Search

The molecule N,N′-bis(3-methylphenyl)-N,N′-dyphenylbenzidine (TPD) has been widely used in optoelectronic applications, mainly for its hole-transporting properties, but also for its capability to emit blue light and amplified spontaneous emission, which is important for the development of organic lasers. Here, we report deep-blue-emitting distributed feedback (DFB) lasers based on TPD dispersed in polystyrene (PS), as active media, and dichromated gelatin layers with holographically engraved relief gratings, as laser resonators. The effect of the device architecture (with the resonator located below or on top of the active layer) is investigated with a dye (TPD) that can be doped into PS at higher rates (up to 60 wt%), than with previously used dyes (&lt, 5 wt%). This has enabled changing the index contrast between film and resonator, which has an important effect on the laser performance. With regards to thresholds, both architectures behave similarly for TPD concentrations above 20 wt%, while for lower concentrations, top-layer resonator devices show lower values (around half). Remarkably, the operational durability of top-layer resonator devices is larger (in a factor of around 2), independently of the TPD concentration. This is a consequence of the protection offered by the resonator against dye photo-oxidation when the device is illuminated with pulsed UV light.

In this study, high-order distributed-feedback (DFB) polymer lasers were comparatively investigated. Their performance relies on multiple lasing directions and their advantages include their high manufacturing tolerances due to the large grating periods. Nine laser cavities were fabricated by spin-coating the gain polymer films onto a grating structure, which was manufactured via interference lithography that operated at the 2nd, 3rd, and 4th DFB orders. Low threshold lasing and high slope efficiency were achieved in high-order DFB polymer lasers due to the large grating groove depth and the large gain layer thickness. A high-order DFB configuration shows possible advantages, including the ability to control the lasing direction and to achieve multiple-wavelength lasers. Furthermore, our investigation demonstrates that the increase in threshold and decrease in slope efficiency with an increase in the feedback order can be limited by controlling the structural parameters.

This paper provides a review of advances in conjugated polymer lasers. High photoluminescence efficiencies and large stimulated emission cross-sections coupled with wavelength tunability and low-cost manufacturing processes make conjugated polymers ideal laser gain materials. In recent years, conjugated polymer lasers have become an attractive research direction in the field of organic lasers and numerous breakthroughs based on conjugated polymer lasers have been made in the last decade. This paper summarizes the recent progress of the subject of laser processes employing conjugated polymers, with a focus on the photoluminescence principle and excitation radiation mechanism of conjugated polymers. Furthermore, the effect of conjugated polymer structures on the laser threshold is discussed. The most common polymer laser materials are also introduced in detail. Apart from photo-pumped conjugated polymer lasers, a direction for the future development of electro-pumped conjugated polymer lasers is proposed.