Search

Comparative docking is based on experimentally determined structures of protein‐protein complexes (templates), following the paradigm that proteins with similar sequences and/or structures form similar complexes. Modeling utilizing structure similarity of target monomers to template complexes significantly expands structural coverage of the interactome. Template‐based docking by structure alignment can be performed for the entire structures or by aligning targets to the bound interfaces of the experimentally determined complexes. Systematic benchmarking of docking protocols based on full and interface structure alignment showed that both protocols perform similarly, with top 1 docking success rate 26%. However, in terms of the models' quality, the interface‐based docking performed marginally better. The interface‐based docking is preferable when one would suspect a significant conformational change in the full protein structure upon binding, for example, a rearrangement of the domains in multidomain proteins. Importantly, if the same structure is selected as the top template by both full and interface alignment, the docking success rate increases 2‐fold for both top 1 and top 10 predictions. Matching structural annotations of the target and template proteins for template detection, as a computationally less expensive alternative to structural alignment, did not improve the docking performance. Sophisticated remote sequence homology detection added templates to the pool of those identified by structure‐based alignment, suggesting that for practical docking, the combination of the structure alignment protocols and the remote sequence homology detection may be useful in order to avoid potential flaws in generation of the structural templates library. [ABSTRACT FROM AUTHOR]

Structural characterization of protein‐protein interactions is essential for our ability to study life processes at the molecular level. Computational modeling of protein complexes (protein docking) is important as the source of their structure and as a way to understand the principles of protein interaction. Rapidly evolving comparative docking approaches utilize target/template similarity metrics, which are often based on the protein structure. Although the structural similarity, generally, yields good performance, other characteristics of the interacting proteins (eg, function, biological process, and localization) may improve the prediction quality, especially in the case of weak target/template structural similarity. For the ranking of a pool of models for each target, we tested scoring functions that quantify similarity of Gene Ontology (GO) terms assigned to target and template proteins in three ontology domains—biological process, molecular function, and cellular component (GO‐score). The scoring functions were tested in docking of bound, unbound, and modeled proteins. The results indicate that the combined structural and GO‐terms functions improve the scoring, especially in the twilight zone of structural similarity, typical for protein models of limited accuracy. [ABSTRACT FROM AUTHOR]

Abstract: The paper presents analysis of our template‐based and free docking predictions in the joint CASP12/CAPRI37 round. A new scoring function for template‐based docking was developed, benchmarked on the D ockground resource, and applied to the targets. The results showed that the function successfully discriminates the incorrect docking predictions. In correctly predicted targets, the scoring function was complemented by other considerations, such as consistency of the oligomeric states among templates, similarity of the biological functions, biological interface relevance, etc. The scoring function still does not distinguish well biological from crystal packing interfaces, and needs further development for the docking of bundles of α‐helices. In the case of the trimeric targets, sequence‐based methods did not find common templates, despite similarity of the structures, suggesting complementary use of structure‐ and sequence‐based alignments in comparative docking. The results showed that if a good docking template is found, an accurate model of the interface can be built even from largely inaccurate models of individual subunits. Free docking however is very sensitive to the quality of the individual models. However, our newly developed contact potential detected approximate locations of the binding sites. [ABSTRACT FROM AUTHOR]

ABSTRACT Structural characterization of proteins is essential for understanding life processes at the molecular level. However, only a fraction of known proteins have experimentally determined structures. This fraction is even smaller for protein-protein complexes. Thus, structural modeling of protein-protein interactions (docking) primarily has to rely on modeled structures of the individual proteins, which typically are less accurate than the experimentally determined ones. Such 'double' modeling is the Grand Challenge of structural reconstruction of the interactome. Yet it remains so far largely untested in a systematic way. We present a comprehensive validation of template-based and free docking on a set of 165 complexes, where each protein model has six levels of structural accuracy, from 1 to 6 Å Cα RMSD. Many template-based docking predictions fall into acceptable quality category, according to the CAPRI criteria, even for highly inaccurate proteins (5-6 Å RMSD), although the number of such models (and, consequently, the docking success rate) drops significantly for models with RMSD > 4 Å. The results show that the existing docking methodologies can be successfully applied to protein models with a broad range of structural accuracy, and the template-based docking is much less sensitive to inaccuracies of protein models than the free docking. Proteins 2017; 85:470-478. © 2016 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

ABSTRACT Structural characterization of protein-protein interactions is essential for understanding life processes at the molecular level. However, only a fraction of protein interactions have experimentally resolved structures. Thus, reliable computational methods for structural modeling of protein interactions (protein docking) are important for generating such structures and understanding the principles of protein recognition. Template-based docking techniques that utilize structural similarity between target protein-protein interaction and cocrystallized protein-protein complexes (templates) are gaining popularity due to generally higher reliability than that of the template-free docking. However, the template-based approach lacks explicit penalties for intermolecular penetration, as opposed to the typical free docking where such penalty is inherent due to the shape complementarity paradigm. Thus, template-based docking models are commonly assumed to require special treatment to remove large structural penetrations. In this study, we compared clashes in the template-based and free docking of the same proteins, with crystallographically determined and modeled structures. The results show that for the less accurate protein models, free docking produces fewer clashes than the template-based approach. However, contrary to the common expectation, in acceptable and better quality docking models of unbound crystallographically determined proteins, the clashes in the template-based docking are comparable to those in the free docking, due to the overall higher quality of the template-based docking predictions. This suggests that the free docking refinement protocols can in principle be applied to the template-based docking predictions as well. Proteins 2016; 85:39-45. © 2016 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

ABSTRACT Structural characterization of protein-protein interactions is important for understanding life processes. Because of the inherent limitations of experimental techniques, such characterization requires computational approaches. Along with the traditional protein-protein docking (free search for a match between two proteins), comparative (template-based) modeling of protein-protein complexes has been gaining popularity. Its development puts an emphasis on full and partial structural similarity between the target protein monomers and the protein-protein complexes previously determined by experimental techniques (templates). The template-based docking relies on the quality and diversity of the template set. We present a carefully curated, nonredundant library of templates containing 4950 full structures of binary complexes and 5936 protein-protein interfaces extracted from the full structures at 12 Å distance cut-off. Redundancy in the libraries was removed by clustering the PDB structures based on structural similarity. The value of the clustering threshold was determined from the analysis of the clusters and the docking performance on a benchmark set. High structural quality of the interfaces in the template and validation sets was achieved by automated procedures and manual curation. The library is included in the Dockground resource for molecular recognition studies at . Proteins 2015; 83:1563-1570. © 2014 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

ABSTRACT Structural characterization of protein-protein interactions is essential for our ability to understand life processes. However, only a fraction of known proteins have experimentally determined structures. Such structures provide templates for modeling of a large part of the proteome, where individual proteins can be docked by template-free or template-based techniques. Still, the sensitivity of the docking methods to the inherent inaccuracies of protein models, as opposed to the experimentally determined high-resolution structures, remains largely untested, primarily due to the absence of appropriate benchmark set(s). Structures in such a set should have predefined inaccuracy levels and, at the same time, resemble actual protein models in terms of structural motifs/packing. The set should also be large enough to ensure statistical reliability of the benchmarking results. We present a major update of the previously developed benchmark set of protein models. For each interactor, six models were generated with the model-to-native Cα RMSD in the 1 to 6 Å range. The models in the set were generated by a new approach, which corresponds to the actual modeling of new protein structures in the 'real case scenario,' as opposed to the previous set, where a significant number of structures were model-like only. In addition, the larger number of complexes (165 vs. 63 in the previous set) increases the statistical reliability of the benchmarking. We estimated the highest accuracy of the predicted complexes (according to CAPRI criteria), which can be attained using the benchmark structures. The set is available at . Proteins 2015; 83:891-897. © 2015 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

ABSTRACT Characterization of life processes at the molecular level requires structural details of protein-protein interactions (PPIs). The number of experimentally determined protein structures accounts only for a fraction of known proteins. This gap has to be bridged by modeling, typically using experimentally determined structures as templates to model related proteins. The fraction of experimentally determined PPI structures is even smaller than that for the individual proteins, due to a larger number of interactions than the number of individual proteins, and a greater difficulty of crystallizing protein-protein complexes. The approaches to structural modeling of PPI (docking) often have to rely on modeled structures of the interactors, especially in the case of large PPI networks. Structures of modeled proteins are typically less accurate than the ones determined by X-ray crystallography or nuclear magnetic resonance. Thus the utility of approaches to dock these structures should be assessed by thorough benchmarking, specifically designed for protein models. To be credible, such benchmarking has to be based on carefully curated sets of structures with levels of distortion typical for modeled proteins. This article presents such a suite of models built for the benchmark set of the X-ray structures from the D ockground resource (http://dockground.bioinformatics.ku.edu) by a combination of homology modeling and Nudged Elastic Band method. For each monomer, six models were generated with predefined Cα root mean square deviation from the native structure (1, 2, ..., 6 Å). The sets and the accompanying data provide a comprehensive resource for the development of docking methodology for modeled proteins. Proteins 2014; 82:278-287. © 2013 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

ABSTRACT The increasing amount of structural information on protein-protein interactions makes it possible to predict the structure of protein-protein complexes by comparison/alignment of the interacting proteins to the ones in cocrystallized complexes. In the predictions based on structure similarity, the template search is performed by structural alignment of the target interactors with the entire structures or with the interface only of the subunits in cocrystallized complexes. This study investigates the scope of the structural similarity that facilitates the detection of a broad range of templates significantly divergent from the targets. The analysis of the target-template similarity is based on models of protein-protein complexes in a large representative set of heterodimers. The similarity of the biological and crystal packing interfaces, dissimilar interface structural motifs in overall similar structures, interface similarity to the full structure, and local similarity away from the interface were analyzed. The structural similarity at the protein-protein interfaces only was observed in ∼25% of target-template pairs with sequence identity <20% and primarily homodimeric templates. For ∼50% of the target-template pairs, the similarity at the interface was accompanied by the similarity of the whole structure. However, the structural similarity at the interfaces was still stronger than that of the noninterface parts. The study provides insights into structural and functional diversity of protein-protein complexes, and relative performance of the interface and full structure alignment in docking. Proteins 2013; 81:2137-2142. © 2013 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]