Search

Shape-shifting polymers are widely used in various fields such as intelligent switches, soft robots and sensors, which require both multiple stimulus-response functions and qualified mechanical strength. In this study, a novel near-infrared-light (NIR)-responsible shape-shifting hydrogel system was designed and fabricated through embedding vinylsilane-modified carbon nanotubes (CNTs) into particle double-network (P-DN) hydrogels by micellar copolymerisation. The dispersed brittle Poly(sodium 2-acrylamido-2-methylpropane-1-sulfonate) (PNaAMPS) network of the microgels can serve as sacrificial bonds to toughen the hydrogels, and the CNTs endow it with NIR photothermal conversion ability. The results show that the CNTs embedded in the P-DN hydrogels present excellent mechanical strength, i.e., a fracture strength of 312 kPa and a fracture strain of 357%. Moreover, an asymmetric bilayer hydrogel, where the active layer contains CNTs, can achieve 0°–110° bending deformation within 10 min under NIR irradiation and can realise complex deformation movement. This study provides a theoretical and experimental basis for the design and manufacture of photoresponsive soft actuators. [ABSTRACT FROM AUTHOR]

Shape-shifting polymers usually require not only reversible stimuli-responsive ability, but also strong mechanical properties. A novel shape-shifting photochromic hydrogel system was designed and fabricated by embedding hydrophobic spiropyran (SP) into double polymeric network (DN) through micellar copolymerisation. Here, sodium alginate (Alg) and poly acrylate-co-methyl acrylate-co-spiropyran (P(SA-co-MA-co-SPMA)) were employed as the first network and the second network, respectively, to realise high mechanical strength. After being soaked in the CaCl2 solution, the carboxyl groups in the system underwent metal complexation with Ca2+ to enhance the hydrogel. Moreover, after the hydrogel was exposed to UV-light, the closed isomer of spiropyran in the hydrogel network could be converted into an open zwitterionic isomer merocyanine (MC), which was considered to interact with Ca2+ ions. Interestingly, Ca2+ and UV-light responsive programmable shape of the copolymer hydrogel could recover to its original form via immersion in pure water. Given its excellent metal ion and UV light stimuli-responsive and mechanical properties, the hydrogel has potential applications in the field of soft actuators. [ABSTRACT FROM AUTHOR]

Polyampholyte (PA) hydrogels are randomly copolymerized from anionic and cationic monomers, showing good mechanical properties owing to the existence of numerous ionic bonds in the networks. However, relatively tough PA gels can be synthesized successfully only at high monomer concentrations (CM), where relatively strong chain entanglements exist to stabilize the primary supramolecular networks. This study aims to toughen weak PA gels with relatively weak primary topological entanglements (at relatively low CM) via a secondary equilibrium approach. According to this approach, an as-prepared PA gel is first dialyzed in a FeCl3 solution to reach a swelling equilibrium and then dialyzed in sufficient deionized water to remove excess free ions to achieve a new equilibrium, resulting in the modified PA gels. It is proved that the modified PA gels are eventually constructed by both ionic and metal coordination bonds, which could synergistically enhance the chain interactions and enable the network toughening. Systematic studies indicate that both CM and FeCl3 concentration ( C FeCl 3 ) influence the enhancement effectiveness of the modified PA gels, although all the gels could be dramatically enhanced. The mechanical properties of the modified PA gel could be optimized at CM = 2.0 M and C FeCl 3 = 0.3 M, where the Young's modulus, tensile fracture strength, and work of tension are improved by 1800%, 600%, and 820%, respectively, comparing to these of the original PA gel. By selecting a different PA gel system and diverse metal ions (i.e., Al3+, Mg2+, Ca2+), we further prove that the proposed approach is generally appliable. A theoretical model is used to understand the toughening mechanism. This work well extends the simple yet general approach for the toughening of weak PA gels with relatively weak chain entanglements. [ABSTRACT FROM AUTHOR]

Stimuli-responsive hydrogel actuators have attracted tremendous interest in switches and microrobots. Based on N-isopropylacrylamide (NIPAM) monomers with LCST phase separation and photochromic molecule spiropyran which can respond to ultraviolet light and H+, we develop a novel multistimuli-responsive co-polymer anisotropic bilayer hydrogel, which can undergo complex deformation behavior under environmental stimuli. Diverse bending angles were achieved based on inhomogeneous swelling. By controlling the environmental temperature, the bilayer hydrogels achieved bending angles of 83.4° and −162.4° below and above the critical temperature of PNIPAM. Stimulated by ultraviolet light and H+, the bilayer hydrogels showed bending angles of −19.4° and −17.3°, respectively. In addition, we designed a strategy to enhance the mechanical properties of the hydrogel via double network (DN). The mechanical properties and microscopic Fourier transform infrared (micro-FTIR) spectrum showed that the bilayer hydrogel can be well bonded at the interfaces of such bilayers. This work will inspire the design and fabrication of novel soft actuators with synergistic functions. [ABSTRACT FROM AUTHOR]

Hydrogels with high mechanical strength, good crack resistance, and good adhesion are highly desirable in various areas, such as soft electronics and wound dressing. Yet, these properties are usually mutually exclusive, so achieving such hydrogels is difficult. Herein, we fabricate a series of strong, tough, and adhesive composite hydrogels from polyampholyte (PA) gel reinforced by nonwoven cellulose-based fiber fabric (CF) via a simple composite strategy. In this strategy, CF could form a good interface with the relatively tough PA gel matrix, providing high load-bearing capability and good crack resistance for the composite gels. The relatively soft, sticky PA gel matrix could also provide a large effective contact area to achieve good adhesion. The effect of CF content on the mechanical and adhesion properties of composite gels is systematically studied. The optimized composite gel possesses 35.2 MPa of Young's modulus, 4.3 MPa of tensile strength, 8.1 kJ m−2 of tearing energy, 943 kPa of self-adhesive strength, and 1.4 kJ m−2 of self-adhesive energy, which is 22.1, 2.3, 1.8, 6.0, and 4.2 times those of the gel matrix, respectively. The samples could also form good adhesion to diverse substrates. This work opens a simple route for fabricating strong, tough, and adhesive hydrogels. [ABSTRACT FROM AUTHOR]

The structure, morphology, fracture toughness and flaw sensitivity length scale of chain-extended poly(butylene succinate) with various pre-stretch ratios were studied. PBS modification adopted from a multifunctional, commercially available chain-extension containing nine epoxy groups (ADR9) as the first step chain extension and hydroxyl addition modified dioxazoline (BOZ) as the second step. Time-temperature superposition (TTS) studies show that the viscosity increased sharply and the degree of molecular branching increased. Fourier transform infrared spectroscopy (FT-IR) confirm successful chain extension reactions. The orientation of the polymer in the pre-stretch state is such that spherulites deformation along the stretching direction was observed by polarized light optical microscopy (PLOM). The fracture toughness of sample (λfix = 5) is Γ ≈ 106 J m-2 and its critical flaw sensitivity length scale is Γ/Wc ≈ 0.01 m, approximately 5 times higher than PBS without chain-extension (Γ ≈ 2 × 105 J m-2 and Γ/Wc ≈ 0.002 m, respectively). The notch sensitivity of chain-extended PBS is significantly reduced, which is due to the orientation of spherulites more effectively preventing crack propagation. The principle can be generalized to other high toughness material systems. [ABSTRACT FROM AUTHOR]