Search

We describe herein a method of recharging used commercial spin columns or assembling homemade spin columns using filter paper as binding material for cost-effective, low throughput nucleic acid purification. The efficiency of filter paper-based spin columns was evaluated for purification of nucleic acids from various sources. Following protocols of commercial kits, we found filter paper to be a useful binding material for purification of nucleic acids, including plant genomic DNA, plant total RNA, PCR products, and DNA from agarose gels. However, filter paper has a weak binding affinity to plasmid DNA in tested miniprep protocols. Protocols for the use of filter paper recharged spin columns or homemade spin columns for low throughput purification of plant genomic DNA and total RNA with unused commercial kit buffers or less expensive homemade buffers are presented. [ABSTRACT FROM AUTHOR]

Here we describe an ultra-low-cost origami-based approach for large-scale manufacturing of microscopes, specifically demonstrating brightfield, darkfield, and fluorescence microscopes. Merging principles of optical design with origami enables high-volume fabrication of microscopes from 2D media. Flexure mechanisms created via folding enable a flat compact design. Structural loops in folded paper provide kinematic constraints as a means for passive self-alignment. This light, rugged instrument can survive harsh field conditions while providing a diversity of imaging capabilities, thus serving wide-ranging applications for cost-effective, portable microscopes in science and education. [ABSTRACT FROM AUTHOR]

Early industrialization and the development of cheap production processes for paper have led to an exponential accumulation of paper-based documents during the last two centuries. Archives and libraries harbor vast amounts of ancient and modern documents and have to undertake extensive endeavors to protect them from abiotic and biotic deterioration. While services for mechanical preservation such as ex post de-acidification of historic documents are already commercially available, the possibilities for long-term protection of paper-based documents against fungal attack (apart from temperature and humidity control) are very limited. Novel processes for mechanical enhancement of damaged cellulosic documents use Ionic Liquids (IL) as essential process components. With some of these ILs having azole-functionalities similar to well-known fungicides such as Clotrimazole, the possibility of antifungal activities of these ILs was proposed but has not yet been experimentally confirmed. We evaluated the potency of four ILs with potential application in paper restoration for suppression of fungal growth on five relevant paper-infesting molds. The results revealed a general antifungal activity of all ILs, which increased with the size of the non-polar group. Physiological experiments and ultimate elemental analysis allowed to determine the minimal inhibitory concentration of each IL as well as the residual IL concentration in process-treated paper. These results provide valuable guidelines for IL-applications in paper restoration processes with antifungal activity as an added benefit. With azoles remaining in the paper after the process, simultaneous repair and biotic protection in treated documents could be facilitated. [ABSTRACT FROM AUTHOR]

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery. [ABSTRACT FROM AUTHOR]

Microbial fuel cells (MFCs) can evolve in a viable technology if environmentally sound materials are developed and became available at low cost for these devices. This is especially important not only for the designing of large wastewater treatment systems, but also for the fabrication of low-cost, single-use devices. In this work we synthesized membranes by a simple procedure involving easily-biodegradable and economic materials such as poly (vinyl alcohol) (PVA), chitosan (CS) and the composite PVA:CS. Membranes were chemical and physically characterized and compared to Nafion®. Performance was studied using the membrane as separator in a typical H-Type MFCs showing that PVA:CS membrane outperform Nafion® 4 times (power production) while being 75 times more economic. We found that performance in MFC depends over interactions among several membrane characteristics such as oxygen permeability and ion conductivity. Moreover, we design a paper-based micro-scale MFC, which was used as a toxicity assay using 16 μL samples containing formaldehyde as a model toxicant. The PVA:CS membrane presented here can offer low environmental impact and become a very interesting option for point of need single-use analytical devices, especially in low-income countries where burning is used as disposal method, and toxic fluoride fumes (from Nafion®) can be released to the environment. [ABSTRACT FROM AUTHOR]

Quantifying the impact of a scholarly paper is of great significance, yet the effect of geographical distance of cited papers has not been explored. In this paper, we examine 30,596 papers published in Physical Review C, and identify the relationship between citations and geographical distances between author affiliations. Subsequently, a relative citation weight is applied to assess the impact of a scholarly paper. A higher-order weighted quantum PageRank algorithm is also developed to address the behavior of multiple step citation flow. Capturing the citation dynamics with higher-order dependencies reveals the actual impact of papers, including necessary self-citations that are sometimes excluded in prior studies. Quantum PageRank is utilized in this paper to help differentiating nodes whose PageRank values are identical. [ABSTRACT FROM AUTHOR]

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming. [ABSTRACT FROM AUTHOR]

Cooperation among kin is common in animal societies. Kin groups may form by individuals directly discriminating relatives based on kin recognition cues, or form passively through natal philopatry and limited dispersal. We describe the genetic landscape for a primitively eusocial wasp, Polistes dominula, and ask whether individuals choose cooperative partners that are nearby and/or that are genetic relatives. Firstly, we genotyped an entire sub-population of 1361 wasps and found genetic structuring on an extremely fine scale: the probability of finding genetic relatives decreases exponentially within just a few meters of an individual’s nest. At the same time, however, we found a lack of genetic structuring between natural nest aggregations within the population. Secondly, in a separate dataset where ~2000 wasps were genotyped, we show that wasps forced experimentally to make a new nest choice tended to choose new nests near to their original nests, and that these nests tended to contain some full sisters. However, a significant fraction of wasps chose nests that did not contain sisters, despite sisters being present in nearby nests. Although we cannot rule out a role for direct kin recognition or natal nest-mate recognition, our data suggest that kin groups may form via a philopatric rule-of-thumb, whereby wasps simply select groups and nesting sites that are nearby. The result is that most subordinate helpers obtain indirect fitness benefits by breeding cooperatively. [ABSTRACT FROM AUTHOR]

Biosensors have emerged as a valuable tool with high specificity and sensitivity for fast and reliable detection of hazardous substances in drinking water. Numerous substances have been addressed using synthetic biology approaches. However, many proposed biosensors are based on living, genetically modified organisms and are therefore limited in shelf life, usability and biosafety. We addressed these issues by the construction of an extensible, cell-free biosensor. Storage is possible through freeze drying on paper. Following the addition of an aqueous sample, a highly efficient cell-free protein synthesis (CFPS) reaction is initiated. Specific allosteric transcription factors modulate the expression of ‘superfolder’ green fluorescent protein (sfGFP) depending on the presence of the substance of interest. The resulting fluorescence intensities are analyzed with a conventional smartphone accompanied by simple and cheap light filters. An ordinary differential equitation (ODE) model of the biosensors was developed, which enabled prediction and optimization of performance. With an optimized cell-free biosensor based on the Shigella flexneri MerR transcriptional activator, detection of 6 μg/L Hg(II) ions in water was achieved. Furthermore, a completely new biosensor for the detection of gamma-hydroxybutyrate (GHB), a substance used as date-rape drug, was established by employing the naturally occurring transcriptional repressor BlcR from Agrobacterium tumefaciens. [ABSTRACT FROM AUTHOR]

Background: Identification of the source of mosquito blood meals is an important component for disease control and surveillance. Recently, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiling has emerged as an effective tool for mosquito blood meal identification, using the abdomens of freshly engorged mosquitoes. In the field, mosquito abdomens are crushed on Whatman filter papers to determine the host feeding patterns by identifying the origin of their blood meals. The aim of this study was to test whether crushing engorged mosquito abdomens on Whatman filter papers was compatible with MALDI-TOF MS for mosquito blood meal identification. Both laboratory reared and field collected mosquitoes were tested. Material and methods: Sixty Anopheles gambiae Giles were experimentally engorged on the blood of six distinct vertebrate hosts (human, sheep, rabbit, dog, chicken and rat). The engorged mosquito abdomens were crushed on Whatman filter papers for MALDI-TOF MS analysis. 150 Whatman filter papers, with mosquitoes engorged on cow and goat blood, were preserved. A total of 77 engorged mosquito abdomens collected in the Comoros Islands and crushed on Whatman filter papers were tested with MALDI-TOF MS. Results: The MS profiles generated from mosquito engorged abdomens crushed on Whatman filter papers exhibited high reproducibility according to the original host blood. The blood meal host was correctly identified from mosquito abdomens crushed on Whatman filter papers by MALDI-TOF MS. The MS spectra obtained after storage were stable regardless of the room temperature and whether or not they were frozen. The MS profiles were reproducible for up to three months. For the Comoros samples, 70/77 quality MS spectra were obtained and matched with human blood spectra. This was confirmed by molecular tools. Conclusion: The results demonstrated that MALDI-TOF MS could identify mosquito blood meals from Whatman filter papers collected in the field during entomological surveys. The application of MALDI-TOF MS has proved to be rapid and successful, making it a new and efficient tool for mosquito-borne disease surveillance. [ABSTRACT FROM AUTHOR]

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing. [ABSTRACT FROM AUTHOR]

The need to complete multiple tasks concurrently is a common occurrence both daily life and in occupational activities, which can often include simultaneous cognitive and physical demands. As one example, there is increasing availability of head-worn display technologies that can be employed when a user is mobile (e.g., while walking). This new method of information presentation may, however, introduce risks of adverse outcomes such as a decrement to gait performance. The goal of this study was thus to quantify the effects of a head-worn display (i.e., smart glasses) on motor variability during gait and to compare these effects with those of other common information displays (i.e., smartphone and paper-based system). Twenty participants completed four walking conditions, as a single task and in three dual-task conditions (three information displays). In the dual-task conditions, the information display was used to present several cognitive tasks. Three different measures were used to quantify variability in gait parameters for each walking condition (using the cycle-to-cycle standard deviation, sample entropy, and the “goal-equivalent manifold” approach). Our results indicated that participants used less adaptable gait strategies in dual-task walking using the paper-based system and smartphone conditions compared with single-task walking. Gait performance, however, was less affected during dual-task walking with the smart glasses. We conclude that the risk of an adverse gait event (e.g., a fall) in head-down walking conditions (i.e., the paper-based system and smartphone conditions) were higher than in single-task walking, and that head-worn displays might help reduce the risk of such events during dual-task gait conditions. [ABSTRACT FROM AUTHOR]

Written communication plays a crucial role in the history of modern civilizations as manuscripts do not only exist contemporarily, but are passed on to subsequent generations. Besides a document’s content, information is stored in the materials used for its production. Analyses of the composition allow, for example, identifying the biological origins of materials, dating, and help to understand degradation patterns. A combination of microscopic and DNA approaches was applied in order to analyze various plant derived writing sheets. Given their diversity and abundance in museum collections, plant based writing supports are yet an underexplored target for DNA studies. DNA retrieval of paper is low compared to raw paper plant material, which is likely due to the loss of organic components during paper production. Optimizing DNA extraction for each respective material drastically increased DNA recovery. Finally, we present a non-invasive DNA sampling method that utilizes nylon membranes, commonly used for bacterial DNA sampling and that is applicable to delicate material. Although bacterial infestation was visible on one sample, as indicated by scanning electron microscopy, endogenous DNA was retrieved. The results presented here are promising as they extend the scope of sources for DNA analyses by demonstrating that DNA molecules can be retrieved from a variety of plant derived writing supports. In future, such analyses can help to explore the biological diversity not only of plants and of additives utilized for producing writing supports, but also of the plenty products made from paper. [ABSTRACT FROM AUTHOR]

The safety of highly aggregated tourist crowds is a challenging and important issue. This paper not only provided a comprehensive analysis of the accidents of highly aggregated tourist crowds but also determined the occurrence mechanism and coping paths. Based on the analysis of multiple cases, we found that the variable status of highly aggregated tourist crowds was the result of the interaction of three main elements: multisource pressure, state mutations and management responses. A series of factors interact and result in accidents, and the lack of a management response or a low-quality management response is the root cause of such accidents. A high-quality management response is a basic safety precaution for highly aggregated tourist crowds. Therefore, forming a virtuous circle of multisource pressure, state mutations and management responses is an effective path for coping with accidents. [ABSTRACT FROM AUTHOR]

Moderate-to-severe psoriasis is associated with significant comorbidity, an impaired quality of life, and increased medical costs, including those associated with treatments. Systematic reviews (SRs) and meta-analyses (MAs) of randomized clinical trials are considered two of the best approaches to the summarization of high-quality evidence. However, methodological bias can reduce the validity of conclusions from these types of studies and subsequently impair the quality of decision making. As co-authorship is among the most well-documented forms of research collaboration, the present study aimed to explore whether authors’ collaboration methods might influence the methodological quality of SRs and MAs of psoriasis. Methodological quality was assessed by two raters who extracted information from full articles. After calculating total and per-item Assessment of Multiple Systematic Reviews (AMSTAR) scores, reviews were classified as low (0-4), medium (5-8), or high (9-11) quality. Article metadata and journal-related bibliometric indices were also obtained. A total of 741 authors from 520 different institutions and 32 countries published 220 reviews that were classified as high (17.2%), moderate (55%), or low (27.7%) methodological quality. The high methodological quality subnetwork was larger but had a lower connection density than the low and moderate methodological quality subnetworks; specifically, the former contained relatively fewer nodes (authors and reviews), reviews by authors, and collaborators per author. Furthermore, the high methodological quality subnetwork was highly compartmentalized, with several modules representing few poorly interconnected communities. In conclusion, structural differences in author-paper affiliation network may influence the methodological quality of SRs and MAs on psoriasis. As the author-paper affiliation network structure affects study quality in this research field, authors who maintain an appropriate balance between scientific quality and productivity are more likely to develop higher quality reviews. [ABSTRACT FROM AUTHOR]

University scientific research ability is an important indicator to express the strength of universities. In this paper, the evaluation of university scientific research ability is investigated based on the output of sci-tech papers. Four university alliances from North America, UK, Australia, and China, are selected as the case study of the university scientific research evaluation. Data coming from Thomson Reuters InCites are collected to support the evaluation. The work has contributed new framework to the issue of university scientific research ability evaluation. At first, we have established a hierarchical structure to show the factors that impact the evaluation of university scientific research ability. Then, a new MCDM method called D-AHP model is used to implement the evaluation and ranking of different university alliances, in which a data-driven approach is proposed to automatically generate the D numbers preference relations. Next, a sensitivity analysis has been given to show the impact of weights of factors and sub-factors on the evaluation result. At last, the results obtained by using different methods are compared and discussed to verify the effectiveness and reasonability of this study, and some suggestions are given to promote China’s scientific research ability. [ABSTRACT FROM AUTHOR]

When young children do not receive adequate amounts of the micronutrient iodine in their diet, their growth and cognitive development can be impaired. Nearly every country in the world has programs in place to track iodine intake and provide supplemental iodine if needed, usually in the form of fortified salt. The iodine nutrition status of a population can be tracked by monitoring iodine levels in urine samples to see if the median value falls in the range of 100–300 micrograms of iodine per liter of urine (μg I/L), which indicates adequate or more than adequate iodine nutrition. Many low and middle-income countries (LMIC) do not have a laboratory capable of carrying out this challenging assay, so samples must be sent out for assay in external labs, which is expensive and time-consuming. In most LMIC, population iodine surveys are carried out every 5–10 years, which limits the utility of the data for program monitoring and evaluation. To solve this problem, we developed a field-friendly paper test card that uses the Sandell-Kolthoff reaction to measure urinary iodine levels. A blind internal validation study showed that 93% of samples (n = 60) of iodide in an artificial urine matrix were categorized correctly by visual analysis as deficient, adequate, or excessive for levels set forth by the World Health Organization. Quantitative measurements based on computer image analysis had an error of 40 ± 20 μg I/L (n = 35 for samples in the calibration range) and these results categorized 88% of the samples (n = 60) correctly. We employed lifecycle analysis principles to address the known toxicity of arsenic, which is an obligatory reagent in the Sandell-Kolthoff reaction. Disposal of the cards in a landfill (their most likely destination after use) could let arsenic leach into groundwater; toxicity characteristic leaching procedure (TCLP) tests showed that the level of arsenic leached from the cards was 28.78 ppm, which is above the United States Environmental Protection Agency’s limit of 5 parts per million for solid waste. We integrated a remediation module into the card. This module contains oxone, to oxidize As(III) to As(V) oxyacids, and the iron oxide goethite. TCLP testing showed that the leachable amount of arsenic was reduced by at least 97.6%—from 28.8 ppm to lower than 0.7 ± 0.7 ppm (n = 20). This upstream intervention rendered the test card suitable for landfilling while retaining its functionality to perform a critical public health evaluation. [ABSTRACT FROM AUTHOR]

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a “dying” paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing “offspring”. Practically, this might be used to trace the successive published milestones of a research field. [ABSTRACT FROM AUTHOR]

It is important to implement detection and assessment of plant diseases based on remotely sensed data for disease monitoring and control. Hyperspectral data of healthy leaves, leaves in incubation period and leaves in diseased period of wheat stripe rust and wheat leaf rust were collected under in-field conditions using a black-paper-based measuring method developed in this study. After data preprocessing, the models to identify the diseases were built using distinguished partial least squares (DPLS) and support vector machine (SVM), and the disease severity inversion models of stripe rust and the disease severity inversion models of leaf rust were built using quantitative partial least squares (QPLS) and support vector regression (SVR). All the models were validated by using leave-one-out cross validation and external validation. The diseases could be discriminated using both distinguished partial least squares and support vector machine with the accuracies of more than 99%. For each wheat rust, disease severity levels were accurately retrieved using both the optimal QPLS models and the optimal SVR models with the coefficients of determination (R2) of more than 0.90 and the root mean square errors (RMSE) of less than 0.15. The results demonstrated that identification and severity evaluation of stripe rust and leaf rust at the leaf level could be implemented based on the hyperspectral data acquired using the developed method. A scientific basis was provided for implementing disease monitoring by using aerial and space remote sensing technologies. [ABSTRACT FROM AUTHOR]

Objective: Detection of vascular endothelial growth factor (VEGF) levels in ocular tissue may perhaps provide insight into the role of VEGF in the pathogenesis and progression of diabetic retinopathy (DR). The aim of this study was to evaluate the levels of VEGF in tears and serum amongst type 2 diabetes mellitus (DM) patients. Methods: A comparative cross-sectional study was conducted between August 2016 and May 2018 involving type 2 DM patients with no DR, non-proliferative DR (NPDR), and proliferative DR (PDR). Tear samples were collected using no.41 Whatman filter paper (Schirmer strips) and 5 mL blood samples were drawn by venous puncture. VEGF levels in tears and serum were measured by enzyme-linked immunosorbent assay. Results: A total of 88 type 2 DM patients (no DR: 30 patients, NPDR: 28 patients, PDR: 30 patients) were included in the study. Mean tear VEGF levels were significantly higher in the NPDR and PDR groups (114.4 SD 52.5 pg/mL and 150.8 SD 49.7 pg/mL, respectively) compared to the no DR group (40.4 SD 26.5 pg/mL, p < 0.001). There was no significant difference in the mean serum VEGF levels between the three groups. There was a fair correlation between serum and tear VEGF levels (p = 0.015, r = 0.263). Conclusion: VEGF levels in tears were significantly higher amongst diabetic patients with DR compared to those without DR and were significantly associated with the severity of DR. There was a fair correlation between serum and tear VEGF levels. Detection of VEGF in tears is a good non-invasive predictor test for the severity of DR. A large cohort study is needed for further evaluation. [ABSTRACT FROM AUTHOR]

The safety of chemicals, drugs, novel foods and genetically modified crops is often tested using repeat-dose sub-acute toxicity tests in rats or mice. It is important to avoid misinterpretations of the results as these tests are used to help determine safe exposure levels in humans. Treated and control groups are compared for a range of haematological, biochemical and other biomarkers which may indicate tissue damage or other adverse effects. However, the statistical analysis and presentation of such data poses problems due to the large number of statistical tests which are involved. Often, it is not clear whether a “statistically significant” effect is real or a false positive (type I error) due to sampling variation. The author's conclusions appear to be reached somewhat subjectively by the pattern of statistical significances, discounting those which they judge to be type I errors and ignoring any biomarker where the p-value is greater than p = 0.05. However, by using standardised effect sizes (SESs) a range of graphical methods and an over-all assessment of the mean absolute response can be made. The approach is an extension, not a replacement of existing methods. It is intended to assist toxicologists and regulators in the interpretation of the results. Here, the SES analysis has been applied to data from nine published sub-acute toxicity tests in order to compare the findings with those of the author's. Line plots, box plots and bar plots show the pattern of response. Dose-response relationships are easily seen. A “bootstrap” test compares the mean absolute differences across dose groups. In four out of seven papers where the no observed adverse effect level (NOAEL) was estimated by the authors, it was set too high according to the bootstrap test, suggesting that possible toxicity is under-estimated. [ABSTRACT FROM AUTHOR]

Background: Sponsors that seek to commercialize new drugs apply to the Food and Drug Administration (FDA) which independently analyzes the raw data and reports the results on its website. Objectives: This study sought to determine if there are differences between the FDA assessments and journal reports on biologic agents developed for the treatment of rheumatoid arthritis. Methods: Available data on FDA-approved drugs were extracted from the website, and a systematic literature search was conducted to identify matching studies in peer-reviewed medical journals. Outcome measures were the American College of Rheumatology response criteria ACR20 (efficacy) and withdrawal due to adverse events (safety). As effect size odds ratios were estimated for each active trial arm vs. control arm (i.e. for both sources: FDA and journal report), followed by calculation of the ratios of the FDA and journal report odds ratios. A ratio of odds ratios not equal to 1 was categorized as a discrepancy. Results: FDA reports were available for 8 of 9 FDA-approved biologic agents for rheumatoid arthritis; all identified trials (34) except one were published in peer-reviewed journals. Overall, discrepancies were noted for 20 of the 33 evaluated trials. Differences in the apparent benefit reporting were found in 39% (24/61) pairwise comparisons and in 11 cases these were statistically significant; the FDA report showed greater benefit than the journal publication in 15 comparisons and lesser benefit in 9. Differences in the reported harms were found in 51% (28/55) pairwise comparisons and were statistically significant in 5. The “signal” in FDA reports showed a less harmful effect than the journal publication in 17 comparisons whereas a more harmful effect in 11. The differences were attributed to differences in analytic approach, patient inclusion, rounding effect, and counting discrepancies. However, no differences were categorized as critical. Conclusion: There was no empirical evidence to suggest biased estimates between the two sources. Increased and detailed transparency in publications would improve the understanding and credibility of published results. Further, the FDA report was found to be a useful source when data are missing in the published report (i.e. reporting bias). [ABSTRACT FROM AUTHOR]

This bibliometric study of a large publication set dealing with research on climate change aims at mapping the relevant literature from a bibliometric perspective and presents a multitude of quantitative data: (1) The growth of the overall publication output as well as (2) of some major subfields, (3) the contributing journals and countries as well as their citation impact, and (4) a title word analysis aiming to illustrate the time evolution and relative importance of specific research topics. The study is based on 222,060 papers (articles and reviews only) published between 1980 and 2014. The total number of papers shows a strong increase with a doubling every 5–6 years. Continental biomass related research is the major subfield, closely followed by climate modeling. Research dealing with adaptation, mitigation, risks, and vulnerability of global warming is comparatively small, but their share of papers increased exponentially since 2005. Research on vulnerability and on adaptation published the largest proportion of very important papers (in terms of citation impact). Climate change research has become an issue also for disciplines beyond the natural sciences. The categories Engineering and Social Sciences show the strongest field-specific relative increase. The Journal of Geophysical Research, the Journal of Climate, the Geophysical Research Letters, and Climatic Change appear at the top positions in terms of the total number of papers published. Research on climate change is quantitatively dominated by the USA, followed by the UK, Germany, and Canada. The citation-based indicators exhibit consistently that the UK has produced the largest proportion of high impact papers compared to the other countries (having published more than 10,000 papers). Also, Switzerland, Denmark and also The Netherlands (with a publication output between around 3,000 and 6,000 papers) perform top—the impact of their contributions is on a high level. The title word analysis shows that the term climate change comes forward with time. Furthermore, the term impact arises and points to research dealing with the various effects of climate change. The discussion of the question of human induced climate change towards a clear fact (for the majority of the scientific community) stimulated research on future pathways for adaptation and mitigation. Finally, the term model and related terms prominently appear independent of time, indicating the high relevance of climate modeling. [ABSTRACT FROM AUTHOR]

Basic color terms used in Mandarin Chinese have been controversial since first discussed by Berlin and Kay in 1969. Previous studies showed much inconsistency on what should be considered as basic color terms in Mandarin Chinese. In the present study, we investigated categories of color rather than merely the color terms used by Taiwanese native Mandarin speakers. Using samples conforming to the Berlin and Kay survey, various colors were chosen from a collection of Natural Color System (NCS) colored papers and mounted on a piece of neutral gray card. The card was then mounted on a touch-screen, under D65 illumination. Thirty-two single-character color related Mandarin terms were selected from a Chinese character database according to frequency of use. Participants were required to select the color sample that matched the term by pressing a virtual button on the touch screen. The results show that certain terms can be directly correlated to basic color terms in English, comparable with the results of Berlin and Kay’s original study and those that followed. However, some terms, such as Mo (墨 ink), Tie (鐵 iron), and Cai (菜vegetable), show a wide spread of term maps and inconsistent use among subjects. Principle component analysis (PCA) procedures were used to analysis the commodity of data among subjects. The findings suggest that the basic color categories among Mandarin Chinese speakers are similar to those found in the World Color Survey (WCS), but are represented by wide-spread and inconsistent color terms among speakers. [ABSTRACT FROM AUTHOR]

The challenge of detecting research topics in a specific research field has attracted attention from researchers in the bibliometrics community. In this study, to solve two problems of clustering papers, i.e., the influence of different distributions of citation links and involved textual features on similarity computation, the authors propose a hybrid self-optimized clustering model to detect research topics by extending the hybrid clustering model to identify “core documents”. First, the Amsler network, consisting of bibliographic coupling and co-citation links, is created to calculate the citation-based similarity based on the cosine angle of papers. Second, the cosine similarity is also used to compute the text-based similarity, which consists of the textual statistical and topological features. Then, the cosine angle of the linear combination of citation- and text-based similarity is considered as the hybrid similarity. Finally, the Louvain method is applied to cluster papers, and the terms based on term frequency are used to label clusters. To test the performance of the proposed model, a dataset related to the data envelopment analysis field is used for comparison and analysis of clustering results. Based on the benchmark built, different clustering methods with different citation links or textual features are compared according to evaluation measures. The results show that the proposed model can obtain reasonable and effective clustering results, and the research topics of data envelopment analysis field are also analyzed based on the proposed model. As different features are considered in the proposed model compared with previous hybrid clustering models, the proposed clustering model can provide inspiration for further studies on topic identification by other researchers. [ABSTRACT FROM AUTHOR]

White birch (Betula papyrifera) is a dominant tree species of the Boreal Forest. Recent studies have shown that it is fairly resistant to heavy metal contamination, specifically to nickel. Knowledge of regulation of genes associated with metal resistance in higher plants is very sketchy. Availability and annotation of the dwarf birch (B. nana) enables the use of high throughout sequencing approaches to understanding responses to environmental challenges in other Betula species such as B. papyrifera. The main objectives of this study are to 1) develop and characterize the B. papyrifera transcriptome, 2) assess gene expression dynamics of B. papyrifera in response to nickel stress, and 3) describe gene function based on ontology. Nickel resistant and susceptible genotypes were selected and used for transcriptome analysis. A total of 208,058 trinity genes were identified and were assembled to 275,545 total trinity transcripts. The transcripts were mapped to protein sequences and based on best match; we annotated the B. papyrifera genes and assigned gene ontology. In total, 215,700 transcripts were annotated and were compared to the published B. nana genome. Overall, a genomic match for 61% transcripts with the reference genome was found. Expression profiles were generated and 62,587 genes were found to be significantly differentially expressed among the nickel resistant, susceptible, and untreated libraries. The main nickel resistance mechanism in B. papyrifera is a downregulation of genes associated with translation (in ribosome), binding, and transporter activities. Five candidate genes associated to nickel resistance were identified. They include Glutathione S–transferase, thioredoxin family protein, putative transmembrane protein and two Nramp transporters. These genes could be useful for genetic engineering of birch trees. [ABSTRACT FROM AUTHOR]

In recent decades, we have observed an intensification of science, technology and innovation activities in Brazil. The increase in production of scientific papers indexed in international databases, however, has not been accompanied by an equivalent increase in the impact of publications. This paper presents a methodology for analyzing production and the impact of certain research areas in Brazil related to two aspects: the origin of the journals (national or foreign) and international collaboration. These two variables were selected for being of particular importance in understanding the context of scientific production and communication in countries with emerging economies. The sample consisted of papers written by Brazilian researchers in 19 subfields of knowledge published from 2002 to 2011, totaling 85,082 papers. To calculate the impact, we adopted a normalized indicator called the relative subfield citedness (Rw) using a window of 5 years to obtain measurements evaluated in 2 different years: 2007 and 2012. The data on papers and citations were collected from the Web of Science database. From the results, we note that most of the subfields have presented, from one quinquennium to another, improved performance in the world production rankings. Regarding publication in national and foreign journals, we observed a trend in the distribution maintenance of production of the subfields based on the origin of the journal. Specifically, for impact, we identified a lower Rw pattern for Brazilian papers when they were published in national journals in all subfields. When Brazilian products are published in foreign journals, we observed a higher impact for those papers, even surpassing the average global impact in some subfields. For international collaboration, we analyzed the percentage of participation of foreign researchers and the connection between collaboration and the impact of papers, especially emphasizing the distinction of hyperauthorship papers in terms of production and impact. [ABSTRACT FROM AUTHOR]

Samples of bleached kraft pine cellulosic pulp, either treated with an enzyme preparation (a Thermomyces lanuginosus xylanase, an Aspergillus sp. cellulase, and a multienzyme preparation NS-22086 containing both these activities) or untreated, were refined in a laboratory PFI mill. The treatment with cellulases contained in the last two preparations significantly improved the pulp’s susceptibility to refining (the target freeness value of 30°SR was achieved in a significantly shorter time), increased water retention value (WRV) and fines contents while the weighted average fiber length was significantly reduced. These changes of pulp parameters caused deterioration of paper strength properties. The treatment with the xylanase, which partially hydrolyzed xylan, small amounts of which are associated with cellulose fibers, only slightly loosened the structure of fibers. These subtle changes positively affected the susceptibility of the pulp to refining (refining energy was significantly reduced) and improved the static strength properties of paper. Thus, the treatment of kraft pulps with xylanases may lead to substantial savings of refining energy without negative effects on paper characteristics. [ABSTRACT FROM AUTHOR]