Search

In this work, the polymerization of Limonene Oxide (LO) has been achieved using an Earth abundant metal-based catalyst developed in our group, that is very active in ring opening polymerization (ROP) processes. The bio-based polylimonene ether (PLO) obtained had low molecular weight and good thermal properties, thus being a potential green polymeric additive for other bio-based polymers such as PLA. Hence, we have explored its ability to influence PLA properties. The addition of only 10 wt %, led to the modification and improvement of PLA properties in terms of flexibility, thermal stability, and hydrophobicity. The results obtained are promising and open up the potential industrial application of PLO for the melt-processing of blends based on PLA/PLO. These new materials are totally based on renewable sources and may be interesting for many applications where biodegradability and reduced water adsorption is required, such as food packaging or agricultural mulch films. Image 1 • Polymerization of Limonene Oxide was achieved with an aluminium catalyst. • PLO is an efficient green additive for PLA able to modify its properties. • PLO increase the flexibility, the thermal stability and the surface hydrophobicity of PLA. • PLO is a promising industrial plasticizer totally derived from renewable sources. • PLA/PLO blends can be used for potential agricultural applications. [ABSTRACT FROM AUTHOR]

The replacement of fossil-derived plastics with those obtained from bio-based resources, which present suitable performance to be employed as commodity plastics is currently an important field of research, given the urgent need to transition from a fossil-based to a more sustainable economy. In this context, this work is focused on the application of a catalytic system based on silsesquioxane-cyclopentadienyl titanium complexes for the preparation of bio-based polymers, which can be used as additives to improve the poor material properties of a biodegradable polymer such as poly(lactic acid) (PLA). These titanium complexes, when activated with methylaluminoxane or with triflate salts, are shown to be capable of the polymerization of two bio-based monomers: myrcene and anethole. It is notable that polymerizations with these two distinct monomers take place through different mechanisms. The resulting polymyrcene (PMy) and polyanethol (PAN) have been applied as modifiers for PLA. Binary blends of PMy and PLA exhibited a considerable decrease in T g and the promotion of PLA crystallization for a PMy content below 15 wt%. The mechanical properties of the PLA/PMy blends also displayed plasticization, with a decrease in the elastic modulus and enhanced plasticity, which resulted in less fragile systems compared to pure PLA. Morphological analysis has indicated a partially miscible, phase-separated system with micron-sized domains. In contrast, PAN completely inhibited PLA crystallization and the PLA/PAN blends were immiscible, but well-dispersed, a phase-separated system was obtained in solvent-casting film preparation with very small PAN domains. The blends showed higher tensile modulus than pure PLA and an absence of plastic behaviour, resulting in more fragile systems upon the addition of PAN to PLA. [Display omitted] • Polymerization of bio-based monomers (myrcene and anethol) using titanium catalysts is presented. • The bio-based polymyrcene and polyanethol obtained, were used as modifiers for poly(lactic acid) (PLA). • It was found that polymyrcene acts as a plasticizer, reducing the fragility of pure PLA. • However, polyanethol completely inhibits PLA crystallization. [ABSTRACT FROM AUTHOR]