Search

With the rapid development of information technology, scientific social networks (SSNs) have become the fastest and most convenient way for researchers to communicate with each other. Many published papers are shared via SSNs every day, resulting in the problem of information overload. How to appropriately recommend personalized and highly valuable papers for researchers is becoming more urgent. However, when recommending papers in SSNs, only a small amount of positive instances are available, leaving a vast amount of unlabelled data, in which negative instances and potential unseen positive instances are mixed together, which naturally belongs to One-Class Collaborative Filtering (OCCF) problem. Therefore, considering the extreme data imbalance and data sparsity of this OCCF problem, a hybrid approach of Social and Content aware One-class Recommendation of Papers in SSNs, termed SCORP, is proposed in this study. Unlike previous approaches recommended to address the OCCF problem, social information, which has been proved playing a significant role in performing recommendations in many domains, is applied in both the profiling of content-based filtering and the collaborative filtering to achieve superior recommendations. To verify the effectiveness of the proposed SCORP approach, a real-life dataset from CiteULike was employed. The experimental results demonstrate that the proposed approach is superior to all of the compared approaches, thus providing a more effective method for recommending papers in SSNs. [ABSTRACT FROM AUTHOR]

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a “dying” paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing “offspring”. Practically, this might be used to trace the successive published milestones of a research field. [ABSTRACT FROM AUTHOR]

Evaluating the impact of a scholarly article is of great significance and has attracted great attentions. Although citation-based evaluation approaches have been widely used, these approaches face limitations e.g. in identifying anomalous citations patterns. This negligence would inevitably cause unfairness and inaccuracy to the article impact evaluation. In this study, in order to discover the anomalous citations and ensure the fairness and accuracy of research outcome evaluation, we investigate the citation relationships between articles using the following factors: collaboration times, the time span of collaboration, citing times and the time span of citing to weaken the relationship of Conflict of Interest (COI) in the citation network. Meanwhile, we study a special kind of COI, namely suspected COI relationship. Based on the COI relationship, we further bring forward the COIRank algorithm, an innovative scheme for accurately assessing the impact of an article. Our method distinguishes the citation strength, and utilizes PageRank and HITS algorithms to rank scholarly articles comprehensively. The experiments are conducted on the American Physical Society (APS) dataset. We find that about 80.88% articles contain contributed citations by co-authors in 26,366 articles and 75.55% articles among these articles are cited by the authors belonging to the same affiliation, indicating COI and suspected COI should not be ignored for evaluating impact of scientific papers objectively. Moreover, our experimental results demonstrate COIRank algorithm significantly outperforms the state-of-art solutions. The validity of our approach is verified by using the probability of Recommendation Intensity. [ABSTRACT FROM AUTHOR]

This paper, based on differential privacy protecting K-means clustering algorithm, realizes privacy protection by adding data-disturbing Laplace noise to cluster center point. In order to solve the problem of Laplace noise randomness which causes the center point to deviate, especially when poor availability of clustering results appears because of small privacy budget parameters, an improved differential privacy protecting K-means clustering algorithm was raised in this paper. The improved algorithm uses the contour coefficients to quantitatively evaluate the clustering effect of each iteration and add different noise to different clusters. In order to be adapted to the huge number of data, this paper provides an algorithm design in MapReduce Framework. Experimental finding shows that the new algorithm improves the availability of the algorithm clustering results under the condition of ensuring individual privacy without significantly increasing its operating time. [ABSTRACT FROM AUTHOR]

Recently, computational Grids have proven to be a good solution for processing large-scale, computation intensive problems. However, the heterogeneity, dynamics of resources and diversity of applications requirements have always been important factors affecting their performance. In response to these challenges, this work first builds a Grid job scheduling architecture that can dynamically monitor Grid computing center resources and make corresponding scheduling decisions. Second, a Grid job model is proposed to describe the application requirements. Third, this paper studies the characteristics of commercial interconnection networks used in Grids and forecast job transmission time. Fourth, this paper proposes an application-aware job scheduling mechanism (AJSM) that includes periodic scheduling flow and a heuristic application-aware deadline constraint job scheduling algorithm. The rigorous performance evaluation results clearly demonstrate that the proposed application-aware job scheduling mechanism can successful schedule more Grid jobs than the existing algorithms. For successful scheduled jobs, our proposed AJSM method is the best algorithm for job average processing time and makespan. [ABSTRACT FROM AUTHOR]

This paper presents a novel method on the optimization of bi-objective Flexible Job-shop Scheduling Problem (FJSP) under stochastic processing times. The robust counterpart model and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) are used to solve the bi-objective FJSP with consideration of the completion time and the total energy consumption under stochastic processing times. The case study on GM Corporation verifies that the NSGA-II used in this paper is effective and has advantages to solve the proposed model comparing with HPSO and PSO+SA. The idea and method of the paper can be generalized widely in the manufacturing industry, because it can reduce the energy consumption of the energy-intensive manufacturing enterprise with less investment when the new approach is applied in existing systems. [ABSTRACT FROM AUTHOR]

Past research on the process of extinguishing a fire typically used a traditional linear water jet falling point model and the results ignored external factors, such as environmental conditions and the status of the fire engine, even though the water jet falling point location prediction was often associated with these parameters and showed a nonlinear relationship. This paper constructed a BP (Back Propagation) neural network model. The fire gun nozzle characteristics were included as model inputs, and the water discharge point coordinates were the model outputs; thus, the model could precisely predict the water discharge point with small error and high precision to determine an accurate firing position and allow for the timely adjustment of the spray gun. To improve the slow convergence and local optimality problems of the BP neural network (BPNN), this paper further used a genetic algorithm to optimize the BPNN (GA-BPNN). The BPNN can be used to optimize the weights in the network to train them for global optimization. A genetic algorithm was introduced into the neural network approach, and the water jet landing prediction model was further improved. The simulation results showed that the prediction accuracy of the GA-BP model was better than that of the BPNN alone. The established model can accurately predict the location of the water jet, making the prediction results more useful for firefighters. [ABSTRACT FROM AUTHOR]

In this paper, we propose a spatial lag panel smoothing transition regression (SLPSTR) model ty considering spatial correlation of dependent variable in panel smooth transition regression model. This model combines advantages of both smooth transition model and spatial econometric model and can be used to deal with panel data with wide range of heterogeneity and cross-section correlation simultaneously. We also propose a Bayesian estimation approach in which the Metropolis-Hastings algorithm and the method of Gibbs are used for sampling design for SLPSTR model. A simulation study and a real data study are conducted to investigate the performance of the proposed model and the Bayesian estimation approach in practice. The results indicate that our theoretical method is applicable to spatial data with a wide range of spatial structures under finite sample. [ABSTRACT FROM AUTHOR]

With the increase of the camera resolution, the number of pixels contained in froth image is increased, which brings many challenges to image segmentation. Froth size and distribution are the important index in froth flotation. The segmentation of froth images is always a problem in building flotation model. In segmenting froth images, Otsu method is usually used to get a binary image for classification of froth images, this method can get a satisfactory segmentation result. However, each gray level is required to calculate each of the between-class variance, it takes a longer time in froth images with a large number of pixels. To solve this problem, an improved method is proposed in this paper. Most froth images have the pixel distribution characteristic that the gray histogram curve is a sawtooth shape. The proposed method uses polynomial to fit the curve of gray histogram and takes the characteristic of gray histogram's valley into consideration in Otsu method. Two performance comparison methods are introduced and used. Experimental comparison between Otsu method and the proposed method shows that the proposed method has a satisfactory image segmentation with a low computing time. [ABSTRACT FROM AUTHOR]

In the Bayesian Reinforcement Learning (BRL) setting, agents try to maximise the collected rewards while interacting with their environment while using some prior knowledge that is accessed beforehand. Many BRL algorithms have already been proposed, but the benchmarks used to compare them are only relevant for specific cases. The paper addresses this problem, and provides a new BRL comparison methodology along with the corresponding open source library. In this methodology, a comparison criterion that measures the performance of algorithms on large sets of Markov Decision Processes (MDPs) drawn from some probability distributions is defined. In order to enable the comparison of non-anytime algorithms, our methodology also includes a detailed analysis of the computation time requirement of each algorithm. Our library is released with all source code and documentation: it includes three test problems, each of which has two different prior distributions, and seven state-of-the-art RL algorithms. Finally, our library is illustrated by comparing all the available algorithms and the results are discussed. [ABSTRACT FROM AUTHOR]

Ensembles are a well established machine learning paradigm, leading to accurate and robust models, predominantly applied to predictive modeling tasks. Ensemble models comprise a finite set of diverse predictive models whose combined output is expected to yield an improved predictive performance as compared to an individual model. In this paper, we propose a new method for learning ensembles of process-based models of dynamic systems. The process-based modeling paradigm employs domain-specific knowledge to automatically learn models of dynamic systems from time-series observational data. Previous work has shown that ensembles based on sampling observational data (i.e., bagging and boosting), significantly improve predictive performance of process-based models. However, this improvement comes at the cost of a substantial increase of the computational time needed for learning. To address this problem, the paper proposes a method that aims at efficiently learning ensembles of process-based models, while maintaining their accurate long-term predictive performance. This is achieved by constructing ensembles with sampling domain-specific knowledge instead of sampling data. We apply the proposed method to and evaluate its performance on a set of problems of automated predictive modeling in three lake ecosystems using a library of process-based knowledge for modeling population dynamics. The experimental results identify the optimal design decisions regarding the learning algorithm. The results also show that the proposed ensembles yield significantly more accurate predictions of population dynamics as compared to individual process-based models. Finally, while their predictive performance is comparable to the one of ensembles obtained with the state-of-the-art methods of bagging and boosting, they are substantially more efficient. [ABSTRACT FROM AUTHOR]

For high-dimensional and massive data sets, traditional centralized gene expression programming (GEP) or improved algorithms lead to increased run-time and decreased prediction accuracy. To solve this problem, this paper proposes a new improved algorithm called distributed function mining for gene expression programming based on fast reduction (DFMGEP-FR). In DFMGEP-FR, fast attribution reduction in binary search algorithms (FAR-BSA) is proposed to quickly find the optimal attribution set, and the function consistency replacement algorithm is given to solve integration of the local function model. Thorough comparative experiments for DFMGEP-FR, centralized GEP and the parallel gene expression programming algorithm based on simulated annealing (parallel GEPSA) are included in this paper. For the waveform, mushroom, connect-4 and musk datasets, the comparative results show that the average time-consumption of DFMGEP-FR drops by 89.09%%, 88.85%, 85.79% and 93.06%, respectively, in contrast to centralized GEP and by 12.5%, 8.42%, 9.62% and 13.75%, respectively, compared with parallel GEPSA. Six well-studied UCI test data sets demonstrate the efficiency and capability of our proposed DFMGEP-FR algorithm for distributed function mining. [ABSTRACT FROM AUTHOR]

Analyzing and predicting the trend of price fluctuation has been receiving more and more attention, as price risk has become the focus of risk control research in heating oil futures market. A novel time series prediction model combined with the complex network method is put forward in the paper. First of all, this paper counts the cumulative time interval of different nodes in the network, and fits its growth trend with the Fourier model. Then a novel price fluctuation prediction model is established based on the effective information such as some topology properties extracted from the network. The results show that the Fourier model can predict the emergence time of new nodes in the next stage, and the established price fluctuation prediction model can infer the names of nodes in the prediction interval, so as to determine the forward-looking behavior of price evolution. Besides, liken to the NAR neural network, the prediction results obtained by the proposed method also show superiority, which has important theoretical value and academic significance for early warning and prediction of price behavior in the heating oil futures market. [ABSTRACT FROM AUTHOR]

The ensemble method random forests has become a popular classification tool in bioinformatics and related fields. The out-of-bag error is an error estimation technique often used to evaluate the accuracy of a random forest and to select appropriate values for tuning parameters, such as the number of candidate predictors that are randomly drawn for a split, referred to as mtry. However, for binary classification problems with metric predictors it has been shown that the out-of-bag error can overestimate the true prediction error depending on the choices of random forests parameters. Based on simulated and real data this paper aims to identify settings for which this overestimation is likely. It is, moreover, questionable whether the out-of-bag error can be used in classification tasks for selecting tuning parameters like mtry, because the overestimation is seen to depend on the parameter mtry. The simulation-based and real-data based studies with metric predictor variables performed in this paper show that the overestimation is largest in balanced settings and in settings with few observations, a large number of predictor variables, small correlations between predictors and weak effects. There was hardly any impact of the overestimation on tuning parameter selection. However, although the prediction performance of random forests was not substantially affected when using the out-of-bag error for tuning parameter selection in the present studies, one cannot be sure that this applies to all future data. For settings with metric predictor variables it is therefore strongly recommended to use stratified subsampling with sampling fractions that are proportional to the class sizes for both tuning parameter selection and error estimation in random forests. This yielded less biased estimates of the true prediction error. In unbalanced settings, in which there is a strong interest in predicting observations from the smaller classes well, sampling the same number of observations from each class is a promising alternative. [ABSTRACT FROM AUTHOR]

In this paper we introduce a novel algorithm, called Exogenous Fitness, to calculate the Fitness of subnational entities and we apply it to the states of Brazil. In the last decade, several indices were introduced to measure the competitiveness of countries by looking at the complexity of their export basket. Tacchella et al (2012) developed a non-monetary metric called Fitness. In this paper, after an overview about Brazil as a whole and the comparison with the other BRIC countries, we introduce a new methodology based on the Fitness algorithm, called Exogenous Fitness. Combining the results with the Gross Domestic Product per capita (GDPp), we look at the dynamics of the Brazilian states in the Fitness-Income plane. Two regimes are distinguishable: one with high predictability and the other with low predictability, showing a deep analogy with the heterogeneous dynamics of the World countries. Furthermore, we compare the ranking of the Brazilian states according to the Exogenous Fitness with the ranking obtained through two other techniques, namely Endogenous Fitness and Economic Complexity Index. [ABSTRACT FROM AUTHOR]

Recommender systems are vulnerable to shilling attacks. Forged user-generated content data, such as user ratings and reviews, are used by attackers to manipulate recommendation rankings. Shilling attack detection in recommender systems is of great significance to maintain the fairness and sustainability of recommender systems. The current studies have problems in terms of the poor universality of algorithms, difficulty in selection of user profile attributes, and lack of an optimization mechanism. In this paper, a shilling behaviour detection structure based on abnormal group user findings and rating time series analysis is proposed. This paper adds to the current understanding in the field by studying the credibility evaluation model in-depth based on the rating prediction model to derive proximity-based predictions. A method for detecting suspicious ratings based on suspicious time windows and target item analysis is proposed. Suspicious rating time segments are determined by constructing a time series, and data streams of the rating items are examined and suspicious rating segments are checked. To analyse features of shilling attacks by a group user’s credibility, an abnormal group user discovery method based on time series and time window is proposed. Standard testing datasets are used to verify the effect of the proposed method. [ABSTRACT FROM AUTHOR]

Machine Learning (ML) methods have been proposed in the academic literature as alternatives to statistical ones for time series forecasting. Yet, scant evidence is available about their relative performance in terms of accuracy and computational requirements. The purpose of this paper is to evaluate such performance across multiple forecasting horizons using a large subset of 1045 monthly time series used in the M3 Competition. After comparing the post-sample accuracy of popular ML methods with that of eight traditional statistical ones, we found that the former are dominated across both accuracy measures used and for all forecasting horizons examined. Moreover, we observed that their computational requirements are considerably greater than those of statistical methods. The paper discusses the results, explains why the accuracy of ML models is below that of statistical ones and proposes some possible ways forward. The empirical results found in our research stress the need for objective and unbiased ways to test the performance of forecasting methods that can be achieved through sizable and open competitions allowing meaningful comparisons and definite conclusions. [ABSTRACT FROM AUTHOR]

In this paper, we propose a hybrid method to forecast the stock prices called High-order-fuzzy-fluctuation-Trends-based Back Propagation(HTBP)Neural Network model. First, we compare each value of the historical training data with the previous day's value to obtain a fluctuation trend time series (FTTS). On this basis, the FTTS blur into fuzzy time series (FFTS) based on the fluctuation of the increasing, equality, decreasing amplitude and direction. Since the relationship between FFTS and future wave trends is nonlinear, the HTBP neural network algorithm is used to find the mapping rules in the form of self-learning. Finally, the results of the algorithm output are used to predict future fluctuations. The proposed model provides some innovative features:(1)It combines fuzzy set theory and neural network algorithm to avoid overfitting problems existed in traditional models. (2)BP neural network algorithm can intelligently explore the internal rules of the actual existence of sequential data, without the need to analyze the influence factors of specific rules and the path of action. (3)The hybrid modal can reasonably remove noises from the internal rules by proper fuzzy treatment. This paper takes the TAIEX data set of Taiwan stock exchange as an example, and compares and analyzes the prediction performance of the model. The experimental results show that this method can predict the stock market in a very simple way. At the same time, we use this method to predict the Shanghai stock exchange composite index, and further verify the effectiveness and universality of the method. [ABSTRACT FROM AUTHOR]

With the development of computer network bandwidth, packet classification algorithms which are able to deal with large-scale rule sets are in urgent need. Among the existing algorithms, researches on packet classification algorithms based on hierarchical trie have become an important packet classification research branch because of their widely practical use. Although hierarchical trie is beneficial to save large storage space, it has several shortcomings such as the existence of backtracking and empty nodes. This paper proposes a new packet classification algorithm, Hierarchical Trie Algorithm Based on Expectation-Maximization Clustering (HTEMC). Firstly, this paper uses the formalization method to deal with the packet classification problem by means of mapping the rules and data packets into a two-dimensional space. Secondly, this paper uses expectation-maximization algorithm to cluster the rules based on their aggregate characteristics, and thereby diversified clusters are formed. Thirdly, this paper proposes a hierarchical trie based on the results of expectation-maximization clustering. Finally, this paper respectively conducts simulation experiments and real-environment experiments to compare the performances of our algorithm with other typical algorithms, and analyzes the results of the experiments. The hierarchical trie structure in our algorithm not only adopts trie path compression to eliminate backtracking, but also solves the problem of low efficiency of trie updates, which greatly improves the performance of the algorithm. [ABSTRACT FROM AUTHOR]

B-spline functions are widely used in many industrial applications such as computer graphic representations, computer aided design, computer aided manufacturing, computer numerical control, etc. Recently, there exist some demands, e.g. in reverse engineering (RE) area, to employ B-spline curves for non-trivial cases that include curves with discontinuous points, cusps or turning points from the sampled data. The most challenging task in these cases is in the identification of the number of knots and their respective locations in non-uniform space in the most efficient computational cost. This paper presents a new strategy for fitting any forms of curve by B-spline functions via local algorithm. A new two-step method for fast knot calculation is proposed. In the first step, the data is split using a bisecting method with predetermined allowable error to obtain coarse knots. Secondly, the knots are optimized, for both locations and continuity levels, by employing a non-linear least squares technique. The B-spline function is, therefore, obtained by solving the ordinary least squares problem. The performance of the proposed method is validated by using various numerical experimental data, with and without simulated noise, which were generated by a B-spline function and deterministic parametric functions. This paper also discusses the benchmarking of the proposed method to the existing methods in literature. The proposed method is shown to be able to reconstruct B-spline functions from sampled data within acceptable tolerance. It is also shown that, the proposed method can be applied for fitting any types of curves ranging from smooth ones to discontinuous ones. In addition, the method does not require excessive computational cost, which allows it to be used in automatic reverse engineering applications. [ABSTRACT FROM AUTHOR]

Multi-robot task allocation is one of the main problems to address in order to design a multi-robot system, very especially when robots form coalitions that must carry out tasks before a deadline. A lot of factors affect the performance of these systems and among them, this paper is focused on the physical interference effect, produced when two or more robots want to access the same point simultaneously. To our best knowledge, this paper presents the first formal description of multi-robot task allocation that includes a model of interference. Thanks to this description, the complexity of the allocation problem is analyzed. Moreover, the main contribution of this paper is to provide the conditions under which the optimal solution of the aforementioned allocation problem can be obtained solving an integer linear problem. The optimal results are compared to previous allocation algorithms already proposed by the first two authors of this paper and with a new method proposed in this paper. The results obtained show how the new task allocation algorithms reach up more than an 80% of the median of the optimal solution, outperforming previous auction algorithms with a huge reduction of the execution time. [ABSTRACT FROM AUTHOR]

Methods have been developed for Mendelian randomization that can obtain consistent causal estimates under weaker assumptions than the standard instrumental variable assumptions. The median-based estimator and MR-Egger are examples of such methods. However, these methods can be sensitive to genetic variants with heterogeneous causal estimates. Such heterogeneity may arise from over-dispersion in the causal estimates, or specific variants with outlying causal estimates. In this paper, we develop three extensions to robust methods for Mendelian randomization with summarized data: 1) robust regression (MM-estimation); 2) penalized weights; and 3) Lasso penalization. Methods using these approaches are considered in two applied examples: one where there is evidence of over-dispersion in the causal estimates (the causal effect of body mass index on schizophrenia risk), and the other containing outliers (the causal effect of low-density lipoprotein cholesterol on Alzheimer’s disease risk). Through an extensive simulation study, we demonstrate that robust regression applied to the inverse-variance weighted method with penalized weights is a worthwhile additional sensitivity analysis for Mendelian randomization to provide robustness to variants with outlying causal estimates. The results from the applied examples and simulation study highlight the importance of using methods that make different assumptions to assess the robustness of findings from Mendelian randomization investigations with multiple genetic variants. [ABSTRACT FROM AUTHOR]

Several lifetime distributions have played an important role to fit survival data. However, for some of these models, the computation of maximum likelihood estimators is quite difficult due to presence of flat regions in the search space, among other factors. Several well-known derivative-based optimization tools are unsuitable for obtaining such estimates. To circumvent this problem, we introduce the AdequacyModel computational library version 2.0.0 for the R statistical environment with two major contributions: a general optimization technique based on the Particle Swarm Optimization (PSO) method (with a minor modification of the original algorithm) and a set of statistical measures for assessment of the adequacy of the fitted model. This library is very useful for researchers in probability and statistics and has been cited in various papers in these areas. It serves as the basis for the Newdistns library (version 2.1) published in an impact journal in the area of computational statistics, see . It is also the basis of the Wrapped library (version 2.0), see . A third package making use of the AdequacyModel library can be found in . In addition, the proposed library has proved to be very useful for maximizing log-likelihood functions with complex search regions. The library provides a greater control of the optimization process by introducing a stop criterion based on a minimum number of iterations and the variance of a given proportion of optimal values. We emphasize that the new library can be used not only in statistics but in physics and mathematics as proved in several examples throughout the paper. [ABSTRACT FROM AUTHOR]

As the location trajectory contains more spatial-temporal information about the user, it will be even dangerous for jeopardizing the privacy of the user. In order to cope with the correlation, an algorithm that utilizes the query division had been proposed. In this algorithm, random blocks of query context was used, so as the adversary was obfuscated and difficult to correlate the real result. However, this algorithm fails to dispose the size of each query block, as once same size blocks were obtained by the adversary continuously, so the adversary can regard them as blocks from the same query context, and then obtains the query context to correlate the discrete locations. In view of above conditions, in this paper we propose a fine granularity block division algorithm based on the conception of granularity measurement as well as granularity layer division, so with the help of collaborative users the location privacy of the user will be protected. In this algorithm, the query context will be divided into fine granularity size of information blocks that difficult to be distinguished with others, and then these blocks will be exchanged with other collaborative users to eliminate the difference in block size. In addition, as each block is divided into fine granularity size, the adversary will be difficult to correlate the discrete locations into location trajectory, so the location privacy will be protected. At last, through security analysis and experimental verification, this granularity indistinguishable algorithm is analyzed and verified at both theoretical and practical levels, which further demonstrate the superiority of the proposed algorithm compared with other similar algorithms. [ABSTRACT FROM AUTHOR]

In epidemiology, gerontology, human development and the social sciences, age-period-cohort (APC) models are used to study the variability in trajectories of change over time. A well-known issue exists in simultaneously identifying age, period and birth cohort effects, namely that the three characteristics comprise a perfectly collinear system. That is, since age = period−cohort, only two of these effects are estimable at a time. In this paper, we introduce an alternative framework for considering effects relating to age, period and birth cohort. In particular, instead of directly modeling age in the presence of period and cohort effects, we propose a risk modeling approach to characterize age-related risk (i.e., a hybrid of multiple biological and sociological influences to evaluate phenomena associated with growing older). The properties of this approach, termed risk-period-cohort (RPC), are described in this paper and studied by simulations. We show that, except for pathological circumstances where risk is uniquely determined by age, using such risk indices obviates the problem of collinearity. We also show that the size of the chronological age effect in the risk prediction model associates with the correlation between a risk index and chronological age and that the RPC approach can satisfactorily recover cohort and period effects in most cases. We illustrate the advantages of RPC compared to traditional APC analysis on 27496 individuals from NHANES survey data (2005–2016) to study the longitudinal variability in depression screening over time. Our RPC method has broad implications for examining processes of change over time in longitudinal studies. [ABSTRACT FROM AUTHOR]

In this paper, we explore the (in)efficiency of the continuum Bitcoin-USD market in the period ranging from mid 2010 to early 2019. To deal with, we dynamically analyse the evolution of the self-similarity exponent of Bitcoin-USD daily returns via accurate FD4 approach by a 512 day sliding window with overlapping data. Further, we define the memory indicator by the difference between the self-similarity exponent of Bitcoin-USD series and the self-similarity index of its shuffled series. We also carry out additional analyses via FD4 approach by sliding windows of sizes equal to 64, 128, 256, and 1024 days, and also via FD algorithm for values of q equal to 1 and 2 (and sliding windows equal to 512 days). Moreover, we explored the evolution of the self-similarity exponent of actual S&P500 series via FD4 algorithm by sliding windows of sizes equal to 256 and 512 days. In all the cases, the obtained results were found to be similar to our first analysis. We conclude that the self-similarity exponent of the BTC-USD (resp., S&P500) series stands above 0.5. However, this is not due to the presence of significant memory in the series but to its underlying distribution. In fact, it holds that the self-similarity exponent of BTC-USD (resp., S&P500) series is similar or lower than the self-similarity index of a random series with the same distribution. As such, several periods with significant antipersistent memory in BTC-USD (resp., S&P500) series are distinguished. [ABSTRACT FROM AUTHOR]

In this paper, a new prediction approach is proposed for ocean vessel heave compensation based on echo state network (ESN). To improve the prediction accuracy and enhance the robustness against noise and outliers, a generalized similarity measure called correntropy is introduced into ESN training, which is referred as corr-ESN. An iterative method based on half-quadratic minimization is derived to train corr-ESN. The proposed corr-ESN is used for the heave motion prediction. The experimental results verify its effectiveness. [ABSTRACT FROM AUTHOR]

Computational modeling of engineered gene circuits is an important while challenged task in systems biology. In order to describe and predict the response behaviors of genetic circuits using reliable model parameters, this paper applies an optimal experimental design(OED) method to obtain input signals. In order to obtain informative observations, this study focuses on maximizing Fisher information matrix(FIM)-based optimal criteria and to provide optimal inputs. Furthermore, this paper designs a two-stage optimization with the modified E-optimal criteria and applies harmony search(HS)-based OED algorithm to minimize estimation errors. The proposed optimal identification methodology involves estimation errors and the sample size to pursue a trade-off between estimation accuracy and measurement cost in modeling gene networks. The designed cost function takes two major factors into account, in which experimental costs are proportional to the number of time points. Experiments select two types of synthetic genetic networks to validate the effectiveness of the proposed HS-OED approach. Identification outcomes and analysis indicate the proposed HS-OED method outperforms two candidate OED approaches, with reduced computational effort. [ABSTRACT FROM AUTHOR]

Background and objectives: ECG signal is relatively weak and vulnerable to various noise interferences, such as electromyography. There will be robustness problems when detecting the instantaneous heart rate independently. In some cases, multiple human physiologic parameters are monitored to help in heart rate detection. Methods: In this paper, an algorithm that marks the R-wave peaks with the help of simultaneously recorded continuous blood pressure is proposed and tested on two databases. One database, called the challenge database, is provided by the PhysioNet/Computing in Cardiology Challenge 2014, and the other is the MGH/MF waveform database. Results: The final scores of the proposed algorithm are 97.3% for the challenge database and 96.6% for the MGH/MF waveform database. Conclusions: The experimental results show that this algorithm has high detection accuracy and a relatively strong robustness. [ABSTRACT FROM AUTHOR]

In a recidivism prediction context, there is no consensus on which modeling strategy should be followed for obtaining an optimal prediction model. In previous papers, a range of statistical and machine learning techniques were benchmarked on recidivism data with a binary outcome. However, two important tree ensemble methods, namely gradient boosting and random forests were not extensively evaluated. In this paper, we further explore the modeling potential of these techniques in the binary outcome criminal prediction context. Additionally, we explore the predictive potential of classical statistical and machine learning methods for censored time-to-event data. A range of statistical manually specified statistical and (semi-)automatic machine learning models is fitted on Dutch recidivism data, both for the binary outcome case and censored outcome case. To enhance generalizability of results, the same models are applied to two historical American data sets, the North Carolina prison data. For all datasets, (semi-) automatic modeling in the binary case seems to provide no improvement over an appropriately manually specified traditional statistical model. There is however evidence of slightly improved performance of gradient boosting in survival data. Results on the reconviction data from two sources suggest that both statistical and machine learning should be tried out for obtaining an optimal model. Even if a flexible black-box model does not improve upon the predictions of a manually specified model, it can serve as a test whether important interactions are missing or other misspecification of the model are present and can thus provide more security in the modeling process. [ABSTRACT FROM AUTHOR]

This paper proposes a mixture regression model-based method for drug sensitivity prediction. The proposed method explicitly addresses two fundamental issues in drug sensitivity prediction, namely, population heterogeneity and feature selection pertaining to each of the subpopulations. The mixture regression model is estimated using the imputation-conditional consistency algorithm, and the resulting estimator is consistent. This paper also proposes an average-BIC criterion for determining the number of components for the mixture regression model. The proposed method is applied to the CCLE dataset, and the numerical results indicate that the proposed method can make a drastic improvement over the existing ones, such as random forest, support vector regression, and regularized linear regression, in both drug sensitivity prediction and feature selection. The p-values for the comparisons in drug sensitivity prediction can reach the order O(10−8) or lower for the drugs with heterogeneous populations. [ABSTRACT FROM AUTHOR]

Metabolic models can estimate intrinsic product yields for microbial factories, but such frameworks struggle to predict cell performance (including product titer or rate) under suboptimal metabolism and complex bioprocess conditions. On the other hand, machine learning, complementary to metabolic modeling necessitates large amounts of data. Building such a database for metabolic engineering designs requires significant manpower and is prone to human errors and bias. We propose an approach to integrate data-driven methods with genome scale metabolic model for assessment of microbial bio-production (yield, titer and rate). Using engineered E. coli as an example, we manually extracted and curated a data set comprising about 1200 experimentally realized cell factories from ~100 papers. We furthermore augmented the key design features (e.g., genetic modifications and bioprocess variables) extracted from literature with additional features derived from running the genome-scale metabolic model iML1515 simulations with constraints that match the experimental data. Then, data augmentation and ensemble learning (e.g., support vector machines, gradient boosted trees, and neural networks in a stacked regressor model) are employed to alleviate the challenges of sparse, non-standardized, and incomplete data sets, while multiple correspondence analysis/principal component analysis are used to rank influential factors on bio-production. The hybrid framework demonstrates a reasonably high cross-validation accuracy for prediction of E.coli factory performance metrics under presumed bioprocess and pathway conditions (Pearson correlation coefficients between 0.8 and 0.93 on new data not seen by the model). [ABSTRACT FROM AUTHOR]

In the context of generalized linear models (GLMs), interactions are automatically induced on the natural scale of the data. The conventional approach to measuring effects in GLMs based on significance testing (e.g. the Wald test or using deviance to assess model fit) is not always appropriate. The objective of this paper is to demonstrate the limitations of these conventional approaches and to explore alternative strategies for determining the importance of effects. The paper compares four approaches to determining the importance of effects in the GLM using 1) the Wald statistic, 2) change in deviance (model fitting criteria), 3) Bayesian GLM using vaguely informative priors and 4) Bayesian Model Averaging analysis. The main points in this paper are illustrated using an example study, which examines the risk factors for cyber abuse victimization, and are further examined using a simulation study. Analysis of our example dataset shows that, in terms of a logistic GLM, the conventional methods using the Wald test and the change in deviance can produce results that are difficult to interpret; Bayesian analysis of GLM is a suitable alternative, which is enhanced with prior knowledge about the direction of the effects; and Bayesian Model Averaging (BMA) is especially suited for new areas of research, particularly in the absence of theory. We recommend that social scientists consider including BMA in their standard toolbox for analysis of GLMs. [ABSTRACT FROM AUTHOR]

This paper proposes a method to predict fluctuations in the prices of cryptocurrencies, which are increasingly used for online transactions worldwide. Little research has been conducted on predicting fluctuations in the price and number of transactions of a variety of cryptocurrencies. Moreover, the few methods proposed to predict fluctuation in currency prices are inefficient because they fail to take into account the differences in attributes between real currencies and cryptocurrencies. This paper analyzes user comments in online cryptocurrency communities to predict fluctuations in the prices of cryptocurrencies and the number of transactions. By focusing on three cryptocurrencies, each with a large market size and user base, this paper attempts to predict such fluctuations by using a simple and efficient method. [ABSTRACT FROM AUTHOR]

With the increasing penetration of power electronic equipment in modern residential distribution systems, harmonics mitigation through the distributed generation (DG) interfacing converters has received significant attention. Among recently proposed methods, the so-called active resonance damper (ARD) and harmonic voltage compensator (HVC) based on voltage detection can effectively reduce the harmonic distortions in selected areas of distribution systems. However, it is found out that when traditional ARD algorithm is used to eliminate harmonic current injected by non-linear loads, its performance is constrained by stability problems and can at most eliminate half of the load harmonic currents. Thus, inspired by the duality between ARD and HVC, this paper presents a novel improved resistive active power filter (R-APF) algorithm based on integral-decoupling control. The design guideline for its parameters is then investigated through carefully analyzing the closed-loop poles’ trajectory. Computer studies demonstrate that the proposed algorithm can effectively mitigate the load harmonic currents and its performance is much better than traditional ARD based on proportional control. [ABSTRACT FROM AUTHOR]

As an important factor for improving recommendations, time information has been introduced to model users’ dynamic preferences in many papers. However, the sequence of users’ behaviour is rarely studied in recommender systems. Due to the users’ unique behavior evolution patterns and personalized interest transitions among items, users’ similarity in sequential dimension should be introduced to further distinguish users’ preferences and interests. In this paper, we propose a new collaborative filtering recommendation method based on users’ interest sequences (IS) that rank users’ ratings or other online behaviors according to the timestamps when they occurred. This method extracts the semantics hidden in the interest sequences by the length of users’ longest common sub-IS (LCSIS) and the count of users’ total common sub-IS (ACSIS). Then, these semantics are utilized to obtain users’ IS-based similarities and, further, to refine the similarities acquired from traditional collaborative filtering approaches. With these updated similarities, transition characteristics and dynamic evolution patterns of users’ preferences are considered. Our new proposed method was compared with state-of-the-art time-aware collaborative filtering algorithms on datasets MovieLens, Flixster and Ciao. The experimental results validate that the proposed recommendation method is effective and outperforms several existing algorithms in the accuracy of rating prediction. [ABSTRACT FROM AUTHOR]

Penalized selection criteria like AIC or BIC are among the most popular methods for variable selection. Their theoretical properties have been studied intensively and are well understood, but making use of them in case of high-dimensional data is difficult due to the non-convex optimization problem induced by L0 penalties. In this paper we introduce an adaptive ridge procedure (AR), where iteratively weighted ridge problems are solved whose weights are updated in such a way that the procedure converges towards selection with L0 penalties. After introducing AR its specific shrinkage properties are studied in the particular case of orthogonal linear regression. Based on extensive simulations for the non-orthogonal case as well as for Poisson regression the performance of AR is studied and compared with SCAD and adaptive LASSO. Furthermore an efficient implementation of AR in the context of least-squares segmentation is presented. The paper ends with an illustrative example of applying AR to analyze GWAS data. [ABSTRACT FROM AUTHOR]

In the theory of belief functions, the approximation of a basic belief assignment (BBA) is for reducing the high computational cost especially when large number of focal elements are available. In traditional BBA approximation approaches, a focal element’s own characteristics such as the mass assignment and the cardinality, are usually used separately or jointly as criteria for the removal of focal elements. Besides the computational cost, the distance between the original BBA and the approximated one is also concerned, which represents the loss of information in BBA approximation. In this paper, an iterative approximation approach is proposed based on maximizing the closeness, i.e., minimizing the distance between the approximated BBA in current iteration and the BBA obtained in the previous iteration, where one focal element is removed in each iteration. The iteration stops when the desired number of focal elements is reached. The performance evaluation approaches for BBA approximations are also discussed and used to compare and evaluate traditional BBA approximations and the newly proposed one in this paper, which include traditional time-based way, closeness-based way and new proposed ones. Experimental results and related analyses are provided to show the rationality and efficiency of our proposed new BBA approximation. [ABSTRACT FROM AUTHOR]

Research: The body composition model is closely related to the physiological characteristics of the human body. At the same time there can be a large number of physiological characteristics, many of which may be redundant or irrelevant. In existing human physiological feature selection algorithms, it is difficult to overcome the impact that redundancy and irrelevancy may have on human body composition modeling. This suggests a role for selection algorithms, where human physiological characteristics are identified using a combination of filtering and improved clustering. To do this, a feature filtering method based on Hilbert-Schmidt dependency criteria is first of all used to eliminate irrelevant features. After this, it is possible to use improved Chameleon clustering to increase the combination of sub-clusters amongst the characteristics, thereby removing any redundant features to obtain a candidate feature set for human body composition modeling. Method We report here on the use of an algorithm to filter the characteristic parameters in INBODY770 (this paper used INBODY 770 as body composition analyzer.) measurement data, which has three commonly-used impedance bands (1 kHZ, 250 kHZ, 500 kHZ). This algorithm is able to filter out parameters that have a low correlation with body composition BFM. The algorithm is also able to draw upon improved clustering techniques to reduce the initial feature set from 29 parameters to 10 parameters for any parameters of the 250 kHZ band that remain after filtering. In addition, we also examined the impact of different sample sizes on feature selection. Result: The proposed algorithm is able to remove irrelevant and redundant features and the resulting correlation between the model and the body composition (BFM which is a whole body fat evaluation can better assess the body's overall fat and muscle composition.) is 0.978, thereby providing an improved model for prediction with a relative error of less than 0.12. [ABSTRACT FROM AUTHOR]

In this paper, a new method is proposed for prediction of ship roll motion based on extreme learning machine (ELM). To improve the prediction accuracy and avoid over or under fitting, two techniques are adopted to select the appropriate structure of ELM. First, the inputs of the ELM are selected from the roll motion time series using Lipschitz quotient method. Second, the number of hidden layer nodes is determined via ℓ1 regularized technique. Finally, the ℓ1 regularized ELM is solved by least angle regression (LAR) algorithm. The effectiveness of the proposed method is demonstrated by ship roll motion prediction experiments based on the real measured ship roll motion time series. [ABSTRACT FROM AUTHOR]

In clinical neuropsychology the cognitive abilities of neurological patients are commonly estimated using well-established paper-based tests. Typically, scores on some tests remain relatively well preserved, whilst others exhibit a significant and disproportionate decline. Scores on those tests that measure preserved cognitive functions (so-called ‘hold’ tests) may be used to estimate premorbid abilities, including scores in non-hold tests that would have been expected prior to the onset of cognitive impairment. Many hold tests entail word reading, with each word being graded as correctly or incorrectly pronounced. Inevitably, such tests are likely to contain words that provide little or no diagnostic power (i.e., can be eliminated without negatively affecting prediction accuracy). In this paper, a genetic algorithm is developed and demonstrated, using n = 92 neurologically healthy participants, to identify optimal word subsets from the National Adult Reading Test that minimize the mean error in predicting the most widely used clinical measure of IQ and cognitive ability, the Wechsler Adult Intelligence Scale Fourth Edition IQ. In addition to requiring only 17–20 of the original 50 words (suggesting that this test could be revised to be up to 66% shorter) and minimizing mean prediction error, the algorithm increases the proportion of the variance in the predicted variable explained in comparison to using all words (from r2 = 0.46 to r2 = 0.61). In a clinical setting this would improve estimates of premorbid cognitive function and, if an abbreviated revision to this test were to be adopted, reduce the arduousness of the test for patients. The proposed method is evaluated with jackknifing and leave one out cross validation. The general approach may be used to optimize the relationship between any two psychological tests by finding the question subset in one test that minimizes the prediction error in a second test by training the genetic algorithm using data collected from participants upon whom both tests have been administered. This approach may also be used to develop new predictive tests, since it provides a method to identify an optimal subset of a set of candidate questions (for which empirical data have been collected) that maximizes prediction accuracy and the proportion of variance in the predicted variable that can be explained. [ABSTRACT FROM AUTHOR]

The research about unmanned aerial vehicle (UAV) swarm has developed rapidly in recent years, especially the UAV swarm with sensors which is becoming common means of achieving situational awareness. Due to inadequate researches of the UAV swarm with complex control structure currently, we propose a patrolling task planning algorithm for the UAV swarm with double-layer centralized control structure under the uncertain and dynamic environment. The main objective of the UAV swarm is to collect environment information as much as possible. To summarized, the primary contributions of this paper are as follows. We first define the patrolling problem. After that, the patrolling problem is modeled as the Partially Observable Markov Decision Process (POMDP) problem. Building upon this, we put forward a myopic and scalable online task planning algorithm. The algorithm contains online heuristic function, sequential allocation method, and the mechanism of bottom-up information flow and top-down command flow, reducing the computation complexity effectively. Moreover, as the number of control layers increases, this algorithm guarantees the performance without increasing the computation complexity for the swarm leader. Finally, we empirically evaluate our algorithm in the specific scenarios. [ABSTRACT FROM AUTHOR]

Web service has become irreplaceable for service-oriented application in both academia and industry in recent years. Quality of Service (QoS) is used to describe the nonfunctional characteristics of Web service. Identifying Web service QoS is crucial for service-oriented application designers because service users may obtain very different QoS performance of the same service in the client-side due to dynamic changes of Internet environment as well as user context. However, evaluating QoS performance of a large scale of Web services requires considerable time and resources in real-world. Existing methods can make a personalized prediction for average QoS values by employing historical data but fail to take into consideration the fluctuation feature of Web service QoS values. To address this issue, this paper proposes a novel method for personalized QoS prediction of dynamic Web Services. First, a novel approach is used to extract feature points of QoS sequences and dynamic time warping distance is used to compute the similarity instead of Euclidean distance. By finding the most similar QoS sequences of the target QoS sequence, the missing QoS values can be predicted without extra Web services invoking. To validate our method, we conduct a large number of experiments based on real-world Web service QoS data set. The experimental studies show that our method has higher accuracy rate compared with the existing methods. [ABSTRACT FROM AUTHOR]

This paper addresses the overlearning problem in the independent component analysis (ICA) used for the removal of muscular artifacts from electroencephalographic (EEG) records. We note that for short EEG records with high number of channels the ICA fails to separate artifact-free EEG and muscular artifacts, which has been previously attributed to the phenomenon called overlearning. We address this problem by projecting an EEG record into several subspaces with a lower dimension, and perform the ICA on each subspace separately. Due to a reduced dimension of the subspaces, the overlearning is suppressed, and muscular artifacts are better separated. Once the muscular artifacts are removed, the signals in the individual subspaces are combined to provide an artifact free EEG record. We show that for short signals and high number of EEG channels our approach outperforms the currently available ICA based algorithms for muscular artifact removal. The proposed technique can efficiently suppress ICA overlearning for short signal segments of high density EEG signals. [ABSTRACT FROM AUTHOR]

Background: As statisticians develop new methodological approaches, there are many factors that influence whether others will utilize their work. This paper is a bibliometric study that identifies and quantifies associations between characteristics of new biostatistics methods and their citation counts. Of primary interest was the association between numbers of citations and whether software code was available to the reader. Methods: Statistics journal articles published in 2010 from 35 statistical journals were reviewed by two biostatisticians. Generalized linear mixed models were used to determine which characteristics (author, article, and journal) were independently associated with citation counts (as of April 1, 2017) in other peer-reviewed articles. Results: Of 722 articles reviewed, 428 were classified as new biostatistics methods. In a multivariable model, for articles that were not freely accessible on the journal’s website, having code available appeared to offer no boost to the number of citations (adjusted rate ratio = 0.96, 95% CI = 0.74 to 1.24, p = 0.74); however, for articles that were freely accessible on the journal’s website, having code available was associated with a 2-fold increase in the number of citations (adjusted rate ratio = 2.01, 95% CI = 1.30 to 3.10, p = 0.002). Higher citation rates were also associated with higher numbers of references, longer articles, SCImago Journal Rank indicator (SJR), and total numbers of publications among authors, with the strongest impact on citation rates coming from SJR (rate ratio = 1.21 for a 1-unit increase in SJR; 95% CI = 1.11 to 1.32). Conclusion: These analyses shed new insight into factors associated with citation rates of articles on new biostatistical methods. Making computer code available to readers is a goal worth striving for that may enhance biostatistics knowledge translation. [ABSTRACT FROM AUTHOR]

Lack of unallocated spectrum and increasing demand for bandwidth in wireless networks is forcing new devices and technologies to share frequency bands. Spectrum sensing is a key enabler for frequency sharing and there is a large body of existing work on signal detection methods. However a unified methodology that would be suitable for objective comparison of detection methods based on experimental evaluations is missing. In this paper we propose such a methodology comprised of seven steps that can be applied to evaluate methods in simulation or practical experiments. Using the proposed methodology, we perform the most comprehensive experimental evaluation of signal detection methods to date: we compare energy detection, covariance-based and eigenvalue-based detection and cyclostationary detection. We measure minimal detectable signal power, sensitivity to noise power changes and computational complexity using an experimental setup that covers typical capabilities from low-cost embedded to high-end software defined radio devices. Presented results validate our premise that a unified methodology is valuable in obtaining reliable and reproducible comparisons of signal detection methods. [ABSTRACT FROM AUTHOR]

In business replenishment, discount offers of multi-item may either provide different discount schedules with a single discount type, or provide schedules with multiple discount types. The paper investigates the joint effects of multiple discount schemes on the decisions of multi-item joint replenishment. In this paper, a joint replenishment problem (JRP) model, considering three discount (all-unit discount, incremental discount, total volume discount) offers simultaneously, is constructed to determine the basic cycle time and joint replenishment frequencies of multi-item. To solve the proposed problem, a heuristic algorithm is proposed to find the optimal solutions and the corresponding total cost of the JRP model. Numerical experiment is performed to test the algorithm and the computational results of JRPs under different discount combinations show different significance in the replenishment cost reduction. [ABSTRACT FROM AUTHOR]