Search

Jinyunpelta sinensis is a basal ankylosaurine dinosaur excavated from the mid Cretaceous Liangtoutang Formation of Jinyun County, Zhejiang Province, China. In the present study, its dental microwear was observed using a confocal laser microscope. Jinyunpelta had steep wear facets that covered most of buccal surfaces of posterior dentary teeth. Observation of dental microwear on the wear facet revealed that scratch orientation varied according to its location within the wear facet: vertically (i.e. apicobasally) oriented scratches were dominant in the upper half of the wear facet, and horizontally (i.e. mesiolaterally) oriented ones were in the bottom of the facet. These findings indicated that Jinyunpelta adopted precise tooth occlusion and biphasal jaw movement (orthal closure and palinal lower jaw movement). The biphasal jaw movement was widely observed among nodosaurids, among ankylosaurids, it was previously only known from the Late Cretaceous North American taxa, and not known among Asian ankylosaurids. The finding of biphasal jaw movement in Jinyunpelta showed sophisticate feeding adaptations emerged among ankylosaurids much earlier (during Albian or Cenomanian) than previously thought (during Campanian). The Evolution of the biphasal jaw mechanism that contemporaneously occurred among two lineages of ankylosaurs, ankylosaurids and nodosaurids, showed high evolutionary plasticity of ankylosaur jaw mechanics., Competing Interests: The authors have declared that no competing interests exist.

During the two World Wars, Bartonella quintana was responsible for trench fever and is now recognised as an agent of re-emerging infection. Many reports have indicated widespread B. quintana exposure since the 1990s. In order to evaluate its prevalence in ancient populations, we used real-time PCR to detect B. quintana DNA in 400 teeth collected from 145 individuals dating from the 1st to 19th centuries in nine archaeological sites, with the presence of negative controls. Fisher's exact test was used to compare the prevalence of B. quintana in civil and military populations. B. quintana DNA was confirmed in a total of 28/145 (19.3%) individuals, comprising 78 citizens and 67 soldiers, 20.1% and 17.9% of which were positive for B. quintana bacteraemia, respectively. This study analysed previous studies on these ancient samples and showed that the presence of B. quintana infection followed the course of time in human history; a total of 14/15 sites from five European countries had a positive prevalence. The positive rate in soldiers was higher than those of civilians, with 20% and 18.8%, respectively, in the 18th and 19th centuries, but the difference in frequency was not significant. These results confirmed the role of dental pulp in diagnosing B. quintana bacteraemia in ancient populations and showed the incidence of B. quintana in both civilians and soldiers., Competing Interests: The authors have declared that no competing interests exist.

The characterization and quantification of human dental enamel microstructure, in both permanent and deciduous teeth, allows us to document crucial growth parameters and to identify stressful events, thus contributing to the reconstruction of the past life history of an individual. Most studies to date have focused on the more accessible post-natal portion of the deciduous dental enamel, even though the analysis of prenatal enamel is pivotal in understanding fetal growth, and reveals information about the mother's health status during pregnancy. This contribution reports new data describing the prenatal enamel development of 18 central deciduous incisors from the Imperial Roman necropolis of Velia (I-II century CE, Salerno, Italy). Histomorphometrical analysis was performed to collect data on prenatal crown formation times, daily secretion rates and enamel extension rates. Results for the Velia sample allowed us to derive a new regression formula, using a robust statistical approach, that describes the average rates of deciduous enamel formation. This can now be used as a reference for pre-industrial populations. The same regression formula, even when daily incremental markings are difficult to visualize, may provide a clue to predicting the proportion of infants born full term and pre-term in an archaeological series.

Substantial progress in the application of multiple isotope analyses has greatly improved the ability to identify nonlocal individuals amongst archaeological populations over the past decades. More recently the development of large scale models of spatial isotopic variation (isoscapes) has contributed to improved geographic assignments of human and animal origins. Persistent challenges remain, however, in the accurate identification of individual geographic origins from skeletal isotope data in studies of human (and animal) migration and provenance. In an attempt to develop and test more standardized and quantitative approaches to geographic assignment of individual origins using isotopic data two methods, combining 87Sr/86Sr and δ18O isoscapes, are examined for the Circum-Caribbean region: 1) an Interval approach using a defined range of fixed isotopic variation per location; and 2) a Likelihood assignment approach using univariate and bivariate probability density functions. These two methods are tested with enamel isotope data from a modern sample of known origin from Caracas, Venezuela and further explored with two archaeological samples of unknown origin recovered from Cuba and Trinidad. The results emphasize both the potential and limitation of the different approaches. Validation tests on the known origin sample exclude most areas of the Circum-Caribbean region and correctly highlight Caracas as a possible place of origin with both approaches. The positive validation results clearly demonstrate the overall efficacy of a dual-isotope approach to geoprovenance. The accuracy and precision of geographic assignments may be further improved by better understanding of the relationships between environmental and biological isotope variation; continued development and refinement of relevant isoscapes; and the eventual incorporation of a broader array of isotope proxy data.

The Neandertal lineage developed successfully throughout western Eurasia and effectively survived the harsh and severely changing environments of the alternating glacial/interglacial cycles from the middle of the Pleistocene until Marine Isotope Stage 3. Yet, towards the end of this stage, at the time of deteriorating climatic conditions that eventually led to the Last Glacial Maximum, and soon after modern humans entered western Eurasia, the Neandertals disappeared. Western Eurasia was by then exclusively occupied by modern humans. We use occlusal molar microwear texture analysis to examine aspects of diet in western Eurasian Paleolithic hominins in relation to fluctuations in food supplies that resulted from the oscillating climatic conditions of the Pleistocene. There is demonstrable evidence for differences in behavior that distinguish Upper Paleolithic humans from members of the Neandertal lineage. Specifically, whereas the Neandertals altered their diets in response to changing paleoecological conditions, the diets of Upper Paleolithic humans seem to have been less affected by slight changes in vegetation/climatic conditions but were linked to changes in their technological complexes. The results of this study also indicate differences in resource exploitation strategies between these two hominin groups. We argue that these differences in subsistence strategies, if they had already been established at the time of the first contact between these two hominin taxa, may have given modern humans an advantage over the Neandertals, and may have contributed to the persistence of our species despite habitat-related changes in food availabilities associated with climate fluctuations.

The analysis of dental microwear is commonly used by paleontologists and anthropologists to clarify the diets of extinct species, including herbivorous and carnivorous mammals. Currently, there are numerous methods employed to quantify dental microwear, varying in the types of microscopes used, magnifications, and the characterization of wear in both two dimensions and three dimensions. Results from dental microwear studies utilizing different methods are not directly comparable and human quantification of wear features (e.g., pits and scratches) introduces interobserver error, with higher error being produced by less experienced individuals. Dental microwear texture analysis (DMTA), which analyzes microwear features in three dimensions, alleviates some of the problems surrounding two-dimensional microwear methods by reducing observer bias. Here, we assess the accuracy and comparability within and between 2D and 3D dental microwear analyses in herbivorous and carnivorous mammals at the same magnification. Specifically, we compare observer-generated 2D microwear data from photosimulations of the identical scanned areas of DMTA in extant African bovids and carnivorans using a scanning white light confocal microscope at 100x magnification. Using this magnification, dental microwear features quantified in 2D were able to separate grazing and frugivorous bovids using scratch frequency; however, DMTA variables were better able to discriminate between disparate dietary niches in both carnivorous and herbivorous mammals. Further, results demonstrate significant interobserver differences in 2D microwear data, with the microwear index remaining the least variable between experienced observers, consistent with prior research. Overall, our results highlight the importance of reducing observer error and analyzing dental microwear in three dimensions in order to consistently interpret diets accurately.

Background: Primates--including fossil species of apes and hominins--show variation in their degree of molar enamel thickness, a trait long thought to reflect a diet of hard or tough foods. The early hominins demonstrated molar enamel thickness of moderate to extreme degrees, which suggested to most researchers that they ate hard foods obtained on or near the ground, such as nuts, seeds, tubers, and roots. We propose an alternative hypothesis--that the amount of phytoliths in foods correlates with the evolution of thick molar enamel in primates, although this effect is constrained by a species' degree of folivory., Methodology/principal Findings: From a combination of dietary data and evidence for the levels of phytoliths in plant families in the literature, we calculated the percentage of plant foods rich in phytoliths in the diets of twelve extant primates with wide variation in their molar enamel thickness. Additional dietary data from the literature provided the percentage of each primate's diet made up of plants and of leaves. A statistical analysis of these variables showed that the amount of abrasive silica phytoliths in the diets of our sample primates correlated positively with the thickness of their molar enamel, constrained by the amount of leaves in their diet (R(2) = 0.875; p<.0006)., Conclusions/significance: The need to resist abrasion from phytoliths appears to be a key selective force behind the evolution of thick molar enamel in primates. The extreme molar enamel thickness of the teeth of the East African hominin Paranthropus boisei, long thought to suggest a diet comprising predominantly hard objects, instead appears to indicate a diet with plants high in abrasive silica phytoliths.

Background: Dental microwear analyses are commonly used to deduce the diet of extinct mammals. Conventional methods rely on the user identifying features within a 2D image. However, recent interdisciplinary research has lead to the development of an advanced methodology that is free of observer error, based on the automated quantification of 3D surfaces by combining confocal microscopy with scale-sensitive fractal analysis. This method has already proved to be very efficient in detecting dietary differences between species. Focusing on a finer, intra-specific scale of analysis, the aim of this study is to test this method's ability to track such differences between individuals from a single population., Methodology/principal Findings: For the purposes of this study, the 3D molar microwear of 78 individuals from a well-known population of extant roe deer (Capreolus caprelous) is quantified. Multivariate statistical analyses indicate significant seasonal and sexual differences in individual dental microwear design. These are probably the consequence of seasonal variations in fruit, seed and leaf availability, as well as differences in feeding preference between males and females due to distinct energy requirements during periods of rutting, gestation or giving birth. Nevertheless, further investigations using two-block Partial Least-Squares analysis show no strong relationship between individual stomach contents and microwear texture. This is an expected result, assuming that stomach contents are composed of food items ingested during the last few hours whereas dental microwear texture records the physical properties of items eaten over periods of days or weeks., Conclusions/significance: Microwear 3D scale-sensitive fractal analysis does detect differences in diet ranging from the inter-feeding styles scale to the intra-population between-season and between-sex scales. It is therefore a possible tool, to be used with caution, in the further exploration of the feeding biology and ecology of extinct mammals.