Search

Objective: This multicenter, randomized, double-blind, placebo-controlled, crossover trial aimed to evaluate whether prolonged noisy galvanic vestibular stimulation improves body balance in patients with vestibulopathy. Materials and methods: This trial was registered in the Japan Pharmaceutical Information Center Clinical Trials Information registry (jRCT1080224083). Subjects were 20- to 85-year-old patients who had been unsteady for more than one year and whose symptoms had persisted despite more than six months of rehabilitation. Enrolled subjects were randomly assigned to one of two groups; one group received the optimal intensity of noisy galvanic vestibular stimulation first and then the placebo 14 days later, the other was evaluated in the reverse order. The primary outcome was the difference of the mean percent change from the baseline in the velocity of center of pressure during 3 h of stimulation between the noisy galvanic vestibular stimulation and placebo periods. This was analyzed with the mixed effects model. Results: Forty-two subjects were enrolled. The mean percent change in the velocity during stimulation for 3 h was -9.3% (SD 19.9%) for noisy galvanic vestibular stimulation and -12.6% (SD 15.0%) for placebo. No significant effects of noisy galvanic vestibular stimulation over placebo were found for velocity in the least-squares means of the difference [3.1% (95% CI -0.2 to 6.4, p = 0.066)]. Conclusion: Prolonged noisy galvanic vestibular stimulation did not significantly improve body balance in patients with poorly-compensated vestibulopathy. [ABSTRACT FROM AUTHOR]

Objective: To explore the impact of aerobic and resistance training on walking and balance abilities (UPDRS-III, Gait Velocity, Mini-BESTest, and TUG) in individuals with Parkinson's disease (PD). Method: All articles published between the year of inception and July 2024 were obtained from PubMed, Embase, and Web of Science. Meta-analysis was conducted with RevMan 5.4. Result: Research from 15 randomized controlled trials, comprising 792 older patients with a diagnosis of PD, was included in the analysis. Aerobic training (AT) and Resistance training (RT) significantly improved UPDRS-III (AT, SMD = -5.69, 95% CI: -8.67 to -2.71, p = 0.0002, I2 = 82%; RT, SMD = -3.01, 95% CI: -4.89 to -1.12, p = 0.002, I2 = 0%) and Gait Velocity(AT, SMD = 0.88, 95% CI: 0.58 to 1.18, p < 0.00001, I2 = 42%; RT, SMD = 0.52, 95% CI: 0.10 to 0.94, p = 0.01, I2 = 55%). AT showed no difference in Mini-BESTest (AT, SMD = 2.12, 95% CI: -0.70 to 4.94, p = 0.14, I2 = 90%). RT showed no change in TUG (RT, SMD = -0.03, 95% CI: -1.60 to 1.54, p = 0.97, I2 = 63%). Conclusions: Resistance training stood out as the most effective approach to boost performance on the mini-BESTest. Conversely, aerobic exercise proved to be superior for improving the UPDRS-III, gait velocity and TUG scores. [ABSTRACT FROM AUTHOR]

Negative foot speed (i.e., the speed of the backward and downward motion of the foot relative to the body at ground contact) is a strong predictor of sprinting performance. Inertial measurement units (IMUs) are becoming a popular approach for assessing sports performance. The primary aim of this study was to use IMUs to investigate the relationship between negative foot speed and top running speed attained during a sprint on an outdoor track. The secondary aim of this study was to use IMUs to investigate the relationship between initial contact foot velocity and running speed on a stride-by-stride basis for a sprint on an outdoor track. Seventeen participants performed 80-meter track sprints while wearing a shoe-mounted IMU. The anteroposterior component, vertical component, and magnitude of the velocity of the foot at initial contact was extracted from the IMU for each stride. For the mean peak stride speed of 7.98±0.78m/s and average stride speed of 7.43±0.68m/s, the adjusted R2 values were 0.27 and 0.69, 0.42 and 0.64, and 0.42 and 0.75 versus the anteroposterior, vertical, and magnitude of initial contact foot velocity, respectively. In conclusion, our findings support the common coaching tip of increasing negative foot speed to improve sprint speed. In addition, the results of this study support the use of IMUs for quantifying sprinting technique with actionable metrics. [ABSTRACT FROM AUTHOR]

The axial misalignment and tip clearance of the double spiral seals are important indexes affecting the sealing performance of the double spiral seals. In practical engineering applications, the sealing ability of double spiral seals is greatly affected by axial misalignment and tip clearance, and the coupling of assembly parameters and structural parameters of double spiral seals leads to the difficulty of seal design and use. A numerical model of spiral seals was established, and the velocity field, pressure field and critical sealing ability of double spiral seals were simulated and calculated. The influence of different axial misalignment displacements and different tip clearances on the sealing ability of double spiral seals was analyzed. The influence of axial misalignment displacement, tip clearance and rotor speed on the sealing performance of double spiral seals is obtained. The above research results provide a design basis for the engineering application of double spiral seals. [ABSTRACT FROM AUTHOR]

Background: Erectile dysfunction (ED) is a prevalent condition in urology, and studies on the effectiveness of platelet-rich plasma (PRP) for this condition have been conducted; however, the evidence remains inconclusive. This meta-analysis aimed to evaluate the effectiveness of PRP in treating ED. Methods: On May 17, 2024, a literature search was performed and evaluated using the Cochrane method. The primary outcome measured was the International Index of Erectile Function (IIEF) score, while the secondary outcomes included Minimal Clinically Important Difference (MCID) and peak systolic velocity (PSV). Results: A total of 12 controlled trials involving 991 patients and 11 single-arm trials with 377 patients were analyzed. The findings revealed that compared to the control group, the PRP group demonstrated better outcomes in terms of the IIEF score and MCID (SMD = 0.59 (95% CI: [0.34, 0.84]; RR = 1.94 (95% CI: [1.33, 2.83]), In the single-arm trials, a significant improvement in IIEF scores was observed following PRP treatment (SMD = -0.99 95% CI: [-1.53, 0.46]). Conclusion: PRP appears effective in treating erectile dysfunction, but further high-quality, large-sample trials with longer follow-up are needed to fully understand its effects. [ABSTRACT FROM AUTHOR]

In this paper, we explore different methods to detect patterns in the activity of bus rapid transit (BRT) systems focusing on two aspects of transit: infrastructure and the movement of vehicles. To this end, we analyze records of velocity and position of each active vehicle in nine BRT systems located in the Americas. We detect collective patterns that characterize each BRT system obtained from the statistical analysis of velocities in the entire system (global scale) and at specific zones (local scale). We analyze the velocity records at the local scale applying the Kullback-Leibler divergence to compare the vehicular activity between zones. This information is organized in a similarity matrix that can be represented as a network of zones. The resulting structure for each system is analyzed using network science methods. In particular, by implementing community detection algorithms on networks, we obtain different groups of zones characterized by similarities in the movement of vehicles. Our findings show that the representation of the dataset with information of vehicles as a network is a useful tool to characterize at different scales the activity of BRT systems when geolocalized records of vehicular movement are available. This general approach can be implemented in the analysis of other public transportation systems. [ABSTRACT FROM AUTHOR]

Barbell squats are commonly utilized in resistance training for rehabilitation, daily living enhancement, and improving sports performance. The current study investigated the kinematic and electromyographic (EMG) parameters in the squat between sexes across different repetition ranges (1-, 3-, 6-, and 10-RM) among recreationally strength-trained subjects. A total of 26 subjects (13 men: age 25 ± 3.5 years, height 178.2 ± 5.8 cm, weight 82.3 ± 9.1 kg; 13 women: age 24 ± 4.1 years, height 165.4 ± 6.3 cm, weight 68.2 ± 8.7 kg) participated in the study. The level of significance was set at p<0.05. The findings revealed no sex-specific differences in average barbell velocity across repetition ranges. However, the 1-RM showed a significantly lower average velocity compared to the final repetition of other repetition ranges (p<0.001), with the last repetition at 10-RM revealing a significantly higher velocity (p<0.001). Women had greater maximal angular hip extension velocity in the final repetitions of the 6- and 10-RM (p≤0.035, ηp2≤0.20), while both sexes displayed lower maximal angular knee extension velocity in the final repetition of the 10-RM (p = 0.028, ηp2 = 0.15). Moreover, men had lower EMG amplitude in the rectus femoris (3- and 10-RM), soleus, and lateral vastus (10-RM) compared to women (p≥0.011, ηp2≥0.26). It was concluded that 10-RM differed greatly in kinematics and EMG, suggesting different fatigue mechanisms compared to other repetition ranges with heavier loads. Furthermore, sex differences in EMG and angular hip extension velocity might imply sex-specific fatiguing mechanisms during high-repetition squats. These considerations could be important when prescribing training programs. [ABSTRACT FROM AUTHOR]

Understanding the contribution vision has to dynamic balance control may help in understanding where/why loss of balance occurs during everyday locomotion. The current study determined how body-centre-of-mass (BCoM) dynamics and postural stability when moving to and holding a single-limb-stance (SS) or an up-on-the-toes (UTT) position were affected by visual occlusion. From standing on a force platform, 18 adults (mean (SD) 26.7 (4.8) years; 1.73 (0.08) m; 84.0 (22.9) kg; 7 females) completed repeated trials (x3) with and without vision in which they moved to either a SS or an UTT position (order countered-balanced), and attempted to hold that position for 2 (SS) or 5 (UTT) seconds before returning to standing. UTT trials were also repeated at a fast speed, and SS trials were repeated using both the dominant and non-dominant limb. BCoM dynamics were assessed by analysing the displacement and peak velocity of the centre-of-pressure (CoP) when moving to and from the SS and UTT positions. Balance stability was the variability in the CoP displacement/velocity when holding these positions. Results indicate that under visual occlusion, the peak CoP velocity when moving to the SS or UTT position was reduced (ES, 0.67 and 0.68, respectively), suggesting greater caution. Both the variability in the CoP displacement/velocity when holding these positions and the peak CoP velocity when returning to flat-standing increased (SS: ES, 1.0 and 0.86, respectively; UTT: ES 1.26 and 0.66, respectively), suggesting, respectively, greater instability and poorer control. The poorer control in SS trials, occurred when returning to standing from the SS position held on the non-dominant limb, and correspondingly, the reduction in SS duration when vision was occluded was greater for the non-dominant limb trails (limb-vision interaction; p = 0.042). This suggests that movements initiated/controlled by the non-dominant limb are more reliant on visual feedback than those initiated/controlled by the dominant limb. [ABSTRACT FROM AUTHOR]

This study was conducted to investigate the effect of core stability training program on ball-kicking velocity, running speed, and agility in adolescent male football players. To this end, 36 male football players aged 12–14 were divided into the training group and control group. Before implementing the core stability training program, participants' ball-kicking velocity, sprint speed, and agility performance were measured with a Bushnell velocity radar gun, 20 m sprint test, and 505 agility test, respectively, in both training group and control group. After the measurements, the training group followed core stability training program three days a week, for eight weeks in addition to the routine training program, while the control group followed the routine training program only. Ball-kicking velocity, sprint speed, and agility performance were re-measured in both groups after the completion of the core stability training program. Significant improvements were detected in all parameters, i.e., ball-kicking velocity, sprint speed, and agility performance in the training group (p<0.05). On the other hand, in the control group, no significant change was detected in the ball-kicking velocity and sprint speed (p>0.05), whereas a significant improvement was observed in agility performance (p<0.05). Inter-group comparisons revealed statistically significant differences between the groups in ball-kicking velocity and sprint speed in favor of the training group (p<0.05), while no significant difference was found between the groups in agility performance (p>0.05). In conclusion, this study's findings suggest that core stability exercises can be incorporated into the routine training program of adolescent male football players. [ABSTRACT FROM AUTHOR]

This study presents a novel approach to modeling the velocity-time curve in 100m sprinting by integrating machine learning algorithms. It critically addresses the limitations of traditional speed models, which often require extensive and intricate data collection, by proposing a more accessible and accurate method using fewer variables. The research utilized data from various international track events from 1987 to 2019. Two machine learning models, Random Forest (RF) and Neural Network (NN), were employed to predict the velocity-time curve, focusing on the acceleration phase of the sprint. The models were evaluated against the traditional exponential speed model using Mean Squared Error (MSE), with the NN model demonstrating superior performance. Additionally, the study explored the correlation between maximum velocity, the time of maximum velocity occurrence, the duration of the maximum speed phase, and the overall 100m sprint time. The findings indicate a strong negative correlation between maximum velocity and final time, offering new insights into the dynamics of sprinting performance. This research contributes significantly to the field of sports science, particularly in optimizing training and performance analysis in sprinting. [ABSTRACT FROM AUTHOR]

The neuronal differences contributing to the etiology of autism spectrum disorder (ASD) are still not well defined. Previous studies have suggested that myelin and axons are disrupted during development in ASD. By combining structural and diffusion MRI techniques, myelin and axons can be assessed using extracellular water, aggregate g-ratio, and a new approach to calculating axonal conduction velocity termed aggregate conduction velocity, which is related to the capacity of the axon to carry information. In this study, several innovative cellular microstructural methods, as measured from magnetic resonance imaging (MRI), are combined to characterize differences between ASD and typically developing adolescent participants in a large cohort. We first examine the relationship between each metric, including microstructural measurements of axonal and intracellular diffusion and the T1w/T2w ratio. We then demonstrate the sensitivity of these metrics by characterizing differences between ASD and neurotypical participants, finding widespread increases in extracellular water in the cortex and decreases in aggregate g-ratio and aggregate conduction velocity throughout the cortex, subcortex, and white matter skeleton. We finally provide evidence that these microstructural differences are associated with higher scores on the Social Communication Questionnaire (SCQ) a commonly used diagnostic tool to assess ASD. This study is the first to reveal that ASD involves MRI-measurable in vivo differences of myelin and axonal development with implications for neuronal and behavioral function. We also introduce a novel formulation for calculating aggregate conduction velocity, that is highly sensitive to these changes. We conclude that ASD may be characterized by otherwise intact structural connectivity but that functional connectivity may be attenuated by network properties affecting neural transmission speed. This effect may explain the putative reliance on local connectivity in contrast to more distal connectivity observed in ASD. [ABSTRACT FROM AUTHOR]

To interact successfully with moving objects in our environment we need to be able to predict their behavior. Predicting the position of a moving object requires an estimate of its velocity. When flow parsing during self-motion is incomplete–that is, when some of the retinal motion created by self-motion is incorrectly attributed to object motion–object velocity estimates become biased. Further, the process of flow parsing should add noise and lead to object velocity judgements being more variable during self-motion. Biases and lowered precision in velocity estimation should then translate to biases and lowered precision in motion extrapolation. We investigated this relationship between self-motion, velocity estimation and motion extrapolation with two tasks performed in a realistic virtual reality (VR) environment: first, participants were shown a ball moving laterally which disappeared after a certain time. They then indicated by button press when they thought the ball would have hit a target rectangle positioned in the environment. While the ball was visible, participants sometimes experienced simultaneous visual lateral self-motion in either the same or in the opposite direction of the ball. The second task was a two-interval forced choice task in which participants judged which of two motions was faster: in one interval they saw the same ball they observed in the first task while in the other they saw a ball cloud whose speed was controlled by a PEST staircase. While observing the single ball, they were again moved visually either in the same or opposite direction as the ball or they remained static. We found the expected biases in estimated time-to-contact, while for the speed estimation task, this was only the case when the ball and observer were moving in opposite directions. Our hypotheses regarding precision were largely unsupported by the data. Overall, we draw several conclusions from this experiment: first, incomplete flow parsing can affect motion prediction. Further, it suggests that time-to-contact estimation and speed judgements are determined by partially different mechanisms. Finally, and perhaps most strikingly, there appear to be certain compensatory mechanisms at play that allow for much higher-than-expected precision when observers are experiencing self-motion–even when self-motion is simulated only visually. [ABSTRACT FROM AUTHOR]

The motion of a single active particle in one dimension with quenched disorder under the external force is investigated. Within the tailored parameter range, anomalous diffusion that displays weak ergodicity breaking is observed, i.e., non-ergodic subdiffusion and non-ergodic superdiffusion. This non-ergodic anomalous diffusion is analyzed through the time-dependent probability distributions of the particle's velocities and positions. Its origin is attributed to the relative weights of the locked state (predominant in the subdiffusion state) and running state (predominant in the superdiffusion state). These results may contribute to understanding the dynamical behavior of self-propelled particles in nature and the extraordinary response of nonlinear dynamics to the externally biased force. [ABSTRACT FROM AUTHOR]

The aim of this study was to compare the effects of rest redistribution (RR) on kinetics and kinematics during the hang pull (HP). Twenty-one male athletes (age 29.5 ± 4.3 years, height 1.78 ± 0.07 m, body mass 75.17 ± 11.11 kg, relative one repetition maximum [1RM] power clean [PC] 1.17 ± 0.14 kg.kg-1) performed the HP using 140% of 1RM PC with 3 traditional sets of 6 repetitions (TS), 9 sets of 2 repetitions with RR [45s rest after 2 repetitions] (RR45) and 6 sets of 3 repetitions with RR [72s rest after 3 repetitions] (RR72). Peak velocity (PV) was higher during RR72 (1.18 ± 0.11 m.s-1) compared to RR45 (1.14 ± 0.11 m.s-1) for the average of 18 repetitions (p = 0.025, g = 0.36). There was a main effect for set configuration with greater peak force (PF) (p < 0.001, g = 0.14) during RR72 compared to RR45, with greater PV and impulse (p < 0.001, g = 0.19–0.36) during RR72 compared to RR45. There was also greater peak velocity maintenance (PVM) (p = 0.042, g = 0.44) for RR72 compared to RR45. There were no significant or meaningful differences (p > 0.05, g = 0.00–0.59) between configurations for any other variables. Rest redistribution protocols did not result in significantly or meaningfully greater kinetics or kinematics during the HP when compared to a TS protocol; although performing RR72 resulted in higher PF, PV, and impulse, with improved PVM compared to RR45. [ABSTRACT FROM AUTHOR]

Background: Tensiomyography measures the radial displacement of a muscle during an electrically evoked twitch contraction. Different concepts to determine the rate of displacement (Vc) from the maximum twitch exist, but information on their reproducibility is scarce. Further, different inter-stimuli intervals during progressive stimulation are used, but the effect of different intervals on Vc is unclear. Objectives: The first aim of this study was to investigate the within and between-day reliability of the five most frequently used Vc concepts. The second aim was to investigate the effect of different inter-stimuli intervals on Vc. Methods: On two consecutive days, we determined Vc of the biceps femoris long head and rectus femoris of twenty-four healthy subjects. The maximum displacement was determined twice within three minutes on day one and a third time 24 h later. Also, on day two, we applied three blocks of ten consecutive stimuli at a constant intensity of 50 mA, separated by 3 min each. Inter-stimuli intervals in randomly ordered blocks were 10 s, 20 s or 30 s, respectively. Results: All Vc concepts displayed good to excellent relative (ICC 0.87–0.99) and generally good absolute within- and between-day reliability for both muscles. Across Vc-concepts, absolute reliability was higher for the rectus femoris (CV% 1.3–7.95%) compared to the biceps femoris (CV% 6.06–15.30%). In both muscles, Vc was generally not affected by different inter-stimuli intervals. For most Vc concepts, repeated stimulation induced an increase regardless of the inter-stimuli interval, but this effect was mainly trivial and small at most. Conclusions: The reproducibility of Vc concepts was generally good but varies between different muscles. A rest interval of 10 s seems preferable to longer intervals for less time required per measurement. Following this initial study, the effect of different inter-stimuli intervals on Vc should be further investigated. [ABSTRACT FROM AUTHOR]

The Ti-6Al-4V titanium alloy is a kind of light alloy material with high specific strength, corrosion resistance and heat resistance. Because of its excellent performance, it has become an important material in aerospace industry. However, this kind of alloy has very poor machinability, and rapid tool wear is a very serious problem in titanium alloy processing. At present, it is difficult to guarantee the ultra-precision machining quality of titanium alloy materials, which limits its application in high-tech fields. In order to solve this problem, the influence of cutting speed on ultra-precision cutting process of titanium alloy was analyzed comprehensively. and it was found that better surface quality could be obtained at lower cutting speed. In order to study the influence of cutting speed in ultra-precision cutting of titanium alloys, cutting experiments have been carried out. Additionally, a finite element model was established to analyze the ultra-precision cutting process. Also, the constitutive model, damage model, friction model, and heat transfer in the modeling process were discussed. The chip morphology, cutting temperature, cutting force, and surface morphology under different cutting velocities are analyzed by simulation. Then, the simulation results were compared with the experimental results. The findings show that cutting speed has great influence on the ultra-precision turning of the Ti-6Al-4V alloy and the surface roughness obtained by ultra-precision cutting of titanium alloy can be lower than 20 nm at a lower cutting speed. [ABSTRACT FROM AUTHOR]

Changes in species distribution in response to climate change might challenge the territorial boundaries of protected areas. Amazonia is one of the global regions most at risk of developing long distances between current and future analogous climates and the emergence of climate conditions without analogs in the past. As a result, species present within the network of Protected Areas (PAs) of Amazonia may be threatened throughout the 21st century. In this study, we investigated climate velocity based on future and past climate-analogs using forward and backward directions in the network of PAs of Amazonia, in order to assess the climatic risk of these areas to climate change and verify their effectiveness in maintaining the current climate conditions. Using current (1970–2000) and future (2041–2060) average annual air temperature and precipitation data with a resolution of 10 km, climate velocities across the entire Amazon biome and average climate velocities of PAs and Indigenous Lands (ILs) were evaluated. The results show that the effects of backward velocity will be greater than that of forward velocity in the Amazon biome. However, the PA network will be less exposed to backward velocity impacts than unprotected areas (UAs)–emphasizing the importance of these areas as a conservation tool. In contrast, for the forward velocity impacts, the PA network will be slightly more exposed than UAs–indicating that the current spatial arrangement of the PA network is still not the most suitable to minimize impacts of a possible climate redistribution. In addition, a large extent of no-analog climates for backward velocities was found in central Amazonia, indicating that high temperatures and changes in precipitation patterns in this region will surpass the historical variability of the entire biome, making it a potentially isolated and unsuitable climatic envelope for species in the future. Most of the no-analog climates are in PAs, however the climate risks in ILs should also be highlighted since they presented higher climate velocities than PAs in both metrics. Our projections contrast with the median latitudinal migration rate of 2 km/year observed in most ecosystems and taxonomic groups studied so far and suggest the need for median migration rates of 7.6 km/year. Thus, despite the important role of PAs and ILs as conservation tools, they are not immune to the effects of climate change and new management strategies, specific to each area and that allow adaptation to global changes, will be necessary. [ABSTRACT FROM AUTHOR]

Strength is a crucial performance indicator for evaluating the durability of pervious concrete (PC). However, there are few models for estimating the remaining strength of in-service PC in sulfate and dry-wet cycle circumstances. Even though there are already direct detection methods for strength, nondestructive testing methods are still worth additional research. This paper aims to give a calculation model for the residual strength of PC under corrosion conditions based on ultrasonic methods, which is economical and convenient for engineering applications. The apparent morphological, compressive strength, and ultrasonic velocity of PC against sulfate and dry-wet cycle attack were examined. The results highlight that the primary cause of the macroscopic mechanical deterioration is the worsening in interface strength. Furthermore, the compressive strength and ultrasonic wave velocity of PC followed the same trends during sulfate and dry-wet cycles, increasing first and subsequently decreasing. Additionally, using the curve-fitting approach, an empirical model of strength deterioration based on ultrasonic velocity was developed and validated utilizing experimental data, demonstrating that the proposed model could more accurately define the strength progression. The results can provide an effective calculation method for monitoring the residual strength of PC pavement engineering in a corrosive environment. [ABSTRACT FROM AUTHOR]

Aim: This study aimed to i) determine the load-velocity relationship in the seated chest press in older adults, ii) compare the magnitude of the relationship between peak and mean velocity with the relative load, and iii) analyze the differences between sexes in movement velocity for each relative load in the chest press. Material and methods: Thirty-two older adults (17 women and 15 men; 79.6±7.7 years) performed a chest press progressive loading test up to the one-repetition maximum (1RM). The fastest peak and mean velocity reached with each weight were analyzed. Quadratic equations were developed for both sexes and the effectiveness of the regression model was analyzed through a residual analysis. The equations were cross-validated, considering the holdout method. The independent samples t-test analyzed i) the differences in the magnitude of the relationship between peak and mean velocity with the relative load and ii) the differences between sexes in the peak and mean velocity for each relative load. Results: It was possible to observe very strong quadratic load-velocity relationships in the seated chest press in women (peak velocity: r2 = 0.97, standard error of the estimate (SEE) = 4.5% 1RM; mean velocity: r2 = 0.96, SEE = 5.3% 1RM) and men (peak velocity: r2 = 0.98, SEE = 3.8% 1RM; mean velocity: r2 = 0.98, SEE = 3.8% 1RM) without differences (p>0.05) in the magnitude of the relationship between peak and mean velocity with the relative load. Furthermore, there was no overfitting in the regression models due to the high and positive correlation coefficients (r = 0.98–0.99). Finally, men presented higher (p<0.001) lifting velocities than women in almost all relative loads, except for 95–100% 1RM (p>0.05). Conclusion: Measuring repetition velocity during the seated chest press is an objective approach to estimating the relative load in older adults. Furthermore, given the velocity differences between older women and men at submaximal loads, it is recommended to use sex-specific equations to estimate and prescribe the relative loads in older adults. [ABSTRACT FROM AUTHOR]

The upper bound limit analysis method is one of the main approaches to check the basal stability of foundation pits against upheaval. However, existing studies have often failed to consider the effects of external supporting structures, including isolation piles and others, on basal stability against upheaval. This study derives a formula for the coefficient of basal stability against upheaval under the action of isolation piles by simplifying the pile-soil relationship and systematically examines the impact of isolation pile parameters on basal stability against upheaval using the theory of continuous velocity fields and the upper bound limit analysis method. A comparison of simulation results indicates that this technique can accurately identify the variation trend of basal stability against upheaval under the influence of isolation piles and achieve high calculation precision under the operating conditions of wide foundation pits and short isolation piles. Accordingly, a moderate increase in isolation pile parameters produces a significant supporting effect for narrowed foundation pits. Whereas for wide foundation pits, the supporting capacity of isolation piles can be maximized when pile length equals excavation depth. [ABSTRACT FROM AUTHOR]

Despite a paucity of physiological evidence, simplistic biomechanical analyses have led researchers to assume that humans who have wider hips use more energy to walk. Pitting biomechanical first principles against physiological data has led to little deepening of our understanding of bipedalism and its evolution. Both approaches, however, use proxies for the energy used by muscles. We decided to approach the question directly. Using a musculoskeletal model of the human body that estimates the metabolic energy expenditure of muscle activation for 48 people (23 women), 752 trials were evaluated. Metabolic energy consumption for the abductor muscles was summed over a stride to create total abductor energy expenditure. We calculated the maximum hip joint moment acting in the coronal plane and the functional distance between the hip joint centers. We hypothesize that wider hips would be correlated with both maximum coronal plane hip moment and increased total abductor energy expenditure when mass and velocity were controlled. Linear regressions with multiple independent variables, clustered by participant to control for the non-independence of the data points, were performed in Stata. We found that hip width does not predict total abductor energy expenditure, although mass and velocity combine to predict 61% of the variation (both p<0.001). Maximum hip joint coronal plane moment is predicted by pelvic width (p<0.001) and, in combination with mass and velocity (both p<0.001), explains 79% of the variation. Our results indicate that people use their morphology in ways that limit differences in energy expenditure. Consistent with recent discussion, intraspecific variation might not be useful to understand differences among species. [ABSTRACT FROM AUTHOR]

Pressure drop is an important indicator that affects the filtration performance of the pleated filter, and the deposition of dust particles within the pleats is crucial to the evolution of the pressure drop. In this study, the pressure drop during PM10 loading process was investigated for a series of V-shaped and U-shaped filters with a pleat height of 20 mm and different pleat ratios (the ratio of pleat height to pleat width: α = 0.71–3.57). In the numerical simulations, numerical models suitable for different pleated geometries were obtained through experimental verification on the local air velocity. Then, assuming that the dust cake thickness is proportional to the normal air velocity of the filters, the variation of the pressure drop with the dust deposition is derived by means of successive numerical simulations. This simulation method saved a significant amount of CPU time required for the growth of dust cake. It was found that the relative average deviations between experimental and simulated pressure drops were 3.12% and 1.19% for V-shaped and U-shaped filters, respectively. Furthermore, it was found that under the same pleat ratio and the mass of dust deposition per unit area, both the pressure drop and unevenness of normal air velocity of the U-shaped filter were lower than the V-shaped filter. Therefore, the U-shaped filter is recommended due to its better filtration performance. [ABSTRACT FROM AUTHOR]

In this study, 23 subjects produced cyclic transitions between rounded vowels and unrounded vowels as in /o-i-o-i-o-.../ at two specific speaking rates. Rounded vowels are typically produced with a lower larynx position than unrounded vowels. This contrast in vertical larynx position was further amplified by producing the unrounded vowels with a higher pitch than the rounded vowels. The vertical larynx movements of each subject were measured by means of object tracking in laryngeal ultrasound videos. The results indicate that larynx lowering was on average 26% faster than larynx raising, and that this velocity difference was more pronounced in woman than in men. Possible reasons for this are discussed with a focus on specific biomechanical properties. The results can help to interpret vertical larynx movements with regard to underlying neural control and aerodynamic conditions, and to improve movement models for articulatory speech synthesis. [ABSTRACT FROM AUTHOR]

To interact successfully with moving objects in our environment we need to be able to predict their behavior. Predicting the position of a moving object requires an estimate of its velocity. When flow parsing during self-motion is incomplete–that is, when some of the retinal motion created by self-motion is incorrectly attributed to object motion–object velocity estimates become biased. Further, the process of flow parsing should add noise and lead to object velocity judgements being more variable during self-motion. Biases and lowered precision in velocity estimation should then translate to biases and lowered precision in motion extrapolation. We investigate this relationship between self-motion, velocity estimation and motion extrapolation with two tasks performed in a realistic virtual reality (VR) environment: first, participants are shown a ball moving laterally which disappears after a certain time. They then indicate by button press when they think the ball would have hit a target rectangle positioned in the environment. While the ball is visible, participants sometimes experience simultaneous visual lateral self-motion in either the same or in the opposite direction of the ball. The second task is a two-interval forced choice task in which participants judge which of two motions is faster: in one interval they see the same ball they observed in the first task while in the other they see a ball cloud whose speed is controlled by a PEST staircase. While observing the single ball, they are again moved visually either in the same or opposite direction as the ball or they remain static. We expect participants to overestimate the speed of a ball that moves opposite to their simulated self-motion (speed estimation task), which should then lead them to underestimate the time it takes the ball to reach the target rectangle (prediction task). Seeing the ball during visually simulated self-motion should increase variability in both tasks. We expect to find performance in both tasks to be correlated, both in accuracy and precision. [ABSTRACT FROM AUTHOR]

Background: The vibration-induced postural reaction paradigm (VIB-PR) offers a unique way for investigating sensorimotor control mechanisms. Measures of VIB-PR are usually calculated from the whole VIB period, yet recent evidence proposed that distinctive mechanisms are likely at play between the early vs. later phases of the postural reaction. Objectives: The present work verified if spatiotemporal analyses of center of pressure (COP) displacements can detect differences between these early/later phases of VIB-PR. Also, we further characterized the intra/inter-individual variability of COP measurements, since the underlying variability of VIB-PR remains largely unexplored. Methods: Twenty young volunteers realized two experimental conditions of bipodal stance with eyes closed: (i) bilateral VIB of tibialis anterior (TIB) and (ii) Achilles' (ACH) tendons. Each condition consisted of five trials and lasted 30 s as follows: 10 s baseline, 10 s VIB and 10 s post-VIB. Linear COP variables (antero-posterior (AP) amplitude & velocity) were computed for both VIB and post-VIB periods using the following time-windows: early 2 s, the later 8 s and the whole 10 s duration. Intra- and inter-individual variability were respectively estimated using the standard error of the measurement and the coefficient of variation. Both variability metrics were obtained using five vs. the first three trials. Results: Significant contrasts were found between time-windows for both VIB and post-VIB periods. COP variables were generally higher during the early 2 s phase compared to the later 8 s phase for both TIB [mean difference between 8 s– 2 s phases: Amplitude AP = -1.11 ± 1.14 cm during VIB and -2.99 ± 1.31 during post-VIB; Velocity AP = -1.17 ± 0.86 cm/s during VIB and -3.13 ± 1.31 cm/s during post-VIB] and ACH tendons [Amplitude AP = -0.37 ± 0.98 cm during VIB and -3.41 ± 1.20 during post-VIB; Velocity AP = -0.31 ± 0.59 cm/s during VIB and -3.89 ± 1.52 cm/s during post-VIB]. Most within- and between-subject variability scores were below 30% and using three instead of five trials had no impact on variability. VIB-PR patterns were quite similar within a same person, but variable behaviors were observed between individuals during the later phase. Conclusion: Our study highlights the relevance of identifying and separately analyzing distinct phases within VIB-PR patterns, as well as characterizing how these patterns vary at the individual level. [ABSTRACT FROM AUTHOR]

Objective: The intensity of barbell bench press exercise is generally prescribed as the load to be lifted for a specific number of repetitions; however, other factors (e.g., execution velocity) can affect bench press exercise intensity. Moreover, no study assessed whether load distribution (i.e., the distance between the disc stacks on the two sides of the barbell) affects exercise intensity. The present study aims to assess how different combinations of load, velocity, and barbell load distribution affect the number of repetitions to failure (REPfailure), and rating of perceived exertion (RPEfatigue) and number of repetitions (REPfatigue) at fatigue onset. Methods: Ten males (age 23.3±1.8 years) performed bench press exercises to exhaustion using random combinations of three loads (50%, 65%, and 80% of 1 repetition maximum), three execution velocities (50%, 70%, and 90% of maximal concentric velocity), and two load distributions (narrow and wide). Three separate three-way repeated-measures ANOVAs were performed to assess the effect of load, velocity, and load distribution on REPfailure, RPEfatigue, and REPfatigue expressed as a percentage of REPfailure. Results: REPfailure was affected by load (p<0.001), velocity (p<0.001), and distribution (p = 0.005). The interactions between load and velocity (p<0.001) and load and distribution (p = 0.004) showed a significant effect on REPfailure, whereas the interaction between velocity and distribution was not significant (p = 0.360). Overall, more REPfailure were performed using lower loads, higher velocities, and a wider distribution. RPEfatigue and REPfatigue were affected by load (p<0.001 and p = 0.007, respectively) and velocity (p<0.001 and p<0.001, respectively), and not by distribution (p = 0.510 and p = 0.571, respectively) or the two-way interaction effects. Overall, using higher loads yielded higher RPEfatigue but lower REPfatigue, while RPEfatigue and REPfatigue were higher when slower velocities were used. Conclusion: The current investigation shows that not only load but also velocity and barbell load distribution may influence bench press training volume and perceived exertion. [ABSTRACT FROM AUTHOR]

Purpose: Differentiating between acute viral and bacterial infection is challenging due to the similarity in symptom presentation. Blood tests can assist in the diagnosis, but they reflect the immediate status and fail to consider the dynamics of an inflammatory response with time since symptom onset. We applied estimated C-reactive protein (CRP) velocity (eCRPv), as derived from the admission CRP level divided by time from symptom onset, in order to better distinguish between viral and bacterial infections. Methods: This cross-sectional study included patients admitted to the emergency department with a confirmed viral (n = 83) or bacterial (n = 181) infection. eCRPv was defined as the ratio between the absolute CRP level upon admission to time from symptom onset (in hours). Absolute CRP and eCRPv values were compared between the 3 groups. Results: Bacterial patients presented with higher CRP levels (133 mg/L) upon admission compared to viral patients (23.31 mg/L) (P < 0.001). Their median value of eCRPv velocity was 4 times higher compared to the viral patients (1.1 mg/L/h compared 0.25 mg/L/h, P < 0.001). Moreover, in intermediate values of CRP (100–150 mg/L) upon admission, in which the differential diagnosis is controversial, high eCRPv is indicative of bacterial infection, eCRPv >4 mg/L/h represents only bacterial patients. Conclusions: During an acute febrile illness, the eCRPv value can be used for rapid differentiation between bacterial and viral infection, especially in patients with high CRP values. This capability can potentially expedite the provision of appropriate therapeutic management. Further research and validation may open new applications of the kinetics of inflammation for rapid diagnosis of an infectious vs. a viral source of fever. [ABSTRACT FROM AUTHOR]

The colloidal particle transport process in all porous media from laboratory to nature is affected by gravity. In this paper, a mathematical model of colloidal particle migration in a saturated porous medium with the gravity effect is established by combining the gap velocity (advection) with the settling velocity (gravity effect), and an analytical solution of the particle migration problem with time variation of the particle injection intensity is obtained using an integral transformation. The correctness and rationality of the analytical solution are verified by comparing the experimental and theoretical results of the particle migration problem in the point-source transient injection mode. The analytical solution can easily analyze the colloid transport experimental data in a variety of seepage directions. Analysis of the influence of seepage velocities in three different seepage directions on particle transport parameters shows: under the same seepage direction, the peak value of the breakthrough curve increased with an increase in the seepage velocity. The dispersion, adsorption coefficient, and deposition rate decreased with an increase in the seepage velocity. Under the same seepage velocity, the peak value of the breakthrough curve from large to small was vertically downward (VD)> horizontal (H)> vertically upward (VU), the order of dispersion from large to small was vertically downward (VD)>horizontal (H) >vertically upward (VU), the order of the adsorption coefficient and deposition rate of particles from large to small was vertically upward (VU)> horizontal (H) >vertically downward (VD), and the smaller the seepage velocity, the greater the relative differences in the peak value of the breakthrough curve, dispersion, the particle adsorption coefficient, and the deposition rate in the different seepage directions. Therefore, gravity is an important mechanism of particle migration in saturated porous media. The larger the particle size and density were, the smaller the seepage velocity was and the more obvious the effect of gravity. The findings of this study can help for better understanding of colloidal transport properties in porous media under the coupled effects of gravity and hydrodynamics. [ABSTRACT FROM AUTHOR]

Quantification of key gait parameters plays an important role in assessing gait deficits in clinical research. Gait parameter estimation using lower-limb kinematics (mainly leg velocity data) has shown promise but lacks validation for the amputee population. The aim of this study is to assess the accuracy of lower-leg angular velocity to predict key gait events (toe-off and heel strike) and associated temporal parameters for the amputee population. An open data set of reflexive markers during treadmill walking from 10 subjects with unilateral transfemoral amputation was used. A rule-based dual-minima algorithm was developed to detect the landmarks in the shank velocity signal indicating toe-off and heel strike events. Four temporal gait parameters were also estimated (step time, stride time, stance and swing duration). These predictions were compared against the force platform data for 3000 walking cycles from 239 walking trials. Considerable accuracy was achieved for the HS event as well as for step and stride timings, with mean errors ranging from 0 to -13ms. The TO prediction exhibited a larger error with its mean ranging from 35-81ms. The algorithm consistently predicted the TO earlier than the actual event, resulting in prediction errors in stance and swing timings. Significant differences were found between the prediction for sound and prosthetic legs, with better TO accuracy on the prosthetic side. The prediction accuracy also appeared to improve with the subjects' mobility level (K-level). In conclusion, the leg velocity profile, coupled with the dual-minima algorithm, can predict temporal parameters for the transfemoral amputee population with varying degrees of accuracy. [ABSTRACT FROM AUTHOR]

The impact-induced fragmentation of rock is widely and frequently encountered when natural hazards occur in mountainous areas. This type of fragmentation is an important and complex natural process that should be described. In this study, laboratory impact tests under different impact velocities were first conducted using a novel gas-driven rock impact apparatus. The three-dimensional digital image correlation (3D DIC) technique was used to monitor the dynamic fragmentation process upon impact. Then, coupled 3D finite-discrete element method (FDEM) numerical simulations were performed to numerically investigate the energy and damage evolutions and fragmentation characteristics of the sample under different impact velocities. The laboratory test results show that as the impact velocity increases, the failure pattern of the rock sample gradually changes from shear failure to splitting failure, and the fragmentation intensity increases obviously. The strain localization area gradually increases as the impact velocity increases and as the location gradually deviates away from the impacting face. In the numerical simulation, the proposed model is validated by quasi-static uniaxial compression tests and impact tests. The numerical simulations clearly show the progressive fracture process of the samples, which agrees well with the experimental observations. The evolutions of energy and damage variables were also derived based on the simulation results, which are markedly affected by the impact velocity. The fragment size distributions based on mass and number can be well fitted using a generalized extreme value law. Finally, the distribution of the fragment flying velocity and angle are analyzed. [ABSTRACT FROM AUTHOR]

Common geometrical layouts could potentially be bottlenecks, particularly during emergency and high density situations. When pedestrians are interacting with such complex geometrical settings, the congestion effect might not be uniform over the bottleneck area. This study uses the trajectory data collected through a controlled laboratory experiment to explore the spatial variation of speeds when a group of people navigates through bends. Four turning angles, i.e., 45°, 90°, 135° and 180°, with a straight corridor and two speed levels, i.e., normal speed walking and slow running (jogging), were considered in these experiments. Results explained that the speeds are significantly different over the space within the bend for all angles (except 0°) under both speed levels. In particular, average walking speeds are significantly lower near the inner corner of the bend as compared to the outer corner. Further, such speed variations are magnified when the angle of the bend and desired speed increase. These outcomes indicate that even smaller turning angles, e.g., 45° could create bottlenecks near the inner corner of the bend, particularly when the walking speeds are high. The findings of this study could be useful in understanding the congestion and bottleneck effects associated with complex geometrical settings, and calibrating microscopic simulation tools to accurately reproduce such effects. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the acute and delayed effects of medicine ball throws and resistance training in ball velocity and accuracy of serve, forehand and backhand in young competition tennis players. A crossover-randomized design was used with 10 competition tennis players (6 girls and 4 boys between 14 and 18 years old). The subjects performed 6 stroke test sessions, 3 for each strength protocol. The velocity and accuracy of strokes were measured before (basal situation), 3 minutes, 24 and 48 hours after the protocol. Medicine ball throws protocol was performed by accomplishing 3 sets of 6 repetitions using a 2 kg ball, throwing it at maximal speed. Resistance training protocol was performed by accomplishing 3 sets of 6 repetitions at 75% one-repetition maximum, lifting the load at maximal speed of bench press, dead lift, one hand row and half squat. There were no significant (p > 0.05) differences in all strokes, regarding ball velocity and accuracy after each method and each recovery time, compared to the basal situation. These results suggest that medicine ball throws and resistance training methods have no acute and delayed detrimental effects on stroke velocity and accuracy in young competition tennis players. [ABSTRACT FROM AUTHOR]

The front retaining wall (FRW) is an effective facility of selective withdrawal. Previous research has not estimated the effect of FRWs on the thermal regimes of reservoirs and outflow temperature, which are crucial to reservoir ecology. For this purpose, taking the Dongqing Reservoir as a case study, a two-dimensional hydrodynamic CE-QUAL-W2 model was configured for the typical channel-type reservoir in the southwestern Guizhou Province, to better understand the influence of FRWs on the thermal structure and outflow temperature. The simulated data from January to September 2017 showed that FRWs can change the vertical temperature distribution during the stratification period, accelerate the upper warmer water release and thus decrease the strength of thermal stratification. The stratification structure changed from a single thermocline to double thermoclines in August. An FRW resulted in an average 11.8 m increase in the thickness of the hypolimnion and a 1.2°C decrease in the thickness of the thermocline layer. An FRW increased the outflow temperature by 0.4°C and raised the withdrawal elevation by 16 m on average. The longitudinal velocity increased compared with the non-FRW condition, while the maximum velocity position moved up. In addition, FRWs can continuously obtain surface warmer water without manual operation and have low investment and good construction conditions. This study can provide an available selective withdrawal idea for reservoirs with similar hydraulic conditions. [ABSTRACT FROM AUTHOR]

The aims of this study were to examine the relationship between anthropometric variables, physical performance, and functional test with serve velocity regarding tennis players' level and to design regression models that effectively predict serve velocity. A sample of sixteen male tennis players participated in this study (national level = 8, professional level = 7). Anthropometric measurements (body mass, height, body mass index and body segments) and physical test (hand strength, countermovement jump, jump on serve, and serve velocity) and functional test (medicine ball throw overhead and shot put) were performed. No differences in anthropometrics and physical test were found between national and professional levels. A significant positive correlation (p < 0.05, ranging for 0.603 to 0.932) was found between some anthropometrics measurements (body mass, height, arm, forearm, and leg segments), physical parameters (hand strength, countermovement jump) and functional test (medicine ball throw shot put and overhead) with serve velocity for all tennis players. Multiple regression analysis indicated that medicine ball throw shot put was the most important test to explain serve velocity (r2 = 0.869). The results showed how the combination of physical and anthropometric factors have an impact on serve velocity. In addition, a new functional fitness test (medicine ball throw shot put) is proposed as an alternative to traditional medicine ball throw overhead due to its high reproducibility (inter-trial reliability) and predictive validity values, as well as by multi-segmental coordination movement similar to tennis serve. [ABSTRACT FROM AUTHOR]

Bench press is a popular training-exercise in throw related sports such as javelin, baseball and handball. Athletes in these sports often use bouncing (i.e., letting the barbell collide with the chest) to create an increased momentum to accelerate the barbell upwards before completing the movement by throwing the barbell. Importantly, the effects of the bouncing technique in bench press have not been examined. Therefore, the aim of this study was to compare the effects of bench press throw with (BPTbounce) or without bounce (BPT) on throwing velocity (penalty and 3-step), 1-repetition maximum (1-RM) and average power output (20-60kg) in bench press among handball players. Sixteen male amateur handball players (7.1±1.9 years of handball experience) were randomly allocated to an eight-week supplementary power training program (2 x week-1) with either the BPT or BPTbounce. Except for the bounce technique, the training programs were identical and consisted of 3 sets with 3–5 repetitions at 40–60% of 1-RM with maximal effort in free-weight barbell bench press throw. The results revealed no significant differences between the groups in any of the tests (p = 0.109–0.957). However, both groups improved penalty throw (BPT; 4.6%, p<0.001, ES = 0.57; BPTbounce; 5.1%, p = 0.008, ES = 0.91) and 1-RM (BPT; 9.7%, p<0.001, ES = 0.49; BPTbounce; 8.7%, p = 0.018, ES = 0.60), but only the BPT improved the 3-step throw (BPT; 2.9%, p = 0.060, ES = 0.38; BPTbounce; 2.3%, p = 0.216, ES = 0.40). The BPT improved power output only at 20kg and 30kg loads (9.1% and 12.7%; p = 0.018–0.048, ES = 0.43–0.51) whereas BPTbounce demonstrated no significant differences across the loads (p = 0.252–0.806). In conclusion, the bounce technique demonstrated similar effects on throwing velocity, muscle strength and muscle power output as conventional bench press throw without the bounce technique. [ABSTRACT FROM AUTHOR]

Background: There has been a surge of interest on velocity-based training (VBT) in recent years. However, it remains unclear whether VBT is more effective in improving strength, jump, linear sprint and change of direction speed (CODs) than the traditional 1RM percentage-based training (PBT). Objectives: To compare the training effects in VBT vs. PBT upon strength, jump, linear sprint and CODs performance. Data sources: Web of science, PubMed and China National Knowledge Infrastructure (CNKI). Study eligibility criteria: The qualified studies for inclusion in the meta-analysis must have included a resistance training intervention that compared the effects of VBT and PBT on at least one measure of strength, jump, linear sprint and CODs with participants aged ≥16 yrs. and be written in English or Chinese. Methods: The modified Pedro Scale was used to assess the risk of bias. Random-effects model was used to calculate the effects via the mean change and pre-SD (standard deviation). Mean difference (MD) or Standardized mean difference (SMD) was presented correspondently with 95% confidence interval (CI). Results: Six studies met the inclusion criteria including a total of 124 participants aged 16 to 30 yrs. The differences of training effects between VBT and PBT were not significant in back squat 1RM (MD = 3.03kg; 95%CI: -3.55, 9.61; I2 = 0%) and load velocity 60%1RM (MD = 0.02m/s; 95%CI: -0.01,0.06; I2 = 0%), jump (SMD = 0.27; 95%CI: -0.15,0.7; I2 = 0%), linear sprint (MD = 0.01s; 95%CI: -0.06, 0.07; I2 = 0%), and CODs (SMD = 0.49; 95%CI: -0.14, 1.07; I2 = 0%). Conclusion: Both VBT and PBT can enhance strength, jump, linear sprint and CODs performance effectively without significant group difference. [ABSTRACT FROM AUTHOR]

Objective: To investigate whether fetuses with accelerated third trimester growth velocity are at increased risk of shoulder dystocia, even when they are not large-for-gestational-age (LGA; estimated fetal weight (EFW) >95th centile). Methods: Fetal growth velocity and birth outcome data were prospectively collected from 347 nulliparous women. Each had blinded ultrasound biometry performed at 28 and 36 weeks' gestation. Change in EFW and abdominal circumference (AC) centiles between 28–36 weeks were calculated, standardised over exactly eight weeks. We examined the odds of shoulder dystocia with increasing EFW and AC growth velocities among women with 36-week EFW ≤95th centile (non-LGA), who went on to have a vaginal birth. We then examined the relative risk (RR) of shoulder dystocia in cases of accelerated EFW and AC growth velocities (>30 centiles gained). Finally, we compared the predictive performances of accelerated fetal growth velocities to 36-week EFW >95th centile for shoulder dystocia among the cohort planned for vaginal birth. Results: Of the 226 participants who had EFW ≤95th centile at 36-week ultrasound and birthed vaginally, six (2.7%) had shoulder dystocia. For each one centile increase in EFW between 28–36 weeks, the odds of shoulder dystocia increased by 8% (odds ratio (OR [95% Confidence Interval (CI)]) = 1.08 [1.04–1.12], p<0.001). For each one centile increase in AC between 28–36 weeks, the odds of shoulder dystocia increased by 9% (OR[95%CI] = 1.09 [1.05–1.12], p<0.001). When compared to the rest of the cohort with normal growth velocity, accelerated EFW and AC velocities were associated with increased relative risks of shoulder dystocia (RR[95%CI] = 7.3 [1.9–20.6], p = 0.03 and 4.8 [1.7–9.4], p = 0.02 respectively). Accelerated EFW or AC velocities predicted shoulder dystocia with higher sensitivity and positive predictive value than 36-week EFW >95th centile. Conclusions: Accelerated fetal growth velocities between 28–36 weeks' gestation are associated with increased risk of shoulder dystocia, and may predict shoulder dystocia risk better than the commonly used threshold of 36-week EFW >95th centile. [ABSTRACT FROM AUTHOR]

The present article presents a novel idea regarding the implementation of Tiwari and Das model on Reiner-Philippoff fluid (RPF) model by considering blood as a base fluid. The Cattaneo-Christov model and thermal radiative flow have been employed to study heat transfer analysis. Tiwari and Das model consider nanoparticles volume fraction for heat transfer enhancement instead of the Buongiorno model which heavily relies on thermophoresis and Brownian diffusion effects for heat transfer analysis. Maxwell velocity and Temperature slip boundary conditions have been employed at the surface of the sheet. By utilizing the suitable transformations, the modeled PDEs (partial-differential equations) are renewed in ODEs (ordinary-differential equations) and treated these equations numerically with the aid of bvp4c technique in MATLAB software. To check the reliability of the proposed scheme a comparison with available literature has been made. Other than Buongiorno nanofluid model no attempt has been made in literature to study the impact of nanoparticles on Reiner-Philippoff fluid model past a stretchable surface. This article fills this gap available in the existing literature by considering novel ideas like the implementation of carbon nanotubes, CCHF, and thermal radiation effects on Reiner-Philippoff fluid past a slippery expandable sheet. Momentum, as well as temperature slip boundary conditions, are never studied and considered before for the case of Reiner-Philippoff fluid past a slippery expandable sheet. In the light of physical effects used in this model, it is observed that heat transfer rate escalates as a result of magnification in thermal radiation parameter which is 18.5% and skin friction coefficient diminishes by the virtue of amplification in the velocity slip parameter and maximum decrement is 67.9%. [ABSTRACT FROM AUTHOR]

Fungal hyphal growth and branching are essential traits that allow fungi to spread and proliferate in many environments. This sustained growth is essential for a myriad of applications in health, agriculture, and industry. However, comparisons between different fungi are difficult in the absence of standardized metrics. Here, we used a microfluidic device featuring four different maze patterns to compare the growth velocity and branching frequency of fourteen filamentous fungi. These measurements result from the collective work of several labs in the form of a competition named the "Fungus Olympics." The competing fungi included five ascomycete species (ten strains total), two basidiomycete species, and two zygomycete species. We found that growth velocity within a straight channel varied from 1 to 4 μm/min. We also found that the time to complete mazes when fungal hyphae branched or turned at various angles did not correlate with linear growth velocity. We discovered that fungi in our study used one of two distinct strategies to traverse mazes: high-frequency branching in which all possible paths were explored, and low-frequency branching in which only one or two paths were explored. While the high-frequency branching helped fungi escape mazes with sharp turns faster, the low-frequency turning had a significant advantage in mazes with shallower turns. Future work will more systematically examine these trends. [ABSTRACT FROM AUTHOR]

This document is a correction notice for an article titled "Numerical investigation of LDL nanoparticle collision in coronary artery grafts with porous wall and different implantation angles and two state of inlet velocity." The correction addresses an error in the equation in the Surfaces and parameter subsection of Results. The correct equation is provided in the notice. Additionally, the corresponding author's email address is corrected to r.karimian@alumni.iut.ac.ir. The publisher apologizes for the errors. [Extracted from the article]

Exposure to urban environments requires more cognitive processing than exposure to nature; an effect that can even be measured analysing gait kinematics whilst people walk towards photographic images. Here, we investigated whether differences in cognitive load between nature and urban scenes are still present when scenes are matched for their liking scores. Participants were exposed to images of nature and urban scenes that had been matched a priori for their liking scores by an independent participant sample (n = 300). Participants (N = 44) were either asked to memorise each image during walking or to rate each image for its visual discomfort after each walk. Irrespective of experimental task, liking score but not environment type predicted gait velocity. Moreover, subjective visual discomfort was predictive of gait velocity. The positive impact of nature described in the literature thus might, at least in part, be due to people's aesthetic preferences for nature images. [ABSTRACT FROM AUTHOR]

Affective sharing is a bottom-up process involving automatic processing of sensory inputs that facilitate vicarious experience of another's emotional state. It is grounded directly in the prior experiences of the perceiver. In adults, vicarious ratings of affective touch match the known velocity tuning and hypothesised anatomical distribution of C-tactile afferents (CT), a subclass of C-fibre which respond preferentially to low force/velocity stroking touch, typically perceived as pleasant. Given the centrality of touch to early nurturing interactions, here we examined whether primary school aged children's vicarious ratings of affective touch show the same anatomical and velocity specific patterns reported in adults. Forty-four children aged between 8 and 11 (mean age 9, 24 male) rated a sequence of video clips depicting one individual being touched by another on 5 different upper-body sites (palm, dorsal forearm, ventral forearm, upper-arm and back) at 3 different velocities (static, CT optimal, slow stroking and non-CT optimal, fast stroking). Immediately after viewing each clip, participants were asked to rate how pleasant they perceived the touch to be. While children rated the CT optimal velocity significantly higher than static or non-CT optimal touch, unlike adults their ratings did not vary across skin sites. This difference may reflect the fact children's ratings are grounded in bottom-up affective resonance while adults also draw on top-down cognitive evaluation of the broader social context when rating the stimuli. [ABSTRACT FROM AUTHOR]

Background: Impaired growth among infants remains one of the leading nutrition problems globally. In this study, we aimed to compare the growth trajectory rate and evaluate growth trajectory characteristics among children, who are HIV exposed uninfected (HEU) and HIV unexposed uninfected (HUU), under two years in Zambia. Method: Our study used data from the ROVAS II study (PACTR201804003096919), an open-label randomized control trial of two verses three doses of live, attenuated, oral RotarixTM administered 6 &10 weeks or at 6 &10 weeks plus an additional dose at 9 months of age, conducted at George clinic in Lusaka, Zambia. Anthropometric measurements (height and weight) were collected on all scheduled and unscheduled visits. We defined linear growth velocity as the rate of change in height and estimated linear growth velocity as the first derivative of the mixed effect model with fractional polynomial transformations and, thereafter, used the second derivative test to determine the peak height and age at peak heigh. Results: We included 212 infants in this study with median age 6 (IQR: 6–6) weeks of age. Of these 97 (45.3%) were female, 35 (16.4%) were stunted, and 59 (27.6%) were exposed to HIV at baseline. Growth velocity was consistently below the 3rd percentile of the WHO linear growth standard for HEU and HUU children. The peak height and age at peak height among HEU children were 74.7 cm (95% CI = 73.9–75.5) and 15.5 months (95% CI = 14.7–16.3) respectively and those for HUU were 73 cm (95% CI = 72.1–74.0) and 15.6 months (95% CI = 14.5–16.6) respectively. Conclusion: We found no difference in growth trajectories between infants who are HEU and HUU. However, the data suggests that poor linear growth is universal and profound in this cohort and may have already occurred in utero. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the between-session reliability of single-leg performance and asymmetry variables during unilateral and bilateral countermovement jumps (CMJ). Twenty-three basketball players completed two identical sessions which consisted of four unilateral CMJs (two with each leg) and two bilateral CMJs. Mean and peak values of force, velocity and power, impulse, and jump height were obtained separately for each leg using a dual force platform. All performance variables presented an acceptable reliability (CVrange = 4.05–9.98%) with the exceptions of jump height for the unilateral CMJs and mean power, peak velocity, peak power, and impulse for the left leg during the bilateral CMJ (CV≥11.0%). Nine out of 14 variables were obtained with higher reliability during the unilateral CMJ (CVratio≥1.16), and 4 out of 14 during the bilateral CMJ (CVratio≥1.32). Asymmetry variables always showed an unacceptable reliability (ICCrange = 0.15–0.64) and poor/slight levels of agreement in direction (Kapparange = -0.10 to 0.15) for the unilateral CMJ, while an acceptable reliability (ICCrange = 0.74–0.77) and substantial levels of agreement in direction (Kapparange = 0.65 to 0.74) were generally obtained for the bilateral CMJ. These results suggest that single-leg performance can be obtained with higher reliability during the unilateral CMJ, while the bilateral CMJ provides more consistent measures of inter-limb asymmetries. [ABSTRACT FROM AUTHOR]

The purpose of the study was to evaluate predicted maturity offset (time before age at PHV) and age at PHV (chronological age [CA] minus maturity offset) in a longitudinal sample of 58 under-13 club level soccer players in central Portugal for whom ages at PHV were estimated with the SITAR model. Two maturity offset prediction equations were applied: the original equation which requires CA sitting height, estimated leg length, height and weight, and a modified equation which requires CA and height. Predicted maturity offset increased, on average, with CA at prediction throughout the age range considered, while variation in predicted maturity offset and ages at PHV within CA groups was considerably reduced compared to variation in observed ages at offset and at PHV. Predicted maturity offset and ages at PHV were consistently later than observed maturity offset and age at PHV among early maturing players, and earlier than observed in late maturing players. Both predicted offset and ages at PHV with the two equations were, on average, later than observed among players maturing on time. Intra-individual variation in predicted ages at PHV with each equation was considerable. The results for soccer players were consistent with similar studies in the general population and two recent longitudinal studies of soccer players. The results question the utility of predicted maturity offset and age at PHV as valid indicators of maturity timing and status. [ABSTRACT FROM AUTHOR]

A model of myocardial electromechanics is suggested. It combines modified and simplified versions of previously published models of cardiac electrophysiology, excitation-contraction coupling, and mechanics. The mechano-calcium and mechano-electrical feedbacks, including the strain-dependence of the propagation velocity of the action potential, are also accounted for. The model reproduces changes in the twitch amplitude and Ca2+-transients upon changes in muscle strain including the slow response. The model also reproduces the Bowditch effect and changes in the twitch amplitude and duration upon changes in the interstimulus interval, including accelerated relaxation at high stimulation frequency. Special efforts were taken to reduce the stiffness of the differential equations of the model. As a result, the equations can be integrated numerically with a relatively high time step making the model suitable for multiscale simulation of the human heart and allowing one to study the impact of myocardial mechanics on arrhythmias. [ABSTRACT FROM AUTHOR]

Background: It was shown that single repetition, contraction-phase specific and total time-under-tension (TUT) can be extracted reliably and validly from smartphone accelerometer-derived data of resistance exercise machines using user-determined resistance exercise velocities at 60% one repetition maximum (1-RM). However, it remained unclear how robust the extraction of these mechano-biological descriptors is over a wide range of movement velocities (slow- versus fast-movement velocity) and intensities (30% 1-RM versus 80% 1-RM) that reflect the interindividual variability during resistance exercise. Objective: In this work, we examined whether the manipulation of velocity or intensity would disrupt an algorithmic extraction of single repetitions, contraction-phase specific and total TUT. Methods: Twenty-seven participants performed four sets of three repetitions of their 30% and 80% 1-RM with velocities of 1 s, 2 s, 6 s and 8 s per repetition, respectively. An algorithm extracted the number of repetitions, single repetition, contraction-phase specific and total TUT. All exercises were video-recorded. The video recordings served as the gold standard to which algorithmically-derived TUT was compared. The agreement between the methods was examined using Limits of Agreement (LoA). The Pearson correlation coefficients were used to calculate the association, and the intraclass correlation coefficient (ICC 2.1) examined the interrater reliability. Results: The calculated error rate for the algorithmic detection of the number of single repetitions derived from two smartphones accelerometers was 1.9%. The comparison between algorithmically-derived, contraction-phase specific TUT against video, revealed a high degree of correlation (r > 0.94) for both exercise machines. The agreement between the two methods was high on both exercise machines, intensities and velocities and was as follows: LoA ranged from -0.21 to 0.22 seconds for single repetition TUT (2.57% of mean TUT), from -0.24 to 0.22 seconds for concentric contraction TUT (6.25% of mean TUT), from -0.22 to 0.24 seconds for eccentric contraction TUT (5.52% of mean TUT) and from -1.97 to 1.00 seconds for total TUT (5.13% of mean TUT). Interrater reliability for single repetition, contraction-phase specific TUT was high (ICC > 0.99). Conclusion: Neither intensity nor velocity disrupts the proposed algorithmic data extraction approach. Therefore, smartphone accelerometers can be used to extract scientific mechano-biological descriptors of dynamic resistance exercise with intensities ranging from 30% to 80% of the 1-RM with velocities ranging from 1 s to 8 s per repetition, respectively, thus making this simple method a reliable tool for resistance exercise mechano-biological descriptors extraction. [ABSTRACT FROM AUTHOR]

The present work explores the distinctive contribution of motor planning and control to human reaching movements. In particular, the movements were triggered by the selection of a prepotent response (Dominant) or, instead, by the inhibition of the prepotent response, which required the selection of an alternative one (Non-dominant). To this end, we adapted a Go/No-Go task to investigate both the dominant and non-dominant movements of a cohort of 19 adults, utilizing kinematic measures to discriminate between the planning and control components of the two actions. In this experiment, a low-cost, easy to use, 3-axis wrist-worn accelerometer was put to good use to obtain raw acceleration data and to compute and break down its velocity components. The values obtained with this task indicate that with the inhibition of a prepotent response, the selection and execution of the alternative one yields both a longer reaction time and movement duration. Moreover, the peak velocity occurred later in time in the non-dominant response with respect to the dominant response, revealing that participants tended to indulge more in motor planning than in adjusting their movement along the way. Finally, comparing such results to the findings obtained by other means in the literature, we discuss the feasibility of an accelerometer-based analysis to disentangle distinctive cognitive mechanisms of human movements. [ABSTRACT FROM AUTHOR]

Body and head shape among fishes both vary between environments influenced by water velocity and across ontogeny. Although the shape changes associated with variation in average water velocity and ontogeny are well documented, few studies have tested for the interaction between these two variables (i.e., does ontogenetic shape variation differ between velocity environments). We use geometric morphometrics to characterize shape differences in Trichomycterus areolatus, a freshwater catfish found in high and low-velocity environments in Chile. We identify a significant interaction between velocity environment and body size (i.e., ontogeny). Ontogenetic patterns of shape change are consistent with other studies, but velocity environment differentially affects the ontogenetic trajectory of shape development in T. areolatus. Shape change over ontogeny appears more constrained in high-velocity environments compared to low-velocity environments. [ABSTRACT FROM AUTHOR]

The analysis of visually guided tracking movements is important to the understanding of imitation exercises and movements carried out using the human visuomotor control system. In this study, we analyzed the characteristics of visuomotor control in the intermittent performance of circular tracking movements by applying a system that can differentiate between the conditions of invisible and visible orbits and visible and invisible target phases implemented in a 3D VR space. By applying visuomotor control based on velocity control, our study participants were able to track objects with visible orbits with a precision of approximately 1.25 times greater than they could track objects with invisible orbits. We confirmed that position information is an important parameter related to intermittent motion at low speeds (below 0.5 Hz) and that tracked target velocity information could be obtained more precisely than position information at speeds above 0.5 Hz. Our results revealed that the feedforward (FF) control corresponding to velocity was delayed under the visible-orbit condition at speeds over 0.5 Hz, suggesting that, in carrying out imitation exercises and movements, the use of visually presented 3D guides can interfere with exercise learning and, therefore, that the effects of their use should be carefully considered. [ABSTRACT FROM AUTHOR]