Search

In this study, we introduced an efficient subcloning and expression system with two inducible prokaryotic expression promoters, arabinose and lac, in a single plasmid in Escherichia coli. The arabinose promoter unit allows for the expression of a FLAG-tagged protein, while the isopropyl-β-D-thiogalactoside (IPTG)-inducible unit allows for the expression of a Myc-tagged protein. An efficient subcloning (DNA insertion) system (iUnit) follows each promoter. The iUnit, based on a toxin that targets DNA topoisomerase of E. coli, allows for effective selection with arabinose or IPTG induction. With the dual promoter plasmid (pdMAX) system, expressed lacZ (β-galactosidase) activity was significantly decreased compared with the original solo expression system. Despite this disadvantage, we believe that the pdMAX system remains useful. A recombinant plasmid (pdMAX/ara/DsRed/IPTG/EGFP; pdMAX/DsRed/EGFP) with DsRed in the arabinose expression unit and EGFP in the IPTG expression unit showed fluorescent protein expression following additional low-temperature incubation. Thus, the novel pdMAX system allowed efficient subcloning of two different genes and can be used to induce and analyze the expression of two distinct genes. The proposed system can be applied to various types of prokaryotic gene expression analysis.

We introduce a simple and universal cloning plasmid system for gene expression in prokaryotic (Escherichia coli) and mammalian cells. This novel system has two expression modes: the (subcloning) prokaryotic and mammalian modes. This system streamlines the process of producing mammalian gene expression plasmids with desired genes. The plasmid (prokaryotic mode) has an efficient selection system for DNA insertion, multiple component genes with rare restriction sites at both ends (termed "units"), and a simple transformation to mammalian expression mode utilizing rare restriction enzymes and re-ligation (deletion step). The new plasmid contains the lac promoter and operator followed by a blunt-end EcoRV recognition site, and a DNA topoisomerase II toxin-originated gene for effective selection with isopropyl-β-D-thiogalactoside (IPTG) induction. This system is highly efficient for the subcloning of blunt-end fragments, including PCR products. After the insertion of the desired gene, protein encoded by the desired gene can be detected in E. coli with IPTG induction. Then, the lac promoter and operator are readily deleted with 8-nucleotide rare-cutter blunt-end enzymes (deletion step). Following re-ligation and transformation, the plasmid is ready for mammalian expression analysis (mammalian mode). This idea (conversion from prokaryotic to mammalian mode) can be widely adapted. The pgMAX system overwhelmingly simplifies prokaryotic and mammalian gene expression analyses.

Commonly used methods for site-directed DNA mutagenesis require copying the entire target plasmid. These methods allow relatively easy modification of DNA sequences in small plasmids but become less efficient and faithful for large plasmids, necessitating full sequence verification. Introduction of mutations in larger plasmids requires subcloning, a slow and labor-intensive process, especially for multiple mutations. We have developed an efficient DNA mutagenesis technique, UnRestricted Mutagenesis and Cloning (URMAC) that replaces subcloning steps with quick biochemical reactions. URMAC does not suffer from plasmid size constraints and allows simultaneous introduction of multiple mutations. URMAC involves manipulation of only the mutagenesis target site(s), not the entire plasmid being mutagenized, therefore only partial sequence verification is required. Basic URMAC requires two PCR reactions, each followed by a ligation reaction to circularize the product, with an optional third enrichment PCR step followed by a traditional cloning step that requires two restriction sites. Here, we demonstrate URMAC's speed, accuracy, and efficiency through several examples, creating insertions, deletions or substitutions in plasmids ranging from 2.6 kb to 17 kb without subcloning.

The genus Perkinsus includes protozoan parasites of mollusks responsible for losses in the aquaculture industry and hampering the recovery of natural shellfish beds worldwide, and they are a key taxon for understanding intracellular parasitism adaptations. The ability to propagate the parasite in liquid media, in the absence of the host, has been crucial for improving understanding of its biology; however, alternative techniques to grow the parasite are needed to explore other basic aspects of the Perkinsus spp. biology. We optimized a DME: Ham's F12-5% FBS- containing solid agar medium for plating Perkinsus marinus. This solid medium supported trophozoite propagation both by binary fission and schizogony. Colonies were visible to the naked eye 17 days after plating. We tested the suitability of this method for several applications, including the following: 1) Subcloning P. marinus isolates: single discrete P. marinus colonies were obtained from DME: Ham's F12-5% FBS- 0.75% agar plates, which could be further propagated in liquid medium; 2) Subcloning engineered Perkinsus mediterraneus MOE[MOE]: GFP by streaking cultures on plates; 3) Chemical susceptibility: Infusing the DME: Ham's F12-5% FBS- 0.75% agar plates with triclosan resulted in inhibition of the parasite propagation in a dose-dependent manner. Altogether, our plating method has the potential for becoming a key tool for investigating diverse aspects of Perkinsus spp. biology, developing new molecular tools, and for biotechnological applications.

Gene editing protocols often require the use of a subcloning step to isolate successfully edited cells, the behavior of which is then compared to the aggregate parental population and/or other non-edited subclones. Here we demonstrate that the inherent functional heterogeneity present in many cell lines can render these populations inappropriate controls, resulting in erroneous interpretations of experimental findings. We describe a novel CRISPR/Cas9 protocol that incorporates a single-cell cloning step prior to gene editing, allowing for the generation of appropriately matched, functionally equivalent control and edited cell lines. As a proof of concept, we generated matched control and osteopontin-knockout Her2+ and Estrogen receptor-negative murine mammary carcinoma cell lines and demonstrated that the osteopontin-knockout cell lines exhibit the expected biological phenotypes, including unaffected primary tumor growth kinetics and reduced metastatic outgrowth in female FVB mice. Using these matched cell lines, we discovered that osteopontin-knockout mammary tumors were more sensitive than control tumors to chemotherapy in vivo. Our results demonstrate that heterogeneity must be considered during experimental design when utilizing gene editing protocols and provide a solution to account for it.

Cloning multiple DNA fragments for delivery of several genes of interest into the plant genome is one of the main technological challenges in plant synthetic biology. Despite several modular assembly methods developed in recent years, the plant biotechnology community has not widely adopted them yet, probably due to the lack of appropriate vectors and software tools. Here we present Plant X-tender, an extension of the highly efficient, scarfree and sequence-independent multigene assembly strategy AssemblX,based on overlapdepended cloning methods and rare-cutting restriction enzymes. Plant X-tender consists of a set of plant expression vectors and the protocols for most efficient cloning into the novel vector set needed for plant expression and thus introduces advantages of AssemblX into plant synthetic biology. The novel vector set covers different backbones and selection markers to allow full design flexibility. We have included ccdB counterselection, thereby allowing the transfer of multigene constructs into the novel vector set in a straightforward and highly efficient way. Vectors are available as empty backbones and are fully flexible regarding the orientation of expression cassettes and addition of linkers between them, if required. We optimised the assembly and subcloning protocol by testing different scar-less assembly approaches: the noncommercial SLiCE and TAR methods and the commercial Gibson assembly and NEBuilder HiFi DNA assembly kits. Plant X-tender was applicable even in combination with low efficient homemade chemically competent or electrocompetent Escherichia coli. We have further validated the developed procedure for plant protein expression by cloning two cassettes into the newly developed vectors and subsequently transferred them to Nicotiana benthamiana in a transient expression setup. Thereby we show that multigene constructs can be delivered into plant cells in a streamlined and highly efficient way. Our results will support faster introduction of synthetic biology into plant science., Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe, 990

Functional metagenomic analysis of soil metagenomes is a method for uncovering as-yet unidentified mechanisms for antibiotic resistance. Here we report an unconventional mode by which a response regulator derived from a soil metagenome confers resistance to the β-lactam antibiotic carbenicillin in Escherichia coli. A recombinant clone (βlr16) harboring a 5,169 bp DNA insert was selected from a metagenomic library previously constructed from a remote Alaskan soil. The βlr16 clone conferred specific resistance to carbenicillin, with limited increases in resistance to other tested antibiotics, including other β-lactams (penicillins and cephalosporins), rifampin, ciprofloxacin, erythromycin, chloramphenicol, nalidixic acid, fusidic acid, and gentamicin. Resistance was more pronounced at 24°C than at 37°C. Zone-of-inhibition assays suggested that the mechanism of carbenicillin resistance was not due to antibiotic inactivation. The DNA insert did not encode any genes known to confer antibiotic resistance, but did have two putative open reading frames (ORFs) that were annotated as a metallopeptidase and a two-component response regulator. Transposon mutagenesis and subcloning of the two ORFs followed by phenotypic assays showed that the response regulator gene was necessary and sufficient to confer the resistance phenotype. Quantitative reverse transcriptase PCR showed that the response regulator suppressed expression of the ompF porin gene, independently of the small RNA regulator micF, and enhanced expression of the acrD, mdtA, and mdtB efflux pump genes. This work demonstrates that antibiotic resistance can be achieved by the modulation of gene regulation by heterologous DNA. Functional analyses such as these can be important for making discoveries in antibiotic resistance gene biology and ecology.

Campylobacter jejuni remains one of the major gut pathogens of our time. Its zoonotic nature and wide-spread distribution in industrialized countries calls for a quick and reliable diagnostic tool. Antibody-based detection presents a suitable means to identify pathogenic bacteria. However, the knowledge about immunodominant targets is limited. Thus, an approach is presented, which allows for the rapid screening of numerous cDNA derived expression clones to identify novel antigens. The deeper understanding of immunodominant proteins assists in the design of diagnostic tools and furthers the insight into the bacterium's pathogenicity as well as revealing potential candidates for vaccination. We have successfully screened 1536 clones of an expression library to identify 22 proteins that have not been described as immunodominant before. After subcloning the corresponding 22 genes and expression of full-length proteins, we investigated the immunodominant character by microarrays and ELISA. Subsequently, seven proteins were selected for epitope mapping. For cj0669 and cj0920c linear epitopes were identified. For cj0669, specificity assays revealed a specific linear epitope site. Consequently, an eleven amino acid residue sequence TLIKELKRLGI was analyzed via alanine scan, which revealed the glycine residue to be significant for binding of the antibody. The innovative approach presented herein of generating cDNAs of prokaryotes in combination with a microarray platform rendering time-consuming purification steps obsolete has helped to illuminate novel immunodominant proteins of C. jejuni. The findings of a specific linear epitope pave the way for a plethora of future research and the potential use in diagnostic applications such as serological screenings. Moreover, the current approach is easily adaptable to other highly relevant bacteria making it a formidable tool for the future discovery of antigens and potential biomarkers. Consequently, it is desirable to simplify the identification of structural epitopes, as this would extend the spectrum of novel epitopes to be detected.

Serine-threonine protein phosphatase 2A (PP2A) is a trimeric holoenzyme that plays an integral role in the regulation of cell growth, differentiation, and apoptosis. The substrate specificity and (sub)cellular localization of the PP2A holoenzymes are highly regulated by interaction with a family of regulatory B subunits (PP2A-Bs). The regulatory subunit PP2A-B/PR55δ (PP2A-Bδ) is involving in the dephosphorylation of PP2A substrates and is crucial for controlling entry into and exit from mitosis. The molecular mechanisms involved in the regulation of expression of PP2A-Bδ gene (PPP2R2D) remain largely unknown. To explore genetic variations in the 5′-flanking region of PPP2R2D gene as well as their frequent haplotypes in the Han Chinese population and determine whether such variations have an impact on transcriptional activity, DNA samples were collected from 70 healthy Chinese donors and sequenced for identifying genetic variants in the 5′-flanking region of PPP2R2D. Four genetic variants were identified in the 1836 bp 5′-flanking region of PPP2R2D. Linkage disequilibrium (LD) patterns and haplotype profiles were constructed for the genetic variants. Using serially truncated human PPP2R2D promoter luciferase constructs, we found that a 601 bp (−540 nt to +61 nt) fragment constitutes the core promoter region. The subcloning of individual 5′-flanking fragment revealed the existence of three haplotypes in the distal promoter of PPP2R2D. The luciferase reporter assay showed that different haplotypes exhibited distinct promoter activities. The EMSA revealed that the −462 G>A variant influences DNA-protein interactions involving the nuclear factor 1 (NF1). In vitro reporter gene assay indicated that cotransfection of NF1/B expression plasmid could positively regulate the activity of PPP2R2D proximal promoter. Introduction of exogenous NF1/B expression plasmid further confirmed that the NF1 involves in the regulation of PPP2R2D gene expression. Our findings suggest that functional genetic variants and their haplotypes in the 5′-flanking region of PPP2R2D are critical for transcriptional regulation of PP2A-Bδ.

Macrosatellites are some of the most polymorphic regions of the human genome, yet many remain uncharacterized despite the association of some arrays with disease susceptibility. This study sought to explore the polymorphic nature of the X-linked macrosatellite DXZ4. Four aspects of DXZ4 were explored in detail, including tandem repeat copy number variation, array instability, monomer sequence polymorphism and array expression. DXZ4 arrays contained between 12 and 100 3.0 kb repeat units with an average array containing 57. Monomers were confirmed to be arranged in uninterrupted tandem arrays by restriction digest analysis and extended fiber FISH, and therefore DXZ4 encompasses 36–288 kb of Xq23. Transmission of DXZ4 through three generations in three families displayed a high degree of meiotic instability (8.3%), consistent with other macrosatellite arrays, further highlighting the unstable nature of these sequences in the human genome. Subcloning and sequencing of complete DXZ4 monomers identified numerous single nucleotide polymorphisms and alleles for the three microsatellite repeats located within each monomer. Pairwise comparisons of DXZ4 monomer sequences revealed that repeat units from an array are more similar to one another than those originating from different arrays. RNA fluorescence in situ hybridization revealed significant variation in DXZ4 expression both within and between cell lines. DXZ4 transcripts could be detected originiating from both the active and inactive X chromosome. Expression levels of DXZ4 varied significantly between males, but did not relate to the size of the array, nor did inheritance of the same array result in similar expression levels. Collectively, these studies provide considerable insight into the polymorphic nature of DXZ4, further highlighting the instability and variation potential of macrosatellites in the human genome.

Using random PCR amplification followed by plasmid subcloning and DNA sequencing, we detected bocavirus related sequences in 9 out of 17 porcine stool samples. Using primer walking, we sequenced the nearly complete genomes of two highly divergent bocaviruses we provisionally named porcine bocavirus 1 isolate H18 (PBoV1-H18) and porcine bocavirus 2 isolate A6 (PBoV2-A6) which differed by 51.8% in their NS1 protein. Phylogenetic analysis indicated that PBoV1-H18 was very closely related to a ∼2 Kb central region of a porcine bocavirus-like virus (PBo-LikeV) from Sweden described in 2009. PBoV2-A6 was very closely related to the porcine bocavirus genomes PBoV-1 and PBoV2 from China described in 2010. Among 340 fecal samples collected from different age, asymptomatic swine in five Chinese provinces, the prevalence of PBoV1-H18 and PBoV2-A6 related viruses were 45-75% and 55-70% respectively, with 30-47% of pigs co-infected. PBoV1-A6 related strains were highly conserved, while PBoV2-H18 related strains were more diverse, grouping into two genotypes corresponding to the previously described PBoV1 and PBoV2. Together with the recently described partial bocavirus genomes labeled V6 and V7, a total of three major porcine bocavirus clades have therefore been described to date. Further studies will be required to elucidate the possible pathogenic impact of these diverse bocaviruses either alone or in combination with other porcine viruses.

Current cloning technologies based on site-specific recombination are efficient, simple to use, and flexible, but have the drawback of leaving recombination site sequences in the final construct, adding an extra 8 to 13 amino acids to the expressed protein. We have devised a simple and rapid subcloning strategy to transfer any DNA fragment of interest from an entry clone into an expression vector, without this shortcoming. The strategy is based on the use of type IIs restriction enzymes, which cut outside of their recognition sequence. With proper design of the cleavage sites, two fragments cut by type IIs restriction enzymes can be ligated into a product lacking the original restriction site. Based on this property, a cloning strategy called ‘Golden Gate’ cloning was devised that allows to obtain in one tube and one step close to one hundred percent correct recombinant plasmids after just a 5 minute restriction-ligation. This method is therefore as efficient as currently used recombination-based cloning technologies but yields recombinant plasmids that do not contain unwanted sequences in the final construct, thus providing precision for this fundamental process of genetic manipulation.

Although cloning and expression of T-cell Receptors (TcRs) has been performed for almost two decades, these procedures are still challenging. For example, the use of T-cell clones that have undergone limited expansion as starting material to limit the loss of interesting TcRs, must be weighed against the introduction of mutations by excess PCR cycles. The recent interest in using specific TcRs for cancer immunotherapy has, however, increased the demand for practical and robust methods to rapidly clone and express TcRs. Two main technologies for TcR cloning have emerged; the use of a set of primers specifically annealing to all known TcR variable domains, and 59-RACE amplification. We here present an improved 59-RACE protocol that represents a fast and reliable way to identify a TcR from 105 cells only, making TcR cloning feasible without a priori knowledge of the variable domain sequence. We further present a detailed procedure for the subcloning of TcRa and b chains into an expression system. We show that a recombination-based cloning protocol facilitates simple and rapid transfer of the TcR transgene into different expression systems. The presented comprehensive method can be performed in any laboratory with standard equipment and with a limited amount of starting material. We finally exemplify the straightforwardness and reliability of our procedure by cloning and expressing several MART-1-specific TcRs and demonstrating their functionality. © 2011 Wälchli et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.