Search

As one of the most promising candidates for all-solid-state sodium-ion batteries and sodium-metal batteries, polyvinylidene difluoride (PVDF) and amorphous hexafluoropropylene (HFP) copolymerized polymer solid electrolytes still suffer from a relatively low room temperature ionic conductivity. To modify the properties of PVDF-HEP copolymer electrolytes, we introduce the graphitic C3N4 (g−C3N4) nanosheets as a novel nanofiller to form g−C3N4 composite solid polymer electrolytes (CSPEs). The analysis shows that the g−C3N4 filler can not only modify the structure in g−C3N4CSPEs by reducing the crystallinity, compared to the PVDF−HFP solid polymer electrolytes (SPEs), but also promote a further dissociation with the sodium salt through interaction between the surface atoms of the g−C3N4 and the sodium salt. As a result, enhanced electrical properties such as ionic conductivity, Na+ transference number, mechanical properties and thermal stability of the composite electrolyte can be observed. In particular, a low Na deposition/dissolution overpotential of about 100 mV at a current density of 1 mA cm−2 was found after 160 cycles with the incorporation of g−C3N4. By applying the g−C3N4 CSPEs in the sodium-metal battery with Na3V2(PO4)3 cathode, the coin cell battery exhibits a lower polarization voltage at 90 mV, and a stable reversible capacity of 93 mAh g−1 after 200 cycles at 1 C. [ABSTRACT FROM AUTHOR]

In order to enhance the electrochemical performance and mechanical properties of poly(ethylene oxide) (PEO)-based solid polymer electrolytes, composite solid electrolytes (CSE) composed of single-ion conducting polymer-modified SiO2, PEO and lithium salt were prepared and used in lithium-ion batteries in this work. The pyridyl disulfide terminated polymer (py-ss-PLiSSPSI) is synthesized through RAFT polymerization, then grafted onto SiO2 via thiol-disulfide exchange reaction between SiO2-SH and py-ss-PLiSSPSI. The chemical structure, surface morphology and elemental distribution of the as-prepared polymer and the PLiSSPSI-g-SiO2 nanoparticles have been investigated. Moreover, CSEs containing 2, 6, and 10 wt% PLiSSPSI-g-SiO2 nanoparticles (PLi-g-SiCSEs) are fabricated and characterized. The compatibility of the PLiSSPSI-g-SiO2 nanoparticles and the PEO can be effectively improved owing to the excellent dispersibility of the functionalized nanoparticles in the polymer matrix, which promotes the comprehensive performances of PLi-g-SiCSEs. The PLi-g-SiCSE-6 exhibits the highest ionic conductivity (0.22 mS·cm−1) at 60 °C, a large tLi+ of 0.77, a wider electrochemical window of 5.6 V and a rather good lithium plating/stripping performance at 60 °C, as well as superior mechanical properties. Hence, the CSEs containing single-ion conducting polymer modified nanoparticles are promising candidates for all-solid-state lithium-ion batteries. [ABSTRACT FROM AUTHOR]

One of the most critical challenges for commercialization of sodium-ion battery (SIB) is to develop carbon anodes with high capacity and good rate performance. Graphene would be an excellent SIB anode candidate due to its success in various kinds of batteries. Liquid-phase exfoliation (LPE) method is an inexpensive, facile and potentially scalable method to produce less-defected graphene sheets. In this work, we developed an improved, dispersant-assisted LPE method to produce graphene composite materials from raw graphite with high yield and better quality for SIB anode. Here, bacterial cellulose (BC) was used as a green dispersant/stabilizer for LPE, a "spacer" for anti-restacking, as well as a carbon precursor in the composite. As a result, the carbonized BC (CBC)/LPE graphene (LEGr) presented improved performance compared to composite with graphene prepared by Hummers method. It exhibited a specific capacity of 233 mAh g−1 at a current density of 20 mA g−1, and 157 mAh g−1 after 200 cycles at a high current density of 100 mA g−1 with capacity retention rate of 87.73%. This method not only provides new insight in graphene composites preparation, but also takes a new step in the exploration of anode materials for sodium-ion batteriesSIBs. [ABSTRACT FROM AUTHOR]

Simultaneous enhancement of conductivity and mechanical properties for polyaniline/polymer nanocomposite still remains a big challenge. Here, a reverse approach via in situ polymerization (RIP) of vinyl monomers in waterborne polyaniline dispersion was raised to prepare conductive polyaniline (GPANI)/polyacrylate (PMB) interpenetrating polymer (GPANI-PMB) nanocomposite. GPANI/PMB physical blend was simultaneously prepared as reference. The conductive GPANI-PMB nanocomposite film with compact pomegranate-shape morphology is homogeneous, ultraflexible and mechanically strong. With incorporating a considerable amount of PMB into GPANI via the RIP method, only a slight decrease from 3.21 to 2.80 S/cm was detected for the conductivity of GPANI-PMB, while the tensile strength significantly increased from 25 to 43.5 MPa, and the elongation at break increased from 40% to 234%. The water absorption of GPANI-PMB3 after 72 h immersion decreased from 24.68% to 10.35% in comparison with GPANI, which is also higher than that of GPANI/PMB. The conductivity and tensile strength of GPANI-PMB were also much higher than that of GPANI/PMB (0.006 S/cm vs. 5.59 MPa). Moreover, the conductivity of GPANI-PMB remained almost invariable after folding 200 times, while that of GPANI/PMB decreased by almost half. This RIP approach should be applicable for preparing conventional conductive polymer nanocomposite with high conductivity, high strength and high flexibility. [ABSTRACT FROM AUTHOR]