Search

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. © 2019 Howison et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Research paper recommenders emerged over the last decade to ease finding publications relating to researchers' area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user's expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list.

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a "dying" paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing "offspring". Practically, this might be used to trace the successive published milestones of a research field., SCOPUS: ar.j, info:eu-repo/semantics/published

We implemented three recently proposed approaches to the identification of overlapping and hierarchical substructures in graphs and applied the corresponding algorithms to a network of 492 information-science papers coupled via their cited sources. The thematic substructures obtained and overlaps produced by the three hierarchical cluster algorithms were compared to a content-based categorisation, which we based on the interpretation of titles and keywords. We defined sets of papers dealing with three topics located on different levels of aggregation: h-index, webometrics, and bibliometrics. We identified these topics with branches in the dendrograms produced by the three cluster algorithms and compared the overlapping topics they detected with one another and with the three pre-defined paper sets. We discuss the advantages and drawbacks of applying the three approaches to paper networks in research fields., Comment: 18 pages, 9 figures

The soybean cyst nematode (SCN), Heterodera glycines, is the most damaging pathogen of soybeans in the United States. To assess the severity of nematode infestations in the field, SCN egg population densities are determined. Cysts (dead females) of the nematode must be extracted from soil samples and then ground to extract the eggs within. Sucrose centrifugation commonly is used to separate debris from suspensions of extracted nematode eggs. We present a method using OptiPrep as a density gradient medium with improved separation and recovery of extracted eggs compared to the sucrose centrifugation technique. Also, computerized methods were developed to automate the identification and counting of nematode eggs from the processed samples. In one approach, a high-resolution scanner was used to take static images of extracted eggs and debris on filter papers, and a deep learning network was trained to identify and count the eggs among the debris. In the second approach, a lensless imaging setup was developed using off-the-shelf components, and the processed egg samples were passed through a microfluidic flow chip made from double-sided adhesive tape. Holographic videos were recorded of the passing eggs and debris, and the videos were reconstructed and processed by custom software program to obtain egg counts. The performance of the software programs for egg counting was characterized with SCN-infested soil collected from two farms, and the results using these methods were compared with those obtained through manual counting.

In this paper, a two-stage filter for removing salt-and-pepper noise using noise detector based on characteristic difference parameter and adaptive directional mean filter is proposed. The first stage firstly detects the noise corrupted pixels by combining characteristic difference parameter and gray level extreme, then develops an improved adaptive median filter to firstly restore them. The second stage introduces a restoration scheme to further restore the noise corrupted pixels, which firstly divides them into two types and then applies different restoration skills for the pixels based on the classification result. One type of pixels is restored by the mean filter and the other type of pixels is restored by the proposed adaptive directional mean filter. The new filter firstly adaptively selects the optimal filtering window and direction template, then replaces the gray level of noise corrupted pixel by the mean value of pixels on the optimal template. Experimental results show that the proposed filter outperforms many existing main filters in terms of noise suppression and detail preservation.

Choice tests are a standard method to determine preferences in bio-assays, e.g. for food types and food additives such as bait attractants and toxicants. Choice between food additives can be determined only when the food substrate is sufficiently homogeneous. This is difficult to achieve for wood eating organisms as wood is a highly variable biological material, even within a tree species due to the age of the tree (e.g. sapwood vs. heartwood), and components therein (sugar, starch, cellulose and lignin). The current practice to minimise variation is to use wood from the same tree, yet the variation can still be large and the quantity of wood from one tree may be insufficient. We used wood samples of identical volume from multiple sources, measured three physical properties (dry weight, moisture absorption and reflected light intensity), then ranked and clustered the samples using fuzzy c-means clustering. A reverse analysis of the clustered samples found a high correlation between their physical properties and their source of origin. This suggested approach allows a quantifiable, consistent, repeatable, simple and quick method to maximize control over similarity of wood used in choice tests. © 2014 Oberst et al.

This paper aims to explore several ways to construct a scientific and comprehensive early warning system (EWS) for local government debt risk in China. In order to achieve this goal, this paper studies the local government debt risk from multiple perspectives, i.e., individual risk, contagion risk, static risk and dynamic risk. Firstly, taking China’s 30 provinces over the period of 2010~ 2018 as a sample, this paper establishes early warning indicators for individual risk of local government debt, and uses the network model to establish early warning indicators for contagion risk of local government debt. Then, this paper applies the criteria importance though intercrieria correlation (CRITIC) method and coefficient of variation method to obtain the proxy variable Ⅰ, which combines the above two risks. Secondly, based on the proxy variable Ⅰ, both the Markov-switching autoregressive (MS-AR) model and coefficient of variation method are used to obtain the proxy variable Ⅱ, which comprehensively considers the individual risk, contagion risk, static risk and dynamic risk of local government debt. Finally, machine learning algorithms are adopted to generalize the EWS designed in this paper. The results show that: (1) From different perspectives of local government debt risk, the list of provinces that require early warning is different; (2) The support vector machines can well generalize our EWS.

Transmission lines are most prone to faults in the transmission system, so high-precision fault diagnosis is very important for quick troubleshooting. There are some problems in current intelligent fault diagnosis research methods, such as difficulty in extracting fault features accurately, low fault recognition accuracy and poor fault tolerance. In order to solve these problems, this paper proposes an intelligent fault diagnosis method for high voltage direct current transmission lines (HVDC) based on Gramian angular difference field (GADF) domain and improved convolutional neural network (VGG16). This method first performs variational modal decomposition (VMD) on the original fault voltage signal, and then uses the correlation coefficient method to select the appropriate intrinsic mode function (IMF) component, and converts it into a two-dimensional image using the Gramian Angular Difference Field(GADF). Finally, the improved VGG16 network is used to extract and classify fault features adaptively to realize fault diagnosis. In order to improve the performance of the VGG16 fault diagnosis model, batch normalization, dense connection and global average pooling techniques are introduced. The comparative experimental results show that the model proposed in this paper can further identify fault features and has a high fault diagnosis accuracy. In addition, the method is not affected by fault type, transitional resistance and fault distance, has good anti-interference ability, strong fault tolerance, and has great potential in practical applications.

In order to further improve the accuracy of the video-based behavior recognition method, an effective behavior recognition method in the video session using convolutional neural network is proposed. Specifically, by adding the target detection phase before the behavior recognition algorithm, the body region in the video can be accurately extracted to reduce the interference of redundant and unnecessary background noises, and at the same time, the inappropriate images can be replaced, which has reached the role of balance background trade-off, and finally, the neural network can learn the human behavior information with emphasis. By adding fragmentation and stochastic sampling, the long-time time-domain modeling of the whole video session can be established, so that the model can obtain video-level expression ability. Finally, the improved loss function is used for behavior recognition to solve the problem of classification difficulty and possible sample imbalance. In addition, we conducted the hyperparametric experiment, the ablation experiment and the contrast experiment on different open source and benchmark datasets. Compared with other commonly used behavior recognition algorithms, the experimental results verify the effectiveness of the proposed method. In addition, the related deep learning-based methods used in behavior recognition are reviewed at the beginning of this paper, and the challenges in behavior recognition and future research directions are prospected at the end of this paper, which will undoubtedly play a double role in the work of later researchers.

Varieties of raisins are diverse, and different varieties have different nutritional properties and commercial value. In this paper, we propose a method to identify different varieties of raisins by combining near-infrared (NIR) spectroscopy and machine learning algorithms. The direct averaging of the spectra taken for each sample may reduce the experimental data and affect the extraction of spectral features, thus limiting the classification results, due to the different substances of grape skins and flesh. Therefore, this experiment proposes a method to fuse the spectral features of pulp and peel. In this experiment, principal component analysis (PCA) was used to extract baseline corrected features, and linear models of k-nearest neighbor (KNN) and linear discriminant analysis (LDA) and nonlinear models of back propagation (BP), support vector machine with genetic algorithm (GA-SVM), grid search-support vector machine (GS-SVM) and particle swarm optimization with support vector machine (PSO- SVM) coupling were used to classify. This paper compared the results of four experiments using only skin spectrum, only flesh spectrum, average spectrum of skin and flesh, and their spectral feature fusion. The experimental results showed that the accuracy and Macro-F1 score after spectral feature fusion were higher than the other three experiments, and GS-SVM had the highest accuracy and Macro-F1 score of 94.44%. The results showed that feature fusion can improve the performance of both linear and nonlinear models. This may provide a new strategy for acquiring spectral data and improving model performance in the future. The code is available at https://github.com/L-ain/Source.

In this paper, a dynamic update algorithm of double scrambling-DNA row and column closed loop based on chaotic system is proposed. The classical scrambling and diffusion structure are used in the whole process. In the scrambling stage, a new pixel reconstruction method is proposed by combining the Hilbert curve with Knuth-Durstenfeld shuffle algorithm to overcome the shortcoming of nearby storage of Hilbert curve. This method reconstructs the pixel matrix of one-dimensional vector according to the Hilbert curve coding method, and achieves good scrambling effect, while reducing its time complexity and space complexity. In the diffusion stage, combining the plaintext row, the ciphertext row and the key row, and taking advantage of the parallel computing power and high storage density of the DNA encoding, the existing block diffusion operation is improved, and the two-round diffusion of the DNA encoding is proposed. When the last line of ciphertext is generated, the first line of ciphertext is updated and the closed-loop dynamic update of the encryption system is realized. Finally, SHA-256 is used to give the secret key and calculate the initial value of the chaotic system. The simulation results show that the “double scrambling-DNA row and column closed loop dynamic” update algorithm proposed in this paper can effectively improve the efficiency of information transmission and have high security.

Sleep staging is the basis of sleep evaluation and a key step in the diagnosis of sleep-related diseases. Despite being useful, the existing sleep staging methods have several disadvantages, such as relying on artificial feature extraction, failing to recognize temporal sequence patterns in the long-term associated data, and reaching the accuracy upper limit of sleep staging. Hence, this paper proposes an automatic Electroencephalogram (EEG) sleep signal staging model, which based on Multi-scale Attention Residual Nets (MAResnet) and Bidirectional Gated Recurrent Unit (BiGRU). The proposed model is based on the residual neural network in deep learning. Compared with the traditional residual learning module, the proposed model additionally uses the improved channel and spatial feature attention units and convolution kernels of different sizes in parallel at the same position. Thus, multiscale feature extraction of the EEG sleep signals and residual learning of the neural networks is performed to avoid network degradation. Finally, BiGRU is used to determine the dependence between the sleep stages and to realize the automatic learning of sleep data staging features and sleep cycle extraction. According to the experiment, the classification accuracy and kappa coefficient of the proposed method on sleep-EDF data set are 84.24% and 0.78, which are respectively 0.24% and 0.21 higher than the traditional residual net. At the same time, this paper also verified the proposed method on UCD and SHHS data sets, and the figure of classification accuracy is 79.34% and 81.6%, respectively. Compared to related existing studies, the recognition accuracy is significantly improved, which validates the effectiveness and generalization performance of the proposed method.

The bin packing problem has a wide range of applications in industry. With the upgrade of the task difficulty, the traditional 2d rectangular layout algorithm can no longer meet the needs of modern industry, such as express packing task and exoplanet ore collection task. The express or ore samples come in heterogeneous shapes so they cannot all be treated as rectangular pieces. In this paper, we propose a three-stage method called covering, corner-searching and occupying (C,S&O) to solve the two-dimensional multishape part packing problem. The objective of the packing problem variant is to ensure maximum use of the raw material and minimize the trim loss. The algorithm cannot make use of information about the sequence of future objects that are going to arrive, only knowing the shape and size of the coming one, and the coming part must be packed into the bin immediately after its arrival without buffering or readjusting. The method of C,S&O hybridizes the idea of “gold corners, silver edges and grass belly” in the Chinese game Go and the method of finding picture corners in machine vision. In the first stage, the rectangular bin and the coming part are transformed into matrix representation, and generating the position matrix that indicates possible ways of packing the part into the bin. In the second stage, the suitable layout position of the coming part is obtained using machine vision image processing technology for reference. The third stage is calculating the environment matching degree to determine the current optimal placement orientation. In order to facilitate the display of the simulation results, only three shapes of parts are considered in the simulation, rectangle, circle and triangle. The experimental results show the effectiveness of this method. Consulting the literature, it is found that this paper is the first to propose a layout method for multishape manufacturing parts.

In the paper, we proposed a deep learning-based industrial equipment detection algorithm ROMS R-CNN (Rotation Occlusion Multi-Scale Region-CNN). It can solve the problem of inaccurate detection of industrial equipment under complex working conditions such as multi-scale ratio, rotation tilt, occlusion and overlap. The method proposed in this paper first is to construct the MobileNetV2 as the feature pyramid network, and then to combine high semantic information with high resolution information solved industrial equipment detection of different scales. Secondly, a specific rotation anchor scheme is proposed, and the data set is clustered through the k-means algorithm to obtain a specific aspect ratio. Combined with the rotation angle, a rotation anchor of any direction and size is generated to solve the problem of easy tilting of industrial equipment. Finally, a Non-Maximum Suppression algorithm with penalty factors is introduced to solve the overlapping in industrial equipment detection. The experimental results in common industrial equipment detection show that this method is better than other algorithms, significantly improves the missed detection and false detection, and the mAP reaches 0.939.

In this paper, we propose methods for functional predictor selection and the estimation of smooth functional coefficients simultaneously in a scalar-on-function regression problem under high-dimensional multivariate functional data setting. In particular, we develop two methods for functional group-sparse regression under a generic Hilbert space of infinite dimension. We show the convergence of algorithms and the consistency of the estimation and the selection (oracle property) under infinite-dimensional Hilbert spaces. Simulation studies show the effectiveness of the methods in both the selection and the estimation of functional coefficients. The applications to the functional magnetic resonance imaging (fMRI) reveal the regions of the human brain related to ADHD and IQ., The R package that is developed for this paper is available at GitHub. See https://github.com/Ali-Mahzarnia/MFSGrp

The determination of the relation between a number and a numerical interval is one of the core problems in the scientific calculation of privacy protection. The calculation of the relationship between two numbers and a numerical interval to protect privacy is also the basic problem of collaborative computing. It is widely used in data queries, location search and other fields. At present, most of the solutions are still fundamentally limited to the integer level, and there are few solutions at the real number level. To solve these problems, this paper first uses Bernoulli inequality generalization and a monotonic function property to extend the solution to the real number level and designs two new protocols based on the homomorphic encryption scheme, which can not only protect the data privacy of both parties involved in the calculation, but also extend the number domain to real numbers. In addition, this paper designs a solution to the confidential cooperative determination problem between real numbers by using the sign function and homomorphism multiplication. Theoretical analysis shows that the proposed solution is safe and efficient. Finally, some extension applications based on this protocol are given.

Parkinson’s disease (PD) is a progressive neurological disorder of the central nervous system that deteriorates motor functions, while it is also accompanied by a large diversity of non-motor symptoms such as cognitive impairment and mood changes, hallucinations, and sleep disturbance. Parkinsonism is evaluated during clinical examinations and appropriate medical treatments are directed towards alleviating symptoms. Tri-axial accelerometers, gyroscopes, and magnetometers could be adopted to support clinicians in the decision-making process by objectively quantifying the patient’s condition. In this context, at-home data collections aim to capture motor function during daily living and unobstructedly assess the patients’ status and the disease’s symptoms for prolonged time periods. This review aims to collate existing literature on PD monitoring using inertial sensors while it focuses on papers with at least one free-living data capture unsupervised either directly or via videotapes. Twenty-four papers were selected at the end of the process: fourteen investigated gait impairments, eight of which focused on walking, three on turning, two on falls, and one on physical activity; ten articles on the other hand examined symptoms, including bradykinesia, tremor, dyskinesia, and motor state fluctuations in the on/off phenomenon. In summary, inertial sensors are capable of gathering data over a long period of time and have the potential to facilitate the monitoring of people with Parkinson’s, providing relevant information about their motor status. Concerning gait impairments, kinematic parameters (such as duration of gait cycle, step length, and velocity) were typically used to discern PD from healthy subjects, whereas for symptoms’ assessment, researchers were capable of achieving accuracies of over 90% in a free-living environment. Further investigations should be focused on the development of ad-hoc hardware and software capable of providing real-time feedback to clinicians and patients. In addition, features such as the wearability of the system and user comfort, set-up process, and instructions for use, need to be strongly considered in the development of wearable sensors for PD monitoring.

The growing popularity of big data analysis and cloud computing has created new big data management standards. Sometimes, programmers may interact with a number of heterogeneous data stores depending on the information they are responsible for: SQL and NoSQL data stores. Interacting with heterogeneous data models via numerous APIs and query languages imposes challenging tasks on multi-data processing developers. Indeed, complex queries concerning homogenous data structures cannot currently be performed in a declarative manner when found in single data storage applications and therefore require additional development efforts. Many models were presented in order to address complex queries Via multistore applications. Some of these models implemented a complex unified and fast model, while others’ efficiency is not good enough to solve this type of complex database queries. This paper provides an automated, fast and easy unified architecture to solve simple and complex SQL and NoSQL queries over heterogeneous data stores (CQNS). This proposed framework can be used in cloud environments or for any big data application to automatically help developers to manage basic and complicated database queries. CQNS consists of three layers: matching selector layer, processing layer, and query execution layer. The matching selector layer is the heart of this architecture in which five of the user queries are examined if they are matched with another five queries stored in a single engine stored in the architecture library. This is achieved through a proposed algorithm that directs the query to the right SQL or NoSQL database engine. Furthermore, CQNS deal with many NoSQL Databases like MongoDB, Cassandra, Riak, CouchDB, and NOE4J databases. This paper presents a spark framework that can handle both SQL and NoSQL Databases. Four scenarios’ benchmarks datasets are used to evaluate the proposed CQNS for querying different NoSQL Databases in terms of optimization process performance and query execution time. The results show that, the CQNS achieves best latency and throughput in less time among the compared systems.

This paper analyzes the option coordination problem of a fresh agricultural product supply chain under two supply chain structures, when the production cost and the loss rate are disrupted simultaneously. This paper provides the explicit option coordination conditions for the disrupted supply chain under two supply chain structures, and then explores the effects of the disruptions and supply chain structure on the option coordination conditions. The results suggest that it is unfavorable to apply the original coordinating contracts without disruptions to coordinate the disrupted supply chain. The coordination of the disrupted supply chain can be achieved with knowledge of the distribution of demand. In two coordinating contracts for the disrupted supply chain, the exercise price is still at the original level without disruptions while the option price deviates from the original level without disruptions. Moreover, the relationships of the coordination conditions in two supply chain structures depend on the value of the profit allocation coefficient. When the profit allocation coefficient exceeds (falls behind) a certain threshold, the option price is set at a higher (lower) value in the supplier-led supply chain structure than in the distributor-led supply chain structure, while the exercise price is set at a lower (higher) value in the supplier-led supply chain structure than in the distributor-led supply chain structure. Finally, the disrupted supply chain with any supply chain structure will perform better in the modified coordinating contracts than in the original coordinating contracts without disruptions.

Distributed Systems architectures are becoming the standard computational model for processing and transportation of information, especially for Cloud Computing environments. The increase in demand for application processing and data management from enterprise and end-user workloads continues to move from a single-node client-server architecture to a distributed multitier design where data processing and transmission are segregated. Software development must considerer the orchestration required to provision its core components in order to deploy the services efficiently in many independent, loosely coupled—physically and virtually interconnected—data centers spread geographically, across the globe. This network routing challenge can be modeled as a variation of the Travelling Salesman Problem (TSP). This paper proposes a new optimization algorithm for optimum route selection using Algorithmic Information Theory. The Kelly criterion for a Shannon-Bernoulli process is used to generate a reliable quantitative algorithm to find a near optimal solution tour. The algorithm is then verified by comparing the results with benchmark heuristic solutions in 3 test cases. A statistical analysis is designed to measure the significance of the results between the algorithms and the entropy function can be derived from the distribution. The tested results shown an improvement in the solution quality by producing routes with smaller length and time requirements. The quality of the results proves the flexibility of the proposed algorithm for problems with different complexities without relying in nature-inspired models such as Genetic Algorithms, Ant Colony, Cross Entropy, Neural Networks, 2opt and Simulated Annealing. The proposed algorithm can be used by applications to deploy services across large cluster of nodes by making better decision in the route design. The findings in this paper unifies critical areas in Computer Science, Mathematics and Statistics that many researchers have not explored and provided a new interpretation that advances the understanding of the role of entropy in decision problems encoded in Turing Machines.

Fin-tech is an emerging field, inspiring revolutionary innovations in the financial field. It may initiate the evolutionary episode of the financial research, where volatility forecasting is a crucial topic in finance. For forecasting volatility, GARCH model is a prevailing model, however, further improvement of the GARCH model is still challenging. In this paper, we demonstrate how Fintech can play a part in volatility forecasting by employing a metaheuristic procedure called Genetic Programming. On the basis, we are able to develop a new volatility forecasting model, which can beat GARCH family models (including GARCH, IGARCH and TGARCH models) in a significant way. Since genetic programming is an evolutionary algorithm based on the principles of natural selection, this innovative work will be a breakthrough point in the financial area. The innovation of this paper demonstrates how GP technology can be applied in the financial field, attempting to explore the volatility forecasting area from the combination of new technology and finance, known as fintech. More importantly, when the formula of volatility forecasting is unknown as we introduce a new factor, namely, the liquidity factor, we unveil that how GP method can be helpful in determining the specific volatility forecasting model format. We thereby exhibit the liquidity effects on volatility forecasting filed from the fintech perspective.

Artificial intelligence (AI) is emerging as a technology at the center of many political, economic, and societal debates. This paper formulates a new AI patent search strategy and applies this to provide a landscape analysis of AI innovation dynamics and technology evolution. The paper uses patent analyses, network analyses, and source path link count algorithms to examine AI spatial and temporal trends, cooperation features, cross-organization knowledge flow and technological routes. Results indicate a growing yet concentrated, non-collaborative and multi-path development and protection profile for AI patenting, with cross-organization knowledge flows based mainly on interorganizational knowledge citation links.

In this paper, we introduce the concept of learning to sense, which aims to emulate a complex characteristic of human reasoning: the ability to monitor and understand a set of interdependent events for decision-making processes. Event datasets are composed of textual data and spatio-temporal features that determine where and when a given phenomenon occurred. In learning to sense, related events are mapped closely to each other in a semantic vector space, thereby identifying that they contain similar contextual meaning. However, learning a semantic vector space that satisfies both textual similarities and spatio-temporal constraints is a crucial challenge for event analysis and sensing. This paper investigates a Semantic Variational Autoencoder (SVAE) to fine-tune pre-trained embeddings according to both textual and spatio-temporal events of the class of interest. Experiments involving more than one hundred sensors show that our SVAE outperforms a competitive one-class classification baseline. Moreover, our proposal provides desirable learning requirements to sense scenarios, such as visualization of the sensor decision function and heat maps with the sensor’s geographic impact.

Recent relation extraction models’ architecture are evolved from the shallow neural networks to natural language model, such as convolutional neural networks or recurrent neural networks to Bert. However, these methods did not consider the semantic information in the sequence or the distance dependence problem, the internal semantic information may contain the useful knowledge which can help relation classification. Focus on these problems, this paper proposed a BERT-based relation classification method. Compare with the existing Bert-based architecture, the proposed model can obtain the internal semantic information between entity pair and solve the distance semantic dependence better. The pre-trained BERT model after fine tuning is used in this paper to abstract the semantic representation of sequence, then adopt the piecewise convolution to obtain semantic information which influence the extraction results. Compare with the existing methods, the proposed method can achieve a better accuracy on relational extraction task because of the internal semantic information extracted in the sequence. While, the generalization ability is still a problem that cannot be ignored, and the numbers of the relationships are difference between different categories. In this paper, the focal loss function is adopted to solve this problem by assigning a heavy weight to less number or hard classify categories. Finally, comparing with the existing methods, the F1 metric of the proposed method can reach a superior result 89.95% on the SemEval-2010 Task 8 dataset.

An effective traffic control strategy will improve travel reliability in urban transportation networks. Lack of coordination between vehicles, however, exacerbates congestion due mainly to frequent stops at unsignalized intersections. It is beneficial to develop a conflict-free cooperation method that collects basic safety message from multiple approaching Connected and Autonomous Vehicles (for short, CAVs) and guarantees efficient unsignalized intersection operations with safe and incident free vehicle maneuvers. This paper proposes an interspersed traffic organization method under controlled constraints. Firstly, relied on shared location technology and considered the operating characteristics of CAVs at unsignalized intersections to detect and analyze traffic conflicts to establish a right-of-way judgment model for CAVs. In order to further ensure the safety and operating efficiency of the vehicle, based on the judgment results of right-of-way judgment model, a vehicle speed guidance model is established for different traffic conditions. Taking the real city standard intersection as the experimental analysis object, through data collection and simulation experiment, the signal control method and the organization method proposed in this paper are compared and analyzed. The results showed that the traffic organization method proposed in this paper improves the operational efficiency of 46%, the average travel time is reduced by 6.54s, which is not only better than the signal control method, but also supports the development of car networking technology.

Current image encryption methods have many shortcomings for the medical image encryption with high resolution, strong correlation and large storage space, and it is difficult to obtain reliable clinically applicable medical images. Therefore, this paper proposes a medical image encryption algorithm based on a new five-dimensional three-leaf chaotic system and genetic operation. And the dynamic analysis of the phase diagram and bifurcation diagram of the five-dimensional three-leaf chaotic system selected in this paper is carried out, and NIST is used to test the randomness of its chaotic sequence. This algorithm follows the diffusion-scrambling framework, especially using the principle of DNA recombination combined with the five-dimensional three-leaf chaotic system to generate a chaotic matrix that participates in the operation. The bit-level DNA mutation operation is introduced in the diffusion, and the scrambling and diffusion effects have been further improved. Algorithm security and randomness have been enhanced. This paper evaluates the efficiency of this algorithm for medical image encryption in terms of security analysis and time performance. Security analysis is carried out from key space, information entropy, histogram, similarity between decrypted image and original image, PSNR, correlation, sensitivity, noise attack, cropping attack and so on. Perform time efficiency analysis from the perspective of time performance. The comparison between this algorithm and the experimental results obtained by some of the latest medical image encryption algorithms shows that this algorithm is superior to the existing medical image encryption algorithms to a certain extent in terms of security and time efficiency.

Reconstruction of network is to infer the relationship among nodes using observation data, which is helpful to reveal properties and functions of complex systems. In view of the low reconstruction accuracy based on small data and the subjectivity of threshold to infer adjacency matrix, the paper proposes two models: the quadratic compressive sensing (QCS) and integer compressive sensing (ICS). Then a combined method (CCS) is given based on QCS and ICS, which can be used on binary-state and multi-state dynamics. It is found that CCS is usually a superior method comparing with compressive sensing, LASSO on several networks with different structures and scales. And it can infer larger node correctly than the other two methods. The paper is conducive to reveal the hidden relationship with small data so that to understand, predicate and control a vast intricate system.

Background As the world’s largest coal producer, China was accounted for about 46% of global coal production. Among present coal mining risks, methane gas (called gas in this paper) explosion or ignition in an underground mine remains ever-present. Although many techniques have been used, gas accidents associated with the complex elements of underground gassy mines need more robust monitoring or warning systems to identify risks. This paper aimed to determine which single method between the PCA and Entropy methods better establishes a responsive weighted indexing measurement to improve coal mining safety. Methods Qualitative and quantitative mixed research methodologies were adopted for this research, including analysis of two case studies, correlation analysis, and comparative analysis. The literature reviewed the most-used multi-criteria decision making (MCDM) methods, including subjective methods and objective methods. The advantages and disadvantages of each MCDM method were briefly discussed. One more round literature review was conducted to search publications between 2017 and 2019 in CNKI. Followed two case studies, correlation analysis and comparative analysis were then conducted. Research ethics was approved by the Shanxi Coking Coal Group Research Committee. Results The literature searched a total of 25,831publications and found that the PCA method was the predominant method adopted, and the Entropy method was the second most widely adopted method. Two weighting methods were compared using two case studies. For the comparative analysis of Case Study 1, the PCA method appeared to be more responsive than the Entropy. For Case Study 2, the Entropy method is more responsive than the PCA. As a result, both methods were adopted for different cases in the case study mine and finally deployed for user acceptance testing on 5 November 2020. Conclusions The findings and suggestions were provided as further scopes for further research. This research indicated that no single method could be adopted as the better option for establishing indexing measurement in all cases. The practical implication suggests that comparative analysis should always be conducted on each case and determine the appropriate weighting method to the relevant case. This research recommended that the PCA method was a dimension reduction technique that could be handy for identifying the critical variables or factors and effectively used in hazard, risk, and emergency assessment. The PCA method might also be well-applied for developing predicting and forecasting systems as it was sensitive to outliers. The Entropy method might be suitable for all the cases requiring the MCDM. There is also a need to conduct further research to probe the causal reasons why the PCA and Entropy methods were applied to each case and not the other way round. This research found that the Entropy method provides higher accuracy than the PCA method. This research also found that the Entropy method demonstrated to assess the weights of the higher dimension dataset was higher sensitivity than the lower dimensions. Finally, the comprehensive analysis indicates a need to explore a more responsive method for establishing a weighted indexing measurement for warning applications in hazard, risk, and emergency assessments.

Accurate visual tracking is a challenging issue in computer vision. Correlation filter (CF) based methods are sought in visual tracking based on their efficiency and high performance. Nonetheless, CF-based trackers are sensitive to partial occlusion, which may reduce their overall performance and even lead to failure in tracking challenge. In this paper, we presented a very powerful tracker based on the kernelized correlation filter tracker (KCF). Firstly, we employ an intelligent multi-part tracking algorithm to improve the overall capability of correlation filter based tracker, especially in partial-occlusion challenges. Secondly, to cope with the problem of scale variation, we employ an effective scale adaptive scheme, which divided the target into four patches and computed the scale factor by finding the maximum response position of each patch via kernelized correlation filter. With this method, the scale computation was transformed into locating the centers of the patches. Thirdly, because the small deviation of the central function value will bring the problem of location ambiguity. To solve this problem, the new Gaussian kernel functions are introduced in this paper. Experiments on the default 51 video sequences in Visual Tracker Benchmark demonstrate that our proposed tracker provides significant improvement compared with the state-of-art trackers.

The Global Navigation Satellite System is vulnerable to interference signals that can potentially disable the system, because the signal strength tends to be very weak. Interference such as jamming, which disables the receiver via excessively high signal strength in the satellite navigation frequency band, and spoofing, which induces the receiver to output erroneous position and time data via signals similar to actual navigation signals, disrupt satellite navigation systems. As the threat of interference is increasing, considerable research effort has been expended in an attempt to deal with it in various ways. Spoofing attacks are especially difficult to detect. This paper deals with a technique to detect a spoofing signal and to mitigate attacks on satellite navigation systems. The satellite navigation signal is influenced by the navigation satellite itself and errors due to environmental factors, and spoofing signal detection should be well reflected in the navigation signal. Especially, in the case of mobile receivers, it is not easy to detect a spoofing signal because the exact position of the receiver cannot be known. To detect a spoofing signal, additional hardware may be required; in some cases, heterogeneous sensors, such as inertial sensors, may be used. The technique introduced in this paper effectively discriminates spoofing signals based only on receiver measurements, without the need for additional devices. It generates test statistics based on the pseudorange, which is the measured value of the receiver position, and detects spoofing signals by setting the monitoring interval according to a “sliding window”. Because the proposed method uses output data and measurements obtained from the receiver, it can be applied to general receivers at low cost.

Compared to the integer-order modeling, the fractional-order modeling can achieve higher accuracy for designing and analyzing the DC-DC power converters. However, its applications in pulse width modulation (PWM) converters are limited due to the computational complexities. In this paper, a modified fractional-order modeling methodology for DC-DC converters is proposed, and its effectiveness is verified on the fractional-order positive Luo converters. Instead of using fractional-order calculus, the proposed methodology analyzes the harmonic components of the PWM converters by utilizing the non-linear vector differential equations of the periodically time-variant system. The final solution of the state variables is composed of two parts: the steady-state solution and the transient solution. The approximate steady state solution can be obtained by using the equivalent small parameter (ESP) method and the harmonic balance theory, while the main part of the transient solution can be obtained according to the explicit Grunwald-Letnikov (GL) approximation. In addition, the influence of the fractional orders on the performance of the DC-DC converters, and on the dynamic behaviors of the fractional-orders systems are also discussed in this paper. Compared to the conventional fractional-order numerical models, the proposed model is able to present the time-domain information more precisely, which helps to better reveal and analyze the non-linear behaviors of the DC-DC converters. The effectiveness of the work is demonstrated by the simulation and experimental results of the equivalent circuits built with fractional-order components.

The rapid increase in the usage of the mobile internet has led to a great expansion of cellular data networks in order to provide better quality of service. However, the cost to expand the cellular network is high. One of the solutions to provide affordable wireless connectivity is the deployment of a WiFi access point to offload users’ data usage. Nevertheless, the frequent and inefficient handover process between the WiFi AP and cellular network, especially when the mobile device is on the go, may degrade the network performance. Mobile devices do not have the intelligence to select the optimal network to enhance the quality of service (QoS). This paper presents an enhanced handover mechanism using mobility prediction (eHMP) to assist mobile devices in the handover process so that users can experience seamless connectivity. eHMP is tested in two wireless architectures, homogeneous and heterogeneous networks. The network performance significantly improved when eHMP is used in a homogeneous network, where the network throughput increases by 106% and the rate of retransmission decreases by 85%. When eHMP is used in a heterogeneous network, the network throughput increases by 55% and the retransmission rate decreases by 75%. The findings presented in this paper reveal that mobility prediction coupled with the multipath protocol can improve the QoS for mobile devices. These results will contribute to a better understanding of how the network service provider can offload traffic to the WiFi network without experiencing performance degradation.

The lensless optical fluid microscopy is of great significance to the miniaturization, portability and low cost development of cell detection instruments. However, the resolution of the cell image collected directly is low, because the physical pixel size of the image sensor is the same order of magnitude as the cell size. To solve this problem, this paper proposes a super-resolution scanning algorithm using a dual-line array sensor and a microfluidic chip. For dual-line array sensor images, the multi-group velocity and acceleration of cells flowing through the line array sensor are calculated. Then the reconstruction model of the super-resolution image is constructed with variable acceleration. By changing the angle between the line array image sensor and the direction of cell flow, the super-resolution image scanning and reconstruction are achieved in both horizontal and vertical directions. In addition, it is necessary to study the row by row extraction algorithm for cell foreground image. In this paper, the dual-line array sensor is implemented by adjusting the acquisition window of the image sensor with a pixel size of 2.2μm. When the tilt angle is 21 degrees, the equivalent pixel size is 0.79μm, improved 2.8 times, and after de-diffraction its average size error was 3.249%. As the angle decreases, the image resolution is higher, but the amount of information is less. This super-resolution scanning algorithm can be integrated on the chip and used with a microfluidic chip to realize on-chip instrument.

This paper studies the inverse kinematics of two non-spherical wrist configurations of painting robot. The simplest analytical solution of orthogonal wrist configuration is deduced in this paper for the first time. For the oblique wrist configuration, there is no analytical solution for the configuration. So it is necessary to solve by general method, which cannot achieve high precision and high speed as analytic solution. Two general methods are optimized in this paper. Firstly, the elimination method is optimized to reduce the solving speed to 20% of the original one, and the completeness of the method is supplemented. Based on the Gauss damped least squares method, a new optimization method is proposed to improve the solving speed. The enhanced step length coefficient is introduced to conduct studies with the machine learning correlation method. It has been proved that, on the basis of ensuring the stability of motion, the number of iterations can be effectively reduced and the average number of iterations can be less than 5 times, which can effectively improve the speed of solution. In the simulation and experimental environment, it is verified.

Understanding the digital jump of bank customers is key to design strategies to bring on board and keep online users, as well as to explain the increasing competition from new providers of financial services (such as BigTech and FinTech). This paper employs a machine learning approach to examine the digitalization process of bank customers using a comprehensive consumer finance survey. By employing a set of algorithms (random forests, conditional inference trees and causal forests) this paper identities the features predicting bank customers’ digitalization process, illustrates the sequence of consumers’ decision-making actions and explores the existence of causal relationships in the digitalization process. Random forests are found to provide the highest performance–they accurately predict 88.41% of bank customers’ online banking adoption and usage decisions. We find that the adoption of digital banking services begins with information-based services (e.g., checking account balance), conditional on the awareness of the range of online services by customers, and then is followed by transactional services (e.g., online/mobile money transfer). The diversification of the use of online channels is explained by the consciousness about the range of services available and the safety perception. A certain degree of complementarity between bank and non-bank digital channels is also found. The treatment effect estimations of the causal forest algorithms confirm causality of the identified explanatory factors. These results suggest that banks should address the digital transformation of their customers by segmenting them according to their revealed preferences and offering them personalized digital services. Additionally, policymakers should promote financial digitalization, designing policies oriented towards making consumers aware of the range of online services available.

Multiscale geometric analysis (MGA) is not only characterized by multi-resolution, time-frequency localization, multidirectionality and anisotropy, but also outdoes the limitations of wavelet transform in representing high-dimensional singular data such as edges and contours. Therefore, researchers have been exploring new MGA-based image compression standards rather than the JPEG2000 standard. However, due to the difference in terms of the data structure, redundancy and decorrelation between wavelet and MGA, as well as the complexity of the coding scheme, so far, no definitive researches have been reported on the MGA-based image coding schemes. In addressing this problem, this paper proposes an image data compression approach using the hidden Markov model (HMM)/pulse-coupled neural network (PCNN) model in the contourlet domain. First, a sparse decomposition of an image was performed using a contourlet transform to obtain the coefficients that show the multiscale and multidirectional characteristics. An HMM was then adopted to establish links between coefficients in neighboring subbands of different levels and directions. An Expectation-Maximization (EM) algorithm was also adopted in training the HMM in order to estimate the state probability matrix, which maintains the same structure of the contourlet decomposition coefficients. In addition, each state probability can be classified by the PCNN based on the state probability distribution. Experimental results show that the HMM/PCNN -contourlet model proposed in this paper leads to better compression performance and offer a more flexible encoding scheme.

This paper employs a solution to the agent-guidance problem in an environment with obstacles, whose avoidance techniques have been extensively used in the last years. There is still a gap between the solution times required to obtain a trajectory and those demanded by real world applications. These usually face a tradeoff between the limited on-board processing performance and the high volume of computing operations demanded by those real-time applications. In this paper we propose a deferred decision-based technique that produces clusters used for obstacle avoidance as the agent moves in the environment, like a driver that, at night, enlightens the road ahead as her/his car moves along a highway. By considering the spatial and temporal relevance of each obstacle throughout the planning process and pruning areas that belong to the constrained domain, one may relieve the inherent computational burden of avoidance. This strategy reduces the number of operations required and increases it on demand, since a computationally heavier problem is tackled only if the simpler ones are not feasible. It consists in an improvement based solely on problem modeling, which, by example, may offer processing times in the same order of magnitude than the lower-bound given by the relaxed form of the problem.

Image encryption is an effective method for protecting private images during communication. In this paper, a novel image encryption method is proposed based on a 5D hyperchaotic system. Since a 5D hyperchaotic system can generate more complex dynamic behavior than a low-dimensional system, it is used in this paper to generate pseudorandom number sequences. The generated sequences are processed to obtain new sequences. The randomness of the new sequences is improved by recombination and rearrangement. The experimental results and theoretical analysis show that the method possesses a large key space and can resist differential attacks, statistical analysis, entropy analysis, clipping attacks and noise attacks. Therefore, it is very secure and can be used for secure communication.

With the development of e-commerce, online shopping has become one of the most important consumer channels. However, the lack of government supervision, insufficient review of e-commerce platforms, illegal sales of online sellers and invalid consumer complaints have led to frequent green product quality problems during online shopping. Therefore, this paper considers that the online seller may be driven by interests, colluding with the e-commerce platform and selling low quality green product. At the same time, we introduce consumer feedback, and take the government supervision department, the online seller and the e-commerce platform as actors of the evolutionary game. In this paper, the evolutionary strategy choices of each actor were analyzed, and the influence of different factors on the evolutionary stability results was explored. Research indicates: firstly, consumer complaints play an indirect regulatory role for the online seller; secondly, the enhancement of the loss-sharing relationship between the online seller and the e-commerce platform can promote the legal operation of the two and prevent collusion; thirdly, the impact of consumer complaints on the choice of the e-commerce platform depends on the government supervision department’s penalty for the e-commerce platform; finally, the e-commerce platform establishes a reasonable reward system, which can make up for the defects of the online seller using advanced technology to avoid punishment. Our paper uses Matlab 2017 for simulation analysis and provides effective advices on how to urge the government supervision department to effectively supervise, promote the e-commerce platform to enhance review, urge the online seller to legal sale, and encourage consumers to legally defend their rights.

With the increase of patients with retinopathy, retinopathy recognition has become a research hotspot. In this article, we describe the etiology and symptoms of three kinds of retinal diseases, including drusen(DRUSEN), choroidal neovascularization(CNV) and diabetic macular edema(DME). In addition, we also propose a hybrid attention mechanism to classify and recognize different types of retinopathy images. In particular, the hybrid attention mechanism proposed in this paper includes parallel spatial attention mechanism and channel attention mechanism. It can extract the key features in the channel dimension and spatial dimension of retinopathy images, and reduce the negative impact of background information on classification results. The experimental results show that the hybrid attention mechanism proposed in this paper can better assist the network to focus on extracting thr fetures of the retinopathy area and enhance the adaptability to the differences of different data sets. Finally, the hybrid attention mechanism achieved 96.5% and 99.76% classification accuracy on two public OCT data sets of retinopathy, respectively.

In this paper, the algebraic topological characteristics of brain networks composed of electroencephalogram(EEG) signals induced by different quality images were studied, and on that basis, a neurophysiological image quality assessment approach was proposed. Our approach acquired quality perception-related neural information via integrating the EEG collection with conventional image assessment procedures, and the physiologically meaningful brain responses to different distortion-level images were obtained by topological data analysis. According to the validation experiment results, statistically significant discrepancies of the algebraic topological characteristics of EEG data evoked by a clear image compared to that of an unclear image are observed in several frequency bands, especially in the beta band. Furthermore, the phase transition difference of brain network caused by JPEG compression is more significant, indicating that humans are more sensitive to JPEG compression other than Gaussian blur. In general, the algebraic topological characteristics of EEG signals evoked by distorted images were investigated in this paper, which contributes to the study of neurophysiological assessment of image quality.

E-documents are carriers of sensitive data, and their security in the open network environment has always been a common problem with the field of data security. Based on the use of encryption schemes to construct secure access control, this paper proposes a fusion data security protection scheme. This scheme realizes the safe storage of data and keys by designing a hybrid symmetric encryption algorithm, a data security deletion algorithm, and a key separation storage method. The scheme also uses file filter driver technology to design a user operation state monitoring method to realize real-time monitoring of user access behavior. In addition, this paper designs and implements a prototype system. Through the verification and analysis of its usability and security, it is proved that the solution can meet the data security protection requirements of sensitive E-documents in the open network environment.

A query optimizer attempts to predict a performance metric based on the amount of time elapsed. Theoretically, this would necessitate the creation of a significant overhead on the core engine to provide the necessary query optimizing statistics. Machine learning is increasingly being used to improve query performance by incorporating regression models. To predict the response time for a query, most query performance approaches rely on DBMS optimizing statistics and the cost estimation of each operator in the query execution plan, which also focuses on resource utilization (CPU, I/O). Modeling query features is thus a critical step in developing a robust query performance prediction model. In this paper, we propose a new framework based on query feature modeling and ensemble learning to predict query performance and use this framework as a query performance predictor simulator to optimize the query features that influence query performance. In query feature modeling, we propose five dimensions used to model query features. The query features dimensions are syntax, hardware, software, data architecture, and historical performance logs. These features will be based on developing training datasets for the performance prediction model that employs the ensemble learning model. As a result, ensemble learning leverages the query performance prediction problem to deal with missing values. Handling overfitting via regularization. The section on experimental work will go over how to use the proposed framework in experimental work. The training dataset in this paper is made up of performance data logs from various real-world environments. The outcomes were compared to show the difference between the actual and expected performance of the proposed prediction model. Empirical work shows the effectiveness of the proposed approach compared to related work.

Fake news is a complex problem that leads to different approaches used to identify them. In our paper, we focus on identifying fake news using its content. The used dataset containing fake and real news was pre-processed using syntactic analysis. Dependency grammar methods were used for the sentences of the dataset and based on them the importance of each word within the sentence was determined. This information about the importance of words in sentences was utilized to create the input vectors for classifications. The paper aims to find out whether it is possible to use the dependency grammar to improve the classification of fake news. We compared these methods with the TfIdf method. The results show that it is possible to use the dependency grammar information with acceptable accuracy for the classification of fake news. An important finding is that the dependency grammar can improve existing techniques. We have improved the traditional TfIdf technique in our experiment.

In the case of a fire, the choice of exit in the highway tunnel is strictly limited by fire location, which seriously affects the evacuation time. A spontaneous or disorderly exit choice might result in a decreased evacuation efficiency and utilization rate of exits. In this paper, we propose a strategy to obtain the optimal exit choice based on fire location during highway tunnel evacuations. In our strategy, first, the vehicle distributions and locations of evacuating occupants are determined in the traffic simulation program VISSIM. The evacuation simulation software BuildingEXODUS is employed to obtain the corresponding parameters of the evacuation process and analyze the impacts of different fire locations on the evacuation time. During the analysis, the optimal productivity statistics (OPS) is selected as the evaluation index. Then, the feature points of the crowding occupants are captured by the fuzzy c-means (FCM) cluster algorithm. Next, based on the feature points, the relationship between the location of the fire and boundary of the optimal exit choice under the optimal OPS is obtained through the polynomial regression model. It is found that the R-squared(R2) and sum of squares for error (SSE) of the polynomial regression model, reflecting the accuracy estimation, are 98.02% and 2.79×10−4, respectively. Moreover, different fire locations impact the evacuation time of tunnel entrance and evacuation passageway. This paper shows that the location of the fire and boundary of optimal exit choice have a negative linear correlation. Taking the fire 110 m away from the evacuation passageway as an example, the OPS of our strategy can be decreased by 35.6% when compared with no strategies. Our proposed strategy could be applied to determine the location of variable evacuation signs to help evacuating occupants make optimal exit choices.

In this paper, we propose a hierarchical statistical model for a single repairable system subject to several failure modes (competing risks). The paper describes how complex engineered systems may be modelled hierarchically by use of Bayesian methods. It is also assumed that repairs are minimal and each failure mode has a power-law intensity. Our proposed model generalizes another one already presented in the literature and continues the study initiated by us in another published paper. Some properties of the new model are discussed. We conduct statistical inference under an objective Bayesian framework. A simulation study is carried out to investigate the efficiency of the proposed methods. Finally, our methodology is illustrated by two practical situations currently addressed in a project under development arising from a partnership between Petrobras and six research institutes.

Peer-to-Peer (P2P) lending provides convenient and efficient financing channels for small and medium-sized enterprises and individuals, and therefore it has developed rapidly since entering the market. However, due to the imperfection of the credit system and the influence of cyberspace restrictions, P2P network lending faces frequent borrower credit risk crises during the transaction process, with a high proportion of borrowers default. This paper first analyzes the basic development of China’s P2P online lending and the credit risks of borrowers in the industry. Then according to the characteristics of P2P network lending and previous studies, a credit risk assessment indicators system for borrowers in P2P lending is formulated with 29 indicators. Finally, on the basis of the credit risk assessment indicators system constructed in this paper, BP neural network is built based on the BP algorithm, which is trained by the LM algorithm (Levenberg-Marquardt), Scaled Conjugate Gradient, and Bayesian Regularization respectively, to complete the credit risk assessment model. By comparing the results of three mentioned training methodologies, the BP neural network trained by the LM algorithm is finally adopted to construct the credit risk assessment model of borrowers in P2P lending, in which the input layer node is 9, the hidden layer node is 11 and output layer node is 1. The model can provide practical guidance for China and other countries’ P2P lending platforms, and therefore to establish and improve an accurate and effective borrower credit risk management system.

In this paper, we describe a novel approach to the development of a reference standard for the quality control of complex natural products, which will assist in the assessment of their authenticity and purity. The proposed method provides a template for the selection of samples, which can be pooled to obtain a reference standard. A shortfall of such an approach is, however, that the pooled sample is static in nature and therefore unable to capture difference in processing conditions or natural variations triggered by geographical or climatic impacts over time. To address this, the paper also outlines the development of a dynamic reference standard, which allows for ongoing adjustments to future variations. The method employs High-Performance Thin Layer Chromatography (HPTLC) derived extract profiles processed by multivariate analysis. The development of the dynamic reference standard is illustrated using honey, a complex natural matrix, as an example.

Objective Some researchers have studied about early prediction and diagnosis of major adverse cardiovascular events (MACE), but their accuracies were not high. Therefore, this paper proposes a soft voting ensemble classifier (SVE) using machine learning (ML) algorithms. Methods We used the Korea Acute Myocardial Infarction Registry dataset and selected 11,189 subjects among 13,104 with the 2-year follow-up. It was subdivided into two groups (ST-segment elevation myocardial infarction (STEMI), non ST-segment elevation myocardial infarction NSTEMI), and then subdivided into training (70%) and test dataset (30%). Third, we selected the ranges of hyper-parameters to find the best prediction model from random forest (RF), extra tree (ET), gradient boosting machine (GBM), and SVE. We generated each ML-based model with the best hyper-parameters, evaluated by 5-fold stratified cross-validation, and then verified by test dataset. Lastly, we compared the performance in the area under the ROC curve (AUC), accuracy, precision, recall, and F-score. Results The accuracies for RF, ET, GBM, and SVE were (88.85%, 88.94%, 87.84%, 90.93%) for complete dataset, (84.81%, 85.00%, 83.70%, 89.07%) STEMI, (88.81%, 88.05%, 91.23%, 91.38%) NSTEMI. The AUC values in RF were (98.96%, 98.15%, 98.81%), ET (99.54%, 99.02%, 99.00%), GBM (98.92%, 99.33%, 99.41%), and SVE (99.61%, 99.49%, 99.42%) for complete dataset, STEMI, and NSTEMI, respectively. Consequently, the accuracy and AUC in SVE outperformed other ML models. Conclusions The performance of our SVE was significantly higher than other machine learning models (RF, ET, GBM) and its major prognostic factors were different. This paper will lead to the development of early risk prediction and diagnosis tool of MACE in ACS patients.