Search

The orientation of the dispersed phase and crystals in the injection-molded bar of an impact polypropylene copolymer (IPC) containing isotactic polypropylene (iPP), ethylene-propylene rubber (EPR) and a β-nucleating agent (β-NA) were studied simultaneously. In the IPC, iPP and EPR act as the matrix and dispersed phase, respectively. The EPR is amorphous and the iPP is crystallizable in α- and β-crystalline forms in the presence of the β-NA. The orientation and orientation distribution for both of the EPR phase and the iPP crystals, as well as the crystallization behavior of iPP, were investigated by two-dimensional wide-angle X-ray diffraction (2D-WAXD), two-dimensional small-angle X-ray scattering (2D-SAXS), scanning electron microscope (SEM) and differential scanning calorimetry (DSC). The results of the experiment show that orientation exists for both the EPR phase and the iPP crystals. But their orientation distribution manifests an opposite tendency. The EPR phase was observed to be highly oriented in the core layer but the orientation of the iPP crystals was weakened gradually from skin to core. The difference in the orientation behavior between the EPR phase and the iPP crystals reflects the distinct response of the micrometer-scale EPR particles and nanometer-scale iPP chains upon the flow field and temperature gradient in the mold. The diffraction geometry of the β-crystals has also been discussed in detail. The observations in this study may shed light on the study in the structure and property relationship for the IPC injection-molded products. • The orientation of the rubber phase and polypropylene crystals were studied simultaneously in an impact propylene copolymer (IPC). • Morphology, calorimetry, and X-ray methods were applied. • The rubber particles and polypropylene crystals were oriented differently. • The orientation of the polypropylene in the presence of the β-nucleating agent was analyzed. • The findings are important for the research and application of IPC. [ABSTRACT FROM AUTHOR]