynolds-averaged Navier-Stokes equations and a realizable k-ε turbulence model were used to describe the airflow characteristics around a high-speed train in the tunnel. The moving boundary problem was treated using the sliding mesh technology. Three cases were simulated in this paper, including two tunnel lengths and two different configurations of the train. The train speed in these three cases was 250 km/h. The accuracy of the numerical method was validated by the experimental data from full-scale tests, and reasonable consistency was obtained. The results show that the flow field around the high-speed trains can be divided into three distinct regions: the region in front of the train nose, the annular region and the wake region. The slipstream development along the two sides of train is not in balance and offsets to the narrow side in the double-track tunnels. Due to the piston effect, the slipstream has a larger peak value in the tunnel than in open air. The tunnel length, train length and length ratio affect the slipstream velocities; in particular, the velocities increase with longer trains. Moreover, the propagation of pressure waves also induces the slipstream fluctuations: substantial velocity fluctuations mainly occur in front of the train, and weaken with the decrease in amplitude of the pressure wave. [ABSTRACT FROM AUTHOR]